New 1/4" ASME Safety relief Valve 125 PSI American made

• 1/4" Safety Valve 119 SCFM - 125 PSI
• Free Shipping
• 51 mm Tall x 17.5 hex
• ASME Certified & stamped w/ UV & UB stamps

Nice Quality part--Made in the USA! Much better than cheap pop off valve that was on compressor from factory. What more can you say?!

Buy New 1/4" ASME Safety relief Valve 125 PSI American made Now

This is a very good, excellent made valve to keep pressure levels safe in air compressors. I also Liked the free shipping with this product.

Read Best Reviews of New 1/4" ASME Safety relief Valve 125 PSI American made Here

Had to replace a few things because this compressor is 20 years old. The replacement worked very well.

The main problem was the check valve leaking and causing the compressor to cycle every few hours so I replaced

a few things, this among them.

Porter-Cable FC350A Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer

• Uses 30 degree to 34 degree 2-inch to 3-1/2-inch by .113-inch to .131-inch paper collated clipped-head framing nails
• Power to drive nails (up to 3-1/2-inch by .131-inch) into engineered lumber
• Compact body design for better balance and style
• Consistent power on every shot with internal piston catch mechanism
• Selectable trigger - restrictive or contact actuation mode;Tool-free depth-of-drive adjustment with detents for proper setting of nail heads

This new nailer (the FC350A) is one great tool. Very powerful, a good range of nail sizes, not too heavy, works well even in the lower psi range. Well made, simple to maintain. I chose the clipped head over the full round head because the magazine doesn't stick out quite so far. Which leads me to the caveat. If you search for nails for this gun, you'll see many manufacturers stating compatibility. Also, you'll see sites quoting the gun works with nails strips from 30 to 34 degrees. This is not so! You *must* have nails strips of 34 degrees, except for the shortest length nails. Why? If you go to Home Depot and purchase a box of 3 inch nails, clipped head paper collated, like those from Grip-Rite (who state compatibility with the FC350) you'll notice they are 33 degrees instead of 34. This one degree difference means that longer nails don't get punched by the nailer the impact head just slides down the nail. Shorter 33deg nails sometimes work because their short length means the head is more in line with the impact head. So really the problem is in trying to obtain 34 degree paper collated nail strips. I've tried everywhere, including all the merchants listed on the PorterCable website. I finally ordered online from www.circlesaw.com who have the right range. It's a great tool, it's just a pain in the $%#$% to get the right nails, at least right now. Maybe it's still early days.

Buy Porter-Cable FC350A Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer Now

I'm not sure why someone experienced problems with the 33 degree nails from grip-rite at Home Depot. I bought the FC350A nailer from Amazon and bought a box of 3 1/4 inch x .131 hot dipped galvanized nails from Home Depot. The nailer and the nails work great for me! I really love the size of this nailer. Very nice improvement over the older version. The price from Amazon is also very competitive. I am extremely pleased!!!!

Update After running several hundred Nails through this nailer, I stand by my earlier conclusions. I have not had any problems with the Grip-Rite nails from Home Depot. I plan to try the Paslode 30 degree nails in this nailer. Great Nailer!!!

I built many projects with this nailer including a pool fence, framed decks, framed buildings and framed my basement. I stand by my earier comments. This nailer is superb and the Home Depot nails work fine!

Read Best Reviews of Porter-Cable FC350A Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer Here

I bought one of these guns back in the beginning of 2004. I have 4 now. It's very well balanced. It drives 3 1/4 nails in lam beams with ease. As long as the preasure is right on the compressor. I like the switch on the trigger for the sequential or bump fire. And then the depth knob on the nose is handy too. I sold off my two Dewalts, two Sencos, and Craftsman framers because I never used them after I got this one. It loads like a Senco from the bottom of slide. Makes for a quick reload. Mine all have cases too which is nice. The only framer I have beside these guns is my Paslode. This gun is the right size with short magazine gets into tight spots. I have only had one problem with one them the drive broke but it was under warranty. If you want a gun that will please and take a beating at good price get this one.

Want Porter-Cable FC350A Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer Discount?

I'm a computer nerd with an air compressor & pnumatic power tools. The only thing more dangerous is a father with a camcorder. I know this because I have all the above. I bought this clipped head nailer to finish off the basement, to build an office for myself to give the family more room upstairs. This thing works GREAT! This is so awesome. I put up a new wall in NO TIME, then I started looking for more projects. Standard building code puts studs 16" apart, such restraints are unnecessary when you wield such power as this. Be careful as you may find yourself nailing studs perpindicular just to keep the adrenaline flowing, or worse, tearing out old sheetrock walls to see if they "have enough support". You'll start looking for projects once you have this. I bought this because it was cheaper to buy a $100 air compressor and this $200 gun than pay someone $500 in labor to put a wall up for me [Insert Tim the tool-time Taylor grunt here]. My wife fears that we're going to be living in the next Winchester Mansion and has forbidden me from buying any more nails. No worries though, I'm not even half way through the first box of 2,500. Muhahahahaha!

Save 56% Off

Bought this gun to reframe a old gargage. Couldn't ask for any thing better. The best feature is the selectible trigger, when nailing location really matters. Never had a jam or unsunken nail.

Legacy L8306 3/8-Inch x 75 Retractable Air Hose Reel

• Levelwind layering mechanism ensures the hose retracts evenly and easily
• 3/4-inch ID swivel reduces flow restrictions and improves performance
• User can select "Free Run" for fast rewind or "Latching" to latch the hose
• Mounting bracket allows the user to secure the reel in 1 of 7 positions
• Includes hose

This Legacy L8306 3/8" x 75' Retractable Air Hose Reel is very nice, I am just a guy who likes neet work areas such as my garage and basement, I have a 50' retractable air hose reel from another manufacturer and it is not nearly as nice, I really like the way it retracts the line and reels the hose back and forth so it doesn't get tangled internally, in my garage I had my old unit hard plummed but had to add another piece of galvanized pipe to make up for the short 3' lead, if you can swing it opt for the 75 ft. and not the 50 ft. the extra 25 ft. makes a difference I no longer have to run a second line

Buy Legacy L8306 3/8-Inch x 75 Retractable Air Hose Reel Now

This review was precipitated not so much by the quality of the L8306 Legacy air hose reel, as it was by the Legacy's customer service actions. Upon opening my new Legacy L8306 reel, it quickly became apparent that the 3' lead-in hose was woefully short. While I can envision some utilizing a 3' lead-in hose, it would likely only be those with vertical air compressors mounting their Legacy reel in VERY CLOSE proximity to the compressor...and in direct line so as not to have any acute hose bends. The vast majority of reel users either would have to have hard-wired air systems, or simply use a 25' or 50' air hose to bridge the lineal space gap between compressor and reel mounting position. I fell into the latter category.

I had many 50' reels of air hose lying around, and could have used one of these hoses to bridge the compressor / reel gap...but the more I got to thinking about it, the more irritated I became. After all, this hose reel is not cheap in price...adding an extra 7' of air hose would surely add very little real cost to Legacy. After years of running a large manufacturing firm, I logically assumed some CFO or other financial wizard concluded that reducing the lead-in hose from 10' to 3' would add 0.0000001% to Legacy's bottom line. No doubt that financial gain was real...but at what intangible cost to Legacy as a company? Remaining PO'd, I stopped my installation and found Legacy on line, and dropped them an email stating that a company's financial gain can be dramatically offset via longer term customer dissatisfaction. To my pleasant surprise, I quickly received a polite email response from Legacy, stating "We take a lot of pride in our products and always aim to please. The length that we provide is based on what is most often recommend by our distributors and customers. Many people place their reels very near to the source and therefore only need a few feet of hose for their lead in. We also are aware that there can be a need for longer lead-in hoses depending on the layout of the shop. Because we recognize that there is still a demand for this, we do offer various sizes of lead-in hoses. I am having a 10' lead in hose sent to the address that you provided below. I hope that you will continue to purchase Legacy products. Have a great weekend!" I received my free 10' lead-in hose in short order.

While I still do not agree with Legacy's customer rep statement that "The length that we provide is based on what is most often recommend by our distributors and customers..." reflects most users' needs, I remain duly impressed with Legacy's customer service business acumen. I also add that NO WHERE on line could I find longer Legacy (or other manufacturer's brands)lead-in hoses, as Legacy lead-in hoses require a male end fitting for their specific units. If I could have found a longer lead-in hose, I would have simply purchased it...I would still be burned up...but would not have been irate enough to contact Legacy.

But enough ranting...my heart soars to find an industry that is attentive to customers. Yes, the reel seems OK...lots of plastic, but functionally all there. And yes, I'm confident that some Legacy bean counter still sticks to his/her guns about "desirable" lead-in hose lengths. Perhaps if enough customers voiced their opinions, the noted Legacy bean counter would be chastised as those involved in actual Legacy operations and sales applauded.

Read Best Reviews of Legacy L8306 3/8-Inch x 75 Retractable Air Hose Reel Here

I've not used this much yet and this is the first retractable reel I have ever owned. It works pretty well except at times there is a certain point in the retracting process that it is slow in reeling the hose up. It just may need for the spring tension to be adjusted. I'll revisit this review after I do that.

I've used this now for 3+ months and I really like it. The only negative I've found is on cold days (Below 40) it is slow rolling the hose back in which I contribute to the hose being too stiff. A more supple hose would make this much better!

Want Legacy L8306 3/8-Inch x 75 Retractable Air Hose Reel Discount?

So Far this Retractable Air Hose Reel is much better than the old retractable hose reel I replaced. I particularly like the feature that the hose is evenly distributed around the drum as it retracts. I also like the way the hose reel catches when you are reeling it out to use. All you have to do is pull out how much hose you want and listen for it to click and then stop. You have the correct amount of hose to use. It is also a sturdy unit and I am very happy with it. The price from Amazon.com was less than any other marketer I could find. I highly recommend other people purchase this product.

1000 lb Hydraulic Motorcycle Bike Lift Table Jack Service Stand Shop Ramp Drop Panel

• No air compressor needed ; Hydraulic foot pedal allows a hands free operation without bending over
• Deluxe hydraulic ram will easily lift motorcycles up to 1000 lbs
• Motorcycle lift includes an oversize front tire clamp for extra security
• 24" Loading ramp, rubber wheels, drop out panel
• 13-1/2" x 19-1/2" rear tire drop panel is standard with TMS motorcycle lift units

This jack has the drawback of not allowing one person to load the motorcycle. The procedure does not have a kickstand rest or any way of balancing the bike while the tiedowns are put in place because there is no place to rest your feet to hold the bike upright. Hinged metal plates are needed to provide foot and kickstand support.

Buy 1000 lb Hydraulic Motorcycle Bike Lift Table Jack Service Stand Shop Ramp Drop Panel Now

got lift had broke off support piece (had to have it welded ) missing pieces. lift crashes down all at once . will not go down slowly ! VERY DANGEROUS ! manufacturer will not do anything .

Read Best Reviews of 1000 lb Hydraulic Motorcycle Bike Lift Table Jack Service Stand Shop Ramp Drop Panel Here

I recently purchased this lift for my home bike shop and am quite pleased with it. The lift was easy to assemble and seems well constructed. The height at full extension is sufficient and it should be able to handle any bike I would need to put on it. The only complaint I have is that it takes so many strokes on the hydraulic cylinder's foot pedal to raise the bed to full extension. I would give this product 4 stars.

Want 1000 lb Hydraulic Motorcycle Bike Lift Table Jack Service Stand Shop Ramp Drop Panel Discount?

I have been looking for a product like this for a long time. I have a very limited space (1 car garage)just the right size, stable & the right price. No more working on my knees, makes working on my bike/bikes more enjoyable.

Maxair C5160V1-MAP 60-Gallon 170 PSI Max Electric Stationary Compressor

• 5HP electric motor
• Extended drain at base
• 18.5 CFM at 100 PSI
• 60-gallon vertical tank
• Heavy duty belt guard; high performance

I had a similar sized Puma which lasted for about 16 years, but needed repairs occasionally and eventually wound up developing a crack in the top of the tank. This one has higher pressure and more CFMs, and a much heavier duty pressure switch. I had to replace the undersized pressure switch on my Puma twice. The motor is huge and looks about 50% bigger than the one on my Puma. The compressor runs a little quieter and seems to run a lot cooler. It seems really solidly built and well thought out. The tank has a higher pressure rating. It has a really convenient extended drain valve that's easy to reach right at the lower front of the tank, rather than underneath the tank. It has cast iron cylinders, three separate air filters, copper finned copper tubes where the compressor feeds into the tank to help cool down the air before it gets into the tank, and a big fan/flywheel. The oil level site glass on the pump is easy to see, and the oil fill is in a convenient location. It has a nice large liquid filled pressure gauge that holds steady and is located for easy visibility. The pressure switch is on the side, where it's easier to get to and easier to wire up. The air coming out of it is nice and dry, with no oil blow-by from the compressor. I wanted something that will be really reliable and put out enough pressure to run all of the tools I use. The old Puma was almost good enough, but I think this one will be perfect.

I use this fairly often for, painting, bead blasting, air tools, cutting tools, plasma cutter, etc. Works like a champ so far, and I'm really happy with it. Would definitely recommend it to anyone who wants to pay a little more for a good quality compressor.

One more thing I like about it is the three feet it has instead of four like some other brands. The feet have slotted holes, so your holes can be slightly off in alignment from the holes you drill in the concrete and it will still work. I think you definitely want to bolt it down. It's very top heavy and needs to be bolted securely to the ground. I have mine on a 6" thick slab with a little home-made wood shed around it which I located out behind my garage. I used three 3/8" "drop in anchors" to bolt it down, but you could probably use 1/2" too if you wanted to.

Black O Ring Clear Plastic Oil Liquid Level Sight Glass for Air Compressor

• Material: Plastic
• Color: Clear, Black, Red
• Thread Diameter: 24mm/ 0.94"
• Overall Size: 35 x 18mm/ 1.4" x 0.7" (D*T)
• Package Content: 1 x Oil Level Sight Glass

Bought it on a hunch that it may or not fit my compressor. My old sight glass started to leak oil through the front glass seal. It was cheap enough to take the risk and I lost. It would be nice if they had given the thread size. They show 24mm dia. but not the ACTUAL thread type or size. My compressor fits now a 1/2" NPT blank plug. This item may be an oddball at 24mm and may fit a 5/8" NPT as 1/2" is too small and a 3/4" is too big. Maybe I can re tap the hole in the compressor or try to find an adapter.

One good thing the shipping was quicker than anticipated

DeWalt D55155 Compressor Replacement Regulator Repair Kit # N008792

• Genuine OEM Replacement Part # N008792
• Compatible with many Dewalt and Porter Cable Compressors.
• What's included : (1) Replacement REGULATOR REPAIR KIT # N008792
• New, bulk packaged
• Please refer to list below for compatibility

The instructions are just a diagram with international symbols. Just look at yours as you take it apart. You have to figure out how to take the handle apart though. I still gave it 5 stars because it was cheap and fixed the problems I was having. Took about 45 mins for the whole job.

Buy DeWalt D55155 Compressor Replacement Regulator Repair Kit # N008792 Now

Received this repair kit in a short time. I have disassembled the regulator and installed the new parts. No more leaks.

Read Best Reviews of DeWalt D55155 Compressor Replacement Regulator Repair Kit # N008792 Here

This kit fits a wide variety of regulators; my compressor is a Porter Cable model 330 Job Boss. The kit arrived earlier than expected, was easy to install, and the regulator is now functioning flawlessly. As good as it gets.

Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose

• Economical 50-foot air hose
• 0 to 130-degree (F) working temperature
• PVC construction provides lightweight handling and heavy-duty durability
• Includes male 1/4-inch NPT fittings on both ends
• 3/8-inch by 50 feet long; weighs 4.1 pounds shipped

This vinyl hose definitely serves its purpose and I am pleased wit it. It is less than half the price of a rubber hose. Since I only use the hose occasionally I felt I did not need a better one. This hose is durable but could be a little more pliable. If you use the hose a lot (like every day) it may be better for you to purchase a rubber hose.

Buy Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose Now

Seems like a quality air hose for the money. I have used it for a couple of weeks on a construction site and has held up well.

Read Best Reviews of Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose Here

For the price the Campbell Hausfield 50Ft x 3/8 air hose is fair deal. I bought this hose because I needed some additonal reach to make it easier to use my air nailer for inside trim work. It seems durable enough, but because it is PVC it is very stiff when cold and holds the coiled shape making it unwieldy. If you want flexibility and ease of use opt for rubber hose.

Want Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose Discount?

Economical hose with necessary attachments. Seems rugged enough for any home handyman's uses!

Save 16% Off

I am sure this one would work fine, but needed one that was more flexible.