4 Ton 13 Seer Goodman Air Conditioner R-22 - GSC130481

• Runs on R-22 refrigerant
• Comes charged with Nitrogen to hold pressure - refrigerant NOT included
• Outdoor unit only
• Replacement outdoor unit on older R22 systems

Had one of these installed today and so far it really cools well & is very quiet. Has 5 year warranty so no worries there. This replaced my 11 year old Yorx which had a fried compressor. Needs a competent installer to assure a full & correct install.

Save 29% Off

Campbell Hausfeld FP209499 3-Gallon Air Compressor

• User-friendly design and control panel
• Three-gallon tank for greater stored air power
• Cooler-running motor
• Tank eliminates pulsations caused by piston action
• Accessory kit included

This compressor is ok for inflating balls & tires, but beyond that it's pretty much worthless. It's 'rated' to 100 PSI but getting this thing to maintain even 80 for more than 2 seconds is impossible. Also, one of the reasons I purchased this packages is because I thought I wouldn't need to get a lot of additional stuff because it came with a hose and accessories. The hose has to be one of the worst quality products I have ever seen. It is brittle plastic with NO flex whatsoever, and i'm afraid any amount of movement will snap the dang thing right off. If you want a compressor for anything more than tires/balls look elsewhere you truly get what you pay for here.

Buy Campbell Hausfeld FP209499 3-Gallon Air Compressor Now

Great little air compressor, very lightweight and portable and does not take up a lot of space in my utility room. Works great with the hitachi NT50AE2 brad nailer I bought, I get about 40 or so nails before it needs to refill the tank. Glad I bought this separately from my nailer rather than buying one of the branded "kits" that includes three nailers (two of which you probably don't need). The only complaint I have is that the compressor came with a crappy plastic hose. The other accessories were fine (quick changes, tire fill fittings, etc) but the hose looked like it would burst if I stepped on it by accident or just looked at it funny. I bought the 50' yellow rubber good year hose recommended by others and it is working out really well.

Read Best Reviews of Campbell Hausfeld FP209499 3-Gallon Air Compressor Here

I purchased this as a tire inflator/blower/air tool compressor. It's light duty, makes noise like a small compressor does, but works, has good features, and for the price is very capable. I mention the noise because people are always surprised by how noisy air compressors are. It's not designed for big air tools and the like, but is very useful for homeowners like myself.

Want Campbell Hausfeld FP209499 3-Gallon Air Compressor Discount?

I like to read the all the negative reviews before purchasing a product. After reading the reviews on this compressor I was a little concerned it might not do the job, but I took a chance because frankly I am flat broke and the price was right. I also knew if it was as bad as some made it sound, Amazon would make it right.

Some negative reviews complained about leaks: I have not seen this problem. All I can say is unless you get a defective unit and if you know how to put thread tape on (supplied), you should have no leaks. I can charge the compressor to 110 psi and if I don't use it, the next day it is still at 110 psi.

Some negative reviews also complained about noise: Yes, it is loud. However, it is no louder than I expected. The reviews made it sound like I would need ear protection to work around it. All I can think is that there was something wrong with their compressor, or they never listen to their music on 11...ever. :-)

I purchased this for a nail gun. It does an excellent job. I get 40 or more nails on a 110 psi charge and it takes under 6 minutes to go from empty to 110 psi. The light weight makes it easy to move as work progresses. After 40 or so nails, a quick coffee break while it recharges. A great little compressor and it is an outstanding price.

I don't know how well it will work for other types of applications, but for home projects, specifically nail gun projects, it is perfect. I am impressed and I give it my endorsement!

Save 43% Off

No complaints here. This product did exactly what it was supposed to and has given us no problems. Even better I saw it in Advanced Auto Parts a couple weeks back for TWICE what we paid on Amazon! SCORE!

Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor

• Hobart AirForce 250ci lightweight plasma cutter with air compressor, powered by standard household current
• Designed to cut up to 1/4-inch mild steel; uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals
• Use it for a more precise cut, thinner kerf, and less slag to clean up with faster cuts than oxy fuel
• Includes 16.5-foot heavy duty work clamp, 7 -foot power cord with 115 VAC plug, extra replacement tips, and a convenient cable management strap
• 10-by-7-1/2-by-13-inches at 27-pounds; backed by Hobart limited warranty

Perfect little machine for the home hobbiest. I bought this machine for sheet metal work and the ocassional 1/4" chunk. Cuts like butter through thin steel, takes a little more time on the 1/4" stuff. But its alot cheaper to operate on sheet metal and mild steel than oxy-acetylene. Best feature of this unit is not having to adjust a single thing, no air pressure, no amperage adjustment. Just pull the trigger and cut away.

Buy Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor Now

I bought this Plasma cutter for cutting sheet metal and various Rusty parts off my 76 Trans Am and I must say for the size of this little box and the cost, I'm very impressed. The unit is like they say plug in and play. I found it very easy to fit into my Hobart upright cart along with my Hobart Handler 140 (also an awesome welder) so if you're concerned about size, don't be, it's about the size of 2 six packs. Key features I like about it are that I don't need to use my air compressor on it, it has one built in. This way I don't have to adjust the regulator or any. Also, it only throws sparks about 1-2ft, I've heard horror stories of Plasma cutters throwing sparks for 4-6ft. I'm working in a small one car garage and I don't like having to worry about fires and such when working. Now as for cutting depth. The book states it can do 1/4in thick steel. I believe if you have perfect conditions it can do this with a pass or two. I have found in my own experience that it will at least cut 1/8th to 3/16th. (I had to cut off my rear frame off my car and it worked great.) And as for 20-22gauge steel, it'll cut through that like butter.

Now the cons, he ground cable isn't very flexible. It seems almost as if it were solid wire instead of stranded. I'm comparing this to my welder's ground cable and it is much more flexible. Another con is that I'm not very good at it so it keeps turning on and off and when it turns off you have to wait for the compressor to refill (3-5sec) before you can start again. Not a huge con but annoying if impatience is a character trait. It does however run rather quiet, I can talk over the sound of the compressor. Other than that I can't really thing of other draw backs. They do come with a 3 year warranty from Hobart, I called hobart up and I talked to one of their repair technitions and he said he barely ever gets plasma cutters in, they mostly get welders that have been on the job site for 10-15 years. So I do agree that hobart is an AWESOME BRAND. So I my point with that is don't be afraid to purchase one used for a couple bucks less. It's worth it! I guess that about wraps it up.

Final Notes: I would recommend this to a friend for medium to light duty cutting. I would not recommend this to a daily use shop. I would suggest a size a bigger than this.

Biggest Con: Ground Cable flexibility

Biggest Pro: Aircompressor built in and uses 115v 20amp circuit.

Read Best Reviews of Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor Here

What truly sucks about this is that I waited too long to get it. All of the money spent on cut-off wheels, all of the time wasted at the grinding wheel fine tuning the parts... Bottom line; it will save you time, money, and provide you with that warm and fuzzy feeling we all strive for.

The good:

Built-in compressor. Turn on and go.

Small, lightweight, easy to move around.

Looooong hoses.

Mine doesn't have the stiff ground cable somebody else complained about. Don't know if this is a recent change.

Fairly good resale value.

The bad:

Make no mistake, this is a home unit. It will cut 1/4" steel, eventually... If you only cut thick pieces occasionally it will work fine. Clean cuts at 1/8" but still fairly slow.

Dinky guide, basically a folded thick wire. You will get good at using it but it will take time and in the process you will ruin some metal. If it had a better guide it would cut down the learning curve significantly.

Cool off period is annoying at first (you hit the trigger by mistake; you have to wait for the gun to finish blowing cool-off air before you can use it again). You get used to it.

Tips:

You may not be able to run it on a cheap extension cord. Mine kept going off. Plugging it straight into the wall fixed that.

Keep the opening end of the dinky guide pointing down (same direction as the hoses) and cut in a pulling motion, keeping the gun parallel with the cut. At first you think in some cuts it would be easier to flip the guide sideways and cut left-to-right. This inserts a new variable that makes accuracy much harder.

-Learn to relax your grip. two-handed, light touch will help you get better at it faster. Practice this with the gun off.

Want Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor Discount?

Bought refurbished model from Toolking and am very happy. Arrived promptly in like new shape. Cuts very well on smaller stock like 1/8 inch. Lag time for tip cooling after cut but very functional for the price and what I use it for. Would buy again or recomend for fellow hobby builder.

Save 27% Off

I was greatly disapointed with this. I had difficulty cutting even 14 gauge steel. I had to go extreemly slow, and got a very sloppy cut, because the power was so slow. It came with a extreemly cheap tip guide, made of a piece of bended wire. This kept rotating as it passed along my straight edge, causing further frustration. I guess you just expect more.

I wouldn't recommend buying this to any person, for any application.

Tru-Flate 17-351 1/4" Female NPT Direct Air Line Chuck With Shut-off

• Built in shut off valve
• 1/4 inch female NPT
• 150 PSI maximum air line pressure
• Cannot be used on inflator gauges

haha i cant belive im rating a air chuck but it is what it is and its a air chuck that works and is cheap

Buy Tru-Flate 17-351 1/4" Female NPT Direct Air Line Chuck With Shut-off Now

This air line chuck is much better constructed than the one I am replacing. It does not leak when pressurized, unlike my previous model.

TEKTON 4755 Oil/Water Separator

• Eliminates water buildup in air line
• Traps water vapor to maximize air tool performance and extend tool life
• Traps water and oil for a clean air spray job
• Installs easily between air tool and line
• Maximum air pressure: 150 psi

This filter does the job perfectly if you use it in the correct manner. A lot of people here are just using it wrong.

A. This is not a replacement for a larger "main" in-line water/oil separator. IE a 1/2, or 3/8 filter like;

http://www.amazon.com/Ingersoll-P39344-600-VS-2-Inch-Filter-Regulator-Piggyback/dp/B0057D8MCI/ref=pd_cp_hi_1

This unit is meant to be used at the input end of a paint spray gun, hence the low pressure. It not intended to run at 90+ PSI for something like an impact wrench or air hammer.

B. You can't hang this (or any water separator) right off your compressor and expect it to fill up with water. You need to provide room for the compressed air to condense the water out. IE 30+ feet of hose or pipe. I guarantee you if you don't see water after heavy use of your compressor move it to the end of a 50 foot hose and you will be draining it like a colonic bag!

C. Yes it's plastic. Would you rather have glass that would explode like a grenade the first time you drop it on the shop floor with it cranked up to 120psi?

D. The drain is on the bottom for a reason. See point A, its meant to be used while mounted at the end of a tool like a sprayer that remains upright. Not mounted on a hose that will lay on the floor.

I have mine at my spray gun behind 60 feet of plumbing and 2 other larger dedicated 3/8" water separators and it still collects a lot of water.

Buy TEKTON 4755 Oil/Water Separator Now

I wasn't sure if it will really work since it's not that expensive.... But it does!

I was spraying some paint and getting bubbles, so I got it for not-so-expensive investiment. Well, it worked and no bubble after that. I'm not the professional painter by any means but it works just fine for my need!!

Read Best Reviews of TEKTON 4755 Oil/Water Separator Here

I am using this unit inline with an HVLP spray gun on a large 60 gallon compressor. I do have compressor water filters at the compressor but wanted to be sure none got through to mar my spraying. This unit is small, and glass but the glass is very, very thick. I think you'd have to hit it with a hammer to break it. A small push pin in the bottom side of it releases any water collected.

Simple design and durable. It does the job.

Want TEKTON 4755 Oil/Water Separator Discount?

Good product. This has helped my air powered tools greatly by helping to keep the condensed water out of my tools.

Save 67% Off

I love this product, It removes all the water from my air line before it can get to my air tools, and water in air tools is bad, prolongs the life of all my tools.

Neiko Tools USA 20" Angle Nozzle Air Blow Gun with 1/2" Rubber Tip

• New Improved Valve Design for More Convenient, Faster, and Easier Use
• Comfortable Lever Control & Insulated Handle
• Ergonomic Grip
• High Impact Plastic Body with Build-In Hanger Slot
• Angled Nozzle Easily Gets Into Tight Spots

the picture shows a set of three you get just one... note really worth the money still have yet to test it. also it arrived in red and i don't see any rubber tip on it.

Buy Neiko Tools USA 20" Angle Nozzle Air Blow Gun with 1/2" Rubber Tip Now

This is a good quality blow gun. Seems to be fairly positive. Wish the body handle was metal but for the price it works quite well. The only thing I didn't like was the shipper put it in a box that had a dent in the side and clearly the box was stressed at that dent so the wand portion was bent like 15degrees and I had to carefully try to bend it back to straight without breaking it or destroying the plating on the wand area. But I did so succesfully and this thing is great for blowing out hard to reach areas.

Read Best Reviews of Neiko Tools USA 20" Angle Nozzle Air Blow Gun with 1/2" Rubber Tip Here

why make me write more than I want to, this is a waste of my time and now is a waste of everyone's time to read???

Want Neiko Tools USA 20" Angle Nozzle Air Blow Gun with 1/2" Rubber Tip Discount?

HI I WANT TO INFORM TO THE FUTURE CUSTOMERS THIS BLOW GUN IS VERY GOOD, BUT BE ON MIND THIS BLOW GUN IS NO GREEN COLOR , HIS REAL COLOR IS LIGHT RED.