24" Aluminum Air Blow Gun

• Easy to handle and direct for normal air clean

The air blow gun is what I wanted and was received very fast. The only problem is that it did not have the air piece on the trigger end that is needed in order to use it on your air hose. Since I live 30 miles from town, I had to spend money for gas and the additional part in order to use it. The air gun cost $6.00 and the the other cost was $11.00. So I guess you get what you pay for.

Buy 24" Aluminum Air Blow Gun Now

The "24" Aluminum Air Blow Gun " is a great tool to have on your work bench for cleaning your equipment. It's also useful ti clean out the truck bed behind your tool box. Just be careful when your working with this tool it may cause an injury to you are someone else.

Read Best Reviews of 24" Aluminum Air Blow Gun Here

Nothing special about this extension blow gun. Btu it was cheap and does it's purpose for the few times i need that extra reach.

LF10-4H

• 95-125 psi factory preset regulated, you can regulate as you need between 35-150 psi
• ¼" COMPRESSION UNLOADER VALVE
• ¼" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1/4" PORTS
• 20 AMPS
• Corrosion Resistant and Non Metallic Cover

The switch was everything it said it was in the ad . I installed it on a craftsman comp. it worked beautiful, I love it.I would definitely do bussiness with them again.

Buy LF10-4H Now

product is exactly as represented. not sure why i need more words but apparently more words are "required" for a rating?

Read Best Reviews of LF10-4H Here

They should ship this with adjustment instructions. There are two adjustment screws, one for the cut out and one for the differential. They are not marked and there is nothing to tell you which is which. Don't get me wrong, you will figure it out, but it would be nice to have an instruction sheet with it.

Want LF10-4H Discount?

The auto/off lever is a little short for how stiff it is, but other than that it works great! The only thing I would add is that it should have a diagram in it to tell what dirrection does what as far as the setting screws for high and low pressures. It was easy to figure out, but it would help.

This is just exactly what my husband was looking for. It fixed the problem and he is back up and going

Wagner 518080 Control Spray Max HVLP Sprayer

• Powerful Two Stage Turbine sprays latex, as well as thinner materials such as lacquers and stains
• Variable Air Pressure Control means less overspray with thin materials
• 20 Foot High Flex Air Hose extends your reach
• 3 spray patterns - select the best pattern for your job
• Variable flow control covers large spray surface down to detail work

I had purchased another Wagner sprayer to use refinishing my kitchen cabinets. Unfortunately, I bought the wrong model. After doing some cabinet doors and not being satisfied, I called Wagner technical support.

I described what I was attempting to do and the lady told me that I needed the Max HLVP unit.

I used it yesterday for the two base coats and then this morning for the top coat of polyurethane. I couldn't be happier with the results!

The unit is light and has plenty of power.

I was spraying heavy interior latex and then satin polyurethane.

It takes some playing to understand the best settings on power and flow. But, once you get those dialed in and are consistent in your spray angles and distance, the unit will give you professional results.

It is very easy to clean and comes with two cups for small and larger jobs.

I plan to use this to finish the balance of the kitchen cabinets and then on multiple other interior and exterior jobs.

Buy Wagner 518080 Control Spray Max HVLP Sprayer Now

This is just a quick review documenting my first (short) experience with this sprayer.

I just bought and tried this sprayer and so you understand, I know very little about these. The reason I bought this particular sprayer was cost and I figured that the outboard turbine would be more powerful that the ones with the turbine built on the handle.

I have previously owned an airless sprayer and it was useless except for jobs where quality wasn't important. The previous sprayer would constantly spit and I had no control over the spray pattern. I wasted a lot of paint painting a fence with it. Moving on...

I am getting ready to paint some rooms in my house and figured that I would try this sprayer to get an idea of how to use it before I got serious with it. I was using latex paint straight out of the can with no thinning... I was curious about how that would work. There are only three adjustments on this gun... air flow, paint feed, and spray pattern. I set the air flow at its lowest setting, pulled the trigger, and nothing came out. I kept increasing the air flow until I got a spray, which was (for the material I was using) near maximum output. Paint delivery was smooth and consistent, although the amount of paint coming out was less than ideal if you were painting a wall. I was only painting a door and frame. I tried the different spray patterns and they all worked as expected. Since there were no "stops" I was curious about where to turn the spray head to get the desired pattern. As it turned out, it was easy. You could "hear" and "feel" the air change as you turned the nozzle. The spray patterns were fairly tight and over spray was minimal. After I was done, clean up was a breeze compared to cleaning brushes and paint trays.

Three more things about its use... being a sprayer, I envisioned this cloud of paint being shot around the room getting on everything. That did not happen. I was also concerned about this being a non-bleeder type of HVLP, as "bubba" mentioned. The air never stops coming out of the nozzle, even when the trigger isn't being pulled. It didn't smear the paint and the air was free of paint when the trigger wasn't pulled. I also tried it with water with interesting results.

As for the door and frame... It looks great, much better than the last time I painted it with a roller and brush.

As I said, this is a preliminary review and I will report back after I finish the house. All I can really say is that with un-thinned latex paint and a small job, this product met and exceeded expectations.

What I have gleaned from this experience is that getting a good spray pattern is determined by the amount of air and the amount of paint being drawn into the air flow. If this is off, the results will be less than perfect.

More to come...

Read Best Reviews of Wagner 518080 Control Spray Max HVLP Sprayer Here

SUMMARY:

Great product for the money, but only for certain jobs! I would recommend it for any outside work, but would not recommend it for painting interior walls, as the effort required to minimize overspray and obtain the perfect dilution/spray velocity outweighs any gains in speed or ease of use.

DETAILS -FIRST ATTEMPT::WALLS

This Wagner has the most hits of any sprayer on the internet, and you can find many video blogs reviewing the product. However, what is lacking of sprayers in general are first-hand accounts of actual end users (especially first-time users). This Wagner is my first paint sprayer. Last year I repainted the entire inside of my house; walls, trim, doors, shelves and all in preparation to move out and get a new house. All of that work was done with traditional rollers and brushes. When we purchased our new house I was desparate to find some way to speed up the process. I researched many sprayers and read many reviews. I found many positive reviews for sprayers in the $800+ range, but was unwilling to commit to that kind of purchase having never used a sprayer. With the Wagner in the $100 range I figured even if it was a bust it was worth the effort.

The first two times I used the sprayer was to paint the walls in the dining room and kitchen area, as these were the smallest wall surface areas in the house, and had flooring that was soon to be replaced, so messes were of little concern. The sprayer is very easy to use -simply dump paint in the hopper, twist-n-lock the spayer assembly together, turn on the power, and push the trigger.

Having not ever used a sprayer before, my wife and I spent a great deal of time blue-taping and laying down dropcloths. I taped all trim and I ran a layer of tape along the ceiling where it butted up against the walls, just in case. I had planned to "practice" with all those safety things in place, then decide which I could forego in all the rest of the rooms.

It turned out that even the blue tape and dropcloths were not enough to keep all of the overspray out. During the process I stopped to go to the hardware store and purchase a paint shield and some painters paper. I added the painters paper to the ceiling and ended up having painters paper, blue tape, and a paint shield in place while painting the upper edge of the wall. I was disappointed to *still* have a small bit of overspray in a few area of the ceiling. I also tried diluting the paint and adjusting the velocity of the air, but never seemed to achieve the right combination. The problem with diluting is the paint can says, "See sprayer for dilution instructions", and the sprayer says, "See paint manufacturer for dilution instructions". I learned that too much dilution will cause the paint sprayer to "spit" and the paint to run.

In the end I completely abandoned the sprayer for the walls and went back to the tried-and-true rollers. I am sure I could have achieve the results I wanted with the sprayer, but it would have taken such a long time as to negate any benefits from the sprayer -the main reason I bought the thing was to hasten the painting process!

DETAILS -FIRST ATTEMPT::DOORS

After rolling all the walls, I decided to give the sprayer a second chance on the doors. I removed several doors and placed them outside against a wall lined with dropcloth. Taking a tip from a painter, I nailed paint stirs to the top of the doors to keep them from butting directly against the wall. After lining them all up, I filled the sprayer and got to work. This time I skipped the dilution; I went full strength and simply turned up the velocity all the way to get the paint flowing as I did not care about overspray.

This worked flawlessly! I have never painted doors this fast. In fact, these were all panel doors which are notoriously hard to paint with a brush. I kid you not that I had half a dozen doors, front and back painted in less than 30 minutes easily. I had some minor dripping on the first door, but after acclimating to the paint viscosity, all other doors look great!

CONCLUSION

For the money this is well worth the investment for anything other than painting interior walls. In fact, if you are used to using sprayers you probably will have success even on interior walls (if you do, please tell me how!). I can imagine painting fences, chairs and other items outside would be even easier than doors as literally no prep (dropcloths, etc.) would be needed.

Want Wagner 518080 Control Spray Max HVLP Sprayer Discount?

For those who are new to HVLP sprayers, there are two types of sprayers: bleeder and non-bleeder. This Wagner sprayer is a bleeder type sprayer. What this means is that once you turn on the sprayer, air will come out of the tip of the gun regardless if you pull the trigger. For thicker type paints like latex, you will have to turn up the air pressure to fully atomize the paint. This will blow alot of dust around your project and create alot of overspray. When you pull the trigger, it will allow paint to flow to the tip, and it will start spraying paint. You must move fairly quickly as you don't want the gun blowing air on your freshly painted are or else it will disturb the paint and cause streaks and runs. If you are a hardcore woodworker and will only settle for perfection, consider the Fuji Mini-Mite 3.

Save 17% Off

I have a 12 x 24' deck with railing and steps. Quite a chore to paint. I decided to try this Wagner 518080 HVLP sprayer. I actually looked for the same unit at the local big franchise stores and couldn't find this particular unit. I did find it online somewhere else but it was $127 quite a bit more than Amazon.

This sprayer is really simple and of course that's the beauty of it. I had a Wagner mechanical sprayer any did not last long or work very well but this unit uses what amounts to a reverse vacuum cleaner. Blowing the air out and threw a 20 foot flexible hose. The spray head is simple and only has three parts. The air blower unit as an adjustable air pressure/volume control which allows you to just for your project and paint requirements. Painting intricate rails and latticework is a breeze.

I did the whole deck with Olympic Maximum deck paint... This stuff is thick but sprayer had no problem with it whatsoever. I use the sprayer few times and each time it's ready to go.... Very easy to clean up and just put it back in the box.

The only thing to get used to is it blows air constantly the trigger only releases the paint. Also the hose can pop off if you pull it to hard. I made the mistake of doing a couple of times mainly because I was too lazy to move the blower unit. At first this freaks you out because you think you just made a huge mess but you quickly realize the paint sprayer component shuts down the need and although you might get a burst of air in your face no pain goes anywhere and simply reattach the hose and keep going.

Highly recommended.

Steele Products SP-CE155QT 4.6 Gallon Aluminum Twin-Tank Quiet Air Compressor

• 4.6-gallong twin tank air compressor
• Powers air tools and handles inflation jobs
• Quiet operation at 55 dB
• 1.5 horsepower, 120 volts, 60 Hz
• 4.2 CFM at 90 PSI and 5.4 CFM at 40 PSI

I bought this because reviews said it was very quiet. It performed to my highest expectations for two weeks (why I say 5 stars). Then it sprung a leak at the gauge connection and therefore will no longer retain air in tanks. I am returning today for a replacement of same item as I want to give it one more try. Amazon return seems to be painless and they are sending UPS tomorrow to pick up. Luckily I kept the box and stuck it in my attic or I would be up the creek with an silver colored aluminum anchor!! Can you say premonition?

UPDATE: UPS picked up first compressor as approved by Amazon. Second compressor arrived with a box looking like it was shipped through a war zone. No strapping tape and the bottom fell off when I picked up the box. Ran unit for 15 minutes with tank valve open to break in as specified. Then when I tried to fill tank it was quiet until twenty-five psi and then a terrible rattling inside the compressor started and remains. Probably a knock in the connecting rod. Bad unit or bad drop, who knows. Back to Amazon tomorrow. Good thing I'm retired or I wouldn't have time for all this nonsense. Down to three stars....I know I said one more time, BUT I'm hoping third time is the charm or it will be plan B: Makita.

12/8/2011. Well, I am happy with the third Steele compressor. Quiet, no leaks. It has been two 1/2 months and no more complaints. Back up to 5 stars.

Buy Steele Products SP-CE155QT 4.6 Gallon Aluminum Twin-Tank Quiet Air Compressor Now

I spent weeks reviewing the specs on every small air compressor I could find in-store, online and have-in-mind, before I bought this one. Weight, noise level, quality and CFM output were the comparisons. The CFMs actually listed on it are 5.2 at 40PSI and 4.2 at 90PSI. It has 55dB noise level which makes it the quietest compressor available. There's a huge difference between 55dB and 60dB because it's a logarithmic scale not linear. My concerns about not having wheels were removed because it weighs less than 50 lbs., compare that to 38 lbs for my retractable hose with reel. It arrives with only one part (air filter) to attach. This compressor is small, quiet and delivers enough CFMs to power professional pneumatic tools. It has a 1-year warranty which is the same as others. It's energy efficient using a 1.5hp. Right now, noise is a huge factor and our baby really is not awakened. In fact, no one complains when I power this up except they wish they had one too spoken in a normal speaking voice.

CON: The manual is terrible. 7 pages of generic information about hazards, risks, and instructions on how to operate all air compressors safely. One page of specific operating instructions. Two pages of diagrams for parts. However, the components mentioned in the operating instructions are not shown anywhere. There are a few mis-spellings/grammar errors but that's a very minor issue.

Buy it!

Read Best Reviews of Steele Products SP-CE155QT 4.6 Gallon Aluminum Twin-Tank Quiet Air Compressor Here

This compressor is every bit as quiet as they claim it is. It is no louder than 2 people having a conversation.

A couple of reviewers complained about the quality, but mine has been great so far, and was nicely packaged when it arrived.

Want Steele Products SP-CE155QT 4.6 Gallon Aluminum Twin-Tank Quiet Air Compressor Discount?

super quiet which is why i bought it. Not the highest CFM but that is not what i was looking for. ~I use this to fill bicycle tires in my shop and run small air tools. This is way quieter than the Makita Mac2400 with the same reservoir size. The makita has higher cfm.

Save 6% Off

Yes, the motor is a lot quieter than other ones, the problem is that there is also a high pitched whine (whistle) that is so loud that you can't even hear the compressor motor working after a few feet away. Not really what I was looking for in a so-called 'quiet' compressor. Buy the other one that's available.

Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor

• Hobart AirForce 250ci lightweight plasma cutter with air compressor, powered by standard household current
• Designed to cut up to 1/4-inch mild steel; uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals
• Use it for a more precise cut, thinner kerf, and less slag to clean up with faster cuts than oxy fuel
• Includes 16.5-foot heavy duty work clamp, 7 -foot power cord with 115 VAC plug, extra replacement tips, and a convenient cable management strap
• 10-by-7-1/2-by-13-inches at 27-pounds; backed by Hobart limited warranty

Perfect little machine for the home hobbiest. I bought this machine for sheet metal work and the ocassional 1/4" chunk. Cuts like butter through thin steel, takes a little more time on the 1/4" stuff. But its alot cheaper to operate on sheet metal and mild steel than oxy-acetylene. Best feature of this unit is not having to adjust a single thing, no air pressure, no amperage adjustment. Just pull the trigger and cut away.

Buy Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor Now

I bought this Plasma cutter for cutting sheet metal and various Rusty parts off my 76 Trans Am and I must say for the size of this little box and the cost, I'm very impressed. The unit is like they say plug in and play. I found it very easy to fit into my Hobart upright cart along with my Hobart Handler 140 (also an awesome welder) so if you're concerned about size, don't be, it's about the size of 2 six packs. Key features I like about it are that I don't need to use my air compressor on it, it has one built in. This way I don't have to adjust the regulator or any. Also, it only throws sparks about 1-2ft, I've heard horror stories of Plasma cutters throwing sparks for 4-6ft. I'm working in a small one car garage and I don't like having to worry about fires and such when working. Now as for cutting depth. The book states it can do 1/4in thick steel. I believe if you have perfect conditions it can do this with a pass or two. I have found in my own experience that it will at least cut 1/8th to 3/16th. (I had to cut off my rear frame off my car and it worked great.) And as for 20-22gauge steel, it'll cut through that like butter.

Now the cons, he ground cable isn't very flexible. It seems almost as if it were solid wire instead of stranded. I'm comparing this to my welder's ground cable and it is much more flexible. Another con is that I'm not very good at it so it keeps turning on and off and when it turns off you have to wait for the compressor to refill (3-5sec) before you can start again. Not a huge con but annoying if impatience is a character trait. It does however run rather quiet, I can talk over the sound of the compressor. Other than that I can't really thing of other draw backs. They do come with a 3 year warranty from Hobart, I called hobart up and I talked to one of their repair technitions and he said he barely ever gets plasma cutters in, they mostly get welders that have been on the job site for 10-15 years. So I do agree that hobart is an AWESOME BRAND. So I my point with that is don't be afraid to purchase one used for a couple bucks less. It's worth it! I guess that about wraps it up.

Final Notes: I would recommend this to a friend for medium to light duty cutting. I would not recommend this to a daily use shop. I would suggest a size a bigger than this.

Biggest Con: Ground Cable flexibility

Biggest Pro: Aircompressor built in and uses 115v 20amp circuit.

Read Best Reviews of Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor Here

What truly sucks about this is that I waited too long to get it. All of the money spent on cut-off wheels, all of the time wasted at the grinding wheel fine tuning the parts... Bottom line; it will save you time, money, and provide you with that warm and fuzzy feeling we all strive for.

The good:

Built-in compressor. Turn on and go.

Small, lightweight, easy to move around.

Looooong hoses.

Mine doesn't have the stiff ground cable somebody else complained about. Don't know if this is a recent change.

Fairly good resale value.

The bad:

Make no mistake, this is a home unit. It will cut 1/4" steel, eventually... If you only cut thick pieces occasionally it will work fine. Clean cuts at 1/8" but still fairly slow.

Dinky guide, basically a folded thick wire. You will get good at using it but it will take time and in the process you will ruin some metal. If it had a better guide it would cut down the learning curve significantly.

Cool off period is annoying at first (you hit the trigger by mistake; you have to wait for the gun to finish blowing cool-off air before you can use it again). You get used to it.

Tips:

You may not be able to run it on a cheap extension cord. Mine kept going off. Plugging it straight into the wall fixed that.

Keep the opening end of the dinky guide pointing down (same direction as the hoses) and cut in a pulling motion, keeping the gun parallel with the cut. At first you think in some cuts it would be easier to flip the guide sideways and cut left-to-right. This inserts a new variable that makes accuracy much harder.

-Learn to relax your grip. two-handed, light touch will help you get better at it faster. Practice this with the gun off.

Want Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor Discount?

Bought refurbished model from Toolking and am very happy. Arrived promptly in like new shape. Cuts very well on smaller stock like 1/8 inch. Lag time for tip cooling after cut but very functional for the price and what I use it for. Would buy again or recomend for fellow hobby builder.

Save 27% Off

I was greatly disapointed with this. I had difficulty cutting even 14 gauge steel. I had to go extreemly slow, and got a very sloppy cut, because the power was so slow. It came with a extreemly cheap tip guide, made of a piece of bended wire. This kept rotating as it passed along my straight edge, causing further frustration. I guess you just expect more.

I wouldn't recommend buying this to any person, for any application.

Wolo Model 400 Airmite 2 Horn air horn kit - 12 Volt

• Two (2) durable red plastic trumpets
• Air powered and very loud
• New compact chrome plated compressor which is maintenance free
• Longest Trumpet is 8-1/2 inches
• Kit includes relay, hose and mounting hardware

Well you get what you pay for and paying only bucks for an air horn was not a lot. This horn is not what I expected. Lately it appears there a lot of drivers on the road that must have gotten their licenses on line somewhere or via mail order. People are driving 20 mph "below" the posted speed limits. I want a horn that when I hit the switch the reason I hit the switch gets out of my way ... with no hesitation! This thing sounds weak. My wife said it sounds like a sissy horn? I'm putting together the details of an air train horn hook up. I'm looking at spending 200+ so it better be 10 times louder. I did have a small problem with the way I was hooking it up and telephoned Wolo. After only a couple of minutes I actually "spoke" to a gut that really helped me.

Buy Wolo Model 400 Airmite 2 Horn air horn kit - 12 Volt Now

LOUD! I am tired of morons that know they cannot mulitask, but still insist on talking or texting on their cell phone while driving, especially in TRAFFIC!!! MORONS!! Anyway, when you are your cell phone and you about shit your pants because you hear this, than you need to stop what you are doing and pay attention at your primary objective; driving a car! This is perfect loud, not to extreme and not too quiet like oem horns. This gets peoples attention and thats all i need it for. I don't abuse it, but i sure use it a lot. I have been through a few vehicles, only because of moron drivers not paying attention to what they are driving, like an automobile and crahsing into my car causing it to either be no driveable or insurance, my own insurance comapny screwing me over on the value of the vehicle. Now, with that said, these horns straighten drivers out to pay attention. Install it just right and it will work. Keep in mind 20 amp fuse. You can use the same horn configuration, just need to change the fuse from a 10a to a 20a and it will work.

Read Best Reviews of Wolo Model 400 Airmite 2 Horn air horn kit - 12 Volt Here

Great horn for my little car. Now the big lifted F350s will hear me when they try to merge into me

Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose

• Economical 50-foot air hose
• 0 to 130-degree (F) working temperature
• PVC construction provides lightweight handling and heavy-duty durability
• Includes male 1/4-inch NPT fittings on both ends
• 3/8-inch by 50 feet long; weighs 4.1 pounds shipped

This vinyl hose definitely serves its purpose and I am pleased wit it. It is less than half the price of a rubber hose. Since I only use the hose occasionally I felt I did not need a better one. This hose is durable but could be a little more pliable. If you use the hose a lot (like every day) it may be better for you to purchase a rubber hose.

Buy Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose Now

Seems like a quality air hose for the money. I have used it for a couple of weeks on a construction site and has held up well.

Read Best Reviews of Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose Here

For the price the Campbell Hausfield 50Ft x 3/8 air hose is fair deal. I bought this hose because I needed some additonal reach to make it easier to use my air nailer for inside trim work. It seems durable enough, but because it is PVC it is very stiff when cold and holds the coiled shape making it unwieldy. If you want flexibility and ease of use opt for rubber hose.

Want Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose Discount?

Economical hose with necessary attachments. Seems rugged enough for any home handyman's uses!

Save 16% Off

I am sure this one would work fine, but needed one that was more flexible.