Showing posts with label high pressure air compressor paintball. Show all posts
Showing posts with label high pressure air compressor paintball. Show all posts

Sunday, August 31, 2014

10020 Ultra Quiet & Oil-Free 2.0 Hp 10.0 Steel Tank Air Compressor

10020 Ultra Quiet & Oil-Free 2.0 Hp 10.0 Steel Tank Air CompressorThis compressor is impressive, fills up fast, has good recovery, and is very very quiet! My only negative comment would be on the size of the tank. I new it was only a 10 gallon tank when I purchased, but this is because they don't offer a bigger one. Ideally a 25 or 30 gallon tank and this would be perfect for my use.

My son-in-law loved this item. He had it on his wish list and is very happy with it.

Thank you.

Buy 10020 Ultra Quiet & Oil-Free 2.0 Hp 10.0 Steel Tank Air Compressor Now

I purchased this compressor to supply a spray gun in my wood shop. It not only has plenty of air for a LVLP gun but it is the quietest air compressor I have ever owned (by far).

Read Best Reviews of 10020 Ultra Quiet & Oil-Free 2.0 Hp 10.0 Steel Tank Air Compressor Here

Thursday, July 31, 2014

Hitachi 728582 1/2-Inch by 3/8-Inch Square Female Male Adaptor with Friction Ball

Hitachi 728582 1/2-Inch by 3/8-Inch Square Female Male Adaptor with Friction Ball
  • Well-built with a high quality design
  • Overall drilling length of 1-1/2-Inch
  • 3/8-Inch square male adaptor comes with a friction ball
  • From 1/2-Inch socket drive to 3/8-Inch socket drive
  • Comes with a 30-day limited warranty
  • Adapts sockets from a 1/2-inch square female end to a 3/8-inch square male end
  • Allows up to 20-percent more torque
  • Made using high quality alloy steel (chrome-molybdenum)
  • Measures 1-1/2-inches long

Just kidding. It works though. What else can I really say? Yes, now I can use my 3/8 sockets with my 1/2" ratchets and bars. If that's what you need to do too.... then this is your man.

Save 28% Off

Sunday, July 13, 2014

Short Air Compressor Hose: 1/4" Male NPT to 1/4" Male NPT Connections

Short Air Compressor Hose: 1/4' Male NPT to 1/4' Male NPT Connections
  • Approximately 7 inches long only
  • Pressure rating: 250 psi with 4:1 safety factor.
  • 100% outdoor rated, virtually indestructible, impervious to water and oil
  • All metal parts are brass. Hose is Goodyear Insta-Grip, 3/8" inner diameter.
  • Made in USA. We ship from Andover, Kansas, USA.ALL ORDERS BY USPS WITHIN 24 HOURS.

I couldn't believe the only short air hose I could find was only six inches long. It's almost too short to be useable, but it was the least bad that I could find. I think the next longest "short" air hose commercially available is ten FEET long. Twelve inches would be practical. Six inches can barely be curved into a 90 degree bend. Nothing wrong with the hose--just a lot wrong with the "short-hose inventors."

Tuesday, June 3, 2014

Merrill Mfg. PG200 Steel Pressure Gauge

Merrill Mfg. PG200 Steel Pressure Gauge
  • 200 PSI
  • 2" Steel Case
  • 1/4" NPT Male thread (brass)

I used this to adjust the pressure on a Gaggia Classic espresso machine. It's a very simple process: remove the spout from the portafilter, attached the pressure gauge using a 3/8 to 1/4 adapter (also available on Amazon: Lead Free Brass Pipe Fitting, Reducing Coupling, Class 125, 3/8" X 1/4" NPT Female and see what the pressure is. The factory setting on mine was 160 psi (which is about 11 bar). I initially adjusted the pressure to 145 psi (which is about 10 bar), and may go a bit lower after further testing.

There is a marked difference in the espresso quality with proper pressure, and this is an inexpensive way to determine the pressure setting of your machine.

The gauge itself is decent -about what you would expect at this price point. But, it gets the job done and is very inexpensive!

Buy Merrill Mfg. PG200 Steel Pressure Gauge Now

This appears to be a good, steel air pressure gauge. It arrived within a few days of ordering it. After the application of a little teflon pipe tape, the gauge was screwed into an air pressure regulator. The regulator was adjusted to where the gauge showed 90 psi. Without any way to check the accuracy of the gauge, one can only presume that it is accurate. The gauge did not leak and appears to be of good quality. I have no complaints against it at the present time.

Read Best Reviews of Merrill Mfg. PG200 Steel Pressure Gauge Here

I ordered this gauge to replace a broken gauge on a small Craftsman compressor. It went on without a problem and it works just fine. Bottom line...it is relatively inexpensive and it does what it is supposed to. I would buy another if the need arises.

Want Merrill Mfg. PG200 Steel Pressure Gauge Discount?

these gauges are much better than the ones i replaced them with, very good quality for the price

good gauges can save a lot of work from having to be done a second time (think automotive paint?!?)

Save 69% Off

Got delivered quick and did the job to check my static shower pressure... Would buy it again!

Wednesday, May 7, 2014

Motion Pro 08-0126 4-Stroke Leak Down Tester

Motion Pro 08-0126 4-Stroke Leak Down Tester
  • Designed to check the amount of cylinder leakage in a 4 stroke engine
  • Speeds up trouble shooting and helps to isolate bad components
  • Gauge will register the total percentage of leakage past the rings, head gasket, intake and exhaust valves
  • 10, 12, and 14 millimeter spark plug thread hoses, regulator and gauge included
  • Made with high quality regulator and gauge; these cost more, but you get a better tool

Being a motorcycle technician, I need tools that are going to work no matter what and the motion pro leak down tester is essential for any small engine mechanic.

Save 31% Off

Thursday, March 27, 2014

MicronBlaster MB10 Micro Sandblasting Unit

MicronBlaster MB10 Micro Sandblasting Unit
  • Dual chamber micro sandblasting unit with built in water trap and air regulator
  • Can easily be wall mounted or will stand securely on a table with included brackets.
  • Polish, etch, clean, restore, or deburr any surface, such as metal, glass, ceramic, wood, and stone
  • Dual transparent chambers allow instant switching between media grades
  • Includes 3 long-lasting 50-micron ceramic tips, a 3-foot air hose, and a compressor quick connector

I borrowed this unit from a friend to etch some glass for an architectural project at home. I'd never done anything like that before but was pleased that it did an excellent (and fast) job. I used clear contact paper that I got at Ace hardware for the mask template. You can remove the cut-outs either before or after you adhere the contact paper to the glass, but for more complex designs like ours you really have to apply the contact paper first and then cut the "to be etched" parts out with an Exacto knife. It does generate a fine dust during use so you need to use it in a garage or outdoors with a simple doctors type face mask. The project turned out quite professional looking and our friends are amazed. A great little unit!

Buy MicronBlaster MB10 Micro Sandblasting Unit Now

We use one of these machines to prepare fossils in our paleontology laboratory. The dual chambers are very convenient because we start our preparation with a more aggressive 120 grit aluminum oxide blast media to eat away the surrounding rock and then switch (at the push of a button) to the other chamber / wand containing softer dolomite (or 400 grit aluminum oxide) for more gentle close-in work on the bones themselves. Make sure you use a mask and goggles if you'll be working for sustained periods because it does kick up dust. Our compressor is very quiet but for absolute silence you can run one of these units for hours on just compressed air from a tank that you can fill up at the local gas station.

Saturday, February 8, 2014

Frigidaire FRA093PT1 9,000 BTU Portable Air Conditioner with Remote Control

Frigidaire FRA093PT1 9,000 BTU Portable Air Conditioner with Remote Control
  • 9,000 BTU cooling capacity
  • Cools room sizes up to 425 sq. ft.
  • Swing air direction control
  • Anti-bacterial mesh filter type, rear filter access
  • Electronic controls

We purchased the Frigidaire FRA083PT1, because loading our large air conditioner

into the window was becoming too difficult. We've been quite pleased with it.

It is 90 deg out and a cool 77 deg inside cooling 600 sq ft. We keep the other

rooms closed off. I've also had the door of my office open for a while and it quickly cooled that space as well. The only thing I don't like is its large size and the fact that

the window attachment piece was too large for the 23" wide window we wanted to put it in and had

to cut the plastic piece down to fit.

Buy Frigidaire FRA093PT1 9,000 BTU Portable Air Conditioner with Remote Control Now

Overall, this was a great purchase. The unit is not that large, about the size of a large kitchen garbage can, and cooled a 10x10 foot room from 85 degrees to 77 in an hour. It is definitely much quieter than any window unit I've used. Once it gets to your set temperature, it maintains it with a minimum of noise.

The biggest negative is the space needed behind the unit to run the exhaust duct to the window. For some reason, the output is at the bottom so you have to give enough room for the duct to double back and that requires about another foot of space between the window and the AC itself.

Although it's heavy, the casters make it easy to move if needed. Installation was quite easy, with very little assembly required.

Lots of great features, including fan only, heat, and dehumidify, and the remote is handy and easy to use.

I was skeptical about buying my first portable AC but am about to order a second one to replace our living room window unit.

Read Best Reviews of Frigidaire FRA093PT1 9,000 BTU Portable Air Conditioner with Remote Control Here

I've had the item for less than two weeks. As I live in an area that needs dehumidifiers more often than A/C, I wanted a combo unit that was easy to pull out and put to work for especially hot, humid weeks and visitors, to supplement my basement dehumidifier. Knowing portable A/C units require frequent pan changes or drain hoses, I bought this item based on limited local availability of portable 9000BTU units. Out of the box, it worked fine. I was badly annoyed to find out that the hose drain plug is cheap, poorly made/leaky plastic, and, despite being located half way up the unit (about knee high), the entire unit had to be elevated 18" to keep the hose "below the unit", and level, per the instructions. Awkward and unsightly as this setup was in my dining room, it worked effectively, both dehydrating and cooling well. Not needing it for the rest of the week, I packed up the attachments, detached and coiled the hose, and pushed them all against the wall. The next time I set the system up, the hose leaked at the hose connection (flooding the floor) and was VERY easily overtightened, popping almost entirely out of the hose and leaking badly. After checking the hose seal & threads, I wiggled and shifted the hose and tightened it to the "sweet spot" where it was neither overtightened or leaky, I taped the hose to the wall to keep it from shifting to maintain the seal. Finally, it did not leak, but now, it would only drain from the pan in the bottom, and would stop every hour to have the pan emptied, so I disconnected the hose, and took it out to drain and check it for clogs/kinks nothing, worked fine, all clear. Hooked it back up to similar effect. There is nothing in the manual about this problem, no answers online, despite many complaints from similar Frigidaire products, and customer service has nothing to offer beyond "take it back". At 80 pounds dry, more now that it's wet, my answer was "really???" I paid twice as much as I did for my last unit, which was 1 size smaller and had similar qualities.

The exhaust hose was also a nightmare. I had to tightly safety-wire the hose cap to the window fixture to keep it from backing out, and the rigidity of the hose kept forcing the window bracket out of alignment in the window, even over shifts as small as a centimeter. Also note: the hose doesn't fit in the storage spot with the caps on, so you have to screw& unscrew the caps every time you use it.

By the time I was done, the elegant design on the box was lost in extensive jerry-rigging. There are a lot of crappy models out there, so as an educated consumer, I'm used to being disappointed and making due but this is ridiculous. I wasted 8 hours of my life troubleshooting this. It's not worth the effort. Buy another brand or just save your money for something worthy.

Want Frigidaire FRA093PT1 9,000 BTU Portable Air Conditioner with Remote Control Discount?

The Frigidaire FRA093PT1 runs very quite and the wheels make it very easy to move from room to room. When the compressor starts up, there is a little noise as to be expected. As long as the unit is on a level surface there is not to much noise. Shipping was a promised and it arrived in good shape and on time.

Save 32% Off

Just got this unit one day ago. Generally, when you have it set up, it works great: strong cooling power, nice appearance. It will keep your room comfort enough as you expected. Also, the included window kit will make it convenient to put the hose on your sliding window.

However, there are a few things to be noticed. First, you need to be extremely careful when installing the unit. You MUST make sure that the hose doesn't have a lot bends. As far as I have tried, the only way I made it work was to keep the hose almost straight. Otherwise, the compressor will stop working after like 2 minutes due to overheat, and won't start again until the temperature drops, even if you restart it.

Second, the noise is big. It might be less a problem if you put it in a big living room with enough distance between it and people, but if not, you'd better think about if you are ok with noise. The noise is like, if you listen to music on your windows computer with volume set to around 15, you won't be able to enjoy your music smoothly.

Third, it's very heavy, so if you need to work on it to keep the hose straight, make sure you have tools and enough people.

Hope this will help someone buying it, especially if you find its compressor not working and you have a bent hose.

Saturday, December 7, 2013

Porter-Cable PN650 Palm Nailer Kit

Porter-Cable PN650 Palm Nailer Kit
  • Capacity from 1-1/4-inch to 6-1/2-inch (3d to 70d)
  • Comes with four different nose tips
  • No Mar finish tip: for finish nail up to 3d
  • Magnetic tip: for driving 3d to 16d common nails
  • Standard tip: for common nails up to 70d;Steel hammer kit: for moldings, dowels, automotive body work

Since nails must be inserted one at a time, this is not the best tool for someone with thousands of a specific type of nail to drive. However, it will serve in place of an array of nail guns for those who must drive a variety of different nails. In addition, it is safer since the nails are driven by successive blows rather than shot out of a gun.

Small finishing nails go in straight and can be driven flush with the wood surface. Countersinking is not possible since the driving blade is too big and leaves a mark, but it is a simple matter to countersink them by hand. The point of each nail is placed exactly where it is supposed to go, so accuracy is very good.

The biggest nails in my shop are serrated barn nails about 8" long, and this tool drove them through a 6x6 treated beam like shoving a knitting needle through styrofoam.

The hammer tip is good for pounding anything you would normally hit with a hammer. It drives wood through my doweling plate fast and I will probably find alot of other things to bash with it.

My compressor is small and fairly old, but this tool doesn't need much air to run. Also, the case is well designed and holds all of the considerable accessory parts firmly in place when not in use.

Buy Porter-Cable PN650 Palm Nailer Kit Now

I have always used a framing hammer to nail joist hangers and usually on every job I bang my finger once or twice while trying to hold the hanger/nail and hammer. I used this tool for the first time today and was amazed at how smooth it is. It comes with quite a few different accessories for different types of nails and it comes with an air hose connection. I had to nail one hanger with only 5 1/2" between the hanger and the adjacent wall and the palm nailer handled this easily. I was expecting this tool to be rough on the hands but was surprised at it's smoothness and tons of power. This is a tool I wish I had bought years ago.

Read Best Reviews of Porter-Cable PN650 Palm Nailer Kit Here

I am in the midst of building a deck. I and my partner have used this palm nailer from day one of construction. It is easy to use, very controllable.

Without this palm nailer I would have blown my elbow out with a conventional hammer and nails. Each joist hanger took 6 nails

Two hangers per joist=12 nails. 28 joists x 12= 536 + nails in hangers and all went in straight and without hesitation.

To date, this is the best purchase I have made that saves wear and tear on my elbow.

I recommended this for anyone who needs to drive an enormous amount of nails, especially through joist hangers where aim is critical through pre made holes..

V.M.Steel, NY

Want Porter-Cable PN650 Palm Nailer Kit Discount?

I formerly had a Danair palm nailer and a Senco. The Senco had a leaky gasket that I had to tighten the bejeezus out of and it still leaked a little air. The Senco also came without any accessories. The Danair had a problem with the tip always coming loose. The padded leather grip was the nicest on the Danair. The Senco came bare metal. Without the leather grip it becomes very uncomfortable to use.

I use a Porter Cable now. I like that for the price it comes with several tips for different size nails. The leather grip is also standard. I have been using the Porter Cable for about two years now without a problem. I used it to nail 20d HD galvie commons . Using a hammer for such a large nail would likely leave a mark if you missed and all the heavy pounding would have been pretty tiring. I use the palm nailer for nailing tile backer, joist hangers, nailing in tight spots and for spikes. Changing tips is easy with the wrench supplied.

I only rated it four stars because the magnetic tip lost it's magnetism early on so now I have to hold every nail to start it. This palm nailer is the best value out there. It has held up to lots of abuse so far.

Save 49% Off

My wife and I recently purchased the Victorian house of her dreams and my nightmares. The goal is to restore the house within 2 years of purchase. We are 16 months into the effort. In bad weather I work inside and when nice outside. The Porter-Cable palm nailer could be the perfect tool for me to drive roofing nails, siding nails, three sizes of finish nails, 16d sinkers, and galvanized twist nails (3 ½ to 2 inches long) along with assorted pounding tasks. The pounding tasks include chiseling wood, electric wire staples, and a copper kettle from a flat copper sheet. That's my situation.

I purchased the tool and immediately put it through a series of tests including air demand. I have a 1.5 horsepower, 3-gallon tank, $99.95 el cheapo air compressor from Walmart. My biggest concern was how it would sink finish nails because none of the reviews here covered them. My second concern was the complaints about the magnet holding the nail before you start driving it. I wasn't born with a third arm and it would be nice if I didn't have to hold the nail to get it started while trying to hold the work too. Lastly, the Victorian we are restoring was a church parsonage so when missing nails or hitting my fingers with a hammer I've really had to watch my language. In this preventive function, the nailer could have great redeeming value.

My results and comments in item format:

1. I drove 4 sizes of finish nails at various angles and straight in. No problems.

2. I drove (10) 3 ½" nails as fast as I could and the compressor kept up without a problem.

3. Other reviews expressed disappointment with the magnet holding the nails. I only had problems holding 3 ½" galvanized sinkers. I was very relieved when it did a good job of holding finish nails, siding nails, and roofing nails. Magnets do not like impact and weaken over time. When I'm done with it for the day, I'm going to stick another magnet to it to charge it, so to speak.

4. Hardi-Plank is a 100 year guaranteed concrete impregnated fiberboard replacement siding. I have several hundred square feet to put up when the weather breaks. The nailer drove a siding nail through it like butter.

5. I used the hammerhead to pound in several electric wire staples. The locations of those things never give you a clear hammer blow. The nailer put them down just fine except I'll have to make sure it does not push down too hard against the wire.

6. Using the hammerhead attachment to bend flat metal will be wonderful. I will be making a large copper bowl for a deck fire pit from a flat sheet of copper.

7. I found the unit to be of quality construction and worthy of the asking price. I'm glad I purchased it.

Disappointments:

1. I read where the distance you want the nailer to drive a finish nail is adjustable. I don't think it is. There was nothing in the manual about it nor could I figure out how to do it without modifying the tool.

2. A sleeve is shown and provided to place over the nailing ram for the hammerhead attachment. However, once in position the hammerhead could not be assembled even when the ram was in its fully extended position as required in the manual. I assembled the hammer without it and it worked fine.

3. The small dimple left by the finish nail driver is a bit larger than I would like. However, it is much smaller than the marring I leave behind every time I miss the nail.

Recommendations:

1. I can recommend this tool to people who have a need to do a lot of nailing once in awhile. I'll use it intensely for the next year and then only every once in awhile.

2. I can recommend this to people with wrist or arm injuries that find it painful to swing a hammer.

3. I can recommend this tool to people who hit their fingers as many times as they hit the nail.

Wednesday, November 6, 2013

Porter-Cable PAS1 Air Compressor Oil

Porter-Cable PAS1 Air Compressor Oil
  • Prolongs compressor life of single and two stage compressors
  • 32 oz container provides a complete refill for a single stage pump
  • Tapered spout for easy application of oil

Yup.

It's replacement oil for my air compressor.

Does its job. No complaints.

Cheap and shipped direct to me means no time wasted at a store hunting in aisles.

Buy Porter-Cable PAS1 Air Compressor Oil Now

This product was received timely. Really appreciate the effectiveness of the long neck bottle and as always, the quality of Porter Cable.