INT-360060 Intercomp Air Gauge, 60 x 1 psi - 4"" Glow-in-the-Dark Dial"

My husband sort of makes fun of how large this gauge is, but at the same time it's super easy to use, it glows in the dark, and it's the one he grabs to use.

I have owned and used Intercomp products for 15 years. I have owned this particular gauge for 3 years. I use it to set pressure on motorcycle racing slicks. It is accurate, easy to read, and the fitting swivels making it easy to access valve stems in the center of a motorcycle wheel. It has a check valve so it will hold the pressure until you release it. I didn't really think much about the glow-in-the-dark feature but it has come in handy early in the morning when the sun isn't up yet. Shine a flash light on the face for a 5-10 seconds an it will glow nicely while checking pressures. The silicone boot around the gauge does a great job of protecting it. Be sure and write your name on it. They have a habit of running away:)

Buy INT-360060 Intercomp Air Gauge, 60 x 1 psi - 4"" Glow-in-the-Dark Dial" Now

I've used it for 1 month and it is very easy to use and gives a simple reading. x x x

Read Best Reviews of INT-360060 Intercomp Air Gauge, 60 x 1 psi - 4"" Glow-in-the-Dark Dial" Here

Stanley Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing

• 2- to 3-1/2-inch clipped head stick framing nailer
• Driving power: 1050-inch-pounds; pushbutton depth of drive
• Magnesium housing for durability; weighs 7.6-pounds
• Sets up as sequential- or bump-fire trigger
• Length: 20-inches; 7-year manufacturer warranty

being a pro framer, i have used many brands of nailers. hitachis are my favorite, but if you don't have the cash for them, this gun is a close second. lots of power. will nail into engineered wood. the teeth are nice and sharp making toe-nails a breeze. you won't have to pull out your hammer to finish off any toe-nails with this gun. little things about this gun are nice too. like the air exhaust can be moved in any direction without tools and comes with a rafter hook preventing some nasty falls off joists or trusses. good framing gun, not the best, but a good framing gun none the less. worth buying.

just to add to my original review; after using my gun for a few months of constant use on the job site, i have had a few problems. the rafter hook broke pretty easily so now i have to be extra careful nailing joists and trusses. also, every now and then a bit of dirt or sand will get in the housing and just sprays air out of the exhaust. to fix it i have to take it apart and clean it. it's really annoying considering how much a framer counts on his nail gun. it's still a good gun, but i'm just gonna invest a bit more next time.

Buy Stanley Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing Now

I own 4 Bostitch nailers and they are all great. I like the light weight of the nailer as well as its more than adequate power. You just can't beat the ease of use for a pneumatic nail gun.

I did a lot of research before purchasing the Bostitch and I am very glad I did. It has yet to jam. The toe nailing claw is great. It really digs into the wood and allows you to drive nails at any angle without slipping.

Can't go wrong with this.

Read Best Reviews of Stanley Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing Here

This product is great and it makes framing a breeze. The only problem is that the wire clipped 28 degree nails are not commonly found in a lot of the public building supply stores (Home Depot, Lowes etc.) They can special order them for you but if you need them right away you are out of luck, with that being said once you do get the nails this is one fine nailing machine that will work all day without any problems.

If you want a trouble free framing nailer this is a very fine heavy duty one Bostitch F28WW Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer with Magnesium Housing

Want Stanley Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing Discount?

I have used almost every brand and type of framing nailer over the span of 20 years. this nailer is as close to perfection as i have seen. i was afraid it may have poor durability because of it's extreme light weight, but over the last 2 years, a million+ nails, and a few nasty falls it has crushed all my fears. I can't remember one jamb, sinks nails in lvl and other lam mat. better than any other gun i've used, and i think at this point it's takenthe durability prize. my only complaint would be the smart trigger acts goofy at times since day one. maybe by now bostitch has smartend up the goofy thing. i think i bought the first one they sold.

i noticed one reviewer said nails are hard to find for this gun, "special order" i think he said. maybe out west (WA?) where he is, but around here (PA) 28 wire is the standard. They are everywhere. i've even bought them at a back woods mom and pop hardware store.

Save 33% Off

I picked this up at HD, and after using the paslode cordless, I really like the Bostitch. For it being as light as it is, it really has tons of power, and holds way more nails than the paslode. Because of it's magnesium construction, it's also lighter than the paslode, and with a lightweight airhose, this thing is versitile. The countersink feature rocks due to it's pushbutton guage, and the cleat it has on the safety works brilliantly for toenailing.

For an airpowered gun, this thing rocks!

Coilhose Pneumatics BG-KITC 771 Pistol Blow Gun Kit, Includes Blow Gun, Various Tips, 1/4-Inch MPT I

• Durable and compact case stores easily
• Contents lock into place inside case to assure that they remain safe and secure when transported
• Blow Gun has 1/4" FPT inlet and 1/8" FPT outlet (tip)

UPDATEI took out my negative rating. Company is replacing defective nozzle. All is well and I changed rating. I only gave 4 stars because of having to get it replaced, but I like these nozzles overall.

Save 21% Off

Amico 1 1/4" Black Inlet Filter Silencer for Air Compressor

• Product Name : Compressor Muffler;Use for : Air Compressor
• Material : Plastic;Color : Black
• Size (Approx. ) : 13.2 x 6.5cm / 5.1" x 2.5" (D*T);Thread Diameter : 3.25cm / 1 1/4"
• Weight : 219g
• Package Content : 1 x Compressor Muffler

This item description, while accurate, is misleading. The threads do in fact measure what is specified in the posting, but the threads are metric, or imperial or something, not SAE or standard American pipe thread. If you're in the USA, this will not fit a standardfemale pipe adapter, just want to share my experiences with everyone. It can be made to work with a PVC adapter if you cut most of the threads out with a utility knife and force, force, force the silencer in, but it ain't easy by any stretch. My advice is to stay away from this if you need standard American threads for your project. And my advice to Amazon is try to include a better description for your foreign sellers' articles.

DEWALT D55151 14 Amp 1.1-HP 4-Gallon Oiled Twin Hot Dog Compressor

• 3.2 CFM delivered at 100 PSI pump enables quick recovery
• Oil lubricated pump improves durability
• Cast iron cylinder enhances pump life
• Lightweight design for easy use and handling in a variety of orientations
• High-flow regulator for increased performance;Dual soft start valves assist in cold weather start-up

This is probably the best small compressor I have owned. It is very user friendly, relatively quiet and it comes up to full pressure rapidly. It also has the added durability feature of an oil reservoir to keep the piston well lubed.Previous small compressors I have owned were oiless types and were prone to freeze up under prolonged use.Not so with this model.

Buy DEWALT D55151 14 Amp 1.1-HP 4-Gallon Oiled Twin Hot Dog Compressor Now

I've had this DeWalt compressor for three years and have cussed it the last two years. It performs horribly when it's cold, takes a long time to fill with air and is fairly loud. I really didn't realize how much I hated it until I finally had enough and purchased a Makita MAC2400. It is twice the compressor, performs great when it's cold and is half as loud as the DeWalt. The Makita is a little heavier, but for only $20 more you get a much better compressor.

Read Best Reviews of DEWALT D55151 14 Amp 1.1-HP 4-Gallon Oiled Twin Hot Dog Compressor Here

I do various home repairs on my own home and I needed a good quality air compressor for my nail guns. A friend of mine recommended the oil fill type as apposed to the oil-free version because of the life expectancy of oil-free. I have had the compressor for about 6 months and it has performed very well. It's a little louder than I expected, but not that bad. I'm very pleased.

Want DEWALT D55151 14 Amp 1.1-HP 4-Gallon Oiled Twin Hot Dog Compressor Discount?

I'm sure the compressor will prove to be a great reliable workhorse, fired it up and it's not too loud, held the pressure. My problem has been receiving 3 damaged compressors. The plastic guard around the motor is always cracked and the mounting bolts have been jarred loose leading me to think that if bump that broke the plastic guard was big enough to jar the bolts what else is damaged? Dewalt, whats the problem with using a better packing method? Other companies seem to have it down, especially Bosch. Extra thick cardboard and a few pieces of styrofoam please!

Save 53% Off

As a trim subcontractor we use compressors every day and we have to have dependable equipment. I have had several brands of oil bath compressors. All have given years of daily service with minimal breakdowns. These Dewalt models have everything you need to power 2-3 finish guns at a time. With routine checking oil and air intake filter your set for work. I try to pull the oil pan off and clean the crankcase out once a year and refill with synthetic oil. By taking the pan off you can wipe out the aluminum dust that settles in the oil. It will not drain out with the oil if you just pull the plug. This is a heavy duty unit that will give you years of service! I do not recomend any oil free models they are very noisy and breakdown more often. You may save a few bucks with oil free models and if you get one buy some ear plugs and keep your savings for the replacement model when it dies?

GMC SYCLONE 3010 Ultra Quiet & Oil-Free Air Compressor

• Only 60 decibels
• Oil-Free
• Lightweight
• Portable

Let's start with the bad:

a) I was disappointed that a GMC machine would have alternate language translated into English labels. This to me means it was designed and manufactured NOT in the U.S.A. which is what I would expect from a company the US government just bailed out of bankruptcy.

Things like "Being sure allowance for opening of nothing water rusting evenly" gibberish. Ripped those off buu bye.

b) One of the legs had suffered an extreme impact. I had to use a large piece of steel and heavy hammer to bend the pipe back into round so I could put the rubber foot on. Better packaging with emphasis of protecting the bottom of the unit would have prevented this shipping damage.

c) The quick connect was the biggest piece of junk ever. Getting it to release is difficult. Getting it to hold the hose connector, difficult. Leaked A LOT unless the hose was perfectly aligned which isn't always easy with a hose filled with 90 lbs of pressure. Watching the hose self release after being attached for two days and fly across the floor and getting my ears blasted to bits with the concussion of the air rushing out of the hose was the last straw.

For $1.90 and a trip to the hardware store I replaced it with a high quality quick connect valve and tossed the GMC valve in the recycle bin. All I can say is this was a ridiculously cheap connector.

d) The release valve started leaking after I used it the first time. I took that off and found there was a small metal pellet, about the size of the head of a needle that had gotten in between the two surfaces of the valve. I cleaned it out by turning it on with the valve still removed and it blew a couple more little pellets out. After that I haven't had any problems with the release valve leaking.

Now for good stuff:

a) This is a very quiet machine. I can be in my 16 x 20 shop listening to the stereo at moderate level and this comes on and I can barely even hear it. By comparison air blasting the dust off my bench is probably three times as loud as the compressor!

b) This has one of the fastest recharge times of any compressor I've ever used, which is good because it's a small unit. And that's the main advantage of it. Small and Quiet.

c) It's good enough pressure and a quick enough recharge time for finish work and dusting, and being that I make guitar amps and cabs in a small shop, that's exactly what I needed.

I have a 20 gallon oil compressor for any bigger jobs. It's also quiet, but big as a cow and just about as heavy not the kind of thing you can use in a small shop like mine.

d) For a sort of ugly duckling appearance, the look kind of grows on you after a while.

e) It's easy to carry. As in I'm 5'6" and 55 years old with a back problem and I can just whisk it off the ground with zero pain.

Synopsis:

Overall I'm very happy with the performance of the unit, but a bit disappointed in the quality control, and the foreign language translation was just an extension of the lack of attention to small detail.

For the price I guess this is what you get. This is a fantastic deal if you're handy enough and willing to make an upgrade and repairs like I mentioned right out of the box. If not, *surely* you have a friend like me that will happily come over and help you and share a six pack. Hey, works for me!

Buy GMC SYCLONE 3010 Ultra Quiet & Oil-Free Air Compressor Now

I love this compressor. Quiet is the first thing you will notice or at least not notice. It's the lack of pounding sound that you will notice right away. You'll stand there for a second and wonder why you hadn't heard about this unit before? Then you'll try and remember what that old compressor sounded like banging in your ear. Shake yourself out of it and realize life is good now, you made a good choice.

I make a living as an artist, mostly an airbrush artist so I know about quiet compressors. This is not as quiet as my $800 AirForce unit but I would use this in my studio no problem. Instead I use in for all the utility work needed around the studio; nail guns, spray guns, impact wrenches, flat tires and any other item you can hook up and work with air in a shop. I don't know from experience if you could hook up a number of nail guns to this unit at once but I used it to run every air tool to build my studio addition including the Bosch framing nailer. Worked like a champ. It's also fairly light and can be carried around, within reason, without much strain. I keep it strapped to a small hand-truck just for added convenience. I'd recommend this compressor for a small shop like I have and maybe even for a small general contractor. For the price, it's a winner.

Read Best Reviews of GMC SYCLONE 3010 Ultra Quiet & Oil-Free Air Compressor Here

I did not encounter any of the small problems that Unit 1 had. I use this to blow out my underground sprinkler system. This is the third compressor I have owned for this purpose.

Advantages: small, portable, relatively high air volume output for its size, amazingly quiet.

Disadvantages: none.

Would buy again. Will update this site if/when it ever disappoints me.