Showing posts with label campbell hausfeld 60 gallon air compressor. Show all posts
Showing posts with label campbell hausfeld 60 gallon air compressor. Show all posts

Saturday, October 18, 2014

Anti Vibration Pad sheet 18" x 18" x 3/4" All Rubber Vibration isolation sheet

Anti Vibration Pad sheet 18' x 18' x 3/4' All Rubber Vibration isolation sheet
  • Anti Vibration pad All Rubber Super Duty sheet 18" x 18" x 3/4" 60 PSI max load
  • FREE SHIPPING
  • Applications are endless.... Air Compressors, HVAC, Stereo Equipment, Treadmills etc etc
  • designed for Indoor and Outdoor applications

This is a profesional and reliable insulator that you can counton to do the job exactly as described by the seller. No transfer of vibration. At last.

Excellent seller, perfect packing fast shipper.

John

Save 50% Off

Monday, August 4, 2014

GOODYEAR 46512 3/8-Inch by 10-Feet 250 PSI Lead-In Rubber Air Hose With 1/4-Inch MNPT Ends

GOODYEAR 46512 3/8-Inch by 10-Feet 250 PSI Lead-In Rubber Air Hose With 1/4-Inch MNPT Ends
  • Solid Brass End Fittings: 1/4-Inch MNPT
  • Spiral Synthetic Yarn Reinforcement
  • Abrasion-Resistant Rubber Outer Jacket
  • 100% Made and Assembled in the USA
  • Hose ends are male / male

This is just what I needed to have a detachable connection between my air tank and my permanent RapidAir lines. Now I can disconnect the short hose and move the compressor if I have to. The rubber hose and fittings seem to be of good quality, made by Goodyear in the U.S.A. The hose is very flexible, bending without kinking.

Buy GOODYEAR 46512 3/8-Inch by 10-Feet 250 PSI Lead-In Rubber Air Hose With 1/4-Inch MNPT Ends Now

This Goodyear hose is designed for connecting peripheral equipment such as hose reels to hard lines down line from the compressor. It is rubber and it's lifespan of years in operation will be greatly reduced if not used properly. This is a great hose and one of the best when used properly.

Connecting it directly to a compressor without a filter will allow oil and other sludge buildup to quickly occur in it which will soon begin to destroy it from the inside out, eventually causing a blister to form and rupture usually near one of its end fittings. Air compressors expel contaminates such as oil, moisture, and others from the air, that will destroy any rubber hose over time sometimes in only a short period of time. This is why a coalescing type filter should be used before any rubber air line. On smaller consumer grade compressors (even contractor grade portable compressors), it doesn't take a very large or expensive filter to greatly increase the life of connected rubber hoses and a filter will help prevent contaminates such as water and compressor sludge from entering and damaging air tools. Prevention steps of these buildups should also be taken by draining the compressor tank and the filter frequently which will also greatly increase the life of the air tank and the filter.

An air cutoff valve and added pressure regulator should also be in the line before any rubber hose. The reason for this is all rubber hoses should be depressurized when not in use, and all air lines should be re-pressurized slowly. The added regulator also keep the line pressure steady and allows for setting the correct pressure for the tools being used. Following this procedure will make all air lines and tools last many years even decades! Using this inexpensive Goodyear hose properly can also aid in preventing a failure that could drastically reduce the life of the components of your air compressor and never leave an air compressor turned on when not in use.

What should you use to connect a stationary (or portable for a stationary use) air receiver (compressor) to stationary lines or piping? The answer is a flexible braided stainless wire hose designed for this. They cost more, but they cost less over a period of years in comparison of their lifespan to having not used a hose where and how it was designed to be used. Here's an Amazon link to one similar in size to this Goodyear hose New Flexible Metal Hose Connector 1/2" x 18" length air compressor stainless steel braided.

What prompted me to review this product were the user reviews and submitted photos in the photo gallery. Most notably, was one of a large vertical compressor using this Goodyear hose improperly a sure path to destructive failure with no filter present to protect the hose, regulator, or any tool and line, connected after that regulator. I like equipment to last as long as possible, and using it properly is how you can keep it looking good and in service as long as possible. I have a smaller two stage 3 horsepower compressor I recently replaced the air receiver to after over 30 years of use. The whole unit still looked new after all the years of use, and the compressor runs like new after replacing the old original non-ASME tank that had begun to leak. I have since moved that compressor to the garage on my home, and installed a new 7.5 HP Emax in the garage behind my home. Proper use means less upkeep and less expense over time.

The Goodyear "yellow" 300 PSI hoses are all great products, just use them correctly and they will prove their superiority to you over any test of time. This 1/2" hose comes with well made 1/2" male NPT brass ends and can, and will last well beyond the Goodyear 10 year limited warranty it carries. I have a number of them in use that are well past the warranty, and they still look new and perform excellent.

Read Best Reviews of GOODYEAR 46512 3/8-Inch by 10-Feet 250 PSI Lead-In Rubber Air Hose With 1/4-Inch MNPT Ends Here

I bought this to run from my compressor to a wall mounted regulator/water filter. Made in USA of high quality materials. Looks like it will last a long time.

Want GOODYEAR 46512 3/8-Inch by 10-Feet 250 PSI Lead-In Rubber Air Hose With 1/4-Inch MNPT Ends Discount?

Aftrr finding lead in hoses at both HD and Lowes selling for $19 plus I thought I would give this a try. It is professional grade.

Save 45% Off

I needed a short length to go from the compressor to the hose reel I mounted to the wall above the compressor. Worked well.

Sunday, June 22, 2014

Arrow Fastener 504 Genuine T50 1/4-Inch Staples, 1,250-Pack

Arrow Fastener 504 Genuine T50 1/4-Inch Staples, 1,250-Pack
  • 1/4-Inch Staples
  • 1,250 per box
  • Flat crown with 3/8-inch width
  • Fits many Arrow models and other brands such as Powershot, Craftsman, Ace, Master Mechanic, and Stanley
  • Ideal for use with Arrow's T50SA and T50SHA

I purchased a staple gun as well and it was perfect for what I was doing which was re felting a pool table and bumpers.

Buy Arrow Fastener 504 Genuine T50 1/4-Inch Staples, 1,250-Pack Now

I know there just staples but trust me, you don't want jams with a lesser quality product. Works well every time. Recommended.

Read Best Reviews of Arrow Fastener 504 Genuine T50 1/4-Inch Staples, 1,250-Pack Here

I got both a staple gun and these staples on Amazon. I had kitchen bar stools at the island that had seen better days. I found a BRILLIANT piece of fabric to re-cover the seats, so I set my plan in motion. Amazon was GREAT once again, 2 day free shipping for Prime ..... obviously didn't wait long for these items. I sat to recover the first stool seat, but found that about every 5th staple got jammed in the gun. So it would be 3 minutes to open, empty, and re-load the gun every time this happened. Of course, by the end of the first stool's minor repair, I was sick of the project, frustrated about the lack of stamina in the staple strip. I came back to do another about a day and a half later. (no, I wasn't that p*ssed off, I just got busy with other things) Sadly, I had the exact same issue the entire time I did the second one. It's been more than a month and I haven't attempted to do the 3rd (of 6!) stool. The staples are just too frustrating.

***let me add a side note here: before you think I am just some chick that didn't know what she was doing with a staple gun or a "tool", let me say that I am NOT an amateur! I have used SO many tools, even the big, scary, "manly" ones that make lots of noise, ;) so it was NOT lack of intelligence on the operators part. In fact, I have also had prior experience with staple guns before. I like to do the little projects around the house just as much as my husband. The staples sucked!! bottom line. don't know whether they were just ancient, being passed off to rid the inventory of another box, but I was disappointed that the strips didn't hold together well enough to complete such a simple task. I think about 1/3 of them were wasted in the process. In my eyes, that's a waste of time and money.

Want Arrow Fastener 504 Genuine T50 1/4-Inch Staples, 1,250-Pack Discount?

product arrived timely and as ordered....

very pleased with the way the items were packaged and received to my door.

Save 67% Off

I used all 1,250 of these in the process of stapling 1,000 square feet of foil radiant barrier to the trusses in my attic. I had a few jams and misfires along the way, resulting in loss of approximately 5% of the staples. In short, I was sufficiently satisfied with the quality of these staples such that I ordered two more boxes to continue with my project.

Thursday, June 19, 2014

Midwest Can (MWC2300) 2 Gallon Auto Shutoff Gasoline Can

Midwest Can 2 Gallon Auto Shutoff Gasoline Can
  • 2 Gallon 6 OZ
  • Red, Plastic Gas Can
  • Extra Capacity For Mixing Oil
  • Spill Proof Spout Automatically Shuts Off When Tank Is Full
  • Bottom Hand Hold For Easier Pouring
  • Meets CARB & EPA Requirements

This spout is awful, I used it exactly twice before it broke apart trying to get it unstuck from my Subaru. I was lucky the tank wasn't full otherwise I wouldn't have been able to stop the flow of gas.

Buy Midwest Can (MWC2300) 2 Gallon Auto Shutoff Gasoline Can Now

The spout construction is terrible. It is impossible to pour without spilling. The mechanism is clunky, and the o-ring at the spout does not seal well. The hard plastic spout makes transportation and storage hard, and I am ever afraid of braking it. The cap is also useless. It is made of hard plastic with no seal. Its hook connects to the spout at location which obstructs the pouring. I tried to find the can with the flexible tube that slides inside it and is pulled out when pouring, but nobody sells those locally. I could only find this terrible type. This piece of crap is hard to use and outright dangerous. Good intention implemented in a very wrong way. I am sure it was created in order to satisfy some legislation, and I am writing this review in hope that the design gets reviewed and a replacement is implemented.

Read Best Reviews of Midwest Can (MWC2300) 2 Gallon Auto Shutoff Gasoline Can Here

This little container is just the perfect size for carrying and pouring petrol for the generator for our Travel Trailer. I don't know why others say it leaks, maybe I accidently did something right and lucked out for a change. Haven't the foggest what that might be though, all I did was follow the directions. Anyway, it's light, fits in strange storage places is easy to pour and handle.

1 gal is too small, 4 & 5 gals is too heavy for me. This one would be Goldilocks dream petrol container.

Want Midwest Can (MWC2300) 2 Gallon Auto Shutoff Gasoline Can Discount?

The only reason I am not giving one star is that I assume some machinery will push the spring loaded spout back correctly. However, when putting in my generator, it does not. I am left trying to pour and also pull back on the spout. I am trying to keep it in the mouth while pulling back -unless you have amazing skill you are going to spill -fire hazard. AVOID unless you are sure the usage you have will automatically push it back.

Save 64% Off

This gas can is good for the price but I don't care for the spout. I changed it to my old flexible spout that fits this can. It's much easier to use. I guess the way the spout works is alright but I prefer the much simpler flexible spout. Had to cut an air vent which I plug with a rubber stopper.

Friday, March 21, 2014

Coilhose Pneumatics BG-KITC 771 Pistol Blow Gun Kit, Includes Blow Gun, Various Tips, 1/4-Inch MPT I

Coilhose Pneumatics BG-KITC 771 Pistol Blow Gun Kit, Includes Blow Gun, Various Tips, 1/4-Inch MPT Industrial Connector, and 1/4-Inch MPT Automotive Connector
  • Durable and compact case stores easily
  • Contents lock into place inside case to assure that they remain safe and secure when transported
  • Blow Gun has 1/4" FPT inlet and 1/8" FPT outlet (tip)

UPDATEI took out my negative rating. Company is replacing defective nozzle. All is well and I changed rating. I only gave 4 stars because of having to get it replaced, but I like these nozzles overall.

Save 21% Off

Tuesday, December 3, 2013

Canless Air System O2 Hurricane Industrial Unit

Canless Air System O2 Hurricane Industrial Unit
  • One charges lasts over 12 minutes
  • Uses just the air we breathe
  • Charges like your cell phones
  • Cordless
  • Reduces your carbon footprint

Now that I've had a chance to let the unit charge, I've come back to edit my review. No instructions are included in the box. This isn't necessarily a huge problem: there is one button on the unit, and holding it down turns the blower 'on.' Letting it go shuts it off. It really can't get easier to use.

However, the online manual notes that the device should be charged for 10 hours before using, and a reference to this suggestion should be included in the box. The wall wart has an LED that shines green when the unit is charged, and red while it is charging; it took a little less than five hours for the light to go green on its first charge.

The duster definitely moves some air. The manufacturer claims airspeeds of 200 miles per hour; the air coming out the nozzle with or without the focusing straw does not feel as though it is moving at that speed. Comparing with a chemical air-duster, the chemical product does seem more powerful. The nozzle is also much smaller on the chemical duster to fit into the fins on small heatsinks.

However, the ability to run the electric duster for extended periods without filling the room with chemical vapors and bittering agents is a definite plus. While it does emit a high pitched whine while running it reminds me of a dustbuster hand vacuum I'm so far happy with this purchase.

Buy Canless Air System O2 Hurricane Industrial Unit Now

I repair copy machines for a living. It has really been nice to not breath in all the chemicals from canned air. I carry both in my bag but have not used the canned air since I started carrying the O2 system. I have even suggested that we replace our canned air with this unit. My machines are cleaner and I can use it at any angle. Try doing that with canned air.

Read Best Reviews of Canless Air System O2 Hurricane Industrial Unit Here

I didn't get this so much for my keyboard as for the collections of knickknacks that crowd our shelves. Wow, I was very impressed with how it blew the dust away. Yes, I know the dust in still "there," but I assume it will drift down to some flat surface where regular dusting and vacuuming will pick it up. Care must be taken on light items (little wooden carved animals from Oaxaca Mexico), because they will be blown over in the gale -you need to back away some with these types of items.

So I'm very pleased and wish I would have discovered this years ago!

Want Canless Air System O2 Hurricane Industrial Unit Discount?

I knew this product might not be what it was cracked up to be when they measured the air flow in MPH, and not in PSI, CFM, or SCFM, and they did not make a comparison to how it measures up to canned air in this regard. Basically this is just a small fan that blows air. It's force is maybe a little more than half of what canned air is. It is also very noisy due to the high RPM the motor has to run at to generate wind speed from the small internal fan. I rated this at two stars because it does work, but ONLY for very light duty uses. It does not have the power or force needed to remove fine dust particles or larger debris in tight spaces where you can't get right up on. You can also feel a reduction in air flow when you use the straw extension due to fact that the small motor can't handle the added resistance the straw adds. For what you get it is also a very pricy unit. I do a lot of electronic/computer work and it just did not fit my needs. I decided to return this product and bought a small electric air compressor at the local hardware store. It was cheaper than this product and has even more force than canned air. The only downside is it weighs more, but is still portable enough to not be an issue. I also can use it for other tasks other than just cleaning, which to me makes an air compressor an even greater value. For some, this product may work, but for me it just was not economical nor forceful enough to be worth while.

Save 15% Off

Purchased this because I was tired of buying the compressed air type cans, to clean off my keyboard and computer, every month or so.

Pro:

Rechargeable battery included

Will run continuously for longer than I usually need, won't crap out like the compressed air cans do after 20 seconds or so

Basically the same size as the compressed air versions

Con:

The only con that I have found is the noise that it makes, I have to be careful not to use it late at night, otherwise it might wake up the wife and kid. This was enough to take a star off the rating, otherwise it would have been a 5-star product.

Still glad I purchased it as it saves me money and does the job just fine.

Tuesday, September 24, 2013

Pro-Force VPF1581719 17-Gallon Oil Free Air Compressor with Kit

Pro-Force VPF1581719 17-Gallon Oil Free Air Compressor with Kit
  • Oil free, low maintenance operation
  • Equipped with pressure regulator, pressure gauge, quick connect air outlet, on/off switch and built in-handle for easy lifting
  • Fully enclosed shroud to protect the pump and motor
  • Includes extra value kit - 25-Feet recoil air hose, blow gun with safety nozzle, inflation needle and adapter fitting, dual tire chuck, quick coupler,1/4-Inch NPT male and female thread connectors and thread sealant
  • Maximum pressure: 125 PSI; CFM at 90 PSI: 3.5; CFM at 40 PSI: 4.8; RHP: 1.5; UL and CSA certified

Arrived in nice condition, appears to be well made, wasn't powerful enough to handle blowing out my irrigation system but I knew it probably wasn't enough cfm's to handle that job, though it did pop the heads on 2 out of the 7 zones. Seems sturdy, has a pop out breaker on the engine which I didn't see right away, so if you trip it be looking for that. My 15 amp outlet had trouble with blowing the breaker in my breaker box, but the 20 amp outlet I tried next had no problems. If you are going to use an extension cord make sure it is heavy enough gauge.

12/6/12 update

Still own this compressor, still functions fine but the amount of air it leaks after filling is more prevalent now than when I first got it. I think the quality of fittings is just not that great on the unit. You are suppose to empty a compressor tank when you are done using it anyway, but don't buy this thinking you are going to fill it once a month (or week) and use it repeatedly off that fill.

Save 11% Off