Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit

• 62-piece pneumatic tool kit ideal for do-it-yourself jobs
• Includes a 1/2-inch impact wrench with 250 foot-pounds of torque for quick removal of stubborn bolts and nuts
• Included 3/8-inch ratchet with 50 foot-pounds of torque removes and installs nuts, bolts, and sparkplugs quickly
• Kit also includes 1-5/8-inch air hammer; blowgun with 6 accessories; 10 impact sockets; and much more
• Includes a high-impact carry case

I found that the quality of the tools are very good for the price of the kit. The kit is also well made and holds the tools nicely. I did have to buy a bigger air compressor as my first compressor didn't push enough air to run the tools for continuous use..

Buy Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Now

The air tool kit look well, but you must know that you require a minimum 5 HP 13 Gal. or equivalent air compressor.

Read Best Reviews of Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Here

So i bought this kit based on the price and reviews, i'm a real DIY kinda guy, i was not disappointed with the quality and performance of the items. I was quite satisfied.

Want Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Discount?

This is a good way to get started with a new compressed air machine.

I got one for my workshop and this was available at a great price and I am familiar with the brand which is what I would call at least medium quality.

There is not much joy in it but you need an assortment of these and this is the best way to get it all in one package on the cheap.

Save 41% Off

I got these tools with my compressor. I have used the impact and ratchet and have NOT been impressed. I have not used the air hammer yet. I should point out that I have used a variety of air tools before, from many brands including snapon. This kit is a lot cheaper then high end tools and it shows.

Pros:

They work

Tools have not failed catastrophically

Cons:

Both are NOISY and use air like crazy

Impact was unable to remove the lugs on my truck. I tried different air pressures (my compressor goes to 200PSI) and my compressor has plenty of airflow (5.2 SCFM). I ended up having to break the lugs free by hand. After lugs where free, impact was able to remove them (albeit in a noisy fashion). Impact is able to tighten pretty well, but wear ear protection.

Ratchet works pretty well but is slow and lacking in power.

Overall, I have to give these tools a pass. They may work, but they are extremely noisy (even for air tools) and lacking in power. If you have a BIG compressor and need a couple of inexpensive air tools for cheap, this kit may be for you. Next time, I am going to buy fewer tools (I really only needed the impact) and spend more money on them.

Steele Products SP-CE155QT 4.6 Gallon Aluminum Twin-Tank Quiet Air Compressor

• 4.6-gallong twin tank air compressor
• Powers air tools and handles inflation jobs
• Quiet operation at 55 dB
• 1.5 horsepower, 120 volts, 60 Hz
• 4.2 CFM at 90 PSI and 5.4 CFM at 40 PSI

I bought this because reviews said it was very quiet. It performed to my highest expectations for two weeks (why I say 5 stars). Then it sprung a leak at the gauge connection and therefore will no longer retain air in tanks. I am returning today for a replacement of same item as I want to give it one more try. Amazon return seems to be painless and they are sending UPS tomorrow to pick up. Luckily I kept the box and stuck it in my attic or I would be up the creek with an silver colored aluminum anchor!! Can you say premonition?

UPDATE: UPS picked up first compressor as approved by Amazon. Second compressor arrived with a box looking like it was shipped through a war zone. No strapping tape and the bottom fell off when I picked up the box. Ran unit for 15 minutes with tank valve open to break in as specified. Then when I tried to fill tank it was quiet until twenty-five psi and then a terrible rattling inside the compressor started and remains. Probably a knock in the connecting rod. Bad unit or bad drop, who knows. Back to Amazon tomorrow. Good thing I'm retired or I wouldn't have time for all this nonsense. Down to three stars....I know I said one more time, BUT I'm hoping third time is the charm or it will be plan B: Makita.

12/8/2011. Well, I am happy with the third Steele compressor. Quiet, no leaks. It has been two 1/2 months and no more complaints. Back up to 5 stars.

Buy Steele Products SP-CE155QT 4.6 Gallon Aluminum Twin-Tank Quiet Air Compressor Now

I spent weeks reviewing the specs on every small air compressor I could find in-store, online and have-in-mind, before I bought this one. Weight, noise level, quality and CFM output were the comparisons. The CFMs actually listed on it are 5.2 at 40PSI and 4.2 at 90PSI. It has 55dB noise level which makes it the quietest compressor available. There's a huge difference between 55dB and 60dB because it's a logarithmic scale not linear. My concerns about not having wheels were removed because it weighs less than 50 lbs., compare that to 38 lbs for my retractable hose with reel. It arrives with only one part (air filter) to attach. This compressor is small, quiet and delivers enough CFMs to power professional pneumatic tools. It has a 1-year warranty which is the same as others. It's energy efficient using a 1.5hp. Right now, noise is a huge factor and our baby really is not awakened. In fact, no one complains when I power this up except they wish they had one too spoken in a normal speaking voice.

CON: The manual is terrible. 7 pages of generic information about hazards, risks, and instructions on how to operate all air compressors safely. One page of specific operating instructions. Two pages of diagrams for parts. However, the components mentioned in the operating instructions are not shown anywhere. There are a few mis-spellings/grammar errors but that's a very minor issue.

Buy it!

Read Best Reviews of Steele Products SP-CE155QT 4.6 Gallon Aluminum Twin-Tank Quiet Air Compressor Here

This compressor is every bit as quiet as they claim it is. It is no louder than 2 people having a conversation.

A couple of reviewers complained about the quality, but mine has been great so far, and was nicely packaged when it arrived.

Want Steele Products SP-CE155QT 4.6 Gallon Aluminum Twin-Tank Quiet Air Compressor Discount?

super quiet which is why i bought it. Not the highest CFM but that is not what i was looking for. ~I use this to fill bicycle tires in my shop and run small air tools. This is way quieter than the Makita Mac2400 with the same reservoir size. The makita has higher cfm.

Save 6% Off

Yes, the motor is a lot quieter than other ones, the problem is that there is also a high pitched whine (whistle) that is so loud that you can't even hear the compressor motor working after a few feet away. Not really what I was looking for in a so-called 'quiet' compressor. Buy the other one that's available.

Sharpe 880A Air Control Filter, Model# 880A

• Regulator with 160-lb. inverted gauge and air cock
• Filtered main line outlet
• Additional regulated outlet
• 5 micron filtration
• 1/2in. inlet; 1/4in. outlet

I searched for quite a while to find a filter/regulator capable of handling 175+ PSI and was glad to find this unit in my price range. Amazon clearly states it will handle 200 PSI Max however upon reading the instructions that came with it, it claims to only max out at 160 PSI. I am disappointed to say the least.

Save 25% Off

Rolair JC10 Super Quiet 1HP Oil Less 2.5 Gallon Air Compressor

• One of the quietest and most reliable air compressors on the market today
• 2.5 gallon tanks capacity means you can work longer with less waiting for the compressor to catch up
• Oil-less design reduces maintenance and downtime
• Compact and lightweight design makes it easy to transport to and from the job site
• Protective roll cage helps prevent possible damage when transporting

This is a great small compressor for interior trim work. Exceptionally quiet. So quiet if you are working in a house with a radio on and the compressor is in a different room you won't hear it. This compressor is slightly different than other small compressor I have used. It has a 1Hp motor and plenty of power. It has a high volume direct drive pump,producing about 2CFM @ 90psi ( sorry I do not have the exact specs). One motor and 2 compressor heads. It weighs about 38 pounds, light enough to carry easily, but slightly heaver than some of the other small airless compressors on the market. Rolair compressors have always been a top of the line unit, you can see they used top quality components, but you can see the bare bones approach to the design to keep the cost down. So many of the other compressors on the market use inferior components to keep the cost down, and it shows in the operation.

It has a typical cartridge air filter, very good quality gage's that really work, A high quality type M universal hose coupler, and good quality materials, and components throughout. It obviously is not a continuous run compressor, like most oil less units, but I was not able to find a duty cycle for this unit. It still has plenty of air to run 2 trim guns, or to do other small jobs. My complaints are minor. The hand grip could be improved, it would be just as easy to carry this with out any grip on it. The anti vibration feet on my unit were not installed square to the frame, so it dose not sit as well as it should. The electric cord has no place to wind up, if it had a cord snap on the plug at least you could wrap it around the frame and snap it to itself. I would also like to see 2 hose connectors in stead of one. All in all this is a top quality, provisional grade, compressor at a very reasonable price.

Buy Rolair JC10 Super Quiet 1HP Oil Less 2.5 Gallon Air Compressor Now

Excellent small compressor. More quiet than any other I have seen; usable in an occupied room with few complaints. Very rapid recovery rate, and very little vibration.

Read Best Reviews of Rolair JC10 Super Quiet 1HP Oil Less 2.5 Gallon Air Compressor Here

This compressor ROCKS!!! It's not made to run all day or run a lot of guns. But if you do trim or cabinets, this is perfect. It has enough power to run a 18ga and 15ga nailer and drive it into 2 inch thick oak. It will not disturb others in the work environment. I used it to install cabinets in a open office environment and no complaints of too much noise or oil leaking on the carpet. It really dose what it was intended for. I rate 5 stars!! Rolair knocked it out of the park on this one!! If you want a light weight and really quite compressor.this is the one!! Made in the USA!!

Want Rolair JC10 Super Quiet 1HP Oil Less 2.5 Gallon Air Compressor Discount?

The other reviewers were spot on, thanks folks!

I was worried this might be a bit overhyped, but holy moly! This thing is quiet! It came on with a purr, aired up in less than a minute and I sunk a good 10 or so finish nails before it cycled on again. It refills in about 8-10 seconds. Very consistent. Wonderful.

My last portable compressor was one of the cheaper pancakes. It did the job, sort of, but I hated that thing! Loud doesn't begin to describe that banshee! Imagine someone shaking a coffee can half full of bolts in your ear for 10 minutes. I'll make concessions for power, but that thing didn't offer any of that either. For all the noise it made, it couldn't keep up with this Rolair, I'll tell you that. I finally burned it up forcing it to keep up on a roofing job. Went Office Space on it. Good riddance. Worst money I've ever spent on a compressor.

This little compressor only cost $50 more than that howler monkey, so this little Rolair is a dream for me. Like complete opposites.

Not sure yet how it will stand up, but so far it has kept up with every nailer I use. From the finish nailers down, it keeps up easily. With the larger nailers, like my roofing and framing nailers, it will keep up at a slower pace, but I wouldn't put a continous duty cycle like that on one of these. For small jobs, no problem though, and the lightweight pleasant nature of it makes it a joy to use. It is no heavier than a kettlebell, so I can flip it over a shoulder and walk up a ladder with it. It is squarely framed and sits squat, so it is stable in the back of my truck or I can toss it on a seat for transport. I like to keep him on the seat so I can pet him while I'm driving. He likes that. Just kidding, but seriously, I'm loving this little thing. It's like R2D2.

The comments others have made about the viewing angle of the guages I would agree with. It sits so low that viewing the guages takes a tilt to accomplish and when you're swapping guns often that slows you down. I don't care, I'll relocate the guages. I love this little guy.

5 stars and a rebel yell from me!

Save 39% Off

Actually got this for 189.00 at tools plus.At the time amazon was 200. It is whisper quiet and easy to haul around. I looked extensively at the Bostitch 1512 and the Mac 700 which are also excellent choices. Thing that sold me on this was Dave Reinhold's video for tool nut on you tube.It does everything I need it to do from light framing to extensive trim work,could not be happier.

Air Compressor Pressure Switch

• Kicks in at 90 PSI
• Kicks out at 120 PSI
• Metric Tubing
• Used for Most imported electric air compressors
• On off switch

This switch works great. The only thing was it is a universal switch so the fittings were not the same as my compressor, so I had to change all the fittings and alter the cover on my compressor but I didn't mind that and it works just like it is supposed to.

Buy Air Compressor Pressure Switch Now

If you are a handyman this is the right part for the job. If you are not comfortable doing high pressure pluming don't try this as a home replacement. It was a direct replacement for my Harbor Freight compressor pressure switch. It takes some thinking to get it in place and good technique (tape/ sealant) but if you have the right tools and are mechanically inclined go for it. I was glad to find an exact match at a great price.

Read Best Reviews of Air Compressor Pressure Switch Here

after I installed the new air pressure.I had to pull the top off to wier it up .I could not put the top on with the on-off switch button in place. Now I have to unplug it to stop it.

GMC SYCLONE 3010 Ultra Quiet & Oil-Free Air Compressor

• Only 60 decibels
• Oil-Free
• Lightweight
• Portable

Let's start with the bad:

a) I was disappointed that a GMC machine would have alternate language translated into English labels. This to me means it was designed and manufactured NOT in the U.S.A. which is what I would expect from a company the US government just bailed out of bankruptcy.

Things like "Being sure allowance for opening of nothing water rusting evenly" gibberish. Ripped those off buu bye.

b) One of the legs had suffered an extreme impact. I had to use a large piece of steel and heavy hammer to bend the pipe back into round so I could put the rubber foot on. Better packaging with emphasis of protecting the bottom of the unit would have prevented this shipping damage.

c) The quick connect was the biggest piece of junk ever. Getting it to release is difficult. Getting it to hold the hose connector, difficult. Leaked A LOT unless the hose was perfectly aligned which isn't always easy with a hose filled with 90 lbs of pressure. Watching the hose self release after being attached for two days and fly across the floor and getting my ears blasted to bits with the concussion of the air rushing out of the hose was the last straw.

For $1.90 and a trip to the hardware store I replaced it with a high quality quick connect valve and tossed the GMC valve in the recycle bin. All I can say is this was a ridiculously cheap connector.

d) The release valve started leaking after I used it the first time. I took that off and found there was a small metal pellet, about the size of the head of a needle that had gotten in between the two surfaces of the valve. I cleaned it out by turning it on with the valve still removed and it blew a couple more little pellets out. After that I haven't had any problems with the release valve leaking.

Now for good stuff:

a) This is a very quiet machine. I can be in my 16 x 20 shop listening to the stereo at moderate level and this comes on and I can barely even hear it. By comparison air blasting the dust off my bench is probably three times as loud as the compressor!

b) This has one of the fastest recharge times of any compressor I've ever used, which is good because it's a small unit. And that's the main advantage of it. Small and Quiet.

c) It's good enough pressure and a quick enough recharge time for finish work and dusting, and being that I make guitar amps and cabs in a small shop, that's exactly what I needed.

I have a 20 gallon oil compressor for any bigger jobs. It's also quiet, but big as a cow and just about as heavy not the kind of thing you can use in a small shop like mine.

d) For a sort of ugly duckling appearance, the look kind of grows on you after a while.

e) It's easy to carry. As in I'm 5'6" and 55 years old with a back problem and I can just whisk it off the ground with zero pain.

Synopsis:

Overall I'm very happy with the performance of the unit, but a bit disappointed in the quality control, and the foreign language translation was just an extension of the lack of attention to small detail.

For the price I guess this is what you get. This is a fantastic deal if you're handy enough and willing to make an upgrade and repairs like I mentioned right out of the box. If not, *surely* you have a friend like me that will happily come over and help you and share a six pack. Hey, works for me!

Buy GMC SYCLONE 3010 Ultra Quiet & Oil-Free Air Compressor Now

I love this compressor. Quiet is the first thing you will notice or at least not notice. It's the lack of pounding sound that you will notice right away. You'll stand there for a second and wonder why you hadn't heard about this unit before? Then you'll try and remember what that old compressor sounded like banging in your ear. Shake yourself out of it and realize life is good now, you made a good choice.

I make a living as an artist, mostly an airbrush artist so I know about quiet compressors. This is not as quiet as my $800 AirForce unit but I would use this in my studio no problem. Instead I use in for all the utility work needed around the studio; nail guns, spray guns, impact wrenches, flat tires and any other item you can hook up and work with air in a shop. I don't know from experience if you could hook up a number of nail guns to this unit at once but I used it to run every air tool to build my studio addition including the Bosch framing nailer. Worked like a champ. It's also fairly light and can be carried around, within reason, without much strain. I keep it strapped to a small hand-truck just for added convenience. I'd recommend this compressor for a small shop like I have and maybe even for a small general contractor. For the price, it's a winner.

Read Best Reviews of GMC SYCLONE 3010 Ultra Quiet & Oil-Free Air Compressor Here

I did not encounter any of the small problems that Unit 1 had. I use this to blow out my underground sprinkler system. This is the third compressor I have owned for this purpose.

Advantages: small, portable, relatively high air volume output for its size, amazingly quiet.

Disadvantages: none.

Would buy again. Will update this site if/when it ever disappoints me.