Showing posts with label horizontal air compressor. Show all posts
Showing posts with label horizontal air compressor. Show all posts

Thursday, November 14, 2013

Makita BMR100W 18-Volt LXT Lithium-Ion Cordless FM/AM Job Site Radio, Bare Tool Only

Makita BMR100W 18-Volt LXT Lithium-Ion Cordless FM/AM Job Site Radio, Bare Tool Only
  • Delivers rich stereo sound from two powerful 3.25-inch side-firing speakers
  • 10 pre-set FM/AM buttons and MP3 compatibly
  • Protective bumper design for added durability
  • Makita compact lithium-ion battery and Energy Star rated 15-minute rapid optimum charger produces 430 percent total lifetime work with 2.5 times more cycle
  • 3-year warranty on radio

I wanted a shop radio that played mp3 and wasn't a 25 pound suitcase that used up half a workbench. The radio sounds fine even in a big open 1200'sf shop although the speakers are only 3". The compact design fits right on a shelf and it appears to be fairly dust resistant. It uses both types of Makita rechargeable batteries which is handy if you have a lot of the old NIMH pods. It has alarm and clock functions and two inputs for AUX components but the downside was the sound from an ipod. It just is not very loud even at full volume on both units. I tried both a hd based and a nano flash ipod. Sound was just ok but disappointing if you want loud music. Perhaps some newer generation mp3 players would sound better but I have encountered this problem before patching in an ipod to another unit. There are no tone controls so what you hear is what you get. Overall this is a nice rugged compact job/shop radio but just a so so mp3 device.

Buy Makita BMR100W 18-Volt LXT Lithium-Ion Cordless FM/AM Job Site Radio, Bare Tool Only Now

This radio is everything I expected it to be. Rugged, small footprint, stylish, has great sound (amazing base response considering the size) digital presets for AM and FM radio, water/dust tight compartment for tool battery and or Ipod/mp3 player or to store included 12v power adapter. I use an Ipod shuffle connected to the auxiliary in #2 jack located inside the sealed compartement. It works flawlessly. The radio locks on well to FM stations and not bad for AM stations (I like to listen to talk radio as well). The presets are great and easy to access. The dual function tuner dial is very smooth. Push it in and it changes volume, press again and it changes tuning. Also has channel search function, auto off function for those who like to fall asleep with radio on, wake up tone alarm and clock radio function. Also has 2 AA battery backup inside water proof compartment to save presets and displays the time on the lcd screen. The lcd screen lights up when any button is pressed then shuts off after a short delay to save power. All in all a great radio. So what it doesn't charge batteries. I use cordless tools all the time and generally don't use the stock charger anyway. I buy the fast chargers so don't need another with the radio. It would have been nice to include the transformer inside the unit so a regular 120v a/c cord plug could be used when not using a Makita battery. Oh by the way, I don't own any Makita tools anymore so I just use the power adapter. No problem. I've used the Bosch, Milwaukee, and seen the new Ridgid jobsite radio's. They are all large, bulky, heavy,loaded with unesessary features and parts break off of them. I am enjoying this radio very much and highly recommend it.

Read Best Reviews of Makita BMR100W 18-Volt LXT Lithium-Ion Cordless FM/AM Job Site Radio, Bare Tool Only Here

This is a great sounding radio that's durable. The "shell" around it is very well made and it feels indestructible. The sound quality is great, although sorta directional, and the tuner works better than the Dewalt. The dials have a solid feel to them. I bought the white one with the auxillery plug for my Ipod and it works well. The drawbacks are the same for everyone: It doesn't charge a battery and it has a seperate AC adapter that could easily get lost or damaged. All in all I like it and would recommend it to someone who has Makita Li-ion cordless tools.

Want Makita BMR100W 18-Volt LXT Lithium-Ion Cordless FM/AM Job Site Radio, Bare Tool Only Discount?

This radio is designed for people who (1) already own Makita power tool batteries and (2) want a rugged portable radio. It does not come with its own battery, and does not charge batteries (including the one used to power the radio). It is not hard wired for AC. You need to plug a not-so-rugged AC adapter into the front of the unit. Although the radio will probably survive being kicked or dropped, the AC adapter/wires/plug may not.

For those who like to take naps at their job sites, it includes a sleep function and alarm!

Overall, this radio was designed for a specific job, and does its job very well.

Just got our radio the other day. As everyone says, the sound is pretty good for a simple jobsite radio. I'd like to adjust the tone, as it is a little too biased toward bass for me, but not too bad. Probably OK out in the open air rather than in the garage or house.

Note that you cannot use the internal AUX2 input with al LXT (or probably any other slide type) battery. The input is right behind the battery. You can't put the aux plug in first, nor the battery and then the plug. I even bought a 90 degree adaptor, but it still doesn't work. You must use the front external AUX1 input, which is not much protection for your MP3 player.

I'd give it 5 stars otherwise, but this lack of foresight drops it at least one star.

Saturday, September 21, 2013

Eastwood Soda Blaster - Blast - Blasting Paint Removal

Eastwood Soda Blaster - Blast - Blasting Paint RemovalI bought this to use in a home garage with a 155 psi compressor (11 cfm) to strip car paint. The premise is wonderful and when it works, it does a great job. BUT...you need to ensure that your air-lines are absolutely dry. Mine aren't and I spend more time clearing and trying to get it to work than anything else.

You should also note that what you're buying is the original sandblasting setup with fittings adapted for soda blasting that you need to install. It's not hard to do, but not all the threaded pieces tighten in the best positions, and the hoses aren't the easiest to manipulate. It would have been better if Eastwood either installed the soda fittings before shipping, or didn't install anything.

Heard that these work great on wood finishing, also metal. Sand works beter on metal than soda, soda works great on work. Thanks for speedy shipping

Buy Eastwood Soda Blaster - Blast - Blasting Paint Removal Now

Sunday, September 8, 2013

Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner

Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner
  • 5,000 BTU cooling capacity
  • Cools room sizes up to 150 sq. ft.
  • 2-way air direction control
  • Anti-bacterial mesh filter type, side slide-out filter access
  • Rotary controls

I spent quite a bit of time researching A/C before purchasing. We live in Oregon and it doesn't get too hot but there's a month or two in the summer where the heat and humidity get oppressive in the house. I wanted an inexpensive, small, window A/C to increase the comfort. I wanted something small enough that I can store it the other 10 months.

So, after much research I ordered this model. I was going to get the 6K BTU model with the electronic controls but I figured I would get something super cheap and if it didn't work I could use it as a single room cooler. Shipped free which makes this a pretty good deal. Arrived in about a week.

Installation was easy, following the instructions in the manual. I did have to install and remove the A/C about 3 times to get all the sealing right. In the box there's a lot of different thicknesses of foam and foam tape. There is no specific instructions about what to do with this, except the stuff for the top gap of the upper sash. So, I experimented with various combos to get a good seal. We have recent vinyl windows with screens but no storms so the unit basically dropped right in. However, there are some gaps around the bottom in this configuration. I stuffed these with the thickest foam that came with the unit. This did the trick but didn't look too great. Luckly I ordered extra foam tape as another reviewer recommended, and I used small pieces of that to caulk around it inside and outside, leaving the big foam inside. It actually looks pretty neat and professional. $4 well spent ;)

Anyway, the unit is installed in our main living room. We are in a 1940's box bungalow so this room is about half of the width and length of the house. The bedrooms and kitchen connect to it. With it on HI cool/Max(7) the entire house has been very cold and huge amounts of water have been pulled out. We will see how it performs in the upcoming week of 95+ temps. We keep a few $10 box fans around to circulate air so I can move the cold air around.

One thing is that I have heard mentioned on a few other models is that the fan catches water in the pan and spits it around. This is a feature and not a bug ;). The unit is designed to pitch backward slightly when properly mounted. Moisture removed from the room collects at the bottom. The fan blade is coated in rubber and it's designed to suck water up and spray it on the evaporator coils. This facilitates some precooling of the outside air. It drastically increases efficiency. I would not drill drain holes, as other people have mentioned.

Summary:

$100, and my house is cold AND quiet. You can't say much more. If it's not enough for the hottest day I might get one more and move them to the bedrooms. It's very quiet on low but I like white noise.. I hope it lasts, even if it doesn't I'd gladly pay another $100 in 2 years.

Buy Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Now

I got it hoping it would keep my apartment cool-ER. I expected it to keep it comfortable, not cold. I also had a bit of a problem with size. The only window that opens in my house is a vertical sliding window, which Air Conditioners I can afford, aren't made for.

Once I received it, I started to assemble and install. Originally I was going to leave the extensions off, since my window was only 18 inches wide, but after I got it and thought about it more, I realized they could still help keep it supported. So I put them on. They are about an inch inside the window, to help it from falling out. Also, I originally hoped to buy some wood and put that above it, but once I saw how sturdy it was with just the extensions, I put cardboard above it and plastic taped around the edges with duct tape. Very red neck, I know. It's sealed with the help of some other bits that came with it to help seal it.

I installed it a little over 12 hours ago and my home is cold. I live in a house above a garage. Just a large living room, average bathroom and small bedroom. It's 621 SQ Feet.(assuming I did the math correctly. 23 x 27 feet.) This is total, but there are 3 separate rooms here. (Also, I have a low ceiling, only 6.5 Feet.) I placed it in my only opening window in the living room and it keeps the bathroom cold which is closest, and my bedroom pretty cold too, which is farthest. A lot larger than advertised for. I didn't care, I needed a little cooler than I had. Before, it was hotter inside than it was outside. I have it on high, but will consider turning it down, which I never thought I would do. I like the cold. It's THAT cold.

For $110, I got an amazing air conditioner that perform WAY better than expected/advertised and it got here exceptionally fast too. It arrived 4 days after I ordered it with standard shipping and handling. I am a very happy costumer.

Read Best Reviews of Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Here

I have run this all summer, purchasing it about five months ago.

It has been a relatively mild summer with only 12 days over 100 degrees.

Pros -

Easy to Install

Excellent Size for Small Windows

Fairly Quite to run (would not bother me if I slept in my office)

Keeps my office 11x14 frigidly cold when set on max (temp 7 of 7)

..(takes about 8 hours to cool down a hot room with the door closed)

..(I keep it on 5 out of 7 on the temp gauge, that even gets a little cold at times)

Cons -

The Directional Air Flow vents are poor

Not much difference between the High Cold/Fan settings and Low Cool/Fan settings

When rain blows against the unit the accordion extensions collect a little water along the bottom

I am considering getting two or three more for my house next summer.

I had one of my Frigidaire window units at the house die this year, it was twelve years old.

**UPDATE**

September 22, 2011

One year later to the date. No this was not planned. This little unit lasted through another summer, and this one was not so mild. I lost count of the days over 100 degrees. I did not buy any more for my house, as I moved into a new home with central air. This unit does however continue to cool my office as it was purchased for.

It was stored all winter in the utility closet off my office (i.e. indoors, warm, and dry). It was washed down with a power washer before being re-installed in the window this year.

Pros -

Excellent Size for Small Windows (I am still amazed I found a unit that fit)

Fairly Quite to run (I don't notice it running anymore, and no customers have complained)

It can still freeze me and my customers out when set on max temp (7)

..(I timed it again and it still takes about 8 hours to cool down a 11x14 hot room)

Cons -

The Directional Airflow vents are very poor (they are basically useless)

Still not much difference between the High and Low settings

..(I fixed the rain issue above by using plexiglass this year)

Rust has started to form on the outside grill and corners where the condensation drops

For those of you wondering, the reduced star is because of the directional airflow issues. Another review mentioned the styrofoam can be seen, and was probably used to fill the gaps. This is true but after two years it still seems to be in good shape. It also appears to be fairly thick. Some other items I tested this year...

Room size 11x14 (left on this setting for 24 hours before temperature was measured)

Average outside temperature during this week of tests was 98 degrees.

Setting Cool/High 7 brought the room to 58 degrees, outside temperature 98

Setting Cool/High 5 brought the room to 63 degrees, outside temperature 96

Setting Cool/High 3 brought the room to 74 degrees, outside temperature 100

Setting Cool/High 1 brought the room to 89 degrees, outside temperature 99

All temperatures were read at 4pm.

**Please note this was my unit's performance. Yours may differ.

Yesterday it was put back in storage until next year. I considered getting a sound level meter or loudness level meter to measure the actual noise my unit puts out, but I have not got around to that yet. Maybe next year.

Want Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Discount?

If you're like me, when you've been out shopping, say Walmart, Sears, or some of the other places you might have noticed, especially in the hot summer time, these smaller cheaper A/C window units on store shelves. For the most part, they've looked cheap and I've never seriously considered buying one as my standards are a bit higher.

However, here we are, summer 2010, NE Kansas and the temps are rough, especially in my back room. I had to do something.

This is where this little gem fits it.

Spending a bit of time doing some research on getting the right Window A/C unit for my room at a price point I could afford, brought me here. In short, I have to more than agree to everyone's positive review on this item.

This thing screams quality. The boxing / packaging is great. The fit and finish of the unit is perfect. Some very skilled design and workmanship went into this A/C. You could honestly not ask or expect any better. People are saying this thing cools down 2 or 3 rooms with ease. My application will just be one med size bedroom. So far, I have it set to low cool on 3 or 4 and the room is night and day different in terms of comfort.

I paid $126 for this unit off eBay. I was saddened to find it for $100 shipped elsewhere which, they have in stock. Do a google search for "Conn's Frigidaire FRA052XT7" and the product will pop right up for you. It's $89 there with $10 dollars 3 5 day shipping.

For the money, the weight of the unit, the fit and finish, name brand, etc. This is about the best investment I've made in sometime. Hats off to the folks at Frigidaire. I mean really, I just cannot put this fantastic product / experience into the words they deserve.

I wish I had Bill Gates money, the first thing I would do would be to order 500,000 of these units, sit up a Midwest distribution center with offices and coordinate with local and national cities that account for some of the highest heat related deaths and get these cherished older generations who we owe everything to, these people with out means who are dieing of heat and get them this A/C. Box fans do not cut it.

Save 21% Off

I live in a basement apartment and struggled to find an AC for my tiny windows the opening is only 16.5 inches wide and 18 inches tall. No window air conditioner would fit that space. I had an 8,000 BTU portable A/C but that thing was just very inefficient drawing in hot air from the outside as most portable units do because they constantly exhaust hot air and new air has to come from somewhere. Long story short, I stumbled upon this little unit and found out it was only 16 inches wide (sans the side panels). It fit my tiny window perfectly. Most importantly, it also does not protrude very far to the outside, and important consideration when people walk past your window.

Mounting this unit was easy. It is so light that you don't have to struggle with it like most air conditioners. You should not get a hernia lugging this unit. It also puts very little strain on the window frame and does not need any additional brackets. To my surprise, the unit also came with tons of mounting hardware including insulation often not included with other units. There was even a piece of foam to put in between the two window panes to insulate the gap in between two open windows. Nice.

I noticed a lot of people out here mount the unit in an angled position. You do not have to go out of your way to do that. If you mount it right, it angles slightly to the outside by itself. The reason for this is so that the water that accumulates in the unit flows outside and not inside. You don't have to tilt the unit outward as much as many of the pictures on here show.

What the unit lacks in size it does not lack in output. At 5,000 BTU, I was not expecting much, but this unit outperformed the 8,000 BTU portable unit easily, drawing 1/3 less electricity. It cools the entire 400sqft apartment with the help of a fan. (a well-insulated apartment, don't expect it to cool 450sqft in a poorly insulated or sun-exposed building) It is one of the quieter units out there, producing a constant hum rather than sounding like a freight train like some units. The most noise comes from the fan. The compressor is barely noticeable. It is a no frills unit with manual controls but they work pretty well. It maintains the room temperature better than many electronic units. Set to level 6, it cools the room to a comfortable 73 degrees, level 7 cools to about 69 degrees. it cycles on and off nicely and quietly. Finally, the build quality seems rather good nothing rattles or vibrates.

Overall, this is probably the best little AC out there you can get. If space is a problem and you were considering a wasteful portable unit, give this little guy a try.

Saturday, July 20, 2013

Iron Horse IHCT-10 10-Gallon 150 PSI Max Portable Air Tank

Iron Horse IHCT-10 10-Gallon 150 PSI Max Portable Air Tank
  • Portable air tank adds convenience
  • Rugged 150 PSI capacity
  • Provides maximum performance
  • Ideal for any shop, farm, or home
  • Includes regulator and gauge, air hose, and tire chuck.

I purchased the Iron Horse IHCT-10 10-Gallon 150 PSI Max Portable Air Tank and when it arrived, while still in the box, I noticed rust spots all over the tank. After I removed the tank, I conducted a leak test by adding about 40 PSI and then sprayed all connections with soapy water. The manifold connection going into the tank leaked so I tightened the manifold. Leaked worse so I removed the manifold and I found the same condition as a review for the Iron Horse 5-gallon tank. "The tank arrived in good condition (no dents/damage), but after further inspection I noticed the tank contained all kinds of debris internally. I had to disassemble the valve body and then spend hours fishing metal slag and chips, some so big in size they would not fit through the 3/4" threaded opening (I had to break-up some to remove). I would strongly suggest using an in-line filter if using this with an airbrush, tool, etc." No point in repeating the previous review. I cleaned the manifold threads, applied a high quality Teflon sealer to the threads and screwed it into the tank. It leaked worse than before. Had I tightened it any more I would have broken the manifold. There is absolutely no quality control with this product so I returned it for a more expensive 10-gallon tank. Same leak test and no leaks. BTW, the air hose is replaceable by unscrewing it from the manifold, but the chuck is not replaceable. I forgot to mention that the paint was flaking off the pressure gauge. I initially gave it a one star due to quality control then changed my one star rating to a two star rating only because the air tank did what it was designed to do, but it lacked quality control when compared with the replacement tank. The rust may or may not be an isolated case.

Buy Iron Horse IHCT-10 10-Gallon 150 PSI Max Portable Air Tank Now

i was hoping to get something that would hold air. This definitely DOES NOT do that. this product sucks. do not buy this product.

Read Best Reviews of Iron Horse IHCT-10 10-Gallon 150 PSI Max Portable Air Tank Here

They neglect to mention that the air hose is SOLDERED TO THE AIR OUTLET. If you wanted to use it with a different hose, too bad. Product should be named "ten gallon portable tire inflater".

Want Iron Horse IHCT-10 10-Gallon 150 PSI Max Portable Air Tank Discount?

I bought these tanks specifically to use them as expansion tanks in my air system due to their 150 PSI rating. When they arrived I was immediately impressed by the quality of the fittings they used and the nice braided airline. I actually just bought a third unit today they are a far cry from the cheap units you see that hold less pressure.

I wanted to expand my Makita MAC2400 Big Bore 2.5 HP Air Compressor's capacity, which has two 1/4" quick couplers. I knew, from reading the reviews, that the Iron Horse was set up for tire inflation; that connection is a 1/2" thread into the IH tank -I had to use a impact wrench to get it out. I used a 1/2" to 3/8" reducer from HD, along with a 1/4" quick coupler to suite my needs. I now have a portable tank that I can easily fill, move, or simply expand the Makita's capacity.