HQRP 6V 1500mAh Battery for Paslode 404400 / 900400 / 900420 / 900421 / 900600 / 901000 / 902000 / 9

• HQRP® Rechargeable Oval Battery plus HQRP® Coaster;
• Battery Voltage: 6V, Capacity: 1500mAh; Ni-Cd;
• 100% compatible with Original Battery;
• 200 Days warranty!

I do not know if it will hold up as long as the orignal but we'll see if one of these china made batteries will last

Buy HQRP 6V 1500mAh Battery for Paslode 404400 / 900400 / 900420 / 900421 / 900600 / 901000 / 902000 / 9 Now

A real bargain price. A cost saver, well made and packaged, at literally a fraction of the price of the "name" brand battery.

Senco 1C0001N AF25 Air Free 5/8-Inch to 2-1/8-Inch 18-Gauge Brad Nailer

• Drives up to 1,000 nails per charge
• Includes two 12 -volt/ah batteries
• Adjustable depth of drive
• No expensive and smelly fuel cells
• Belt hook

I am a professional finish carpenter working in cabinet shop. I have been using this gun daily for three months. In the beginning it worked just fine, but it did not hold up. I do NOT use it heavily, mostly to install crown molding and scribe, perhaps a strip of nails a day maximum.

It started out not setting the nails properly, and now the belt is not driving the nails at all. The belt driver winds up and then winds down and won't shoot. Out of 8 carpenters in my shop who purchased this gun, I am number 6 to have to return it due to this defect. We have been instructed not to purchase anymore until they work the bugs out.

It may be a fine tool for a handyman or a casual user, but if you're a professional and need a reliable nail gun, I would recommend sticking with a compressor and a traditional air brad nailer.

Buy Senco 1C0001N AF25 Air Free 5/8-Inch to 2-1/8-Inch 18-Gauge Brad Nailer Now

I tried one of these units out at a recent Rockler woodshow near here (Minneapolis). They are a *great* leap forward for airless nailers. I almost bought one until I reminded myself that with the same amount of money I could buy a small pancake and nailer.... The cost efficiency goes down further if you need a 15 gauge as well as an 18 gauge.

The air free units work by spinning up a small flywheel that then discharges its kinetic energy into a pin. This is different from the previous electric nailers that didn't have that extra mass (and thus weren't powerful enough for 2" brads), or from the other airless units like the older Porter-Cable that used chemical cartridges (that caused jams or ran out unexpectedly), or the newer P-C ones that have a small compressor on them (that are heavy).

The Sencos put a 2" brad right through the 2x4 pine they had at the show. You can control the depth of shot and the trigger action is very smooth. There are safeties to make it harder to put a brad through your thumb but if you want to do it, its always possible with a little due diligence on your part.

There was very little "spin-up" time and while you can't go bam-bam-bam-bam as with a pneumatic, you can go at a pretty comfortable pace. Not having a cord would be great for working on a ladder or in a location where electricity hadn't been pulled in yet.

The batteries seem pretty solid. I was at the show all day and it didn't look like they had to replace the batteries once. I wish the batteries were compatible with Porter-Cable or Dewalt or some other series so that you could share chargers. I'm sick of the pile of battery chargers I have in my shop.

Overall, two thumbs up. If they can get the weight and price down, that would be a further bonus. But you're buying from one of the leaders in high quality nailers, so the price is eminently justifiable.

Read Best Reviews of Senco 1C0001N AF25 Air Free 5/8-Inch to 2-1/8-Inch 18-Gauge Brad Nailer Here

This is the best idea in a brad nailer to come along yet! I'm a cabinet installer in south Florida. I install cabinets in new homes, 240 houses per year. I've been using the AF25 for about 3 months. I use it every work day to install toe kick, crown moldings, valances, and other various trim. It works efficiently, and effectively, and so far without even a jamb. The depth control works precisely, and it drives nails perfectly, every time. I drive about one stick of nails per day. The battery charge lasts me about three weeks at this rate of useage. I never want to go back to compressors and hoses again! This nailer is a little bit larger than the conventional brad nailer, but it is light weight and the size has made no difference in daily performance. This is a light to medium duty tool. When you pull the trigger it "winds up" before delivering the nail. This was a surprize the first couple of times. If your a person that requires instant and rapid response this nailer is probably not for you. On the other hand, while this shoots a little slower, I can be done with my nailing tasks before the other guy has got his compressor set up and running! Great tool for every application short of the production line. Thanks Senco, this is what the trade needs!

O.K. I wrote this review two years ago. It's been a year since I last used this nailer. Everything I said above was true, it performed beautifully until it was about a year old. It then started to malfunction. It would wind up but it wouldn't deliver the nail. I took it to the local Senco service center, it was still under warranty, they kept it for a couple of weeks, and said it was fixed. It wasn't. I took it back and they refused to take it in for service. They said they only were set up to fix pnumatic tools and these "new fangled electric" nailers were beyond their capacity. It's now sitting in my shop collecting dust. Guess who won't be buying Senco again!

Want Senco 1C0001N AF25 Air Free 5/8-Inch to 2-1/8-Inch 18-Gauge Brad Nailer Discount?

Just finished about 200 linear feet of baseboards, casings, and quarter-round. For the first half I used the old hammer and nail set, the second half I used the AF25 and was absolutely amazed at the results. The AF25 easily cut the install time in half and left me to concentrate on my cuts. The wind up time was not a bother, and you can still drive brads at a pretty good pace. I was trying to decide whether to go with this, or the Porter Cable pnumatic kit with the pancake compressor. With the Senco, there is no compressor to lug, no hoses to string, it's much quieter, and comes with 2 quick charge batteries so there should never be any down time. There is the drawback of not easily being able to add additional tools (like a framing nailer, etc.), but the brad driver will handle 90% of what I do (woodworking and casings) and I can get a framer with compressor later if needed (beware basement, your time is drawing near). The batteries are fully charged in less than an hour unless they are totally drained, then 1.5 hours. I had no trouble putting a 2" brad into solid ash anywhere from 1/4" proud of the surface to countersunk about 1/8".

Now when I see Norm say, "and I'll fasten this with a few brads to hold it 'till the glue dries", I can say, "hey, I can do that!"

I highly recommend this product, they put together a good package.

This tool manufactured by Senco is not good quilty and definitly not for professional applications. We have purchased a lot of senco pnumatic products in the past with very good results. This tool had poor results right away in dense woods. After some use the results where sparatic: 1) intrermitent falure to fire, 2) Unpredictable depth in the same piece of material & Jambing often. Both of our Senco AF25 Air free's currently sit out of service.

We have since Purchased sevral Dewalt 18V nailers ( Dewalt has 18V Vs 12V for the Senco ) the Dewalt also has a production seting that allows rapid fire like an air nailer; the Senco on the other hand does not have this feature.

I'm sorry to say, I reccamend a pass on this Senco product.

Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner

• 5,000 BTU cooling capacity
• Cools room sizes up to 150 sq. ft.
• 2-way air direction control
• Anti-bacterial mesh filter type, side slide-out filter access
• Rotary controls

I spent quite a bit of time researching A/C before purchasing. We live in Oregon and it doesn't get too hot but there's a month or two in the summer where the heat and humidity get oppressive in the house. I wanted an inexpensive, small, window A/C to increase the comfort. I wanted something small enough that I can store it the other 10 months.

So, after much research I ordered this model. I was going to get the 6K BTU model with the electronic controls but I figured I would get something super cheap and if it didn't work I could use it as a single room cooler. Shipped free which makes this a pretty good deal. Arrived in about a week.

Installation was easy, following the instructions in the manual. I did have to install and remove the A/C about 3 times to get all the sealing right. In the box there's a lot of different thicknesses of foam and foam tape. There is no specific instructions about what to do with this, except the stuff for the top gap of the upper sash. So, I experimented with various combos to get a good seal. We have recent vinyl windows with screens but no storms so the unit basically dropped right in. However, there are some gaps around the bottom in this configuration. I stuffed these with the thickest foam that came with the unit. This did the trick but didn't look too great. Luckly I ordered extra foam tape as another reviewer recommended, and I used small pieces of that to caulk around it inside and outside, leaving the big foam inside. It actually looks pretty neat and professional. $4 well spent ;)

Anyway, the unit is installed in our main living room. We are in a 1940's box bungalow so this room is about half of the width and length of the house. The bedrooms and kitchen connect to it. With it on HI cool/Max(7) the entire house has been very cold and huge amounts of water have been pulled out. We will see how it performs in the upcoming week of 95+ temps. We keep a few $10 box fans around to circulate air so I can move the cold air around.

One thing is that I have heard mentioned on a few other models is that the fan catches water in the pan and spits it around. This is a feature and not a bug ;). The unit is designed to pitch backward slightly when properly mounted. Moisture removed from the room collects at the bottom. The fan blade is coated in rubber and it's designed to suck water up and spray it on the evaporator coils. This facilitates some precooling of the outside air. It drastically increases efficiency. I would not drill drain holes, as other people have mentioned.

Summary:

$100, and my house is cold AND quiet. You can't say much more. If it's not enough for the hottest day I might get one more and move them to the bedrooms. It's very quiet on low but I like white noise.. I hope it lasts, even if it doesn't I'd gladly pay another $100 in 2 years.

Buy Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Now

I got it hoping it would keep my apartment cool-ER. I expected it to keep it comfortable, not cold. I also had a bit of a problem with size. The only window that opens in my house is a vertical sliding window, which Air Conditioners I can afford, aren't made for.

Once I received it, I started to assemble and install. Originally I was going to leave the extensions off, since my window was only 18 inches wide, but after I got it and thought about it more, I realized they could still help keep it supported. So I put them on. They are about an inch inside the window, to help it from falling out. Also, I originally hoped to buy some wood and put that above it, but once I saw how sturdy it was with just the extensions, I put cardboard above it and plastic taped around the edges with duct tape. Very red neck, I know. It's sealed with the help of some other bits that came with it to help seal it.

I installed it a little over 12 hours ago and my home is cold. I live in a house above a garage. Just a large living room, average bathroom and small bedroom. It's 621 SQ Feet.(assuming I did the math correctly. 23 x 27 feet.) This is total, but there are 3 separate rooms here. (Also, I have a low ceiling, only 6.5 Feet.) I placed it in my only opening window in the living room and it keeps the bathroom cold which is closest, and my bedroom pretty cold too, which is farthest. A lot larger than advertised for. I didn't care, I needed a little cooler than I had. Before, it was hotter inside than it was outside. I have it on high, but will consider turning it down, which I never thought I would do. I like the cold. It's THAT cold.

For $110, I got an amazing air conditioner that perform WAY better than expected/advertised and it got here exceptionally fast too. It arrived 4 days after I ordered it with standard shipping and handling. I am a very happy costumer.

Read Best Reviews of Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Here

I have run this all summer, purchasing it about five months ago.

It has been a relatively mild summer with only 12 days over 100 degrees.

Pros -

Easy to Install

Excellent Size for Small Windows

Fairly Quite to run (would not bother me if I slept in my office)

Keeps my office 11x14 frigidly cold when set on max (temp 7 of 7)

..(takes about 8 hours to cool down a hot room with the door closed)

..(I keep it on 5 out of 7 on the temp gauge, that even gets a little cold at times)

Cons -

The Directional Air Flow vents are poor

Not much difference between the High Cold/Fan settings and Low Cool/Fan settings

When rain blows against the unit the accordion extensions collect a little water along the bottom

I am considering getting two or three more for my house next summer.

I had one of my Frigidaire window units at the house die this year, it was twelve years old.

**UPDATE**

September 22, 2011

One year later to the date. No this was not planned. This little unit lasted through another summer, and this one was not so mild. I lost count of the days over 100 degrees. I did not buy any more for my house, as I moved into a new home with central air. This unit does however continue to cool my office as it was purchased for.

It was stored all winter in the utility closet off my office (i.e. indoors, warm, and dry). It was washed down with a power washer before being re-installed in the window this year.

Pros -

Excellent Size for Small Windows (I am still amazed I found a unit that fit)

Fairly Quite to run (I don't notice it running anymore, and no customers have complained)

It can still freeze me and my customers out when set on max temp (7)

..(I timed it again and it still takes about 8 hours to cool down a 11x14 hot room)

Cons -

The Directional Airflow vents are very poor (they are basically useless)

Still not much difference between the High and Low settings

..(I fixed the rain issue above by using plexiglass this year)

Rust has started to form on the outside grill and corners where the condensation drops

For those of you wondering, the reduced star is because of the directional airflow issues. Another review mentioned the styrofoam can be seen, and was probably used to fill the gaps. This is true but after two years it still seems to be in good shape. It also appears to be fairly thick. Some other items I tested this year...

Room size 11x14 (left on this setting for 24 hours before temperature was measured)

Average outside temperature during this week of tests was 98 degrees.

Setting Cool/High 7 brought the room to 58 degrees, outside temperature 98

Setting Cool/High 5 brought the room to 63 degrees, outside temperature 96

Setting Cool/High 3 brought the room to 74 degrees, outside temperature 100

Setting Cool/High 1 brought the room to 89 degrees, outside temperature 99

All temperatures were read at 4pm.

**Please note this was my unit's performance. Yours may differ.

Yesterday it was put back in storage until next year. I considered getting a sound level meter or loudness level meter to measure the actual noise my unit puts out, but I have not got around to that yet. Maybe next year.

Want Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Discount?

If you're like me, when you've been out shopping, say Walmart, Sears, or some of the other places you might have noticed, especially in the hot summer time, these smaller cheaper A/C window units on store shelves. For the most part, they've looked cheap and I've never seriously considered buying one as my standards are a bit higher.

However, here we are, summer 2010, NE Kansas and the temps are rough, especially in my back room. I had to do something.

This is where this little gem fits it.

Spending a bit of time doing some research on getting the right Window A/C unit for my room at a price point I could afford, brought me here. In short, I have to more than agree to everyone's positive review on this item.

This thing screams quality. The boxing / packaging is great. The fit and finish of the unit is perfect. Some very skilled design and workmanship went into this A/C. You could honestly not ask or expect any better. People are saying this thing cools down 2 or 3 rooms with ease. My application will just be one med size bedroom. So far, I have it set to low cool on 3 or 4 and the room is night and day different in terms of comfort.

I paid $126 for this unit off eBay. I was saddened to find it for $100 shipped elsewhere which, they have in stock. Do a google search for "Conn's Frigidaire FRA052XT7" and the product will pop right up for you. It's $89 there with $10 dollars 3 5 day shipping.

For the money, the weight of the unit, the fit and finish, name brand, etc. This is about the best investment I've made in sometime. Hats off to the folks at Frigidaire. I mean really, I just cannot put this fantastic product / experience into the words they deserve.

I wish I had Bill Gates money, the first thing I would do would be to order 500,000 of these units, sit up a Midwest distribution center with offices and coordinate with local and national cities that account for some of the highest heat related deaths and get these cherished older generations who we owe everything to, these people with out means who are dieing of heat and get them this A/C. Box fans do not cut it.

Save 21% Off

I live in a basement apartment and struggled to find an AC for my tiny windows the opening is only 16.5 inches wide and 18 inches tall. No window air conditioner would fit that space. I had an 8,000 BTU portable A/C but that thing was just very inefficient drawing in hot air from the outside as most portable units do because they constantly exhaust hot air and new air has to come from somewhere. Long story short, I stumbled upon this little unit and found out it was only 16 inches wide (sans the side panels). It fit my tiny window perfectly. Most importantly, it also does not protrude very far to the outside, and important consideration when people walk past your window.

Mounting this unit was easy. It is so light that you don't have to struggle with it like most air conditioners. You should not get a hernia lugging this unit. It also puts very little strain on the window frame and does not need any additional brackets. To my surprise, the unit also came with tons of mounting hardware including insulation often not included with other units. There was even a piece of foam to put in between the two window panes to insulate the gap in between two open windows. Nice.

I noticed a lot of people out here mount the unit in an angled position. You do not have to go out of your way to do that. If you mount it right, it angles slightly to the outside by itself. The reason for this is so that the water that accumulates in the unit flows outside and not inside. You don't have to tilt the unit outward as much as many of the pictures on here show.

What the unit lacks in size it does not lack in output. At 5,000 BTU, I was not expecting much, but this unit outperformed the 8,000 BTU portable unit easily, drawing 1/3 less electricity. It cools the entire 400sqft apartment with the help of a fan. (a well-insulated apartment, don't expect it to cool 450sqft in a poorly insulated or sun-exposed building) It is one of the quieter units out there, producing a constant hum rather than sounding like a freight train like some units. The most noise comes from the fan. The compressor is barely noticeable. It is a no frills unit with manual controls but they work pretty well. It maintains the room temperature better than many electronic units. Set to level 6, it cools the room to a comfortable 73 degrees, level 7 cools to about 69 degrees. it cycles on and off nicely and quietly. Finally, the build quality seems rather good nothing rattles or vibrates.

Overall, this is probably the best little AC out there you can get. If space is a problem and you were considering a wasteful portable unit, give this little guy a try.

The Souce OA-BRACKET10 Vehicle Bracket for The Source High Performance Air System

• Holds 10 # Tanks
• Mounts Easily to Vehicle Floors
• Aluminum Alloy Construction
• Hammer Coated Finish
• Can be used in conjunction with Roll Bar Mounting Clamps

This tank bracket will hold your tank securely, but it is poorly designed with little thought on how it will be used in many different vehicles and applications.

1st. The bracket securing strap uses a lever/fulcrum method to make sure the strap holds the tank very very tightly. And it does work, you can off road with this bracket and be certain your tank will not move. However, the strap itself needs a ton of room to work properly therefore limiting your mounting options to very large areas only. Basically you need the width of the bracket times 2 to mount and be able to use it. you can mount it horizontally, but the strap must be able to open upwards.. so you have only one option to mount it.. bracket lever upwards. If you are trying to mount in a tight spot pick another bracket.

2nd. NO THEFT PREVENTION FOR YOUR EXPENSIVE TANK.... The co2 tanks cost anywhere from 200.00-500.00 bucks. And the bracket itself is 45 bucks. Are you telling me that they never thought about theft prevention? They need to add a small hoop for a padlock or something so someone doesn't just walk up to your truck or jeep and walk away with your tank in 5 seconds flat. The bracket bolts into your truck so it it safe... but the tank is free for anyone to steal.

This bracket is solid as heck, and if you can find a place to mount it and pay a welder 40 bucks to add a bracket then you will like it. otherwise keep on looking.

Buy The Souce OA-BRACKET10 Vehicle Bracket for The Source High Performance Air System Now

The first reviewer was pretty accurate with his review, but there are updates I would add.

1) I was frustrated with the lever strap for about 15 minutes, because I don't have room to fully open the lever. This seemed like an impossible hurdle. However, I realized that the strap did not need to open to remove the tank. You simply release the lever, which loosens the strap, then pull the tank up and out. This method is easier than fully opening the strap each time, then having to fully close it each time. There is little need to remove the tank for my purpose, except to have it refilled. I use it to air up my tires after running in the soft sand. The hose is long enough to reach all four tires. Even still, I can easily remove the tank if needed.

2) The locking problem is an issue. There is a very small hole that could take a pull pin to keep the strap from opening, but not big enough to accept a padlock. It looks like there is a way to lock it down with something but I haven't really tried yet. I plan to run a 20mm cable lock through the carry handle and around my chase rack tubing. Padlock's are as safe as zip ties when it comes to anyone really wanting your stuff. It would take someone 6 seconds to cut the lock and take the tank.

The Power Tank mount looks much better built, but then you get what you pay for... Get a Power Tank if you want a Power Tank mount. It also comes with a loop for a padlock. It only costs about $200 more!