Showing posts with label husky air compressor belt. Show all posts
Showing posts with label husky air compressor belt. Show all posts

Thursday, September 25, 2014

Gutter Getter 00652 Gutter Care and Cleaning Kit

Gutter Getter 00652 Gutter Care and Cleaning KitI had used part of this product before and could not find it locally. It is a specific tool for the job and it is very useful. This product came with a gutter rake which I probably would not have wanted but now I am glad it was included with the two downspout filter which I also would not have purchased but I am also glad to have. In fact I might buy another filter as I have three downspouts. The Gutter Getter itself is a nice tool and it helps a lot when you have a lot of gutters to clean. The rake is a nice tool that also aides in cleaning.

In 2002 I fell off a ladder while cleaning gutters. My hands were slippery with the muck from the gutters. I was very lucky that I only broke a finger in the fall and not something more severe. The Gutter Getter and the gutter rake might have prevented this fall. This is a good product and the extra parts I am now convinced to be worth the extra money. I would definitely recommend this to others. Also I could not find it locally so getting it on Amazon was a big plus.

Bought this for my husband who has to climb 2 stories on a ladder to clean the gutters. He doesn't have to move the ladder as many times. He can reach quite far with the pole. I am happy because he gets the job done in half the time. I am very nervous when he is on the ladder.

Buy Gutter Getter 00652 Gutter Care and Cleaning Kit Now

It's cheap, but does extend your reach a bit. So a few less trips up and down the ladder, which is great. The gutter downspout covers are keeping the leaves out of the downspouts, so pretty neat extra deal.

Read Best Reviews of Gutter Getter 00652 Gutter Care and Cleaning Kit Here

I have very narrow gutters, which makes cleaning them very difficult on my hands. My hands always get very scraped up and takes a lot of hard work to dig out handful by handful into a bucket with the help of a garden spade. However, this completely solved my hands getting scraped up, and significantly minimized the hard work and time involved. I am very happy with this. It isn't built to last forever, but for the price, it saved me a lot of time and no scraping my hands.

The four piece extension scraper is quite long and saves you a lot of time moving the ladder. I could just pull the thick muddy leaves towards me. I really didn't have to move my ladder at all for my ~12 foot sections. My only difficulty wasn't related to this, which was having to get around a tree that was in the way of ladder placement. It easily scrapes thick leaves, mud, and water in my narrow gutters. You only have to work a little bit getting above and under the reinforcement bars that hold your gutter out at even intervals. I just pulled from the top, then fit under and pulled the rest. Also, I scraped a few feet at a time working outword instead of trying to pull everything at once from the furthest reach towards me.

The scoop is absolutely excellent for my narrow gutters. It is plastic and flexible and can push into different widths. However, you cannot easily just scoop. What I did was use this scoop as a pan, scoop it in at an angle, then use a garden spade to pull the thick muddy leaves into the scoop and pack it in, and then in just a few quick scoops into a bucket it was done. It might not hold up durably forever, but the flexibility is perfect and the only thing I could imagine could fit into my narrow gutters in place of my hands.

I still used a gutter cleaner hose attachment, which is not part of this set, to wash out the mud & debris. It could have been left in perhaps, but it is easy to wash out with a U-shaped hose attachment two sweek along towards the down spout. The rest just runs down the down spout. I am very glad I did because my down spout was clogged at its first elbow. I just used a garden dirt poker to try to dig it out and it instantly poked free with proding. I then finished flushing it.

I easily inserted one of the down spout drain grate over provided in this set. So hopefully it will not get clogged again. There are two plastic tabs that you turn down and insert into the opening. With the narrow hole for my down spout, it squeeses the grate to fit snugly over the hole. I suspect those little tabs will crack off eventually in the hot summer heat. So I don't know how long it will last in place. It will also have to be removed for the next gutter cleaning because the scraper cannot just scrape over it with it in the way.

Want Gutter Getter 00652 Gutter Care and Cleaning Kit Discount?

This is a specialized product for cleaning leaves / muck out of your roof gutters. It does this very well, and for that alone is worth the price. I was looking for something like this and did not find many other good alternatives either on Amazon or in brick and mortar stores.

The product consists of a rake (which you attach the extension handles to) which is used to pull debris towards you, and a scoop which fits perfectly in the gutter to pull the muck out. The reach allows you to cover a large section of the gutter at each position of the ladder. Where some gloves and old clothes and keep a bag near your ladder to scoop the muck into. Keep some rags nearby too to wipe your ladder and hands periodically to prevent slipping and falling.

The gutter getter is much better than using a shovel or some other tool you'll save time, prevent damaging your gutters (with a metal shovel or some other improvised tool), and take fewer trips up and down the ladder a convenience and safety factor. I would highly recommend purchasing this product if you intend to clean your own gutters.

I have not tried the downspout filters, but other reviewers have noted that they work well.

Friday, July 11, 2014

Arrow Pneumatic (ARRPC7612XXL) PneuMasterAir 5 Stage Desiccant Filter/Dryer

Arrow Pneumatic PneuMasterAir 5 Stage Desiccant Filter/Dryer
  • Sold Individually

I bought this item because I prepare fossils using compressed air and abrasives, and I need dry, clean air for the abrasive to flow through a very small nozzle without clogging up the nozzle. This 5 stage filter/dryer does everything I need it to do and more.

I would recommend this item to everyone, but it is heavy since it is made out of metal instead of plastic. Also, it is a bit awkward to remove the desiccant bowl to fill, empty, and refill. But, I love it anyway.

Buy Arrow Pneumatic (ARRPC7612XXL) PneuMasterAir 5 Stage Desiccant Filter/Dryer Now

Excellent qualiy at a fair price. Not a fancy name but a quality product and Made in America is a win for the home team.

Friday, July 4, 2014

Kraft Tool Co. PC500 Pattern Pistol with Compressor

Kraft Tool Co. PC500 Pattern Pistol with Compressor
  • Versatile pattern pistol to spray and apply a variety of texture coatings
  • Air and material combine at the gun to produce desired texture
  • 1 HP capacitor-start electric motor with manual re-set thermal overload protector
  • Delivers 6.2 CFM free air at 25 PSI
  • Includes 1/8-inch and 3/32-inch valve tips

My husband is a paint contractor and we ordered three of this machines, there are perfect to apply texture to ceilings and walls, in very short time, and the compressor works continuous all day long!!! We are very pleasant with this acquisition!!! We hardly recommend it!!! 100 points!!!!!!!!

Buy Kraft Tool Co. PC500 Pattern Pistol with Compressor Now

I love the compressor, but when I received it from UPS it had tipped over and broke the air gauge. Neither Amazon or UPS seem to want to replace the gauge for me even though it arrived like that. I will buy the gauge myself, and never buy from Amazon again. I also will use Fedex from now on!!!!!

Friday, May 9, 2014

Hitachi 881510 1/4" Mini Regulator made by Rol Air Fits EC12, EC129, EC10SC

Hitachi 881510 1/4' Mini Regulator made by Rol Air Fits EC12, EC129, EC10SC
  • Hitach Replacement Part
  • 881510
  • REGULATOR EC12 EC129 EC10SC
  • Hitachi Power Tools

I had to modify the case a bit but it works well other than that. I'm not noticing any pressure spikes.

Buy Hitachi 881510 1/4" Mini Regulator made by Rol Air Fits EC12, EC129, EC10SC Now

fit perfectly. does the job. would recommend this to any one who needs it. can now use my air compessor

Thursday, April 24, 2014

Amico 2 Pcs 1/2" PT Thread Air Intake Filter Muffler for Compressor

Amico 2 Pcs 1/2' PT Thread Air Intake Filter Muffler for Compressor
  • Product Name : Air Compressor Filter Silencer;Material : Plastic
  • Color : Black;Overall Size (Approx. ) : 67 x 53mm / 2.6'' x 2.1'' (D*H)
  • Thread Diameter : 1/2" PT(19.8mm)
  • Weight : 53g
  • Package Content : 2 x Air Compressor Filter Silencer

When your air compressor intake filter is broken or gone, grit can enter the reed valves of your compressor, and if you're lucky, you'll get 25 psi out of it instead of 125 psi. When you clean up the valves, screw in this new filter if you have 1/2" NPT female thread on the intake of your compressor and you'll be ready to go.

Friday, January 10, 2014

9191 BLACK MECHANICS TOOL BAG 11 X 7 X 6

9191 BLACK MECHANICS TOOL BAG 11 X 7 X 6
  • cotton
  • G.I. STYLE
  • 11" x 7" x 6"
  • HW COTTON CANVAS

*Pros: a lot of storage for the size, excellent construction and material, looks good.

*Cons: none that I can think of

*Bottom line: I would recommend this bag to anyone needing a small tool bag for storage.

Comments: This bag is excellent! It is simple and tough (made from canvas) and has a lot of storage for a small bag. Its just about the size of a shoe box, has nice flexibility but a rigid bottom to maintain its shape. It folds down to be small if you need it to.

It has 4 pockets sewn into each side of the inside about the size to hold a screwdriver or socket wrench. On the outside there are 3 pockets on each side covered by a flap. One large one in the center and two smaller pockets where you see the snaps in the photo. All in all, a lot of storage for this small bag! A major plus to this material is that it does NOT fold over and fall into itself cutting off use of the pockets. They are open and accessible when you have your hands full and need to get in them. There's a reason why the military has been using canvas bags for decades, they work and they last.

I bought this bag because I needed somewhere to store my Craftsman 12v impact gun, 12v drill/driver, the hex bit set, and the small battery that goes with it. All of these components fit and there's room for another bit set when I add to my collection.

Buy 9191 BLACK MECHANICS TOOL BAG 11 X 7 X 6 Now

Although these bags make great tool bags for travel and such, they are also great kit bags for your travel toiletries, like shaving supplies, toothpaste, deoderant, and other such stuff you carry when traveling. It's a good bit more roomy than most kit bags, so you won't likely over fill it.

Read Best Reviews of 9191 BLACK MECHANICS TOOL BAG 11 X 7 X 6 Here

I bought this bag to store and carry my beading tools and supplies. It is just the right size and strength for these purposes.

The bag is of rugged construction, made out of sturdy canvas, with a rigid bottom that does not bend. Consequently, the bag holds its shape well and can carry a fairly heavy load. It is not, however, so stiff that it can not be compacted to fit into a suitcase, if need be.

The zipper is big and sturdy and looks like it will last as long as the bag does. The double handles are just the right size to carry the bag.

I like the side pockets for organizing, and affording quick access to, small items.

I highly recommend this bag to anybody who wants to store and carry tools or other items.

Sally Necheles

Want 9191 BLACK MECHANICS TOOL BAG 11 X 7 X 6 Discount?

I bought this to store my Viair tire air compressor in my truck with. It fits perfectly and is quite attractive and functional, even better quality than I originally expected. It has a hard protective bottom.

This makes a great in-trunk bag to store tools and other small items like flares.

I mess around with cars a lot and I help my co-workers with their cars whenever I can. Many times I have tools rolling and tossing around in the hatch/trunk of my car. Finally, I decided to get a mechanics bag. My brother have 1 in OD green for his ammo when we go to the shooting range so I know 1st hand what I'm getting. I purchased mine in black and fitted few of my most used tools in a most compact form in it. I included a product picture with my tools.

Sunday, December 22, 2013

Winterize Sprinkler System Blow Out Adapter: Air Compressor to National Pipe Threads (NPT) Set with

Winterize Sprinkler System Blow Out Adapter: Air Compressor to National Pipe Threads Set with Shut Off Valve - Contains all common sizes!
  • Adaptor to winterize sprinkler systems. Includes printed instructions.
  • Includes most common pipe thread combinations! Avoid multiple trips to the hardware stores.
  • Pressure rating: 250 psi with 4:1 safety factor.
  • 100% outdoor rated.Impervious to water and oil.
  • All metal parts are brass. Flexible hose is 3/8" Goodyear Insta-Grip.

I was motivated to buy this adapter after noticing that the last two years, the sprinkler guy that charges me $60 to blow out my sprinklers always seemed to find a broken sprinkler head when blowing out the system even though I never noticed any of them broken all year.

He would unscrew them and take them with him pretty much trying to force me to call him in the spring to turn the system back on (which I never do as it's just a matter of turning the water back on) and then charging me to replace the sprinkler heads that he took with him.

I recently bought the Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit and decided that since I now have an air compressor, I may as well try to blow out the sprinkler system myself.

I usually try to buy my products directly from Amazon due to their speedy shipping, this item was only available via the manufacturer, but I'm happy to report they shipped it priority mail and it got to me in about 2 days.

Now to the meat and potatos!

Upon receiving this kit, I shut off the water to my sprinkler system, went out to the water line that comes out of the house and down to the sprinkler box. I unscrewed the cap on the top of the pipe and figured out which of the adapters in the kit was the right size to screw into the pipe. I found it and noticed it needed a 2nd adapter to match up to the main hose.

I took the teflon tape that came with the kit (awesome!) taped up the threads on the fittings being mindful not to tape the first thread on any of them (you don't want any tape coming loose and getting blown into your plumbing) and connected it all up to the sprinkler water pipe.

I connected it to my air compressor air line with the quick connect it comes with and was in business.

Check out the pictures I added to the product pictures on this item to see the final setup.

Bottom line, it worked like a champ.

The only part that sucked was that my compressor tank is just a bit small for this job so I had to empty the whole air tank into the sprinkler system, shut off the air flow (made sure easy by the shut off valve built into this unit), and let the compressor refill the tank a couple of times per sprinkler zone.

I know a lot of the videos on youtube show people opening up their sprinkler box and turning the solenoid valves to switch between zones. Since I have the IrrigationCaddy sprinkler controller that can be controlled by my iphone, I just turned it on as if I was running the sprinklers then switched through each zone one at a time until they were all blown out. Once I was done, I shut the system off and am done until spring.

Bottom line, this connector works wonderfully, comes with a million adapters so should fit just about any water connection and was cheap.

The fact that it just saved me $60 that it would have cost me to pay the sprinkler guy plus the extra money the guy would have charged me to replace the supposedly broken sprinkler heads in the spring means this thing just paid for itself and saved me at least $30 on top of its price for one use.

This kit is high quality and I'd expect it to work for years which means it's going to keep on saving me money year after year.

I would buy it again and would recommend it to friends and family.

Buy Winterize Sprinkler System Blow Out Adapter: Air Compressor to National Pipe Threads (NPT) Set with Now

This was awesome! I was going to have to go to the hardware store and figure out all the connectors and parts I would need. This solved all that hassle and it worked like a champ! Saved me so much time just connected the part I needed and BAM done! Thanks!

Thursday, November 28, 2013

10 Galllon Air Sand Blaster with Ceramic Tips

10 Galllon Air Sand Blaster with Ceramic Tips
  • 10 Gallo Tank Capacity
  • Holds 40 lbs. of Media
  • Easy Rolling Wheels
  • Includes 4 pc Nozzle Set
  • Protective Hood and Fill Funnel

I've been tinkering with this product for the last few hours as I was planning on getting work done on some car parts. It has had quite a few air-flow flaws and media (a fine grain at that) keeps getting clogged in various parts. Most of the clogs seem to occur around the bottom media control valve. I've removed the valve and just straight piped it to try and get a proper flow but I've given up for now.

I would save your money for something with a better design.

Cons: Horrible media flow, clogs around media control valve, clogs around material tips.

Pros: Blow-off valve worked.

Buy 10 Galllon Air Sand Blaster with Ceramic Tips Now

This is the same blaster sold by a dozen different brands. I bought my locally and assembled it. Read the reviews all over the web for all the different brands and you can get some great tips on how to make it work best. It's entertaining to see different brands have different results or different customers have different expectations based on the different prices they pay. Different retailers trying to submarine each other? Dunno.

A couple quick comments. Just bought it yesterday. Looks good. I like the build quality. Looking for the design I think I'll add a generic manual choke cable to move the lower valve (19B). Everyne that says they had success with it says that you really only need ot open the 19B valve halfway and that it only works well with 80 grit or finer blasting media.

Means I'll only have to drill a small hole in the valve handle and clamp the choke knob to the sandblaster handle.

For the play sand users I used to borrow a big sandblaster from a fellow permanently on disability who had used silica sand in his blaster for a while without enough protection for his lungs. He reported that it felt like he was permanently sick and had been for several years with no expectation of ever being well again. He was in his thirties. Read up and see what you think about it. Wikipedia has a great article on silicosis.I'm using this blaster with a 60 gallon Campbell-Hausfeld ~5HP air compressor. It's a single stage compressor. It does a fair job of keeping up with the blaster for a while but eventually I do have to stop and wait for it to catch up. If it'll blast at 80 psi (don't know yet), then there is less volume of air being consumed so the compressor might keep up longer. I have not had time to experiment that much yet.

Have always used tarps and a small salad colander for sifting my sand/blasting media for reuse.

The compressor pump itself is not big enough to stay ahead of the sand blaster for too long. Being that this is only a hobby rig, I can deal with it. If I was making a living with it I'd have bigger equipment.

The finer 80-grit garnet that one reviewer mentioned works best. Anything more coarse leads to clogging. I think high humidity will make a huge difference (problem) later in the summer too. Make sure your compressor has an inline dryer too. The sandblaster has one as well of course but having them in both places is worthwhile.

For a helmet I use an old welding helmet with a clear glass window that has a scrap of leather taped/glued to it to keep the grit out of my shirt. Either way its a dirty job but easier and faster than doing it by hand.

Read Best Reviews of 10 Galllon Air Sand Blaster with Ceramic Tips Here

I can't comment on the effectiveness as I haven't used it yet. It is cheaply made and I wouldn't spend over $75 on it.