Ingersoll-Rand 212-TK2 3/8-Inch Impact Wrench Tune-Up Kit

• 3/8" Impact Tune-up Kit for use with 212

for a complete repair kit with everything you need this is the kit,i had a seal problem on my impact,most economical way to fix was this kit,used what i found was needed and kept the rest of the parts for possible later needs,all factory parts.highly recommend

Save 50% Off

New Air Pressure Gauge for air compressor WOG water oil gas 2" Dial Center Back Mount 1/4" npt 0-200

• 2" Dial Center Back Mount 1/4" NPT 0-200 psi stainless steel ring
• FREE SHIPPING TO CONTINENTAL US

This is a much higher quality gauge than the one it replaces. This gauge has zero sticktion. The gauge I replaced was on a Commercial Dewalt air compressor, regulator side.

Save 56% Off

Rol-Air Air Compressor 2HP 4.3 GAL Elec #FC2002

• CFM @ 100 PSI: 4.0
• Power: 2 HP
• RPM: 3400
• Tank Size: 4.3

I have had this unit for about a month now and I'm very happy with my purchase. I have used/owned Rol-air products in the past and have always found them to be very well made and reliable. This unit has proven to be no exception. The pump is quick to fill the tanks. Unlike cheaper units the motor is rated for continuous duty and Rol-air uses copper tubing to better dissipate heat. My unit was purchased through Acme Tools it arrived with a broken pressure gauge for the tank pressure (no affect on operation so I still used the unit). I called them and was very happy with the prompt customer service. The manufacturer shipped a new gauge and it arrived about a week later. Replacement was simple. One item I will replace is the tank drain valves for some reason Rol-air continues to use the cheap brass screw type valves. Do yourself a favor and swap them out for a stainless steel ball valve assembly, faster to drain the tanks and they never freeze up. I'd give it 5 stars if it came with better drain valves it annoys me when manufacturers build a fantastic product but go cheap on small items like gauges and valves I'd pay $50 more for the same unit if it came with better gauges and the aforementioned valves.

Buy Rol-Air Air Compressor 2HP 4.3 GAL Elec #FC2002 Now

I think Rolair makes the best compressors on the market. I've had this unit for about 18 months now and it has performed flawlessly. When remodeling a house with a few people I put a manifold on it so we could run a floor nailer, 15 gauge nailer, and a framer all at the same time. This did not strain the compressor at all; it kept up just fine. It is the quietest compressor I have ever owned, and probably one of the quietest I have ever used. Rolair makes a good product and I think I am going to purchase one of their larger compressors for my garage. I was also considering the IR twin-stack, but I read about some quality control problems IR was having with their compressors and decided against it. No regrets with the Rolair. I think I have seen this exact same compressor at Mendard's branded as a Masterforce. FYI...Masterforce also places their name on Stabila levels.

Read Best Reviews of Rol-Air Air Compressor 2HP 4.3 GAL Elec #FC2002 Here

I bought this thing to replace an old twin tank 1 1/2 hp emglo . It wuold not sink nails in Southern pine after a few shots . It pressures up to 125 psi and recycles at 95 psi .I tried to change the factory settings and screwed it up . My fault . If this thing is suppose to be so heavy duty why can not it pressure up to 150 and recycle at 120 from the factory like the light,oil free 6 gallon pancake Porta Cable compressor that cost $159 ?If it only last a year under every day use ( the Porta Cable ) it's worth it to me . It's half as light it seems , runs off longer cords and sinks framing nails > If the rol air last 10 years what good is it if it's heavy won't keep up with light framing and needs to be run on short cords . If you have this compressor and want to chance the factory settings for psi be carefull and turn the small set screw just a little clockwise at a time . Leave the larger black set screw alone. I called Rol air and this is wat i was told. The small set screw raises the top psi and also raises the recycle psi.

Any way i am now a happy owner of a 6 gallon Porta Cable light weight oil free 150psi compressor. Another guy at work has one that is a few years old and it performs and that's why i bought it.

Want Rol-Air Air Compressor 2HP 4.3 GAL Elec #FC2002 Discount?

I have been looking for a compressor that in particular, wouldn't loose pressure over time. I had tried several other brands but all would have a slow leak causing the pumps to recharge often. Although the Rol-Air is a little more expensive, it is far supperior to the Husky brand I tried from Home Depot.

Excellent quality, much quieter and doesn't pop the breakers in the cold weather. I have watched the pressure gauge for more than 10 days and the needle hasn't budged.

Love the compressor.

Save 32% Off

Only used about a month so far but this is great portable compressor. Its not as quiet as some have said, but for a compressor of this size it is one of the more quiet ones I have had. Great product.

Professional Woodworker 9528 6.5 HP Gas Powered Air Compressor

• 9 gallon air tank; 6.5 HP OHV Energin engine
• 9.1 @ 90 PSI and 11.1 @ 40 PSI: Maximum PSI 125
• solid cast iron cylinder/durable steel air intake filter
• 2 regulated, factory installed air couplers to easily support two users
• High performance OHV engine with 10 year "Field Excellence" Record

It might all be made in China, but so far it has met all my needs.

I read another review complaining about the cfm being wrong, it's 9.1 at 115psi.

He could be right?

Buy Professional Woodworker 9528 6.5 HP Gas Powered Air Compressor Now

this thing is not what they say it is 9.1 CFM@90 AMAZON says this is a no return item do not buy this if you are as upset as me get ahold of me so we can file against Amazon

Ampro AR2654 3/8-Inch Air Filter, Regulator

• Combination of filter and regulator in one unit to protect air tool from moisture, rust and friction
• Filter keeps water, dirt and other particles from entering air line
• Regulator controls air pressure from air compressor
• Improves spray painting performance

Not what I needed. This is fora full size air compressor not air brush compressor. I am keeping it becase I may need it in the future. Looks like a solid piece of equipment.

Stanley Bostitch PRO-3850 Prozhoze 3/8 Inch x 50 Feet

• 3/8" x 50' Polyurethane
• Flexible from 180° to -40° F
• Ribbed design for longer life and maximum hose lubricity for maneuverability around the job site
• 1/4" MPT fittings for maximum compatibility
• Snap fit strain relief provides flexible reinforcement

Not a great deal to say about this apart from polyeurethane hose seems to be the way to go and 3/8" dis gives marginally more air volume over 1/4" (38ci to be precise). The low temp flexibility is very impressive. Would definitely buy again to run multiple tools

Buy Stanley Bostitch PRO-3850 Prozhoze 3/8 Inch x 50 Feet Now

It does not specify at all in the description but this hose is made in the USA. There are a number of Polyurethane hoses out there for about the same cost but many are made overseas. I always look for quality products made domestically. Now for the product. It is indeed lightweight. I doubt it would be noticable if you were on a scaffold and had the entire 50' of hose hanging down. It is simply that light. For those of you who are using rubber hoses, the difference is dramatic. The fact that it can be repaired on a job site in a flash is just a bonus. They sell the repair kits at Amazon too and if you are like me and have trouble finding Bostitch products locally, I suggest buying a couple kits to have on hand and hope you don't need to use them. The hose ends are reinforced and are decent quality. Although the hose is yellow, it is translucent and you can easily see through and see if there is condensate or debris in the line which could cause damage down the line. I just may buy a second hose for more reach or get a Goodyear rubber hose (GoodYear 045 3/8-Inch x 50 Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends)

for the 1st 50' and save a few $. It is on Amazon for $19.99 and is also made in the USA. I would rather have two 50' hoses than a 100' line as there are certainly times when I would not need a 100' and would only use one hose.

Read Best Reviews of Stanley Bostitch PRO-3850 Prozhoze 3/8 Inch x 50 Feet Here

After I ordered this I realized no where was it mentioned to what psi rating it was certified to be... I needed at least 250 psi hose so I tried to cancel the order but it was too late as it was shipped. So I figured I would return it upon arrival (luv amazon returns, sooo easy). Well it showed up promptly and as I looked at it closely I saw 300 psi imprinted on the hose every 12-18 inches. The packaging had no rating what so ever however. Overall I am SUPER pleased with this hose and price. Light weight & flexible no matter the temp, AWESOME!!

Want Stanley Bostitch PRO-3850 Prozhoze 3/8 Inch x 50 Feet Discount?

An American product that is what it says it is. Best hose on the market. I bought it before I renovated my house. I've now put on the second floor and completed the whole house and this hose is still like new. It's been stepped on and dragged around everywhere.

Save 27% Off

Doesn't leave marks, well made, easy to use. I'll buy more as I need to replace some older rubber air hoses.