Motor Guard AC4525 1/2 NPT Combination Compressed Air Filter Regulator

• Port Size is 1/2 NPT, Nominal Airflow is 100 CFM, Filtration Rating is 40 Micron, Maximum Pressure is 150 PSI and the Temperature Range is 40-125 F
• Locking T-handle for ease of adjustment and sight glass with float
• Made in USA
• Combines an efficient water and particulate filter and a high-flow diaphragm regulator into a single unit
• Provides for precise control of air pressure near the workstation

I was expecting something a little nicer since it was made in the USA. There is more plastic on it than I care for and the mounting hardware sucks. It comes with a ninety degree bracket and a 1/2 in conduit nut. One is supposed to screw a hose or whatever into it after first threading on the nut and placing the regulator on the bracket, then tighten the nut. I mean come on, for $100 plus put some damn threaded bosses in the thing or come up with a better bracket. The supplied gauge works well and it comes with a 1/4 plug for the back side. The 125psi limit really is the limit on this thing and that's if you take the locking nut off the T handle first. I'm only able to get about 120psi out of mine with the nut in place. The bowl on the bottom feel like a made in China casting. This is the end of my rant and if hind sight was 20/20 I would not have bought this thing.

New Pressure switch for air compressor 95-125 single port w/ unloader & on/off lever

• LeFoo pressure switch 95-125 single port with unloader & on/off lever
• Factory set 95-125 psi

Product description prior to purchase was insufficient and so it turned out to be the wrong part. There was a complete lack of any technical information or manufacturer's spec. sheet info.

Buy New Pressure switch for air compressor 95-125 single port w/ unloader & on/off lever Now

It works as advertised. This is exactly the same OEM switch that replaced my busted one, it just had a different company label so it may have even came from the same factory. Word of caution though there's a plastic adjustment screw for the high pressure cut off; take care in not over torquing it if it gets stuck or it'll snap the head off, that's how I busted the original one. I lubed the new unit's screw thread with a light coat of Teflon grease to prevent binding and it seems to work fine. Other than that it was, and is, a durable unit that had lasted me, and will last me years.

Read Best Reviews of New Pressure switch for air compressor 95-125 single port w/ unloader & on/off lever Here

I bought this switch 6 months before writing this review just to make sure it would work properly and last long. It has worked good and was easy to change, and the price was way better than the manufacturer web site even with shipping.

Want New Pressure switch for air compressor 95-125 single port w/ unloader & on/off lever Discount?

Received product on time no problems with the description nor use of the product items still in use I will purchase from this company again.

Save 77% Off

Used this to replace the switch on my old Montgomery Ward (You can tell it is old by the brand). The old switch was not operating all the time. New switch fit perfectly, was easy to install. Came set for 125/95 psi, had to reduce it for my use, which was a bit of a problem, but got it done. That is the only thing that kept me from a 5 star rating.

Amico Red Push Button 1 Port NC Type Air Compressor Pressure Switch

• Product Name: Air Compressor Pressure Switch; Type: 1 Port, Normally Closed(NC)
• Max. Voltage: AC 240V; Current: 15A; Pressure: 175PSI, 12 Bar; Joint Thread Dia: 11.8mm/ 0.46"
• Inlet Thread Dia: 6mm/ 0.23"; Total Size: 12.5 x 8 x 5cm/ 4.9" x 3.1" x 2"(L*W*T)
• Button Diameter: 2cm/ 0.8"; Inlet Hole Dia(Each): 15mm/ 0.59"; Material: Metal, Plastic
• Main Color: Black, Red; Weight: 287g; Package Content: 1 x Air Compressor Pressure Switch

I would have tried to return but the hassle was too much, i needed a two outlet and fixed this with that "t" adapter from lowes and some teflon tape.

Works great!

Professional Woodworker 9528 6.5 HP Gas Powered Air Compressor

• 9 gallon air tank; 6.5 HP OHV Energin engine
• 9.1 @ 90 PSI and 11.1 @ 40 PSI: Maximum PSI 125
• solid cast iron cylinder/durable steel air intake filter
• 2 regulated, factory installed air couplers to easily support two users
• High performance OHV engine with 10 year "Field Excellence" Record

It might all be made in China, but so far it has met all my needs.

I read another review complaining about the cfm being wrong, it's 9.1 at 115psi.

He could be right?

Buy Professional Woodworker 9528 6.5 HP Gas Powered Air Compressor Now

this thing is not what they say it is 9.1 CFM@90 AMAZON says this is a no return item do not buy this if you are as upset as me get ahold of me so we can file against Amazon

Pro-Force VPF1581719 17-Gallon Oil Free Air Compressor with Kit

• Oil free, low maintenance operation
• Equipped with pressure regulator, pressure gauge, quick connect air outlet, on/off switch and built in-handle for easy lifting
• Fully enclosed shroud to protect the pump and motor
• Includes extra value kit - 25-Feet recoil air hose, blow gun with safety nozzle, inflation needle and adapter fitting, dual tire chuck, quick coupler,1/4-Inch NPT male and female thread connectors and thread sealant
• Maximum pressure: 125 PSI; CFM at 90 PSI: 3.5; CFM at 40 PSI: 4.8; RHP: 1.5; UL and CSA certified

Arrived in nice condition, appears to be well made, wasn't powerful enough to handle blowing out my irrigation system but I knew it probably wasn't enough cfm's to handle that job, though it did pop the heads on 2 out of the 7 zones. Seems sturdy, has a pop out breaker on the engine which I didn't see right away, so if you trip it be looking for that. My 15 amp outlet had trouble with blowing the breaker in my breaker box, but the 20 amp outlet I tried next had no problems. If you are going to use an extension cord make sure it is heavy enough gauge.

12/6/12 update

Still own this compressor, still functions fine but the amount of air it leaks after filling is more prevalent now than when I first got it. I think the quality of fittings is just not that great on the unit. You are suppose to empty a compressor tank when you are done using it anyway, but don't buy this thinking you are going to fill it once a month (or week) and use it repeatedly off that fill.

Save 11% Off

The Souce OA-BRACKET10 Vehicle Bracket for The Source High Performance Air System

• Holds 10 # Tanks
• Mounts Easily to Vehicle Floors
• Aluminum Alloy Construction
• Hammer Coated Finish
• Can be used in conjunction with Roll Bar Mounting Clamps

This tank bracket will hold your tank securely, but it is poorly designed with little thought on how it will be used in many different vehicles and applications.

1st. The bracket securing strap uses a lever/fulcrum method to make sure the strap holds the tank very very tightly. And it does work, you can off road with this bracket and be certain your tank will not move. However, the strap itself needs a ton of room to work properly therefore limiting your mounting options to very large areas only. Basically you need the width of the bracket times 2 to mount and be able to use it. you can mount it horizontally, but the strap must be able to open upwards.. so you have only one option to mount it.. bracket lever upwards. If you are trying to mount in a tight spot pick another bracket.

2nd. NO THEFT PREVENTION FOR YOUR EXPENSIVE TANK.... The co2 tanks cost anywhere from 200.00-500.00 bucks. And the bracket itself is 45 bucks. Are you telling me that they never thought about theft prevention? They need to add a small hoop for a padlock or something so someone doesn't just walk up to your truck or jeep and walk away with your tank in 5 seconds flat. The bracket bolts into your truck so it it safe... but the tank is free for anyone to steal.

This bracket is solid as heck, and if you can find a place to mount it and pay a welder 40 bucks to add a bracket then you will like it. otherwise keep on looking.

Buy The Souce OA-BRACKET10 Vehicle Bracket for The Source High Performance Air System Now

The first reviewer was pretty accurate with his review, but there are updates I would add.

1) I was frustrated with the lever strap for about 15 minutes, because I don't have room to fully open the lever. This seemed like an impossible hurdle. However, I realized that the strap did not need to open to remove the tank. You simply release the lever, which loosens the strap, then pull the tank up and out. This method is easier than fully opening the strap each time, then having to fully close it each time. There is little need to remove the tank for my purpose, except to have it refilled. I use it to air up my tires after running in the soft sand. The hose is long enough to reach all four tires. Even still, I can easily remove the tank if needed.

2) The locking problem is an issue. There is a very small hole that could take a pull pin to keep the strap from opening, but not big enough to accept a padlock. It looks like there is a way to lock it down with something but I haven't really tried yet. I plan to run a 20mm cable lock through the carry handle and around my chase rack tubing. Padlock's are as safe as zip ties when it comes to anyone really wanting your stuff. It would take someone 6 seconds to cut the lock and take the tank.

The Power Tank mount looks much better built, but then you get what you pay for... Get a Power Tank if you want a Power Tank mount. It also comes with a loop for a padlock. It only costs about $200 more!

Campbell Hausfeld PA2078 Filter / Regulator / Lubricators

• Combines standard series filter, regulator and lubricator into one unit to save space
• Complete unit comes pre-assembled with modular mounting bracket for extra convenience
• 3.5 oz quick-release bowl and quarter turn drain allows easy maintenance

The first FRL unit I ordered was leaking in between the manifold. Amazon sent me another one and overnighted it. The 2nd unit has worked great. I would definitly recommend it.

Buy Campbell Hausfeld PA2078 Filter / Regulator / Lubricators Now

Be warned, the description for this regulator states It has a maximum input pressure of 250 PSI but when I received it, the box states the maximum input pressure is 150 PSI. I called Campbell Hausfeld directly and they said the box is correct, and that they need to update their description of the item. This looks to be Cambell Hausfelds fault as every place I found this regulator on the web had the incorrect description "From the Manufacturer".

Read Best Reviews of Campbell Hausfeld PA2078 Filter / Regulator / Lubricators Here

Of the Campbell Hausfeld filters & lubricators I wanted a blue set but this product was the only combined "set" I found. I figured blue, black, whatever but when I got it in the mail, it in fact was a blue set. Bottom line, I wanted an air filter, regulator, lubricator kit for my air compressor and this fits the bill perfectly. The only thing I noticed when I installed this and filled it with oil for use is that my air compressor already has a regulator on it at the hose connection and the two regulators are about 5 PSI different. When the regulator on my air compressor is set at 90PSI, the regulator on this combo is only reading 85PSI. So I just bumped the air compressor up to 95PSI in order to get a 90PSI reading on the combo set. I figure it's only 5PSI and within the range of the tools I have for no big issues. I still highly recommend this product.

Want Campbell Hausfeld PA2078 Filter / Regulator / Lubricators Discount?

The actual product delivered was the PA207803 blue one and not the PA207802 which was the one I really wanted since the black is the older version. Perfect match for my Campbell Hausfeld 60gal compressor.

Save 44% Off

does what it is suppose to do, if needed i will buy another one in the future, would reccomend this to others