Showing posts with label portable gas powered air compressor. Show all posts
Showing posts with label portable gas powered air compressor. Show all posts

Saturday, August 23, 2014

Campbell-Hausfeld CW301300AJ Air Compressor Pressure Switch Kit

Campbell-Hausfeld CW301300AJ Air Compressor Pressure Switch Kit
  • Pressure switch kit contains three parts
  • Replaces part number CW208102AV
  • This part is used on multiple Campbell-Hausfeld models
  • 6-Inch long, 5-Inch wide, and 3-Inch high
  • Package weight of this item is 3-Pound

This was easy to install after removing the original cut off switch. Works as expected and keeps the air pressure where it should be.

Buy Campbell-Hausfeld CW301300AJ Air Compressor Pressure Switch Kit Now

This replaces an older version of the pressure switch that Campbell Hausfeld made. I was nervous to order such an expensive fix site unseen, but this was a great experience! The package came with an instruction booklet and it was easy to follow to replace the whole part. No surprises! Thanks!

Tuesday, March 11, 2014

Schumacher PC-6 120AC to 6A 12V DC Power Converter

Schumacher PC-6 120AC to 6A 12V DC Power Converter
  • Converts 120 volt AC household currentto 12 volt DC power
  • Use for 12 volt coolers, 12 volt lights and other 12 volt accessories.
  • One 6 amp 12 volt socket

I originally bought a different brand, which lasted about 2 minutes before it burnt out serving a power load below its rated capacity. This one works and has not failed. It does get hot. And although you may think those ridges on the sides are metal heat sinks, they are just plastic decoration. The entire case is plastic, with just a few air holes. So if you can provide some airflow to help cool it, you should do so. I am using it to power a thermoelectric cooler, so I place it next to the cooler so the cooler fan blows on it. That helps.

Buy Schumacher PC-6 120AC to 6A 12V DC Power Converter Now

Original Review -

This converter works fine and gave new life to an old car stereo in my grandparents garage. Yes, like the other reviewer mentioned, this adapter is only rated for 6 amps rather than 10, but the description has been fixed now. The converter doesn't run hot while in use and the green power LED is a nice touch. However, I think that the build quality could be somewhat better, the top and bottom of the casing is warped pretty noticeably.

Update -

About a year or so after I wrote this review, I replaced the incandescent lights in my grandparents garage with fluorescent lamps. Unfortunately, whenever I would turn on the new lights, the car radio that was being powered by this converter would pick up interference from the fluorescent lamps. It would completely overpower any FM or AM station, and could even be heard when playing a CD or when using the auxiliary input. It seems this converter has very poor or no filtering. I have since switched to a Pyramid PS15KX 10A 13.8-Volt Power Supply with Cigarette Lighter Adapter, which does a great job at filtering interference and outputs more power as well. However, considering the extra expense, bulk, and heat output the Pyramid offers, I would still recommend this converter to someone who will not be powering any devices that are susceptible to RF interference.

Read Best Reviews of Schumacher PC-6 120AC to 6A 12V DC Power Converter Here

I have to refrigerate medicine, and have a small refrigerator (which holds a 6 pack of soda) that plugged into the car lighter. However, I was heading to a motel room which did NOT have a refrigerator in it. This was an absolute Godsend! I was able to plug it in, and then plug in my refrigerator--it has been a lifesaver--literally! I would recommend this item over & over!

Want Schumacher PC-6 120AC to 6A 12V DC Power Converter Discount?

It's working great with the Massair 250 psi air compressor which I use for topping up my car's tires. It barely gets warm.

Save 56% Off

Very good Power Supply for Kooltron Thermoelectric cooler application. It Runs cooler than the usual 5 vdc supplies and provides enough current for the cooler. Much bulkier than the normal 5vdc units but should last longer due to the cooler operation.

Saturday, December 28, 2013

Ampro A2570 5 Piece Air Coupler Set Brass, Milton Type

Ampro A2570 5 Piece Air Coupler Set Brass, Milton Type
  • Contains 1ea: 1/4 Female Air Coupler, 1/4" Female Connector and 3ea. 1/4" Male Connector

I installed these on a 3/8 hose. I used tape on the threads and there are no leaks around the threads. However, there is an air leak from the coupler. The male end does not fit snug enough into the coupler. If there is any lateral pressure on the connector/coupler, air leaks from the coupler. For example, when I connect the hose/coupler to the male connector in the end of my Ingersoll Rand 2130 Impact Driver, the hose must hang straight down from the tool. Any slight tug or slight pull on the hose, and air leaks from the coupler. This must be a problem with the coupler (not the connector), since I have no problem with air leaking from the coupler connected to the tank.

Buy Ampro A2570 5 Piece Air Coupler Set Brass, Milton Type Now

The are nicely made and finished. No jagged edges and they fit well my other air compressor accessories. One good thing about this kit is that it includes an adapter with a female thread. I had bought an air chuck that came with a male thread, so I needed this kit and the female thread adapter to fit the air chuck to my air hose, which also has a male thread. Another kit that is sold here did not include an adapter with a female thread, so that one is useless to me. That other one was also made of steel, unlike this kit, which is made of brass.

Read Best Reviews of Ampro A2570 5 Piece Air Coupler Set Brass, Milton Type Here

I like that they give you males and one female, which you might need if you're building a hose.

I've had cheaper generic steel ones that leak air, but these seem to fit perfectly and don't leak.

Want Ampro A2570 5 Piece Air Coupler Set Brass, Milton Type Discount?

Bought a compressor and a couple of nail guns in a kit. Wanted to add an oil/moisture filter/separator on a more substantial and longer hose than came with kit. Needed a few quick connects to make it all come together. Selected these. What a disappointment. The male and female with thread configuration did not work correctly with the air flow on the o/m f/s. Had to get a nipple and coupling to make it work. Now the configuration is several inches longer than it needs to be. This is tolerable if I pay attention to what I am doing. The worst issue which is intolerable is the leak rate between the coupler and my nail guns. The fit snaps on well but requires very careful positioning when I set the gun down to stop the air leak. I would not recommend these for any userunless your favorite sound at the job site is hearing your compressor run constantly, they leak that badly on my Porter Cable guns.

Save 35% Off

Can't use at all. Totally defective. Sliding sleeve does not slide. Dangerous. Poorly made. No quality control. First attempt to put together would have let manufacturer know it was bad. DO NOT BUY THIS PRODUCT.

Thursday, October 31, 2013

Engel MR040 Portable AC/DC 12 Volt fridge-freezer (40qt)

Engel MR040 Portable AC/DC 12 Volt fridge-freezer
  • Power consumption: 0.7 - 2.5 Amps
  • Volume: 40 qt. - Equivalent 58 cans (12 Fl.oz)
  • Weight: 48 lbs.
  • Freezing Ability: From 40°F to below 0°F
  • Warranty: 2 years

I'm an OTR trucker & this Fridge was tailor made for us guys. I have estimated I have saved many times the cost of this fridge over the 5 years I have owned it. Along with a small microwaveGE JES735WJ .7 Cu. Ft. Capacity Countertop Microwave Oven& a 12V/110 inverterCobra CPI1550 Dual Outlet AC/DC Power InverterI'm not a slave to overpriced truckstops. I can carry along a weeks supply of groceries(Leftovers, TV dinners, Lunch meats & cheeses etc.) along with all the beverages I need. Restocking is a matter of stopping at any large supermarket.Don't let the large size intimidate you as you rareley have to take this out of your vehicle......just take the removable wire basket(included) out, load & put back in the cooler & your good to go. The fridge fully loaded weighs upwards of 100lbs with 50 of that for the groceries. When I get ready to leave I just load the basket, take it to the truck & drop it in.

Unlike the cheap Thermo-electrics the Engels has a compressor & cools or freezes to whatever temp you set it., one or the other but not both, either a fridge or freezer & its not dependant on ambient temp.

A side benefit; unlike built in fridges this one goes with you whether your switching trucks or going on vacation to the lake(works on 110 as well as 12V so you have a spare fridge/freezer at the cabin)If you plan on an extended stay on the lake this will work in you boat as long as you have a 12V plug in.

All in all a great little cooler.Very rugged & very reliable

Pros

1.dependable

2.quiet

3.energy efficient

4.portability

5.built like a tank,steel housing

Cons

1.cost

2.bulky

If this one ever quits I will buy another.

Buy Engel MR040 Portable AC/DC 12 Volt fridge-freezer (40qt) Now

This freezer is based on the Sawafuji "swing" compressor. Unlike the fairly similar and far less costly EdgeStar FP430 which uses a Danfoss compressor, the Engel MT45F is specifically designed to be operated in a moving vehicle, and can be run while at an angle of up to 30 degrees. It pulls a maximum of 2.5 paltry amps at 12 volts DC (the Edgestar draws 2.75 amps max, but can get food a little colder). It has a steel exterior, while the similar but less expensive ARB Fridge Freezer, which also uses the swing compressor, has a tough plastic housing, which might be a better choice for boaters.

The Engel is built like a tank, and comes with a 2-year factory warranty. I've had mine running while driving over thousands of miles of rutted dirt and gravel roads, and it works as well as the day it was new.

My biggest beefs with the Engel are: the price, which is close to twice that of the comparable Edgestar and more than the ARB; the storage capacity, which is pretty small; and the primitive controls--no temperature readout, and only a single dial marked 1 5. A more minor gripe is that the compressor hum, while not terribly loud, does seem to carry--you'll know when the Engel is running. Also, it is heavy. Those big steel handles are there for a reason (they also make good tie-down points).

Read Best Reviews of Engel MR040 Portable AC/DC 12 Volt fridge-freezer (40qt) Here

I've been an avid camper for more than three decades and got into off-road exploring about 18 months ago with the purchase of a new truck. We often spend two and three nights and days out in the desert of Southern California trekking about. In the summer we have problems maintaining our food at safe chill levels and our drinks at the preferred temperature.

I have an electric cooler which does only a fair to poor job of keeping the internal temperature 20-30 degrees cooler than the 100 degree external temperature. Food will spoil quickly at these temperatures. I've tried three different coolers of increasingly larger sizes stocked with more and more ice. I ended up with two coolers stuff at about 50% ice and 50% food or drink.

With the outside temperature of 68 degrees I read the following temperatures inside the empty Engel 45:

1 = 39 degrees

2 = 25 degrees

3 = 20 degrees

4 = 14 degrees

5 = 1.9 degrees

The basket pulls out so that you can fill it in the kitchen and haul the food out to the waiting freezer. This helps make moving the already freezer easier.

Want Engel MR040 Portable AC/DC 12 Volt fridge-freezer (40qt) Discount?

I do a lot of off-road camping (research). I used a Dometic absorption cooled refrigerator for the past few years, which ran on 110 / 12VDC / Propane. The challenge I've had with the Dometic is it couldn't keep temperature in the desert heat. Other problems were the Dometic had to be out of the wind else the flame blew out and absorption systems need to be absolutely level something difficult to achieve when off-road. After a 10 day trip where some of the food spoiled in the Dometic despite my best efforts, I made the decision to look for a more capable refrigerator. After considerable research, I settled on the Engle MT45.

What a difference! The MT45 easily maintains temperature in the desert heat and will quickly chill water bottles and drinks added in something the Dometic couldn't do. It is surprisingly efficient. While the unit is rated at 2.5 amps, that's it's maximum draw at start-up when cooling down. My experience is that it draws on average around 1.1 amps (cycling on and off) when it is up to temperature. My vehicle has an auxiliary battery which is recharged by a 110 W solar panel when on location. With the Engle drawing approximately 30 W maximum, the setup is sufficient to keep the MT45 running indefinitely without the need to start the vehicle to recharge the AUX battery. With a 105 AH AGM battery, I can run the Engle for two days without recharging the battery, figuring a 50% max discharge of the battery and no sun to supply the solar panel. That's pretty good efficiency. The MT45 can operate at an angle of up to 30 deg. No more having to shove shims and rocks under the fridge to get it level like I had to do with the Dometic.

While the MT45 doesn't have a temperature read out I found that a wireless thermometer works just fine and is a small price to pay to be able to see the internal temperature up front in the drivers seat (or trailer). Keeping the MT45 dial at a little above 1.5, the fridge maintains temperature at 38 deg. F. The dial ranges from zero to 5. At 4 or 5 the MT45 can keep items frozen solid.

I really like the basket arrangement. It makes it easy to see and get at items. It also allows me to carry the refrigerator to the Land Rover empty then carry the food and drop it into the Fridge, lessening the weight I need to carry. The old Dometic had to be filled then carried, often very heavy to lift. So while some complain about the weight of the MT45, remember that you don't have to lift it with the food in it. Another benefit that I really like is I can pack the food in the Engle basket and store it in my home refrigerator to keep it cool until I'm ready to transfer the food to the MT45 before heading out.

The MT45 is built tough with solid steel construction, which adds to the weight. I'd rather have a durable unit than one that can't take the abuse. I'm miles from civilization and I need reliability.

I read a few comments about the vibration. While I don't discount that the individuals may have gotten a particularly noisy unit, a hum is characteristic of the Engle "swing" motor compressor. The compressor has only one moving part, making it far more reliable and efficient than other designs. My MT45 does have a hum when running but it doesn't bother me. It's really not all that noticeable. It is certainly louder than my previous Dometic, which made no noise at all but, after all, it is a compressor design, which is far more capable than the absorption design of my former Dometic. It's going to make some noise. I'm happy to have cold drinks and food that isn't spoiled. That's the whole point in my estimation.

Overall, I'm very pleased with the Engle MT45. I wish I had purchased it years ago and avoided all of the challenges I've faced trying to keep perishables from perishing when out at research locations in the desert Southwest.

Right out of the box it had a constant hum whenever switched on. It also had a lot of vibration. Even when placed on a pad or a carpeted surface, it would still make a constant sound. Could be heard when I had it in the tailgate of my SUV and I was driving!

For several weeks I've been 'working' with Engel on resolving this. They said it's not uncommon. They believe it's caused by something in the compressor mounting shifting during transit. They first had me 'bang' it on each of it's sides while it was running. Then they had me open it up!...and directly hit the compressor with a rubber mallet, again trying it on each side (orientation) and with it running.

Nothing has made a difference. Each time I've spoken to them I've asked for return information so I can send it to them to be replaced or repaired (though I'd prefer a brand new unit just replaced). I think they're being cheap as they insist each time that they have something new to try that'll be easy. All I've accomplished is getting scuff marks on the outside of my unit as well as paint chipped on the compressor housing.

This is not a $20 item! And yet they treat their customers as it was. I would not recommend anyone to buy one of these. This is not a unique occurrence. I know this because Engel told me this! Also, if it was a rare occurrence, they wouldn't hesitate to have me ship it to them for repair. They obviously have a problem and are trying to resolve it as cheaply as they can and/or get people to give up on their grievance.

Friday, August 30, 2013

12 Volt Extension Cord - 25'

12 Volt Extension Cord - 25'
  • PART# 79717
  • 25' OF WIRE
  • ALSO SEE PART# 79717

This cord does not stay plugged in. It simply doesn't fit other standard 12 volt ends.

Buy 12 Volt Extension Cord - 25' Now

As advertised. Does the job I wanted: a line down into my storm shelter to run and charge emergency lights and items. If you need a long DC line between your vehicle and DC components... you've found it.

Read Best Reviews of 12 Volt Extension Cord - 25' Here

I purchased this to extend the reach of a DC powered air compressor. Was deep in the desert of Mexico and found that this item didn't work. I was in a jam and had to extend the reach of the air compressor to inflate a flat tire on a boat trailer. That's when I found out that this item was defective. Had to cut off the connectors and do a quick and dirty splice into the wire attached to the air compressor.

Don't buy this item. If you do buy this item please make sure to test it immediately.

Want 12 Volt Extension Cord - 25' Discount?

Everything is fine w/it other than we found out we actually had to either hold in on the cord which we plugged into the ext cord or push it in and then tape it on tight. Not what I wanted to do.

Save 2% Off

price was right and length is great for reaching all our Durango's and Trailer's tires with our air compressor while still attached! Plus I don't have to move our riding lawnmower against the bumper to fill those tires!

Sunday, August 4, 2013

Square D Co. FSG2J24BP Pumptrol Pressure Switches

Square D Co. FSG2J24BP Pumptrol Pressure Switches
  • If You have the right tools You can complete any job!
  • We have 8 warehouses in the U.S. so you will get your order Fast!
  • Warehouse Locations:

    Cape Girardeau,MO

    Medina,OH

    Lexington,SC

    Montgomery,NY

    Dixon,IL

    Waco,TS

    Woodburn,OR

    Mesquite,NV.

I had to throw it away after it would randomly get jammed on and couldn't turn off. It would happen randomly with no clear cause.

Buy Square D Co. FSG2J24BP Pumptrol Pressure Switches Now

I am sad to say that the photo of this switch shown on this date is a misrepresentation of the product. The photo shown clearly indicates that the switch is "Made in the USA". In fact it is "Made in Mexico". I will say that I installed it and it worked fine from the get go. How well it holds up remains to be seen. I actually went out of my way to buy a Square D Switch as I have always had good service from their products. I don't understand why we can no longer make a switch like this in the USA. I hope Square D's quality control in Mexico is as good as it was in the USA. Delivery of this switch was very timely, I'm just sad that it wasn't made by one of my unemployed neighbors.

Wednesday, July 24, 2013

Makita T-01133 1/4 by 50 Polyurethane Contractor Air Hose

Makita T-01133 1/4 by 50 Polyurethane Contractor Air Hose
  • Up to 2X Lighter than Heavier Hoses
  • Highly Flexible and All Weather Resistant
  • Up to 3X More Durable than Plastic Hoses
  • Less Resistance when Dragging
  • No Tangle and hassle-Free memory

I'm using 50 feet hose around the house and it's great! Lightweight and durable at the same time. It also says Made in U.S.A on mine. Makita makes good tools and I own lots of them. Most of my friends who are professional contractors use Makita. Our local grocery store has just been remodeled and to my surprise, every time I walked in I saw workers with Makita tools :)

Buy Makita T-01133 1/4 by 50 Polyurethane Contractor Air Hose Now

I have the 100'er and really like it thus far. Solid construction and doesn't tangle the way a lot of polyurethane hoses do. Give it a try and you won't regret it.