Stanley Bostitch Air Compressor Replacement PRESSURE REDUCER #AB-9051116

• Genuine OEM Replacement Part #AB-9051116
• Compatible with Stanley Bostitch Compressors.
• What's included : (1) Replacement Stanley Bostitch Air Compressor Replacement PRESSURE REDUCER #AB-9051116
• New, bulk packaged
• Please refer to list below for compatibility

i have a husky air compressor that is about 2 years old the reducer broke and i was looking for a brand new air compressor.. i found this replacement and it has worked perfet i just unscrewed the silver part of it and left the air tubes still intact and screwed it right in in like 10 min...saved me about 200 bucks..

Interstate Pneumatics SA9M 4 Inch Diameter -1/2 Inch MPT Metal Body Compressor Air Intake Filter wit

• Greater durability than other filters in the market
• Designed for use with most of the brand compressors
• Filtration Efficiency Over 99%

It was a good price but it needed work to function. The filter is not tall enough to seal in the housing. When the cover is installed and tightened it hangs up on the inlet tube on one side. to let the cover sit flat and seal on the filter I had to cut a notch in the cover.

Grex Genesis.XT Double Action Pistol Style Trigger Side Gravity Airbrush, 0.35-mm Nozzle, 7ml and 15

• Easy-to-use and ergonomic double action "pull" trigger controls both air and paint
• Internally mixed, cutting edge design for precise control of fine detailed work.
• Interchangeable and 360 Degree adjustable side mount reservoirs
• Replaceable solvent proof teflon seals, precision machined stainless steel nozzle and needle
• Preset adjustment knob for precise paint volume control

I had an Aztek airbrush that I could never get to work right. Bought this one after considering the Iwata trigger model.

Much better price on the Grex and their service is excellent. I own their air nail guns too.

The trigger is definitely a plus. Due to a shaky hand, I couldn't control the button style DA and get any decent paint flow. Now this one has me doing everything I always dreamed of.

Easy to load and easy to clean. I even use cheap craft paints in it with good results.

Buy Grex Genesis.XT Double Action Pistol Style Trigger Side Gravity Airbrush, 0.35-mm Nozzle, 7ml and 15 Now

The best airbrush I have ever used. I have arthritis in my hand, with the trigger there are no issues unlike the traditional style of trigger

Read Best Reviews of Grex Genesis.XT Double Action Pistol Style Trigger Side Gravity Airbrush, 0.35-mm Nozzle, 7ml and 15 Here

This may simply be the very best airbrush I have ever used. Love it. Very dependable. We use it daily without issue.

General Tool 836 Angle-izer

• Tough plastic design won't bend or rust
• Ideal for tile, paving, carpentry
• Free instruction CD

I wish I had this when I was just doing a kitchen floor that had a lot of weird angles. This is a great little inexpensive way to measure the angles and get them cut correctly. I guess the pros must all have these, but I'm a weekend warrior with these projects, so sometimes I'm not aware of every tool out there.

With this tool you can get a "template" sort of for every cut you have to make. It really works well. It's not expensive and it will pay for itself by saving you from having to throw away incorrectly measured cuts. If you have to do any sort of flooring or any odd angle cutting, you'll love this thing.

Buy General Tool 836 Angle-izer Now

I used this for laying out window sills. The angle of the corner of the wall window opening is never 90 degrees and usually varies widely from window to window (depending on quality of framing and drywall finishing). So each window sill ends up being a custom fit.

With this tool, I can establish the angle, lock it down, then transfer it over to the sill. Zip it out with a saber saw and finish (route edges, sand, stain, etc). Done!

Good deal!

250 PSI 12-volt Air Compressor

• 250 PSI Mini Compressor
• 10 ft cord with Cigarrette lighter plug- great mobility for Road-side assistance
• 2 nozzle adaptors and sports needle with pressure gauge
• Easy-to-read pressure gauge; 3' rubber hose and inflation tips

no off switch, also the connector to the valve stem works too hard.

the air hose should be longer, if the tire stem is in top position it

leaves the compressor hanging in mid air.

however, it works, making it worth-while

Buy 250 PSI 12-volt Air Compressor Now

This pump is the perfect air pump for my car. It's small yet powerful. A must for any vehicle owner.

Read Best Reviews of 250 PSI 12-volt Air Compressor Here

this little compressor is great for volleyballs ,basketballs ,and footballs . it also is good for bikes and other blowup toys . I havent tried it on car tires yet .

Leviton N1302-DS 30 Amp, 600 Volt, Toggle In Type 1 Enclosure Double-Pole AC Motor Starter, Suitable

• Thick Walled PBT Housing and Interlocking Face Encapsulates and Protects Internal Mechanism in Extreme and Harsh Industrial Environments
• Insulating Barriers Provide Terminal Isolation Between Phases
• Impact-Resistant PBT Face and Base
• Large Toggle is Easy to Turn ON/OFF with Gloved Hand
• 10 Year Limited Warranty

This is a no frills very well made switch suitable for motor control when you don't need an internal fuse to protect the motor from overload, or when there is overload protection on the motor itself. I used it on a 2 hp motor on my 8" jointer. Probably not as safe if there are inquisitive children around as the push button contactor with lockout type switches that ship with new jointers. The toggle and contacts are large and robust, so it should hold up well.

Save 19% Off