- 1/2-inch to 1-3/16-inch 23-gauge pin nailer; low-profile nose-piece tapers for clear site
- Adjustable high/lower power switch for depth control and longer life
- Lightweight and durable aluminum housing
- Includes nailer, oil, abrasive, and kit box
- 7.81 by 9.06 by 1.6 inches; 2.3 pounds; 7-year limited warranty
Buy Stanley Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Now
Just returned mine and ordered a Grex 635 instead. I fired about 40 pins in hard and soft wood, tried various compressor pressure settings, and various settings of the so-called "depth control." The gun jammed once. If the air pressure is at the low end of the recommended range (70-100 lbs.), or if the so-called "depth control" is set low, pins will usually be proud of the surface. With the proper adjustments the best you can do is get them to be flush, which is unacceptable as far as I'm concerned. According to Bostitch Customer Service, this pin nailer is not designed to countersink pins, but rather to leave them flush with the service. The "depth control" is a misleading name for what is really just another way of adjusting air pressure. It does NOT change the travel distance of the pin.Read Best Reviews of Stanley Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Here
shot up many a clip of pins over the past week on a kitchen with cherry cabinets and trim. guns of this ilk are absolutely invaluable in delicate/intricate hardwood production work, from temporary jigging to glue up clamping to achieving the perfect miter. but this gun drove me up the wall and forced the guy coming behind me with the markers and putty to take his artistry to a new level. almost every pin stood proud, long grain shots and end grain. if it wasn't proud there was the slightest dent from the gun nose and the pin was still didn't countersink. when trimming in standard fjp this gun is a godsend, but for hardwood work you had better invest in a microscopic nailset(alien technology, coming soon) if bostitch hasn't decided to include one in the case already...to follow up, this pinner is but a continuing let down. production installation of hardwood is the name, having the pin hold the pieces is but half the game. the many, the proud. i have a quick learning curve, now i've got a grex.
Want Stanley Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Discount?
I just received this nailer about a week ago and have put it to work everyday. The first time I used it I noticed it would only drive the pins flush which makes the tool useless. The pins wouldn't even countersink in pine. I decided to grind the tip down a little hoping that it would allow the driver to make the pin go well below the wood. I'm sure Stanley wouldn't recommend this, but it did the job and now my pins go just the right depth in any wood that I use it on. Besides this minor problem everything else is perfect with tool including the case.Save 40% Off
I was excited to purchase this nailer based on its ability to drive pins in excess of 1 inch. When it arrived I was pleased with the construction of the unit, very well made in the true Bostitch tradition. Upon immediately firing up my compressor to see what the unit will do, I was disappointed to see that it had a problem driving the 1 3/16 inch pins all the way into hardwood, in this case red oak. I tried different settings and even with the PSI set to max the pins would not countersink. I had to use a nail punch to finish the job, which is counter intuitive to why you would use a pin nailer to begin with. Other than that the nailer performs flawlessly, never jamming, etc. And by the way, the 1 3/6 pins are tough to come by. I have not seen them in any of my local home improvement or hardware stores. They are available through Amazon however, so you can stock up there.
