New 1/4" ASME Safety relief Valve 125 PSI American made

• 1/4" Safety Valve 119 SCFM - 125 PSI
• Free Shipping
• 51 mm Tall x 17.5 hex
• ASME Certified & stamped w/ UV & UB stamps

Nice Quality part--Made in the USA! Much better than cheap pop off valve that was on compressor from factory. What more can you say?!

Buy New 1/4" ASME Safety relief Valve 125 PSI American made Now

This is a very good, excellent made valve to keep pressure levels safe in air compressors. I also Liked the free shipping with this product.

Read Best Reviews of New 1/4" ASME Safety relief Valve 125 PSI American made Here

Had to replace a few things because this compressor is 20 years old. The replacement worked very well.

The main problem was the check valve leaking and causing the compressor to cycle every few hours so I replaced

a few things, this among them.

Sunex SX3835 3/8-Inch Impact Ratchet Wrench

• 70-Feet Pound of reactionless torque
• 500 rpm of free speed
• Weighs only 2.82-Pound
• One-year limited warranty
• Specificat ions: square dr. 3/8-Inch torque 70-Feet Pound, free speed 500 rpm, weight 2.82-Pound, length 10.9 -Inch , ave air consumption 2.5 cfm, air inlet thread size 1/4-Inch npt, min hose size 3/8-Inch id, sound level 90 dba

This is a good ratchet love the way it works and does not torque and smash your knuckles. Has good torque the impact feature of this ratchet makes all the difference in the world.

Save 49% Off

Vaper 19303 1/4" Locking Pressure Regulator with Gauge

• Small and light weight
• Attaches to all conventional and hvlp spray guns

works just like it's described, however, not as good as the RTC locking pressure regulator I have for my other spray gun

Buy Vaper 19303 1/4" Locking Pressure Regulator with Gauge Now

The digital readout went bad on my 155 psi air compressor, so I bought this to install inline so I could see what pressure I'm running . Maybe I bought the wrong thing, but this gauge/regulator is not working for this. If I crank the regulator to max, which should be 180 psi, and crank my compressor to max, which is 155 psi, air just constantly blows out of some kind of relief valve in the gauge. I do achieve a full 155 psi, but the compressor never shuts off since that air is venting. The gauge seems fairly light weight, but that's to be expected at this price point. It installed easily and has a nice dial. So, I'm tentatively giving it four stars for these factors and assuming I'm doing something wrong or bought the wrong product. But why would air vent on a pressure gauge? If anybody can help me out with this I'll update the review. Thanks.

Read Best Reviews of Vaper 19303 1/4" Locking Pressure Regulator with Gauge Here

I installed this over a year ago and it's never leaked or given me any issues. The valve was easy to mount and is really easy to adjust. I don't even need my glasses to read the numbers. You won't go wrong if your looking for a regulator with a gauge.

Motor Guard AC4525 1/2 NPT Combination Compressed Air Filter Regulator

• Port Size is 1/2 NPT, Nominal Airflow is 100 CFM, Filtration Rating is 40 Micron, Maximum Pressure is 150 PSI and the Temperature Range is 40-125 F
• Locking T-handle for ease of adjustment and sight glass with float
• Made in USA
• Combines an efficient water and particulate filter and a high-flow diaphragm regulator into a single unit
• Provides for precise control of air pressure near the workstation

I was expecting something a little nicer since it was made in the USA. There is more plastic on it than I care for and the mounting hardware sucks. It comes with a ninety degree bracket and a 1/2 in conduit nut. One is supposed to screw a hose or whatever into it after first threading on the nut and placing the regulator on the bracket, then tighten the nut. I mean come on, for $100 plus put some damn threaded bosses in the thing or come up with a better bracket. The supplied gauge works well and it comes with a 1/4 plug for the back side. The 125psi limit really is the limit on this thing and that's if you take the locking nut off the T handle first. I'm only able to get about 120psi out of mine with the nut in place. The bowl on the bottom feel like a made in China casting. This is the end of my rant and if hind sight was 20/20 I would not have bought this thing.

17 Piece Accessory Kit

• 1/4"" NPT, Industrial Interchange
• Kit includes:
• Safety lever blowgun

I was worried because I saw several bad reviews on cheap accessory kits, but these work great, I installed them all with tape,everything fits and there are no leaks except the junky little blower attachment. I've modified it quite a bit and still cant get it air tight. I just don't keep it attached.

Save 65% Off