Wednesday, September 11, 2013

Wagner Power Products 276124 Conversion Gun

Wagner Power Products 276124 Conversion Gun
  • Paint spray gun for converting high-pressure compressors into HVLP fine-spray system
  • 3 spray patterns; 89 percent product transfer efficiency; fluid and air controls;
  • Works with compressors with at least 1-1/2 horsepower; all metal construction
  • Includes conversion gun (0276124) regulator valve, bleeder and non-bleeder connections, needle/nozzle fine-finish projector set, 1-quart cup
  • Weighs less than 6.6 pounds

Works extremely well, has all the features/adjustments of regular HVLP sprayers, works even with my little 2HP 6 Gal PorterCable pancake compressor that came with my air nailer. Granted the compressor does run more often than when your just nailing things, but I haven't had a problem as I build some furniture projects. I imagine painting a room or large objects would be better suited to turbine units that can supply a continuous airflow. But it beats spending hundreds more for a turbine unit that would just take up more space in my shop. If you have a compressor and want to try spraying finishes this is an economical way to start. A complete review can be found on the internet by searching.

Buy Wagner Power Products 276124 Conversion Gun Now

I purchased one of these guns from another site that sells them at a good price.

It's performed quite well and is very flexible. I have painted 3 rooms in my house as well as painted some furniture. Also, I have tested some water-based lacquer and it performed very well.

This is a great gun to buy especially if you already have a compressor. There are reviews on the internet (if you search you can find them) detailing successes using this gun with pancake compressors.

I am surprised and disappointed that Amazon is clearing this gun out given how well it performs. Not to worry if you buy one, there are other sites that sell this gun and numerous parts and extra projector sets. Just do a thorough search and you will find it.

Read Best Reviews of Wagner Power Products 276124 Conversion Gun Here

I just finished spraying a door with latex which is tough to spray even in the best of circumstances. Once I worked out the settings, the gun sprays nicely and evenly. The gun leaked at the packing seal out of the box and dropped blobs of paint on my door before I noticed the leak. The manual if you want to call it that is horrible. No advice on adjustments depending on material being spray, just a parts diagram and some crummy directions on how to hold the gun level. I'm used to spraying Acrylics and lacquers with my old Binks 62 so I know how to use a gun, I just need some advice on spraying with the HLVP process which is a bit different than the "old" days. The quality of the gun is good and it appears to be well made. It's a shame that Wagner did not put a bit more into the customer service side and include a decent manual.

Want Wagner Power Products 276124 Conversion Gun Discount?

Being my first HVLP gun I was quite pleased. For my first project I painted 6 chairs and 1 patio table with only 1 quart of black Rustoleum paint. That is how impressive the lack of over spray is on this gun. I used 15% Acetone in the paint and found the best way of measuring is to purchase some cheap semi-transparent measuring containers at your local hardware store.

Cleanup was a breeze as per the directions, just remember to spray the gun out in something like a trashcan.

Some pointers:

Even with the small amount of over spray, wear a mask. I didn't at first and after a good sneeze found black paint coming out of my nose. It may seem like common sense but it is something that is easily over looked.

The only problem I had with the gun is easily picked up in the instructions. There is a seal on the top of the paint canister that after some time of getting moisture will swell to get an airtight fit. When I was cleaning the gun with Acetone, the enlarged seal prevented me from properly locking the canister to the gun. Not noticing my mistake, I picked the gun up and the canister fell to the floor dumping the contents. Yes it was a mess to clean up, but a lesson well learned. The engineering could of been better on this aspect so beware.

Also when cleaning, take the needle valve out easier by pulling the trigger to send it out the back of the gun.

great gun! by removing the supplied regulator and attaching the quick connect fitting from your turbine gun you have the capspray titan II at half the price. save yourself the money and go this way.

No comments:

Post a Comment