GOODYEAR 46544 3/8-Inch by 25-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict

• Solid Brass End Fittings: 1/4-Inch NPT (M)
• Spiral Synthetic Yarn Reinforcement and Abrasion-Resistant Rubber Outer Jacket
• Bend Restrictors Prevent Kinks Near End Fittings
• 100% Made and Assembled in the USA
• 10 Year Guarantee

After using this hose with my framing gun for a few weeks the Campbell Hausfeld quick release valve I had bought broke and I had threaded it in with Teflon tape for a tight seal.

While trying to get the valve off, the hex nut on the hose stripped and I couldn't get a good grip on it again. I chalked it up to crappy brass and decided I'd go with another brand, Porter Cable.

Just got the Porter Cable delivered and as soon as I opened it the difference in quality was pretty clear. The Goodyear hose is thicker (more rubber around the chamber), more flexible, has nice anti bend sheaths at the ends and just feels like a quality product. In comparison I almost mistook the Porter Cable as the wrong size because it is so skinny, which tells me that the rubber is thin. The hose feels stiff, almost like a PVC, though it's clearly labeled as rubber and it stank to high heaven when I opened it.

The Porter Cable was $4 less than the Goodyear and looks to have the same fittings but already feels cheap in comparison.

Time will tell but to be safe I'm ordering another one of these with a better quality quick release.

So in short, I'd recommend the Goodyear hose, just be careful when attaching or removing valves. It's worth it to have a properly sized, quality crescent on hand but even then, easy does it. The metal is a bit soft and strips easy so it loses a star there. If you can get around that this is a really nice hose.

Buy GOODYEAR 46544 3/8-Inch by 25-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Now

Quality construction, lifetime warranty (save your receipt), air hose. I had no problem attaching fittings to the Brass air hose ends. This product is not made by Goodyear, a second party licenses the brand name and makes this air hose.

Read Best Reviews of GOODYEAR 46544 3/8-Inch by 25-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Here

This is way better than your average hardware store retail hose.

Mine does not see heavy usage, I expect it to last a long time.

If mobility is a big consideration, this hose might be kind of heavy.

Want GOODYEAR 46544 3/8-Inch by 25-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Discount?

I expected premium quality, and got it. It's being used in a retractable air hose spool in the garage. While not used daily, this hose should easily last 12-14 years, if not more.

Save 49% Off

Well there is a phrase I would never have thought I would say. This is a nice quality air hose that is rated @ 300psi. I also purchased the 250psi version that has a little smaller outside diameter. The increased OD of the 300psi hose makes the hose a little more difficult to handle. By no means is this a deal breaker, but for light use I would recommend the 46504 or 46501.

Gallo Condensate Blowout Gun by Diversitech

• Hard to reach places are not a problem with this lightweight and portable tool.
• This environmentally friendly product uses carbon dioxide, not refrigerant to clean drain lines.
• This tool is small, lightweight and portable to fit in any toolbox or tool bag.
• Operation is a snap with a press of the trigger

Our central a/c and heating unit has flooded our basement twice. Both times it was related to a clog in the condensation tube that drains out. Typically this happens in the spring (or when we have turned our A/C off for a vacation) when the water hits a clog that built up during dry periods.

The last time it was "repaired", the plumber used this device to blow out the clog. He also installed an access point (with a cap) so that I can try to keep the problem from recurring myself.

Because of the way our drain tube is installed, it is hard to focus air to the area that usually clogs. This device allows me to shoot a burst of air into just the part of the pipe that gets clogged. The hose is not long, but I just need to get a couple inches past the join that comes from the main unit.

I now have a calendar reminder to blow out the drain a couple times a year. No floods since I got this device.

UPDATE: I realize as I re-read this, that I did not specify that this product uses CO2 cartridges made by the manufacturer. Not sure if you could use "generics". This is an additional cost that should be factored into your purchase consideration. They can be pricey. However, I only blow out the tube twice a year (fall and spring), so a box of eight cartridges should last several years.

Buy Gallo Condensate Blowout Gun by Diversitech Now

I must say that when the A/C tech came out and charged me $45 (half price) to use this tool on my drain line to clear it, I felt like I paid the stupid tax!! Although I use bleach in my drain, it wasn't enough to keep mine clear. So, now, I use this in addition to the bleach!! The cartridges are cheap (I bought them at a sports store: Academy), so I won't have to worry about this in the future!! This is a must have for any homeowner with an A/C (especially if the drain goes along the ground!!).

Read Best Reviews of Gallo Condensate Blowout Gun by Diversitech Here

Wow! This thing is a lot better than lugging around an air compressor. We maintain a building with 75 split systems and the pvc drains have started to bow... This makes clearing them super simple. It takes one cartridge per use.

I highly recommend.

Pro-Force FT10 10-Gallon Portable Air Tank

• 135 Max PSI
• Fully assembled, ready to use
• High quality brass manifold
• Durable welded on handle
• Equipped with air pressure gauge, air line shut-off valve, pressure relief valve, easy access fill valve, 3-Feet by 1/4-Inch air hose and air chuck

The tank arrived within the scheduled and promised time and worked as expected. I really like the larger capacity of this tank compared to the smaller one I've used for years. I immediately modified the tank to accommodate quick connect accessories so that I can use it as an inflator or duster and can even use small air tools in a pinch. Overall, this is a very well made product and I would recommend it for small 200 PSI and under project needs.

Save 24% Off

Solberg FS-06-038, Miniature Filter Silencer/Breather for Compressors & Blowers, 3/8" MPT,

• Increase lifespan of equipment
• Reduce noise levels
• Decrease maintenance costs

This is the big brother of the 6 SCFM version (Solberg FS-04-038, Miniature Filter Silencer/Breather for Compressors & Blowers, 3/8" MPT, 6 SCFM). This one is rated at 8 SCFM and is physically bigger (wider and taller). Used it on a Dewalt D55146 (DEWALT D55146 4-1/2-Gallon 200-PSI Hand Carry Compressor with Wheels) and it fits and works very well.

What I like about this is the all metal contruction. There is a filter cartridge inside which is replaceable (costs a dollars from Grainger).

What I don't like about it is the *tapered* 3/8" male nipple. This is normally good but I could only get half of it to go in. So the thing stick out as though I forgot to tighten it.

In terms of noise reduction, it does no better nor worse than the OEM filter, which was plastic.

Buy Solberg FS-06-038, Miniature Filter Silencer/Breather for Compressors & Blowers, 3/8" MPT, Now

I bought this for use on my Dewalt D55155 compressor I bought of amazon a few years ago. The compressor is a powerhouse for such small size, and unfortunately makes quite a racket when its running. After reading the solberg website and some other reviews on the web I had high hopes that this little device might tame my compressor.

I swapped this in place of the small plastic filter on my compressor and fired it up, and was quite disappointed to find there was no noticeable difference in the loudness of the compressor.

My dewalt compressor is a direct drive oiled compressor which means both the motor and pump are running at the same high speed. I think this filter/silencer might be much better suited to belt driven compressors where the pump is run at lower speeds.

For my application I'd give this product a 1 star rating as a silencer. On the other hand the filter aspects of it seem quite high quality and I'd happily give 5 stars to. But since I bought this product specifically for its silencer claim, I feel I can only give it 2 stars overall.

Read Best Reviews of Solberg FS-06-038, Miniature Filter Silencer/Breather for Compressors & Blowers, 3/8" MPT, Here

Well worth the money, they are soo hard to find. Sears charges more for the same filter. I'll but again from Amozon.

Black O Ring Clear Plastic Oil Liquid Level Sight Glass for Air Compressor

• Material: Plastic
• Color: Clear, Black, Red
• Thread Diameter: 24mm/ 0.94"
• Overall Size: 35 x 18mm/ 1.4" x 0.7" (D*T)
• Package Content: 1 x Oil Level Sight Glass

Bought it on a hunch that it may or not fit my compressor. My old sight glass started to leak oil through the front glass seal. It was cheap enough to take the risk and I lost. It would be nice if they had given the thread size. They show 24mm dia. but not the ACTUAL thread type or size. My compressor fits now a 1/2" NPT blank plug. This item may be an oddball at 24mm and may fit a 5/8" NPT as 1/2" is too small and a 3/4" is too big. Maybe I can re tap the hole in the compressor or try to find an adapter.

One good thing the shipping was quicker than anticipated

Wagner Power Products 276124 Conversion Gun

• Paint spray gun for converting high-pressure compressors into HVLP fine-spray system
• 3 spray patterns; 89 percent product transfer efficiency; fluid and air controls;
• Works with compressors with at least 1-1/2 horsepower; all metal construction
• Includes conversion gun (0276124) regulator valve, bleeder and non-bleeder connections, needle/nozzle fine-finish projector set, 1-quart cup
• Weighs less than 6.6 pounds

Works extremely well, has all the features/adjustments of regular HVLP sprayers, works even with my little 2HP 6 Gal PorterCable pancake compressor that came with my air nailer. Granted the compressor does run more often than when your just nailing things, but I haven't had a problem as I build some furniture projects. I imagine painting a room or large objects would be better suited to turbine units that can supply a continuous airflow. But it beats spending hundreds more for a turbine unit that would just take up more space in my shop. If you have a compressor and want to try spraying finishes this is an economical way to start. A complete review can be found on the internet by searching.

Buy Wagner Power Products 276124 Conversion Gun Now

I purchased one of these guns from another site that sells them at a good price.

It's performed quite well and is very flexible. I have painted 3 rooms in my house as well as painted some furniture. Also, I have tested some water-based lacquer and it performed very well.

This is a great gun to buy especially if you already have a compressor. There are reviews on the internet (if you search you can find them) detailing successes using this gun with pancake compressors.

I am surprised and disappointed that Amazon is clearing this gun out given how well it performs. Not to worry if you buy one, there are other sites that sell this gun and numerous parts and extra projector sets. Just do a thorough search and you will find it.

Read Best Reviews of Wagner Power Products 276124 Conversion Gun Here

I just finished spraying a door with latex which is tough to spray even in the best of circumstances. Once I worked out the settings, the gun sprays nicely and evenly. The gun leaked at the packing seal out of the box and dropped blobs of paint on my door before I noticed the leak. The manual if you want to call it that is horrible. No advice on adjustments depending on material being spray, just a parts diagram and some crummy directions on how to hold the gun level. I'm used to spraying Acrylics and lacquers with my old Binks 62 so I know how to use a gun, I just need some advice on spraying with the HLVP process which is a bit different than the "old" days. The quality of the gun is good and it appears to be well made. It's a shame that Wagner did not put a bit more into the customer service side and include a decent manual.

Want Wagner Power Products 276124 Conversion Gun Discount?

Being my first HVLP gun I was quite pleased. For my first project I painted 6 chairs and 1 patio table with only 1 quart of black Rustoleum paint. That is how impressive the lack of over spray is on this gun. I used 15% Acetone in the paint and found the best way of measuring is to purchase some cheap semi-transparent measuring containers at your local hardware store.

Cleanup was a breeze as per the directions, just remember to spray the gun out in something like a trashcan.

Some pointers:

Even with the small amount of over spray, wear a mask. I didn't at first and after a good sneeze found black paint coming out of my nose. It may seem like common sense but it is something that is easily over looked.

The only problem I had with the gun is easily picked up in the instructions. There is a seal on the top of the paint canister that after some time of getting moisture will swell to get an airtight fit. When I was cleaning the gun with Acetone, the enlarged seal prevented me from properly locking the canister to the gun. Not noticing my mistake, I picked the gun up and the canister fell to the floor dumping the contents. Yes it was a mess to clean up, but a lesson well learned. The engineering could of been better on this aspect so beware.

Also when cleaning, take the needle valve out easier by pulling the trigger to send it out the back of the gun.

great gun! by removing the supplied regulator and attaching the quick connect fitting from your turbine gun you have the capspray titan II at half the price. save yourself the money and go this way.

WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer

• 18-gauge brad nailer fires brads 3/4 to 2 inches in length
• Operates at 60-100 psi with a 1/4-inch NPT air inlet fitting
• Rubber-wrapped handle; quick-release for jam-clearing; aluminum body
• Magazine holds 100 brads; includes oil, wrenches, and custom case
• Tool weighs 5.4 pounds

I had read the reviews so i went ahead and purchased this for about 35.00 shipped. I got it in the mail and opened it up.The case seemed very cheap. Now i pull out the nailer, It seems like WEN didnt pay much attention to the details. Some of the paint looked touched up, the trigger was just a piece of metal and some of the other pieces of the gun looked of questionable quality.This doesnt look even close to the beautiful, yellow, quality DeWalt that my buddy loans me.So nervously i hook it up and put in a stack of 1 3/4" nails, they loaded nicely. I test the gun on a 2x4.I tap a couple in and the nails go so deep i thought it misfired. So i turn the little depth wheel under the tip,(which feels kind of cheap but actually works better than the dewalt) and tap a couple more till perfect. I start laying some base board and the gun has a very smooth and solid yet lighweight feel to it. Not one misfire. Also the gun doesnt jump around. and the tip looks like it would destroy the board but actually did very well. I finished the kitchen and hallway and am very impressed with the gun. I have used a DeWalt to baseboard and trim two entire houses, and comparing the two I actually think the WEN performs better. I have only shot a couple of hundred nails out of the WEN so I will have to see how it holds up. but for 35.00 I could buy a few of these at the cost of the others. It's even starting to look prettier than the DeWalt.

Buy WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Now

This nail gun is a good value, and seems well made. It works well when you use the right kind of nails, which, as the descriptions says, is 18 gauge, from 3/4 to 2 inches.

Unfortunately, the standards for nails are such that not all 2 inch nails will work with this gun, because believe it or not, 2 inch nails come in two different lengths. I have never found actual 2 inch nails: they are either a bit longer (51mm), like Porter Cable and many other brands, or a bit shorter (50mm), such as Bostich. Only the 50 mm nailes (such as Bostich) fit; 51 mm (like Porter Cable) does not; I have tried both brands.

This is unfortunate, because the 51mm type is more readily available, for example at Home Depot. I had to do a lot of looking around to find 2 inch nails that would work with this gun, but I did eventually find a store (a lumber yard) that carried the Bostich brand. It is obvious when the nail won't work: you simply cannot load it.

I bought this gun to be able to shoot 2 inch nails. It would have been a very simple engineering change to support both 50 and 51 mm nails. Therefore I am taking a star off for not supporting the commonly available 51mm size. I wish also that it would accept 5/8" nails. It actually might, but I'm not going to buy a package to find out that they don't work, or worse, that they jam the machine.

If you are considering this gun and want to use 2 inch nails, be sure a local store carries them before you buy it.

Read Best Reviews of WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Here

This is a Pneumatic tool meaning you need at least a very tiny air compressor to run this. The tiniest 120 volt portable air compressors will run these, most of the very cheap small air compressors are less than $100. If you don't own an air compressor, I will tell you it's a safe investment. They last for 20 years or more, I bought one 14 years ago, and have never changed the oil or done anything. If you want it to last forever, get an "oil" air compressor not an "oil free." They cost about more, but they last forever. As for the size, just go with the largest one you can afford, and make sure it's portable, and something that you can haul in your vehicle if you need to take it somewhere for a project.

About the 18 gauge brad nailers:

I purchased a Harbor Freight 18 gauge brad nailer. I was very happy with the performance, but I noticed that the rear latch was made of soft plastic. If you dropped it once it would shatter the rear latching mechanism into bits. I returned it and got my $32 back (after tax). I went to all the major websites, Home Depot, Sears, Lowes, but Amazon had lower prices on all the different models of air nailers. I have been a mechanic and carpenter for 16 years. I built my own air compressor when I was a kid, so I have a very good understanding of air tools, and tools in general. I have not tried the WEN yet, as I just ordered it. But here are some selling points.

1.) The Dewalt has a lot of bad reviews about it jamming

2.) The Harbor Freight nailer spits a lot of oil out and can be messy, and had no power adjustment. It is also made of soft cheap plastic.

3.) The NuMax looks good, and will work fine, although it has no power adjustment, and no quick release to take the front apart to clear out jams. If you get a jam, it will take 5 minutes to fix it, instead of 1 minute.

4.) The Hitachi looks poorly made, the rear latch mechanism doesn't look like it's made out of metal, and the tool is ugly! But this is just my opinion, more research is needed to see if the rear latch is made of soft plastic.

5.) The other brands, Porter Cable, Campbell Hausfield, etc, are too expensive.

6.) The WEN has

A.) Depth adjustment. This is important because a normal brad nailer set at full power at 120 psi will blast a nail so far into the wood that you won't ever see it again. You need either to regulate the pressure down to 70 psi or maybe even lower for some very soft woods, or some type of power adjustment on the tool. The Wen has this adjustment capability so you can use it without turning your pressure way down at the air compressor. Most air compressors come with a factory air regulator, so it's not the end of the world if your air tool has no adjustments. It will still work fine without them. But I wanted the convenience of not adjusting the air pressure all the time.

B.) The WEN has a quick release to remove the front piece to clear out jammed nails.

C.) The WEN has a METAL latch on the back, and it's on the side of the tool, not sticking straight out the back like some. This means you would have to try really hard to damage the rear latch mechanism, and it looks about 10 times stronger than the Harbor Freight tool I returned which was only $13 less.

D.) Good reviews, no jams.

Now if you purchase the Wen and want to use 2" brads, use Bostich brand only, as they are the correct length.

I will post more after I've received and used the tool for a few months.

March 24, 2013

I've now owned the tool for 1 year. I have built many things with it, I have never had a single jam. My original review still stands. I have used the longest nails you can possibly use in this tool, the 2 inch nails, and it drives them in with power to spare and leaves a tiny pin head print, without damaging the surrounding wood, unlike the cheap staple/brad nail combo guns which leave the very large chunk out of the wood from the staple driver head, this WEN only leaves a tiny, tiny dent in the wood, which is not really noticeable, so it is good for finish work, and the adjustment for depth does work perfect, so you can protect "over driving" the head into the work piece for fine finish work, but it will take a couple test shots to see how much depth you want.

I noticed when driving the 2" nails, it has more than enough power, and doesn't jam, although using such a long nail is much stronger, it is difficult to drive them straight because any angle at all will be amplified when attaching two thin 1/2" pieces of plywood together using an excessively long brad nail (2 inches), which doesn't leave much room for error. I still enjoy using the 2" brad nails that I bought from Harbor Freight which work perfect in this gun, because they are stronger than the shorter ones, although I don't feel that it's necessary.

Notes:

1.) Oil can shoot out of this gun from the top vent onto your work piece. That's the only disadvantage I've seen so far. However, you can turn the vent to the side and it will blow away from your work piece, rather than on top of it, so that's something that is up to the user to control. Also you could very easily put a small rag on top of this WEN brad nailer to cover the exhaust port when doing ultra fine finish work to protect 100% from oil. However, I built several boxes with fine oak veneer plywood and during that time with 60 brad nails I only had oil fall on the wood 1 time (and it easily sanded off) because I wasn't paying attention to the direction of the vent on top.

2.) I love love this brad nailer. The handle is super comfortable. I've never owned a nailer, although I've owned over 30 air tools, this one has a quality feel to it, it's not very heavy, but not plastic and cheap either.

3.) Pressure does need to be reduced below 120-90 psi for ideal results, because you don't need full pressure, even with 2" inch brad nails this gun has more than adequate power to get the job done, so either use the limiter on the tool for depth, or reduce the pressure. I found that reducing the pressure down to about 60 psi was all that I needed to do to get perfect depth control without changing any settings on the tool. Your results will vary. Most air compressors have a small black control knob near the tank, with an output pressure gauge, this is so you can reduce the pressure for nail guns, and paint gun.

The case is not very well made, but the tool its self is very high quality. Overall, after 1 year I'm extremely happy and would never trade this tool for anything. Well worth the investment.

Want WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Discount?

This brad nailer works very well. The tip can mark your surface, so be careful. No problems with jamming. Feels and performs like an expensive nailer. Would recommend to anyone who needs a brad nailer.

I've never used a brad nailer before. However, I wanted a way to quickly/easily re-attach all of the baseboard throughout my house (I removed it to install tile floors) and this brad nailer worked great! I paid around $35 shipped and a comparable 18 gauge 2" brad nailer at the big box warehouses sells for $70 and up!