GOODYEAR 46546 3/8-Inch by 100-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restric

• Solid Brass End Fittings: 1/4-Inch MNPT
• Spiral Synthetic Yarn Reinforcement
• Abrasion-Resistant Rubber Outer Jacket
• Bend Restrictors Prevent Kinks Near End Fittings
• 100% Made and Assembled in the USA

So far so good. I replaced another air hose that was supplied with a Neiko 100 foot reel. That hose deteriorated and began to leak around the brass fitting. That hose was cracking and becoming hard and brittle and had to be replaced. The new hose is very flexible even in cold weather. So far it is performing well. Only time will tell I suppose.

Save 54% Off

Q Industries HV40A2 SuperFlow Portable Air Compressor with LED Light

• Inflate a tire in less than 3 minutes
• 150 psi Air compressor
• Ideal for trucks and medium size vehicles
• Carrying Bag included
• LED Light attached on back

Updating review.

It's now May 2012 and the pump is still running like a champ.

Keep in mind I don't use it that often, just once or twice a month.

Plug has held together. I do wish it had a longer cord or hose, but it reaches

every tire I've used it on so far.

--------

Ok.. I didn't get this from Amazon. I got it from Steve's Tools for about 5$ more.

Needed it now because my old crappy $15 pump finally died.

Pros.

Real smooth and well balanced. This thing doesn't jump around at all.

Fill speed is good, but not for large tires.

For those get the version that clamps to battery terminals.

This one topped off my P255-75R15 in decent time.

However, filling up my 60PSI doughnut spare took a while.

I don't think there is much head space for the higher pressures.

This is where the screw-on air chuck was useful.

The pressure gauge actually works and is accurate.

The switches are separate for pump and LED lights.

The handle is actually a metal heat shield for the output.

Run this pump for a while airing up a 60 PSI spare and you

will understand why it needs a heat shield.

The unit comes with a bag. Not the highest quality but

sufficient for storing the pump and a few other odds and ends.

Cons.

The screw-on air chuck can be a pain, but just overfill a bit before taking it off.

The air hose is adequate for reaching front and back tires on one side,

but you have to move the pump from one side of the vehicle to the other.

The LED lamps aren't that bright, and the blinkers are only three white LEDs.

You have to put in a red filter. They should have been red LEDs.

I'm reserving comment on the lighter connector. Looks a bit cheap compared to the

rest of this unit.

All in all I'm happy.

Buy Q Industries HV40A2 SuperFlow Portable Air Compressor with LED Light Now

Honestly, I was impressed with this compressor when I first opened the box and the first 2 or 3 minutes it ran...

The price wasn't bad but this compressor sucks. If you just need one to fill tires you'd be better off with one of those pieces of crap autozone sells.

To begin with the connecting rod for the piston won't stay attached to the counterweight that mounts to the motor shaft. On top of that the counterweight won't stay attached to the shaft either. After breaking about 90psi with this thing the connecting rod and/or counterweight comes free and just bangs around inside the plastic cover.

I have machined out both pieces to keep them from slipping but the "seal" on the piston is shot and it will no longer break 80psi.

Small example of the crap construction...the motor shaft has a flat spot on it and the counterweight slides over that. But these idiots put the set screw on the round side of the shaft...and they use an e-clip to hold the connecting rod on. (it flies off).

crap crap crap, don't buy this thing unless you need a shiny red door stop.

Read Best Reviews of Q Industries HV40A2 SuperFlow Portable Air Compressor with LED Light Here

The unit operates as advertised. It is light weight, very portable and inflates SUV, car and bike tires very quickly. The problem I am having is with the screw on hose connection to the tire's valve stem. I am never (and I mean never) able to screw the end of the air hose onto any SUV, car or bike tire's valve stem. It simply won't screw on. I therefore need to manually hold the end of the hose onto the valve stem to inflate a tire. I need to hold it in the exact proper position or the air will quickly leak out of the tire. Frustrating to say the least. There have been times when I thought the tire was inflating to find out that I didn't have it in the proper position and the tire was actually deflating.

I just sent an email to Q Industries to find out if the "Optional clip on tire valve inflator extension" that Q Industries sells on their website for $5, will work with the HV402A that I purchased. If this won't work, I am hoping they can provide another alternative.

If they don't make a different adapter or hose for this unit that actually works, I will need to deem the HV402A useless and find another portable air compressor. And that's a shame considering I spent $50 to buy this unit and it's only a few months old.

Want Q Industries HV40A2 SuperFlow Portable Air Compressor with LED Light Discount?

The second time I used the compressor it stopped functioning properly. I am now trying to return it and will not buy another. I received a replacement unit for free, it was also defective, I received a third unit free and have been using it every since. It works great. The customer service was excellent!! I wouldn't hesitate to buy a replacement.

Save 22% Off

I've been using to inflate my slowly leaking tires through the winter. It's kinda slow but gets the job done. LED light comes in handy.

12 Ton Air Hydraulic Jack

I was impressed when I received this unit.

It is hard to beat the price, and, especially the shipping costs. The shipping costs from this supplier are really reasonable. The unit performs, and does a decent job for the money.

The positive features include:

(1) You can use a wide range of pressures to operate it. The specs say that it operates between .7 MPa and 1.0 MPa. (MPa = megapascals (which is a clue that this is made in China) (1 MPa is about 145 psi, so, this unit operates between 100 psi and 145 psi)). This is important if you have a compressor that has a maximum working pressure of about 110 psi (most units for consumers are about 100 120 psi max.)

(2) It has a quick release couple, already on the unit, right next to the valve. It may only save a few bucks, but, it is one less thing you have to do to make the unit operational. I use a three outlet manifold on my compressor so that I always have a hose free with a female quick couple. This attaches nicely, and, the valve is right on the couple so you can pop it in and immediately begin pressurizing the jack. This is important if you are under a 3 ton vehicle and you want to move, and "fuss" around, as little as possible until you have it solidly on jack stands.

(3) The welds are tight and clean. They aren't the best quality, but, they aren't the worst either. (I've seen some junk come out of China that looked like my five year old had welded it for his art class in kindergarten. The welding on this unit doesn't qualify for freeform art. It's professional).

(4) It has a small pneumatic tank (which is an important feature for an air bottle jack). The tank insures a reserve supply pressure to the hydraulics in case a microscopic leak developes under pressure). This is not only a professional design feature, it is also a safety feature. It is less likely, with a pneumatic reservce, that the jack will fail.

(5) The hose ends are well protected with a spring cage and reinforcements.

All in all, if you just need a casual jack for boosting an SUV or ATV in the garage, this unit gives you the best bang for the buck.

Save 68% Off

Grex GXPS-475 Private Stock Primary Color Set

• Private Stock is a revolutionary and evolutionary paint system - made from a blend of acrylics designed and formulated for performance to give you full control on every surface imaginable
• Private Stock can be used on all materials, ranging from illustration boards to textiles, wood, leather, glass, metals and plastics that include HDPE, PVC, PET, LEXAN and Polycarbonate.
• Private Stock water-based, non-toxic and conforms to ASTM D4236 compliance standards.
• All colors are extremely light fast representing the highest ratings without requiring health or precautionary labeling, which makes them more fade resistant - ideal for many outdoor applications like custom painting, textiles etc
• Private Stock is precision manufactured for accurate and repeatable mixing of an infinite color spectrum

I got this items shipped yesterday I LOVE IT! It is good price so many stores cost them like $40-$50 buck! They are great colors to use for airbrush designs & deffy will buy more if I need more. Thank you

Buy Grex GXPS-475 Private Stock Primary Color Set Now

THis is by far the best acrylic paint I have airbrushed or used with pinstripe brush. Was told it was the best,it is.

Read Best Reviews of Grex GXPS-475 Private Stock Primary Color Set Here

It's a very nice product, it came in just in time for my airbrush class, I as very impressed with the how expedient they were about getting the paints to me. And they were very affordable.

TEKTON 4730 3-Way Air Hose Splitter Manifold, 1/4" NPT

• Conveniently Use up to Three Air Tools and Accessories at the Same Time by Splitting Air Source
• Constructed from Rugged and Heavy-duty Solid Brass
• Specifications: 1/4-Inch NPT (F) Inlet; 1/4-Inch NPT (F) Outlets
• 90 Day Guarantee

Description is wrong, picture is correct. There are no mounting holes. Also, the three outlets are too close together. Threading things into two adjacent holes means one or the other will not go in fully. You just have to use a little extra tape/sealant on whichever won't thread in.

That said, I was able to (carefully) drill two small mounting holes right along the outside edge without penetrating the inner wall. Extra teflon tape around the threads is my workaround for the outlets being too close together. So I was able to make it work.

Buy TEKTON 4730 3-Way Air Hose Splitter Manifold, 1/4" NPT Now

Holes are to close together but other then that it works gr8 ... I would recommend looking for something else but I was stupid enough to buy this LOL ..