Ingersoll Rand P1IU-A9 Hand Carry Twinstack 2-HP Compressor

• Two-horsepower motor
• 135 max PSI
• Capacity at 90 PSI 4.3 CFM
• Capacity at 135 PSI 3.2 CFM
• 115 volts and15 amps

I am no stranger to IR compressors as I have purchase many over the years used for large production facility applications. My experience using them and their reputation in the field solidifies in my mind that they are at the top of their game, the best of the best. When it came time to replace my portable compressor, I found this twin stack unit (model P1IU-A9), and decided to give it a try.

Box arrived on promised date (thanks Amazon) but with a few war wounds, which translated into a few scratches on the tanks; not enough to return the unit. Was pleasantly surprised at the quality of all the hardware. Everything seems to be extra heavy duty which of course translates into weight. She is quite heavy but not to the point that it is not portable. I will probably dedicate a dolly or cart to facilitate rolling it around.

It came with an air filter that looks more like it was designed for dessert conditions (very well designed). Stainless steel braded line leading from compressor to tank (not visible in pictures), quality brass fittings and copper lines. All plumbing seemed to be properly assembled. Nice fit and finish.

When I fired it up, I was pleasantly surprised. It seemed to be half as loud as my previous (Campbell and Hausfeld) compressor. I also noticed it had low vibration. Previous compressor vibrated quite violently.

Tank fills quickly and consistently and comes with a brass ball-valve drain.

Negatives:

A little upset about the paint on the tanks getting scratched from shipping, but I got over it.

Weight maybe too heavy for someone with a bad back (approx. 80 lbs.)

Manifold assembly (gauges, regulator, connections) was not centered with cut-outs in front panel. Easy to adjust.

Gauges, as many have said, are poor. They are hard to read (small print). I had to get down on my hands and knees to read the pressure. On the bright side, at least they would be very easy to change out if I decided to do so in the future.

All in all, very pleased with the purchase. I am a value hound and this is one of the best values I have run across in a long time. Built like a tank.

Update: Owned a little more than one year now. Completed several large projects (2,000 SF of solid wood flooring, built-in bookshelves, major trimwork, etc...). Unit still works like it did on day one. I love this compressor. I do caution everyone that it is a little heavy. Maybe I'm getting old (or need to work out more). This thing is built like tools used to be built. Will last a life-time.

Buy Ingersoll Rand P1IU-A9 Hand Carry Twinstack 2-HP Compressor Now

I purchased this from Northern Tool when they had free delivery for nearly all IR products. It was also much cheaper than the price listed on Amazon at the time of this review.

I have used this mainly for minor automotive use such as: filling tires and removing some bolts with a cheapo (read: air hog) Campbell Hausfeld air wrench. I have also used it with a blower to clean out my garage. Doesn't necessarily keep up with the blower nozzle, as I expected, but with a short break (10-15 seconds) it gets back up to pressure and I can continue. No problems powering the air wrench, but the bolts I was removing weren't on too bad.

It's a fairly quiet compressor, with the loudest noise coming from the connectors rattling, not the compressor itself. I would like to add one 3/8" connector but I'm wondering if I need to make the cover holes larger so it can fit. Overall it seems to be a high quality unit that can handle most DIY tasks without taking up too much space. I wouldn't recommend this for an avid grease monkey, but for minor automotive tasks it should be fine. It should also be able to run a couple framing nailers simultaneously without much of a sweat. Compared to other compressors of this style/size this compressor is quite competitive. Also check out the Senco compressor for similar performance.

Read Best Reviews of Ingersoll Rand P1IU-A9 Hand Carry Twinstack 2-HP Compressor Here

I can echo the other reviews, this is a quality tool at a very affordable price. It should last a LONG time.

Cons:

Pretty heavy.

Both pressure gauges were crushed when I pulled it out of the package.

Tweeners:

It's not too loud, approx 80db. Of course you would like it to be silent but you can talk while in the same room.

Pros:

Pressures up fast.

Well protected, only potential problem is the plastic air filter sticking out.

1/4 turn air bleeder is nice.

Excellent Customer Service! I called to see about getting replacement gauges and in less than 5 minutes they apologized for the problems, and had two new gauges headed my way via Next-Day Air.

I personally don't see the need for the Ashcroft gauges. The gauges, no matter how cheap they are, are very well protected and I can't see them failing agin. It was only a result of getting banged when they were assembling the compressor that they were damaged. For me saving $30 and getting the gauges quicker through a five minute warranty claim seems like the way to go!

**************************

Update May 12,2011

Ingersol Rand came through on the the replacement gauges. The morning after calling them I had FedEx on my door with an "Emergency" overnight delivery. The gauges were in good shape and I promptly installed them.

Tip for gauge replacement: Remove the two quick connect air fittings, screw off the regulator handle, then unscrew the portion of the regulator poking through the faceplate. After these are off you can remove the two screws holding the manifold assembly in place, slide it out and replace the gauges.

Want Ingersoll Rand P1IU-A9 Hand Carry Twinstack 2-HP Compressor Discount?

So for under $300 you get a workhorse that ready to go nearly right out of the box!!! When I was looking at compressors all of my friends said, "Ah just get your self a pancake compressor or something..." I am SO glad I didn't listen. This compressr doesn't take up much more space than a pancake and is ten times the value!!!

Why to buy this over other compressors...

-First, it's an oil operated unit which means it's quiet and will last much longer than typical units. Quiet is a realative term mind you, it's still pretty loud but if you've ever stood next to a non-oiled unit you'll understand why I appritiate this and call it quiet. As I said, this unit if maintained should last many years.

-Capacity...okay this is a small compressor, but that's probably what your looking for. Larger units cost considerably more and weight a ton! This unit weights in at 79 lbs which while isn't fun to lug around is still do-able. I take it to where I keep my travel trailer stored and air up the tires about ever two months. It's a 4 gal capacity which really isn't all that important unless you're running a large volume tool. In any case, this isn't build for running "continuous flow tools" like grinders and sand blasters. However it's worked flawlessly with my pnematic nailers even when I've been in "burst mode". One more word about capacity...motor output and in turn CFM determine a compressors capability. Larger tank capasity does not instantly translate to more CFM.

-Motor...this is a 2HP motor which one of these days I will measure the amperage on. Don't be fooled by off brands that claim rediclous HP numbers. If it's a 15-20A 120V compressor (or any appliance for that matter) the best you can hope for is around 2 HP. I won't get into the physics but that's the limit. If you're curious as to why, a quick google search should solve the mystery. If you legitimately need more HP and more CFM, you're going to have to look at 240V models and shell out a lot more $$$. By comparison a 240V 3HP Ingersoll Rand 8 gal "wheel barrel" compressor is in the $750 range and weights close to 200 lbs. So this is for the DIYers and contractors that run nailers, staplers, perhaps low volume paint sprayers (but that's questionable.)

-Duty cycle & CFM... One thing that sold me on this unit is it has 100% duty cycle. Most compressors in this size range are not. They need time to cool down so they don't overheat. This being a oiled unit stays cool enough to run continously or so claims IR. The CFM rating at 90 psi is 4.3 so that gives quite a bit of output. I've even considered trying an impact gun. I know it wouldn't run continously but for busting lugs I'm curious to see if it would work. If and when I try it I'll update. Also as I mensioned above, the market is now flooded with high volume low pressure sprayers. So since CFM increases as psi decreases this unit may have enough power to run a HVLP sprayer. I do intend to try this and will update when I do. Back to duty cycle, according to IR, if your running a tool that runs on 4 CFM at 90 psi, it should be able to run contiuously on this compressor. But this could also be a good tool for a group of contractors running several smaller tools at the same time such as nailers.

-Features... On the face of the unit is your instruments and connections. A typical two gauge readout and regulator. Plus two quick disconnectos. So two guys can work of this one unit without any additional manifolds. Nice touch IR!!! After that it's pretty basic.

-Durability... Well built! The instruments built into a steel plate as seen in the photo. Around which a 1" square steel tube makes the face rigid and protects it from the inevitable jobsite reality of something getting dropped on it. The tank and carry handles are welded and feel rock solid. And the motor and compressor block are sandwitched in between for maximum protection. It's a well thought out design that protects itself. The plate the motor is bolted to has a rubber seal under it to absorb vibration and protect the instruments. The four feet are also rubber so it doesn't vibrate it's way across the room.

A couple of downsides...

-In the box you get a bottle of starter oil and an air filter. However once it comes time to replace them, they are hard to find. The compressor will run on synthetic motor oil (check your instructions for what type) however if I recall correctly I think it voids your warrenty. IR does bottle their own oil (I'm running All Season Select) however it doesn't give an ammount to put in. So you have to fill it and check it with the dip stick. I still haven't found a replacement air filter...I think at this point the only option left is to contact IR directly.

-20A or 15A... The instructions say to run this compressor on a 20A circuit. Presumably since during startup the compressor motor will spike above 15A momentarily. I've read some reviews where people said they've run these on 15A circuits without issue, but I wouldn't bank on that. Before you buy, check and see if you have a 20A outlet somewhere to run this on.

Save 16% Off

I'm one of those guys who over-analyzes EVERY purchase, and this compressor wasn't any different. The price from Amazon can't be beat, and the free shipping took only 2 days! It handles my Hitachi framing nailer and Hitachi sheathing stapler simultaneously with ease!

I can not say enough about this compressor, though upon arrival I wanted to throw it off the bridge! Long story short, like several other reviewers, when the compressor arrived, BOTH gauges were crushed! Smashed not by UPS but by Ingersoll Rand when the compressor was assembled. Whoever the mule was who dropped in the motor/compressor unit hit the gauges from the top, bending both cases and gauge faces. Not immediately evident, I started adjusting the pressure switche before I got a flashlight and got down on my knees and saw the damage. I considered calling I-R to get new gauges but then realized that they'd just send the same $4 pieces of junk as originally installed. I decided to get a pair of "Ashcroft 200900 1.5 Lower 0/200 Pressure Gauge" from MSC through Amazon ($14 each). Once I get those in, I'll be golden! I've been using it with gauges connected with hoses 'til then and am very, very happy. Even if your gauges come unbroken, replace them anyway.

O Ring Kit

• ORK1 O-RING KIT
• O-RING KIT

I did have to assemble the unit twice to fix the problem but I won't complain. Instructions were clear and parts worked. I think more grease was needed (fixed the problem on the second try). Happy to keep a good nailer in service since my older unit is better made than many of the new ones.

Buy O Ring Kit Now

This was exactly what I wanted. It was the right kit for my air nailer. Unfortunately it didn't solve the problem, but that's another story.

Read Best Reviews of O Ring Kit Here

Lot of money for what it is but works. Item was shipped fast and packaged good and included instructions. would have given it a five had it not been for the price.

Want O Ring Kit Discount?

The kit works exactly as it says. It was easy to replace on my finish nailer, and now the gun works as though it were practically brand new, and it's a 15 year old gun.

Save 24% Off

The kit provides easy to follow instructions on how to disassemble the nailer and install the new orings and seals. The nailer work like new.

Grex GXPS-475 Private Stock Primary Color Set

• Private Stock is a revolutionary and evolutionary paint system - made from a blend of acrylics designed and formulated for performance to give you full control on every surface imaginable
• Private Stock can be used on all materials, ranging from illustration boards to textiles, wood, leather, glass, metals and plastics that include HDPE, PVC, PET, LEXAN and Polycarbonate.
• Private Stock water-based, non-toxic and conforms to ASTM D4236 compliance standards.
• All colors are extremely light fast representing the highest ratings without requiring health or precautionary labeling, which makes them more fade resistant - ideal for many outdoor applications like custom painting, textiles etc
• Private Stock is precision manufactured for accurate and repeatable mixing of an infinite color spectrum

I got this items shipped yesterday I LOVE IT! It is good price so many stores cost them like $40-$50 buck! They are great colors to use for airbrush designs & deffy will buy more if I need more. Thank you

Buy Grex GXPS-475 Private Stock Primary Color Set Now

THis is by far the best acrylic paint I have airbrushed or used with pinstripe brush. Was told it was the best,it is.

Read Best Reviews of Grex GXPS-475 Private Stock Primary Color Set Here

It's a very nice product, it came in just in time for my airbrush class, I as very impressed with the how expedient they were about getting the paints to me. And they were very affordable.

Solberg FS-04-038, Miniature Filter Silencer/Breather for Compressors & Blowers, 3/8" MPT,

• Increase lifespan of equipment
• Reduce noise levels
• Decrease maintenance costs

This size filter is adequate for a 6 gallon compressor.

The next size up will also fit.

The filter media is replaceable and the supplier shipped quickly.

MARSHALLTOWN The Premier Line E400 The Enforcer Portable Texture Sprayer

• 2.5 Gallon Capacity
• One Air Hose from any Compressor Pressurizes both the Tank & Hopper Gun
• Piston Seal Cleans Inner Tank Walls
• Move from Job-to-Job without Clean Up
• Efficiently Refill using a Mud Pump

I like this overall. We only use it for patch and remodel work now. It really shines texturing closets, stairwells, small bathrooms and odd shapes where a hopper gun is difficult to use.

After texturing four whole houses, seven remodels and dozens of patches, we have figured out the few bugs. It is very sensitive to air pressure and flow. We also had the gun start leaking mud all over the operators hand the second time we used it. We took the gun apart, cleaned it, put it back together with new RTV silicone and it works great now. You have to make sure that the selected nozzle size is centered over the outlet hole on the gun or the pattern and size of the texture is negatively affected. You also want to stop and refill it before it runs out or it will shoot a few big globs of mud right as the tank runs dry.

One thing you have to do is keep the lid really clean, any buildup of mud and you can't get the lid off without a hammer and prybar.

Buy MARSHALLTOWN The Premier Line E400 The Enforcer Portable Texture Sprayer Now

Initial tests indicate the Marshalltown E400 Enforcer will do the texturing work that I expected of it and it appears to be a well designed and manufactured piece of equipment. However, what you really need to know, ahead of time, is that the compressor used to drive it must, at a minimum, deliver 5.0 CFM at 40 PSI. This information was only available on a 2" by 1" sticker appended, seemingly, as an afterthought, to the front cover of the Enforcer Instruction Manual that shipped with the product. Compressors with such output are typically bulky twin tank units in the $275 to $375 and up price range. A pancake-style compressor delivering around 3.7 CFM at 40 PSI does not meet the minimum requirement to drive the E400. However, ganging two pancake units through a "Y" manifold with inline check (non-return) valves on the "Y" for the feeds from the compressors and setting each compressor's regulator to the same output pressure, is a potential workaround, if you know what you are doing (but not for dummies).

Campbell Hausfeld CHG00100AV 1-1/4-Inch 2-in-1 Brad Nailer/Stapler Kit

• Ideal for upholstery, installing trim, installing chair rail and crown molding, building crafts such as picture frames and birdhouses
• Drives both 18-gauge brad nails and 1/4-Inch crown staples, 3/8-Inch to 1-1/4-Inch length
• Easy maintenance with included oil bottle
• Includes starter fasteners
• Includes blow molded storage case

Garbage....Arrived DOA....Ordered unit for an upcoming project. Connected it to the compressor and immediately heard air leaking from the front of unit. Tried to use the nailer and it would not fire. I am now 31 days past my order date and can not return to Amazon. Will try to contact the manufacturer regarding warranty.

Buy Campbell Hausfeld CHG00100AV 1-1/4-Inch 2-in-1 Brad Nailer/Stapler Kit Now

I purchased this to use on a couple of custom end tables I was building for my 5th wheel trailer. It worked flawless, so good in fact I went back and bought the 2" as well. This stapler is light weight and comfortable to handle. It fires true each and every time and what a bargin at this price. I couldn't be happier and would highly recommend this to anyone. Happy nailing !

Read Best Reviews of Campbell Hausfeld CHG00100AV 1-1/4-Inch 2-in-1 Brad Nailer/Stapler Kit Here

I had to buy this at my local Lowe's store because I needed it that day. The Gun works excellent and come with 1" nails,staples,oil,three Allen wrenches & a case. I went threw three rows of nails and the gun worked perfectly and I completed the job without any problems. What a difference a nailer makes to give the job a professional look and save time. Great buy !

Want Campbell Hausfeld CHG00100AV 1-1/4-Inch 2-in-1 Brad Nailer/Stapler Kit Discount?

I used it a couple times, with staples and brad nails and both times I was pleasantly surprised at its ease and flawlesness of use. Would definately recommend it. Used with a tiny pancake 1 Gal compressor with reservations, but again great performance. I am trying to come with a reason to use it again!

Save 56% Off

First time owning an air nailer/stapler so not much to compare to, but it worked great for me. used it with my porter cable 6 gal pancake compressor to attach some wire fencing to my split rail fence (and in some areas directly to some trees too many roots for split rail fence). It sent 1 inch staples through with no problem with the compressor set at 100psi. felt very sturdy, comfortable, and like it could re-fire very quickly and go for a long time. Hard to find 1-1/4 inch staples at a good price.

DIAL MFG INC #1195 1100CFM Concentric Pump

• DIAL MFG INC #1195 1100CFM Concentric Pump
• DIAL MFG INC
• 140 degree F. (60 degree C.) maximum operating temperature
• Meets ASTM D-2466
• Conforms to NSF Standard 61

The Pump is a great replacement to my original stock pump and seems to be doing a great job thus far. Now for the negative part, the part was delivered over a week past the expected arrival date(and yes I acounted for buiness days only). When I treid contacting the seller via phone I was put on hold never pick up after that. I then used the email, they had responded fairly quickly however only gave me a link to track my package. Bottomline great product poor service, if you have 3+ weeks to wait for the product it is worth the price.

Save 29% Off

Makita A-90233 Bulb 2/Pkg

• Replacement bulb for the 14.4V ML140
• Replacement bulb for the 12V ML120
• 2-Pack

These worked like a charm in my craftsman flashlight and arrive in 2 days. I had to write six more words so here they are that requirement is crazy.

Buy Makita A-90233 Bulb 2/Pkg Now

I bought these bulb to replace the Dewalt 14.4 v Flashlight, they fit perpect and is little cheaper than the Dewalt brand replacment.

Read Best Reviews of Makita A-90233 Bulb 2/Pkg Here

much less expensive than the dewalt brand, seems to last just as long. I will buy them again. make sure and match up voltage!

Ingersoll-Rand 2130 1/2-Inch Heavy-Duty Air Impact Wrench

• Offers 550 feet-per-pound of maximum Torque
• Full stroke tease throttle
• Easy glide forward/ reverse switch
• Multi position power management
• Lightweight reinforced aluminum hammer case

I have been performing maintenance on the family cars since my dad died when I was fifteen. That makes over a quarter century of brakes jobs and tire rotations, removing and tightening lugs with a T wrench. A couple weeks ago, I bought a compressor; mainly to keep the tires inflated, but I couldn't resist sizing it at least marginally enough to run an impact wrench. Then I couldn't resist going ahead and getting the wrench. I worked a little overtime, made my order, and my Ingersoll-Rand 2130 was on the table when I got home from work this evening. I immediately went out to perform an overdue rotation on the Silverado. Those who've used impact wrenches regularly will laugh, but I was downright dumbfounded when the wrench tapped the lug nut a few times and spun the nut off in a fraction of a second. And the wrench hardly attempts to turn in your hand. Had I known an impact wrench would make life this easy, I would have invested in the wrench and compressor years ago.

I did some research before purchasing, reading a lot of reviews and comparing specs. I pretty much decided one was wasting his money going below about the $110 point. The other contender that would minimally meet my needs at the lowest price was the Ingersoll-Rand 231C 1/2-Inch Super Duty Air Impact Wrench. I'm sure I would have been happy with that, but moving up the 2130 seemed to be good value. For about $30 more you got a little more forward torque (500 ft-lbs. vs 350), a little more speed (9500 RPM vs 8000), about 2/3 the weight (~4 lbs. vs. 6) at very little additional air use (4.4 SCFM vs 4.2, however they measure that).

I was a bit concerned about my compressor being up to the wrench. It's a Sears Craftsman 20 gallon, 1.5 HP, 150 max. PSI rated at 3.8 SCFM at 90 PSI (however THEY measure that). A lot of experts would say it's not enough. Sears said it was fine for 1/2" impact wrenches and only appropriate for intermittent use with a 3/4" wrench. I did some math and took the risk. For performing a tire rotation, the compressor was every bit up to the task. I really can't imagine any job in which the wrench would be used so continuously to really tax the compressor. If you're a shade tree mechanic, this compressor had no problem with the wrench. In fact, I had almost completed the rotation when I realized that I had turned off the compressor earlier when my three-year-old came outside and was terrified by the compressor. I had done the job with only stored air, it was still holding 90 PSI, and I had noticed no reduction in the performance of the wrench.

I did not find any photos of the 2130 on the web that showed the rear the wrench. (I intend to post a photo or two in a the next few days) The red button in the side photo pushes left and right, choosing forward and backward. There is a five position toggle (at least on mine the manual says it's three) in the rear to choose the maximum power. The switch is labelled from 1 at the lowest setting to 2 at the highest setting. Go figure. Power is also continuously variably controlled with the trigger, and I have to say that it is a fabulous trigger with fantastic control of speed. I've never used a power tool with fine control like that. I was also amazed at how quiet it was. It certainly makes little noise when it's not hammering, and when it is, I don't believe the 100 dBa plus listed in the specs (on the verge of pain.) I also ordered the Ingersoll Rand SK4M14 1/2-Inch Drive 14-Piece Metric Standard Impact Socket Set. This appears to be a great value as well.

Time will tell how it holds up, but with my use, I expect it last a long time before requiring a rebuild. I can't speak for professional mechanics, but if you're a do-it-yourself mechanic, I don't believe you will go wrong with this wrench.

Oh yeah...while you're waiting for your new toy to come, get a bottle of air tool oil. None is included.

Buy Ingersoll-Rand 2130 1/2-Inch Heavy-Duty Air Impact Wrench Now

Tool is awesome. Not much you can say about an impact wrench as they do not do a lot but when you want it to do what it does it does it perfectly. Powerful, solid, compact and very lightweight as far as impact wrenches go. I have had impact wrenches before that the sockets fall off too easily but this one holds them real snug and has about as many features on it as you can fit on an impact wrench. There are many way more expensive wrenches out there but this one will stand tall next to all of them in the same performance class. Get it now.

Read Best Reviews of Ingersoll-Rand 2130 1/2-Inch Heavy-Duty Air Impact Wrench Here

I put this tool to good use right away to remove a 1 and 1/4 inch nut which was holding on the rear axle yoke on my 88 Chevy Pickup. I had tried to break it loose previously with a half inch breaker bar and couldn't budge it. I've never used an impact wrench before so I didn't know exactly what to expect, so I set my compressor at 85psi (manual says 90psi is max.) put the socket over the nut and pulled the trigger. About 5 seconds later the nut was off. I couldn't believe how easy it was. Putting the new yoke on was a bit tricky as you have to be careful not to damage the crush washer. I set the tool on the lowest setting and it was very easy to control with the trigger; I got it on with no problem. Next I needed to replace a brake caliper so I used it to pull off the front tire which was just plain fun. I'm just a shade tree mechanic but have found lots of uses for this tool. It's very useful and I couldn't have done some of the jobs I've done without it. I don't think you'll be disappointed if you decide to purchase it. I also purchased the Ingersoll Rand SK4H13L 1/2-Inch Drive 13-Piece SAE Deep Impact Socket Set to go with it as I was told that regular sockets would not hold up. These are great sockets, very hefty with easy to read markings (great for those with over 40 eyes).

Want Ingersoll-Rand 2130 1/2-Inch Heavy-Duty Air Impact Wrench Discount?

I purchased this impact wrench to replace a very old Craftsman hand me down which doesn't have adequate power. The wrench is finished in very nice composite body with the air ports at the handle of the wrench. Power setting is established with a dial on the rear of the unit. There is a direction switch just below the dial setting. The trigger is very responsive and has variable power delivery. It fits 1/2 inch impact sockets perfectly and has a design where it grips the socket so it doesn't fall off easily.

The very first time I used this was to loosen up axle nut on a 7 year old car driven in the Northern USA climate (salt + road grime). I would presume the torque delivery was very close to its maximum, but after 2-3 seconds of hammering, the axle nut came loose. Pretty impressive. I loosen up both side of the FWD axle in one minute. It saved me time, my back and possibly my knuckles if I would have it done manually with an extra long breaker bar.

The wrench has a very nice balance and is pretty lightweight for its size and torque delivery. Please adhere to its minimum air delivery and pressure (make sure your compressor is up to snuff). The wrench is not so quiet, but I usually use ear plugs around these things anyway. For the price + power delivery + quality of construction, I would comfortable rate it at 5 stars.

Save 48% Off

I've been using this with a Craftsman Pro 26gal compressor. I did some research and this impact wrench had good specs for the SCFM rating I could support. Just changed my timing belt last weekend and it was great for removing the wheel, motor mount, crankshaft pulley bolt etc. The IR is short enough that it fits into most places you'd expect to use an impact wrench. Also, it fits well in my hands and has a solid feel.

There are three power settings on the back. The counterclockwise rotation is full force regardless of the setting. With the middle setting, my lugnuts go on just a bit tighter than spec, so I actually avoid using a torque wrench when I use this.