Campbell Hausfeld FP209599AV 2-Gallon Mini Twin-Stack Air Compressor with 1 1/4-Inch 2-in-1 Brad Nai

• 2 gallon, oil-free air compressor
• 1-1/4-inch brad nailer/stapler combo gun
• Perfect for small projects
• All-inclusive kit to get started right out of the box
• Small and Compact for Easy Storage

I was tired of throwing money away on canned air so I bought this Campbell Hausfeld 2 Gallon Mini Twin-Stack Air Compressor. A lot of people thought I was nuts, but then let's do the math....a can of air nowadays costs roughly $6 and I go through at least one a week times that by 52 weeks and you have $312. So in about five months time this compressor will have paid for itself.

The included nail/stapler gun does an excellent job. Just keep in mind that the gun which comes with this compressor is a simple brad nailer fit for doing jobs such as hanging thin sheets of paneling. The step up from that would be a finish nailer, which you would use that for nailing molding. The step above that would be a framing nailer and those are usually 3 ¼-inch nails for framing. For the finish and framing nailer you would need a much larger compressor to operate efficiently.

This compressor is best suited for small jobs. For instance, it excelled at inflating my dad's car tires and my brother's bike tires (set at 60 PSI) and the compressor only kicked on once or twice. However, when using it to blow air (set at 85 PSI) it only lasts about thirty seconds or so, then I have to wait about five minutes for it to fill back up. This does not bother me for like I said one can of air is about $6 and so waiting for five minutes for the tank to refill with free air is no biggie.

Something else to keep in mind if you're thinking of purchasing this compressor is to make sure you buy some extra fittings (and a roll of Teflon tape for wrapping the threads). The compressor comes with a few extras, but they're nothing to get excited about. For instance with the included inflation nozzle I added a 1/4" male coupler connector and a quick connector on one end of the hose so I can snap it on and off easily.

You will also need to buy a blow gun (Campbell Hausfeld MP520010AV 25-Piece Accessory Kit with Case) and it's a good idea to have a moisture filter to prevent water in the line (Campbell Hausfeld G6261 Water Filter). I bought a CH filter and installed it on the air outlet on the tank (using a 3/8" x 3/8" male coupling) and then hooked my hose to the other end. You can use quick couplings to make life easier for yourself, that way you can interchange hoses and tools in a snap.

All in all I am very happy with this purchase. The compressor runs smoothly. It's good looking. And it's not very loud. What more can you ask?

Buy Campbell Hausfeld FP209599AV 2-Gallon Mini Twin-Stack Air Compressor with 1 1/4-Inch 2-in-1 Brad Nai Now

AFter reading some of the reviews I was a little nervous about buying this, but we just finished hanging trim throughout our entire house and never a problem, hitch or glitch. I am very pleased with this tool!

Read Best Reviews of Campbell Hausfeld FP209599AV 2-Gallon Mini Twin-Stack Air Compressor with 1 1/4-Inch 2-in-1 Brad Nai Here

Used the air compressor to install hardwood flooring and worked great. The Brad nailer seems to leak air a little otherwise works fine.

Want Campbell Hausfeld FP209599AV 2-Gallon Mini Twin-Stack Air Compressor with 1 1/4-Inch 2-in-1 Brad Nai Discount?

This is not a good quality compressor. I expect more from CH. The air feeder lines from piston are car fuel lines and not air hoses. The two feeder hosed rub against each other (due to poor design) because of vibration and will wear a hole in each other. I have had this compressor for 1 year and 2 months, used it 5 times and now the hoses have worn through and air leaks out. What a piece of crap. I spent 3 hours fixing this, cutting away crappy fittings, reinstalling air hose and clamping off. Do not buy this.

Save 53% Off

i bought this gun and compressor to do some wood floors, it worked great, the gun shoots nails and staples, the gun itself is small and lightweight, which makes it easy to handle and, the tank is also small and lighweight, which lends itself to moving it around.

all around i was able to put down wood floors nail the 1/4 round mouldings.

the only thing i want to change on it is the hose, its a coiled hose will makes it a little rigid and cuts down on the distance from the compressor.

i tried to hook up an air spade to it but the tank is too small, stick to what its made to do, running the air gun.

good item for small jobs.

Bonaire Portable 120 Volt Air Compressor

• Portable Air Compressor
• For all Home,Shop and Garage needs.

Purchased from Costco, tried to use it once to inflate a kiddie raft. Worked for 20 seconds and died. Don't even bother.

Buy Bonaire Portable 120 Volt Air Compressor Now

Bought it at Costco today, like one of the other reviewers. It runs, it's loud, yet there is barely any pressure. Certainly not enough to inflate anything. Will have to return it.

Read Best Reviews of Bonaire Portable 120 Volt Air Compressor Here

I would give this a ZERO, but 1 star will have to do.

I opened the box. Read the instructions. Plugged it in and switched on. It rev'd up and kept going until there was a pop. Now it just revs and no air pressure come out. Tried switching it on and off. Letting it cool down. ... No success. Utter junk.

Don't waste your time.

Want Bonaire Portable 120 Volt Air Compressor Discount?

Will have it for two days because Costco is closed tomorrow, I'll be returning it the day after, it's complete junk!

I bought it from costco two days ago, and left for camping.

right after I pluged it to my quickbed, I had to wonder what is wrong with the machine. there was almost no air coming out. instruction tells that I need to block deflation to increase airflow, but sooner my thumb became tired.

I blocked the deflation with tape and let the machine work with making noise. I guess it took almost 20-30 minutes to inflate queen size air mattress.

It's box says high-flow... and shows mattress to tell that the machine can inflate mattress. YES! it can inflate! but it's a problem of time and noise.

one good thing is that the machine can push more air to higher pressure so that mattress become more firm. but took long long long time with loud noise.

it provides various adaptors. when I came back home, I tried it for my boy's airball. ( I did not use needle, but narrow adaptor to see how it buid up pressure because manual foot pumt( which almost look like a toy) can blow it up in the same way ( without needle)).it is very soft low pressure ball. however it was not able to push more air into it because 1. most air leaked from adaptor since they fit loose. 2. it didn't have enough air to build any pressure ( leaking air >= from machine :) )

I thought I might be doing something worng, and read instruction again, again. ( nothing much on manual). tried to see how it can blow dust.I bet 1.5V hand fan ( toy fan) can blow more air than this.

if you are trying to use it for tires that need just more air, this might work for you. ( when I blocked air from nozzle, I could feel air pressure ( pressure seems OK, QTY is problem to me ... and noise )

returning it tomorrow.

Stanley Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler

• 1-1/2-inch to 2-inch pneumatic flooring stapler for driving flooring staples
• High-speed, mallet-actuated operation; extra-wide composite base; 420-inch-pounds of driving power
• Constructed of aircraft-grade aluminum;-includes rubber-tipped mallet and foot kit
• This stapler is ideal when working with 1/2-inch to 3/4-inch finished or unfinished hardwood flooring
• 15 by 3-1/8 by 3-1/4; 11.2-pounds; 7-year limited warranty

I purchased the MIIIFS stapler to lay approximately 1,700 sq. ft. of 3/4 inch red oak flooring in my new home. After installing well over 1,400 sq. ft. here are some of my observations:

1) The tool makes it very easy for a novice to put down a nice, tight hardwood floor. If the boards are laying tight an easy swing of the mallet is all it takes to fully seat a staple (more on this later). If the board is warped the MIIIFS can stand up to a solid mallet smack without any trouble. The mallet's plastic face, by the way, does not show any signs of cracking so far.

2) The stapler efficiently uses the its air so you do not need a big compressor. I have been using a 1.5 hp unit with a 6 gallon tank. Output is set at 85 psi. I doubt such a small compressor could supply two nailers simultaneously, but it handles one quite nicely.

3) The stapler did develop a small air leak near the top shortly after I began using it. The amount of leaking is small (based on psi drop at the compressor) but does make a distracting noise. This leak does not affect the function or reliability.

4) At your starting wall you need to face nail the flooring until you get about 6 inches from the wall. After that you'll have enough room to get the stapler into position.

5) As you approach the far wall the stapler can be used up to the last 13 or 14 inches.

6) As mentioned earlier the tool only requires an easy mallet smack. However, if you don't swing firmly enough the staple will not seat fully. This is usually caused by crowding against the far wall and not having enough room to swing the mallet.

7) The firing knob is too stiff to actuate by hand reliably the mallet is required. It would have been nice if there was a way to trigger the stapler by hand then you could use it much closer to the far wall.

8) I have not had any problems with jamming. The unit I've been using has reliably shot every staple right down to the very last one in the magazine.

9) I have heard some rumors of staple-style flooring nailers damaging the floor's tongue. After closely examining several hundred staples in oak I'd say that about 2 or 3 percent show any signs of tongue damage. Some of this infrequent damage is due to stapling through a knot or due to handling. Some is due to the MIIIFS. I'm not sure how this compares to nail-style nailers. Anytime you send a fastener through kiln dried hardwood you're bound to have some occassional splitting.

Would I buy the MIIIFS again? You bet I would. Despite its few minor shortcomings this tool has saved me a LOT of work and the price is lower than other pnuematic nailers that I've looked at.

Buy Stanley Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler Now

I worked in hardwood floors for five years and the bostitch floor stapler is the only dependable floor stapler I've found to hold up to the everyday use.

Read Best Reviews of Stanley Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler Here

As a professional building contractor I have tried several flooring tools, and can easily state that this is the best fastening system I have experienced for both unfinished and prefinished flooring. The staples hold better than cleat nails, and result in far less tongue splits as well. Surface marring and excessive tongue splitting are caused by improper or inexperienced operation of the tool, not by the tool itself.

Want Stanley Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler Discount?

I run a hardwood flooring company in Wyoming and have 3 of these units running all the time...They are durable and very dependable...we have been experiencing problems with the nuts and bolts holding the bottom plate on. Several of these bolts are in hard to reach areas and come loose and fall out several times a day. I would recommend this item to anyone, but I also would recommend that you buy a bottle of LockTite at the same time, And go through and LockTite all of the bolts, Other than that this is a awesome unit, We have one that is one of the very first air assist bostich nailers and it is still running strong. Good luck!

Save 27% Off

I purchased this nailer from Amazon to lay 3/4" hardwood flooring in several rooms in my house. I have since fired about 5000 staples through it without any problems whatsoever. This stapler is very well designed ergonomically and mechanically. The mallet is big and somewhat massive in weight but there is a purpose in that. It takes very little effort and just a slight tap to drive a staple because it is pneumatic. So if a board lays nice and straight, then a slight tap will suffice, but if you have a somewhat uncooperative piece of flooring, then you will appreciate the heft of the mallet because it will cause the most finicky of boards to come together and lay tightly. The handle is long and fits well in your hand. Consequently your not bent over as much. My first floor laid was oak and I've started my second which is brazillian cherry. This wood is extremely heavy and dense. This stapler does not care how hard the wood is, it just works and flawlessly at that. After all isn't that what you want from a tool, flawless performance!

California Air Tools CAT-210DLV DLV 2.0 Hp 10.0-Gallon Steel Tank Oil-Lubricated Air Compressor

• Powerful 2.0 HP(Rated / Running) Motor
• Direct Drive Pump/Motor for efficient operation
• 10.0 gallon Steel Vertical Tank with Wheels
• Portable and easy to store
• Oil Lubricated Pump for less wear and longer life

I purchased this to get me by until I could afford a larger compressor for my home workshop. I have used it to build a wall, fill and change tires, and do minor roofing repairs.

It is quiet compared to all the oilless compressors I could find, but you can still hear it inside the house when it is running. It fills up from empty to full in under 2 minutes.

The only reason it didn't get 5 stars was because one of the quick connect hose fittings leaked and I had to replace it, and it lets the pressure get too low before it turns the compressor on to refill the tank when using a nail gun. The last couple of nails would not penetrate the 2x4 completely before the compressor turned on and needed to be finished seating the nail with a hammer. It had no problems with the roofing repairs using the same nail gun going through the shingles and plywood however.

When it shipped there were several tags and warning labels saying it did not have oil in the compressor. It was supposed to be shipped with a bottle of oil. Mine didn't have a bottle but it was shipped with the oil already inside. Not a big deal, but it was a bit confusing and I ended up draining the factory oil and replacing it with my own to be sure.

Overall I would recommend this compressor for a small home shop that does not require a large volume of air to run tools for an extended period of time, or for the average homeowner that needs a compressor occasionally to fill tires or blow out the sprinkler lines. Good deal for the money.

Buy California Air Tools CAT-210DLV DLV 2.0 Hp 10.0-Gallon Steel Tank Oil-Lubricated Air Compressor Now

The box was half soaked in oil. I re-filled it and ran it about 10 minutes. At that point, oil started running out of the oil case. Called the company and they sent a UPS tag to ship back. I returned the unit but have not received a new one yet. Given that it was so new, I requested that they ship a new unit instead of repairing the old one. The high rating is because when it did run, it was relatively quiet and has a pretty quick recovery time. Also, the damage was not the fault of California Air.

Read Best Reviews of California Air Tools CAT-210DLV DLV 2.0 Hp 10.0-Gallon Steel Tank Oil-Lubricated Air Compressor Here

Pretty nice little compressor. Right now I'm just doing light duty with it, filling tires, running a light impact wrench. but its solid and seems very well made. I'll update after I really push it.

Want California Air Tools CAT-210DLV DLV 2.0 Hp 10.0-Gallon Steel Tank Oil-Lubricated Air Compressor Discount?

Pros -I purchased this for home use.I had a small 6 gallon pancake that was ok but it was a little heavy to carry around, especially for my wife. I like the way this air compressor is designed, easy to move and compact. I received this around Christmas and have not used it much yet, but really liked the ease of assembly. I must say the company web site very informative and easy to navigate. I also called the tech support # and they were very willing to help and guided me in fixing the problem with the check valve mentioned in the cons. Cons -When I first got the compressor assembled the check valve was sticking, this was an easy fix it only took a few minutes.

Save 3% Off

Doesn't bode well for obtaining a new potential customer. How am I supposed to buy the correct replacement parts that are specific to this brand and model if I can't even find it in their house? Their website doesn't even have a "discontinued" page, pdf's for user manuals for discontinued equipment, etc. This is where customer support starts! You gotta back your product and flood your website with detailed product info! What's sad is that I WANT to fall in love with this brand/model because of the low db level of this particular model and the good reviews on performance. Damn! I will look at their newer models and contact them directly about my concerns. Who knows, maybe I can get a consulting job with them and show them where the weaknesses are! :O) Pay me in tools! :OD

Ingersoll Rand Straight-Through Silencer, Model# 32323560

• Especially well-suited for inlet service on reciprocating compressors, small rotary positive or centrifugal blowers, or to discharge vacuum pumps
• Steel construction with enamel paint

First off, this thing is heavy duty. It's basically a glass pack muffler for your intake on your compressor. I'm sure it's meant for industrial applications as the holes are 1-1/4". I bought this to quieten down my Husky 60gal compressor from Home Depot as it gets pretty loud. I spent about 15 minutes in the plumbing section of Home Depot with muffler in hand coming up with a mix of bushing, reducers, and pipe fittings to take the opening down to the 1/2" the compressor uses. Same thing for the tail end so I could thread the air filter back on as well. After all was assembled, I turned on the compressor to find that the noise level was easily reduced by half. You can actually talk to someone while standing next to it in a normal voice. This product is definitely worth the buy.