Tru-Flate 18-215 1/4" Female NPT Input Safety Blowgun with Rubber & Safety Nozzle

• Oil resistant
• Soft rubber tip seals tight and will not mar finishes
• Ideal for cleaning fuel lines air passages and carburetors
• With safety nozzle connected limits air pressure to 30 PSI meeting OSHA safety standards.
• Convenient hang hole comfortable lever and 1/4 inch NPT female inlet 150 PSI inlet pressure

need a air blow gun for the welding truck, (had just put a gasoline power air compressor on the truck) so I ordered this gun for the truck,

in the shop I find the rubber tip handy but many times it restricts the amount of air and for really blowing out some thing or what ever wanted the other tip as well,

but saw this one with two tips, and figured extra tip instead of two guns,

(why I gave it 4 stars instead of 5)

there is no storage place to keep the other tip that is not being used would have been nice to have a place to screw in the unused tip to keep track of it, so now I will have to figure out some way of not loosing the extra tip,

Save 26% Off

Pressure Regulator

I replaced my OEM regulator after about five years. Same brand. New one works great. A bit of adivce...I installed a shut off valve between the tank and the regulator so pressure is no longer on the regulator 24/7. I leave my shop compressor on all the time so I have air whenever I need it. Old configuration had the shutoff valve after the regulator. Constant 90 psi pressure likely lead to the old regulator's seal failure after 5 years, which I believe is testimony to the OEM valve's quality. With new valve configuration, my tank holds full pressure for more than a week when not in use.

Desiccant Snake DS20 DEV-130502

• DS20 Desiccant Snake

The DeVilbiss Desiccant Snake DS20 DEV-130502 works very well. When I do automotive paint work I need dry compressed air to do a quality job. The Desiccant Snake really does give me peace of mind that I am doing what is needed to ensure a good paint job result.

It is very easy to install and works better than the water separators I have used in the past.

Buy Desiccant Snake DS20 DEV-130502 Now

Does exactly what is says: keeps moisture out of your line!! and works better than them moisture traps!! good investment! thanks.

Read Best Reviews of Desiccant Snake DS20 DEV-130502 Here

I build furniture, and recently I was having trouble with water in the line clouding up the lacquer finishes I sprayed. I didn't want to spend hundreds of dollars on a desiccant air dryer, so I purchased one of these and it works like a charm. I've also used it to paint cars and it worked without a hitch. If you're looking for a temporary fix to that menacing moisture that'll ruin a good finish, look no further.

Want Desiccant Snake DS20 DEV-130502 Discount?

This hose is perfect for the guy who worries about water or oil in their air lines. Bought one and put it on right after my new QC3 3-Stage Air Filter/Dryer Unit. Both together work perfect, and my fish eye issue is gone! My compressor is only 3 years old, but I apparently had a little oil residue coming through my lines. This helped to take care of any issues. My paint work now is free of contaminants. A+

WEN 2290 Air Compressor Accessory Kit, 20-Piece

• Great air compressor kit with all you need to start your projects
• 9 assorted male and female connectors, plus tire gauge and tire chuck
• Blow gun with 4 accessories
• 1/4-Inch x 25-foot coil air hose included
• Includes accessories for inflating tires and inflatable sporting goods, blowing dust off surfaces and thread sealing tape

We got this kit as a "starter" kit when we got a new compressor... and so far it has had all of the attachments that we've needed.

Buy WEN 2290 Air Compressor Accessory Kit, 20-Piece Now

Overall nothing of great value here. I recommend buying JUST the things you need and getting the better quality version of it... it will be worth it in the end.

Read Best Reviews of WEN 2290 Air Compressor Accessory Kit, 20-Piece Here

The hose isn't high quality but it held up to the 100lb pressure the first couple times I used it. The fittings are not solid connections to the tank and could hear the air leaking. I can foresee the need to do repairs on the hose in a few months. The hose is also short for a coil hose. I didn't measure the length, but was disappointed.

Want WEN 2290 Air Compressor Accessory Kit, 20-Piece Discount?

Great item for the price has most everything you will need. Comes with all the fitting for the compressor and all the tips.

Save 29% Off

Just looks cheap in the box and it goes downhill from there. Package was cut open before I even got it. Not worth returning... hoping it lasts for the few/infrequent times I use it?!

DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel

• 4.0 CFM delivered at 90 PSI pump provides rapid recovery
• Oil lubricated pump improves durability
• Cast iron cylinder enhances pump life
• 10-inch pneumatic wheel and handle kit for ease of mobility
• Top load panel with positioning holes allows unit to transport loads up to 100 lbs;High-flow regulator for increased performance

I looked over compressors for awhile and was impressed by the list of features with this model. I love the wheels and the upright nature with the handle. I have found the drain valve hard to find visually and I was extemely disappointed with the cut in factory preset at 95 pounds and the cutout set at 120-122 pounds. I see no reason for these low settings. other models cut in at 120 and cut out at 150. depending on your tool set this is a problem. My framing nailer operates best at 115-120 so with this compressor it's only operating at peak performance 1/3 of the time. I am trying to figure out how to adjust the cut in/out presssure but the manual is useless in this area. All of my other tools work great and it can definetly keep up with everything I've attempted so far other than my somewhat disfunctional framing nailer. Overall it has been a great unit so far.

Buy DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel Now

I've put off purchasing a portable air tank for years and finally bought this one after lookimg and comparing for quite some time. I am very pleased. Builds air in a hurry and will keep the tank at the same level even with the tank valve open to not allow the air to stay in the tank. It is a little heavy to lift but the wheels and handle were put there for a reason. I like this dewalt compressor very much.

Read Best Reviews of DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel Here

Good little compressor. I bought it to run a Hitachi NV85 nailgun. It works great. Good quality. I like the solid rubber tires and the oiled compressor. Granted it is a relatively small capacity compressor just like all portable nailing compressors but unless you are nailing nonstop it does just fine. Cycle rate is fairly quick and I like that it has a good heavy grounded plug. Time will tell its durability.

Want DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel Discount?

great compressor, has exceeded expectations. when recommended by contractors and I just need for home use I jumped at it. no regrets,airs tires, paints, nails, and chips with ease and reliably.

Save 48% Off

I bought this Compressor last year for my garage. I wanted one for tires on my truck,car, and lawn tractor. I used it that summer a few times and it ran fine. NOW, spring is here and I wanted to check tire pressure on the lawn tractor and it just hums and trips the overload on it. I waited for it to cool down and reset it. I hit the switch and it hums. I turn the switch on and off a few times before it trips and all of a sudden it runs. Warrentee is for 90 days on a bebuilt I guess. I have ALWAyS been a YELLOW guy. This has let me down. $300.00 plus and it is JUNK !!!!!

Pro-Quality High-Volume Air Blow Gun - High-Volume Air Blow Gun - Releases Huge Blast of Compressed

• Professional-grade air tool - makes your air hose into high-power blower
• Special vented nozzle uses compressed air to create vacuum, draw in outside air
• Dramatically increases volume expelled from nozzle without draining compressor tank
• Rugged die-cast zinc body with mirror chrome finish, machined aluminum blower nozzle
• Easy thumb-trigger, finger guard hanger hook 1/4" NPT female input, 90 PSI, 6-1/2"L, 5.7 oz

This blower works well. It moves a ton of air without using too much air from the compressor.

Wear hearing protection. This thing is loud as h*ll.

Save 41% Off