Professional Products 10242 1/2 Npt To -10 An(Pair)

This was for installing a remote oil filter. The product may work but after finding that it was made in China, I decided to use one that is steel and made in the US. I might use it on a less critical application than my engine oil line.

Speedway 6909 8-Gallon Air Compressor with 77 Piece Kit

• 15.5 A, 1.5HP, 3360 RPM, 8 gallon tank capacity
• 5 CFM @ 90 PSI, 6 CFM @ 40 PSI
• 115 PSI Maximum
• High-efficiency, cold-start twin capacitor induction motor with thermal overload protection
• Ultra-quiet 93-95 dB operation

The combination of the compressor with a starter set of most used tools is a good value. The SCFM rating is higher than the typical pancake units so that a small spray gun can be used.

The unit was not adequately boxed given its weight. This resulted in the tank pressure gauge being damaged. An email request for a warranty replacement took two tries but was then provided quickly.

A small amount of assembly wheels, feet, handle is required. Very visible warnings to be sure to add the oil before using. The breakin procedure is clearly described.

It is noisier than I expected. All fittings were tight pressure held.

The supplied tools, while not professional grade, seem adequate for occasional home shop use. The included air tools are a brad nailer, a die grinder with a variety of stones plus cut off wheels and a ratchet with a set of sockets. There were also an air nozzle, tire chuck and a typical assortment of fittings. The hand tools inch and metric nut drivers are junk.

All in all I found the package a worthwhile value and the warranty response was good.

Buy Speedway 6909 8-Gallon Air Compressor with 77 Piece Kit Now

I went through the recommended break-in procedure, then charged the compressor up fully. The compressor charged quickly, but within 1 hour lost all pressure with nothing connected. The driver sets sent with the compressor are very poor quality. Used the air ratchet once, below recommended pressure setting, and it also sprang a leak.

I returned the item for a full refund.

Read Best Reviews of Speedway 6909 8-Gallon Air Compressor with 77 Piece Kit Here

Dam good product. This is a great and handy little compressor. Not to loud... Shipped in a reasonable time... Many little handy stuff I haven't even used yet...

I only wish it had came with an impact gun then it would have been perfect.

Everything appears to be well made.

Dual Action (DA) Air Sander - Red - Compressor Tool

Very nice product over all. Had a couple minor problems with things, Contacted company, they fixed it in a good amount of time. The best thing i like about this is that Tool Price, ( the company that shipped this DA Sander) is unlike most that have a pre printed letter to send with, this was hand written (not a copy of it, I find this rare of any company, and Fixed the problems that had happened. Great work Tool Price and thanks for the fast action on getting things fixed. Also looking forward to looking at more tools of your guys.

Got on time. Works great for the price would buy another one will be using this in the next week for body work on my pickup

Buy Dual Action (DA) Air Sander - Red - Compressor Tool Now

New Air Pressure Regulator 1/4" w/ Free Gauge

• New 1/4" Air Pressure Regulator 25 CFM mini Series w/ free gauge
• Free Gauge
• Arrow Pneumatics
• 5 - 125 PSI standard

Shipment arrived in two days. I can't even leave feedback until after 6 more days. This regulator and gauge is better then the original Norgren setup that came with my 5HP Campbell Hausfeld compressor. This regulator has two ports for the gauge. One on each side. This allows the user the flexibility to align and install the gauge on either side for the best view. A teflon-coated brass plug is provided to insert into the gauge port not used. A 3/16-inch Allen Wrench is needed to insert the plug. Once installed, this luxury feature prevents the regulator and gauge from interfering with the other controls on the compressor. And this gauge was free. Gauges usually cost as much as the regulator. I installed the regulator horizontal with the gauge facing up and clearly visible next to the tank pressure gauge. The entire unit is far more precise and sensitive than the original. I can adjust hose pressure accurately within a quarter pound. Frankly, I was not expecting this quality and features for $27.00. Simply install the regulator with the air-flow arrow pointing in the right direction. Cover all threads with Teflon tape before installing. I have no leaks and a compressor that functions better than new. This regulator will easily handle 125PSI working pressure. And just for extra safety, I use 200PSI hose. Hose sometimes get worn, crimped or twisted without the user being aware. Go ahead, let off some air.

Buy New Air Pressure Regulator 1/4" w/ Free Gauge Now

This air regulator is one of the best that I've seen and used.

The construction is machined aluminum/heavy plastic, and the supplied guage is of a high quality, graduated in p.s.i. and bar. That being said, here's what sets it apart from the rest: you connect it to your air source and turn the knob to get your desired air pressure. If you turned too far, then you turn the knob 1/4 turn back and the air pressure backs off. You don't have to back it off 10 turns to release the pressure then try again. It is very easy and quick to set the pressure you want, and once the pressure it set, it stays there.

After dealing with what seems to be a sea of junk air regulators, I'd give this one 6 stars if I could. I highly recommend it.

Read Best Reviews of New Air Pressure Regulator 1/4" w/ Free Gauge Here

Just installed this regulator on my portable compressor and it does seem to have reliable ajustment to it. The guage that came with it was made in china but the regulator was made here at least. I would recomend this to anyone that needs a quality regulator for there compressor.

Want New Air Pressure Regulator 1/4" w/ Free Gauge Discount?

I am posting this review in hopes that somebody will comment on it and tell me what's wrong.I honestly don't know if I am doing is something wrong or if this is a bad product. I think it's my fault.I've done extensive research on the web to find the source of this problem.

My Campbell Hausfield air compressor had a slow leak in it last summer. I used soapy water after unplugging it to try to find leaks. I found one but it continued to leak after I used teflon tape on that fitting.

I figured that i had a slow leak that I could not see in my old regulator. I replaced it with this one. First thing I noticed was that the knob comes off too easily. I'll fix that with some glue when i get around to it. The next thing I noticed was when I tried to cut the pressure back in my line air escapes forcefully out of this regulator. If I allow this to happen my compressor wil be coming on and off a lot more than I like. NO AIR ESCAPES when I have it fully open.My old one did not do that. I still think I have done something wrong so I refuse to downgrade this regulator. When i find out either way I will update this review and grade it accordingly.

I did really like the price of this unit and the fact that it came with an extra gauge. It looks to be of good quality material. That's another reason I think the fault is me.

Did I eventually find my leak??? No...I did not..Even with extensive use of soapy water. My compressor also has a habit of throwing a breaker when it comes on. I'm thinking the valve in the fitting that is between the compressor motor and the tank is bad. It's also possible that the air is leaking back in the motor itself. This compressor is only 8 years old and it is not in frequent use. If the leak is in the motor I'll probably sell this unit as a parts only compressor. I'm tired of dealing with it. OH...shutting this regulator completely off does not help. It's still leaking back in the unit itself.

As I said at the start I will really appreciate helpful comments on this problem.

Save 66% Off

The regulator works perfectly for my old compressor. It is very easy and quick to set the pressure you want, and once the pressure it set, it stays there.

Stanley Bostitch CAP2000P-OF 6-Gallon 2.0 Peak HP Oil-Free Compressor

• Oil-free pump requires less maintenance
• 2.8 CFM at 90PSI with 150 maximum operating pressure for improved tool performance
• Large 6-gallon reserve tank with ball-type drain valve for easy drainage
• Impact-resistant composite shroud protects gauges against jobsite damage
• Weighs only 38-pounds for portability

Got a great deal on this compressor, it's fairly

new, doing light duty around the house, so it has

not been tested very heavily. It's supposed to be

brand new, not refurbished, but the box it came in

made me question that, the box looked like it was

shipped around the world, and then the plastic carrying

handle on the top cracked on the first job in the

back yard in the first 2 weeks of use. It's supposed

to be brand new, and the plastic carrying handle

cracks in the first 2 weeks....what's with that?

Made me question the quality of construction of the

whole thing, it's a high pressure compressor for

goodness sake, but still using it, others swear by

it.

Buy Stanley Bostitch CAP2000P-OF 6-Gallon 2.0 Peak HP Oil-Free Compressor Now

I've had mine for about two years, and use it mostly for putting air in our tires. Started a woodworking project this weekend and after the first few hours the pressure reducer has gone out, and the compressor no longer works. I now have to decide if I want to try to repair it or buy something different.

Read Best Reviews of Stanley Bostitch CAP2000P-OF 6-Gallon 2.0 Peak HP Oil-Free Compressor Here

Do NOT purchase this compressor. Mine burned out with very little use. Others have had constant problems with the regulator. The pressure regulator is a piece of junk.

Want Stanley Bostitch CAP2000P-OF 6-Gallon 2.0 Peak HP Oil-Free Compressor Discount?

Bostitch used to be synonymous with quality. This compressor is garbage. Air chuck leaked almost immediately and was replaced, regulator always leaked. Cooling fan stripped out and exploded within a year. Fan was replaced. Motor has now died after only two years. When you can get a compressor, 3 nail guns, hose, bag, etc... for $250, I guess you shouldn't expect much, but when you are in the middle of a job, you can't afford for things to be breaking down. This compressor is not reliable.

Save 64% Off

My buddy owns this compressor, and has had it for at least 3 years. We do a lot of handyman work. He and I have run roofing nailers, framers, trim nailers, and used it pretty heavily throughout the years. Never had a problem that I know. The air regulator is stiff and not too dependable, but we don't usually turn the pressure down and just leave it at max, which is about 120 psi. There's not too many tools that can't take that pressure.

I like the fact that it is light and relatively quiet. So you can plug it in indoors and you can talk over it. It vibrates a little and wants to walk around on a slick floor, but oh well. It is too dependable to not give a high rating, although there are obviously compressors that put out more air.

Bostitch makes pretty good stuff, and this is no exception. The thing I like about it most is that it will start reliably when it is cold, and being oil-free it won't spill oil when tossed in the back of a truck crooked... which happens to be one of our favorite pastimes!!