Surebonder 9615, Upholstery Stapler with Carrying Case

• Safety mechanism prevents accidental firing
• Quick release magazine for easy loading
• Adjustable air exhaust
• Stapler viewer

This tool is a good value, coming in at about half the price of the others offered on Amazon. It does the job just fine, and while the fit and finish is not equivalent to higher priced tools it will give good service.

My main criticism is the manual: it is obviously written by someone whose first language is not English, important details are left out, loading instructions very ambiguous, and none of the specifications (operating pressure, staple size, etc.) are given in units that an American would understand. This is OK if sold to someone outside of the American market but potentially dangerous for those who are and can't do the conversion. Staple size is obvious because they are standard and Amazon sells the Surebonder staples (which are a good product and value as well I bought an assortment with the staple gun). Pressure: The maximum operating pressure in the safety warning works out to about 100psi. I get great results with 1/2" staples through loose weave fabric into pine at about 65psi adjust accordingly.

Loading staples: open the hopper (they call it a "clip", like a gun!) by pressing the lever at the back of the gun and the spring will push it out. Turn the gun upside down, pull the pressure plate all the way out, then put the staples in the bottom of the opening and snug to the front of the gun. Push the pressure plate mechanism back in until the lever engages with a click. It takes a bit of jiggling to get the pressure plate to slide over the staples.

Oiling the gun: they tell you to put one or two drops in the "joint" before operation then fire it a few times without staples in the gun. I think the joint is the opening where the staples come out, what I would call the nose. I assume that this is a once when you first use the gun operation, but maybe I'm wrong. Like other pneumatic guns (nailers and staplers) I put a few into the air coupling at the back every use. HERE IS THE IMPORTANT PART: you need to shoot many (20-30) staples the first time out before the gun stops depositing oil next to where the staple is shot. Glad I found out on a cheap scrap and not $250/yard fabric!!!

Safety nose: this should be no big surprise to anyone but since the manual doesn't mention it I will. The gun needs to be pressed against the surface where you are stapling so that the little metal plate that comes out of the nose is pushed back in. This probably only matters when trying to fire it without staples per the instructions for first time use nothing happens if you just pull the trigger with the nose not pressed against a hard surface. Note that the safety will easily mar a softwood surface, this should not be an issue with upholstery but I'm telling you now so you don't get an ugly surprise in the rare situation where that would matter.

Buy Surebonder 9615, Upholstery Stapler with Carrying Case Now

I love this stapler. I ordered it to do an upholstery job. My husband is in construction and has all the 'man-size' tools. His stapler wore me out and was too large to get in some of the tight spaces. This stapler is just the right size and strong enough to fire into the hardwoods. It's lightweight enough that I can use it without breaking my wrists. It's a great buy!

Read Best Reviews of Surebonder 9615, Upholstery Stapler with Carrying Case Here

Using Crex 1/4 staples jammed the loading slide. Only one staple would feed because Crex staples clamped the slide too tightly. This staple gun worked without flaw when loaded with Surebonder staples. Very easy to load and position for upholstering a captain's chair.

Want Surebonder 9615, Upholstery Stapler with Carrying Case Discount?

this is my first air powered tool. it works great. i used it with surebonder's staples and Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor. i am completing my fourth chair today and have used 5000 staples with no problems. it made this project sooo easy. it staples through layers and layers of heavy thick upholstery fabric and wood at only 60 psi and doesn't stop shooting until it drops to 40 psi. every staple seems to just go in so perfectly that i can barely see them afterward. i'm so glad i didn't spend on the more expensive gun that had all the good reviews. this one is a champ. i don't know how it works for anything other than wood and upholstery.

a couple quick notes if you hate instructions or are a newbee to tools like i am (also to correct an earlier reviewer's very bad info);

the staples go in upside down, pointing away from gun.

it works great with surebonder's 300 series staples. i haven't tried other brands.

if your compressor doesn't use oil then you must put a few drops of oil in gun at the air connection (this is the little bump at the tail of the gun). do this every 4th or 5th time that you load a row of staples and at end of each work day. don't forget to do it but don't over do it or your air hose will get blocked and need to be wiped out.

if your compressor hose will not connect to the gun, you'll need to go to hardware store and get a $2 quick connect. i thinks it's called a "male" quick connect. i just took the hose and gun to home depot and asked them which quick connect to buy.

there is an air exhaust knob on back of the gun that you will want to point toward our hand. it doesn't spray oil all over the place or anything like that but after a few hours of stapling, you will notice your thumb gets a little oily. it most certainly does not come out on the staples as someone said in a review, he totally put the oil in the wrong place.

the gun will not work unless you press it against something. it has a saftey on the nose of the gun for people like me that load the staples with gun pointing their face.

Save 31% Off

Purchased this tool to staple #30 felt paper to OSB boards on a roof during a re-shingle. My high-dollar stapler had blown its seal a few days before I was needing it so I ordered this gun on a quick ship to try and get by. I was amazed at how well it performed using very close to a full box of staples. Misfires were no more than the expensive gun so I plan to use this one till it quits (might even buy another). For the cost, you should be well pleased if purchased. Also has a carrying case for safe storage, oil for lubrication and is equipped with the male adapter to immediately get you ready for use.

Campbell Hausfeld HL540100AV 8-Gallon Air Compressor

• Ideal for heavy duty home or garage use
• Reliable, long-lasting pump
• Features cast iron, oil lubricated pump
• 125 max PSI
• 1.3 HP pump

I spend many hours searching for my next air compressor on the Internet. Reading reviews from many customers got their air compressor delivered with some damages, I was holding my order.

One day, an email came from Harbor Freight Tools, and I was just checking their items and offers. WOW! "Isn't this the one that I was going to order from Amazon?" And $109.99? I carefully compared their web photo with this one on Amazon. A perfect match... but only the name of the company. Because this one from Harbor Freight Tools is Central Pneumatic.

I think it is safe to say that these air compressors are made in china by a Chinese manufacturer and whoever order them spray the buyers name on it.

Anyway, I went to one of Harbor Freight Tools store nearby and bought one. I picked one in a clean box. Not a crushed box with open holes.

I filled this new compressor with air and left it for 24 hours. No sign of any problems so far with air pressure at 125 psi where it stopped last night. I unplugged the unit after so I know.

With nice wheels and a handle, it is very easy to move around. I like it a lot.

FYI,

Buy Campbell Hausfeld HL540100AV 8-Gallon Air Compressor Now

I've had this compressor for six months now and it still runs great. There's a bit of assembly involved to put the wheels and handle on when it arrives, but that's very simple to do.

Very important: You will need to add the oil to the compressor before operating it for the first time. For obvious reasons, the compressor is shipped dry with a sealed bottle of oil included in the box.

Everything functions as it should, although the pressure regulator gauge looks and feels a little toy-like compared to the Craftsman compressor that this one replaced. In addition to widely spaced PSI numbers, it has pictures of items (soccer ball, tire, etc.) as a guide to setting the pressure. To some that might be useful. I'd rather have a more detailed gauge.

All in all, a good compressor for the money. Airs up fast and is good for tires, sporting goods and as an air blower for small jobs.

UPDATE: I've noticed this compressor consumes more oil than others I've used. Frequent refilling is a bit inconvenient particularly because the oil level indicator can be difficult to read.

Read Best Reviews of Campbell Hausfeld HL540100AV 8-Gallon Air Compressor Here

I used to have an older belt driven Campbell Hausfeld portable compressor ... liked it and used it for several years, that's why I bought this one. So far so good ... it's very noisy though ... rattles a lot.

Want Campbell Hausfeld HL540100AV 8-Gallon Air Compressor Discount?

This 8 gallon air compressor, assisted to me cleaning computer parts of the dust.

I am planning to paint my car too !

It's great !

Save $0.99 Off

So far it works great. I didn't realize that I would need to purchase the hose and accessories seperately but not a big deal. It does what an 8 gallon size should do; air up tires quickly, etc. It was a gift for my hubby and he has no complaints on this compressor.

Porter Cable / Dewalt Air Compressor Piston& Cylinder Kit # KK-4835

• Genuine OEM Replacement Part # KK-4835
• Compatible with many Porter Cable Compressors.
• What's included : (1) Replacement Piston, Cylinder and Ring Replacement Kit # KK-4835
• New, bulk packaged
• Please refer to list below for compatibility

Dropped right in to my Craftsman 30gal air compressor. Runs like new!! Alot quieter, and charges up faster. Better price out the door than Sears parts direct!!!

Campbell Hausfeld VH6111 15 Amp 3 Horsepower 60 Gallon Oiled Stationary Vertical Compressor

• Solid Cast Iron twin cylinder pump for longer life
• Durable 60 gallon ASME code tank
• Powerful 230 Volt motor
• Reliable CAST IRON oil-lubricated pump

I recently purchased this compressor and couldn't be happier. It performs extremely well (it's a compressor what's to not work). Shipping was a great experience (shouldn't reflect opinions of the product anyway), timely service and it arrived in perfect condition.

This compressor is a major step up from my previous one. It's quiet though you can feel a minor vibration in the floor from the pistons in the compressor thumping along. That will be corrected when I finalize it's position in the shop and mount it. I may use some rubber grommets to isolate it a bit more, I'm not sure that it really needs it though. More than likely just bolting it down should minimize the vibration.

The compressor fills the tank quickly and I haven't had to adjust the cutoff swith as it came set correctly from the factory.

I'd buy it again no problem.....

Buy Campbell Hausfeld VH6111 15 Amp 3 Horsepower 60 Gallon Oiled Stationary Vertical Compressor Now

I took a chance, ordering this compressor from Amazon. Price was right and I _thought_ Campbell Hausfeld was a quality brand. The process of ordering from Amazon was straight forward. But the compressor was damaged when delivered. An air filter was crushed. Amazon doesn't handle part replacements, so I had the choice of shipping it back to them for a replacement (300lb compressor on a pallet) or they would refund me the cost of purchasing the replacement air filter. I chose that, but then after running the compressor for less than an hour, the electric motor blew up. It makes a horendous screetching noise when running. But unfortunately since it's past 30 days, I have to deal with the manufacturer (no credit for the time spent waiting for the damaged filter element, which prevented the unit from being run). All in all, I'm receiving fairly poor service on what appears to be total junk.

lesson learned, should've gone to a local tool supplier.

Stanley Bostitch SB-1850BN 18-Gauge Brad Nailer

• No-mar tip
• Comfort grip
• Directional exhaust
• Adjustable depth control
• Lightweight

I have used this nailer with 1" and 2" brad nails. It works well with both tank and tankless air compressors. I have put over 2000 nails through this nailer. It's safety works great for all uses of the home repair person. I have used it to from wall mounting shelving to nailing with glue for wood furniture. If I had one complaint with this product, it is that the depth adjustment is quite sensitive. If the nailer is angled at more than 30 degrees left or right (as one would do when nailing into the corner) the nail will not be fully engaged. When a hammer is used to fully seat the nail. The head of the nail usually bends over. If you purchase this product knowing this minor limitation, I feel that the overall safety, ease of use, and range of nail sizes will more than satisfy the most scrutinizing user.

Buy Stanley Bostitch SB-1850BN 18-Gauge Brad Nailer Now

I am a big time Delta/Porter-Cable enthusiast. Most everthing in my garage says Delta or Porter-Cable on it. They have been great with replacement parts and/or info over the phone. But I have to say that this Bostitch is a great little brad nailer. I own a PC BN200 brad nailer but the Bostitch is my hands down favorite. Super light weight, easy to grip, easy to load and no recoil (if you release the trigger after you remove the tip from the work surface). That's right! No dents even without the plastic tip.

Three things I like the best are:

1) It leaves a smaller and cleaner hole than my Porter-Cable.

2) It shoots 5/8" to 2" nails opposed to 3/4" to 2".

3) Being a smaller gun, it fits into tighter spaces and is easier to handle for longer periods of time.

Don't get me wrong, the Porter-Cable is great, but the Bostitch is just a little more refined.

One thing that should be noted, the Bostitch does not have a quick release nose piece but really, when was the last time you've ever had to clear a jam on a brad nailer? Besides, it won't happen with the restrictive on this unit.

At less than an expensive dinner, you owe yourself this one.

Don't second guess buy the best one first. It will be money very well spent.

Read Best Reviews of Stanley Bostitch SB-1850BN 18-Gauge Brad Nailer Here

I should have purchased this bradnailer a long time ago! You wouldn't believe the time saved attaching base and window trim to walls with no bashed wood or fingers. If you are looking for a great tool at a great price then this is it! The nails are shot with supreme accuracy and even the smallest trim was never "split" like with finish nails (no predrilling needed). Wonderfull light tool that is very easy to load and use. Uses 5/8" 18 gauge to 2" brads which I thought wouldn't hold worth a damn but was shocked! This tool is a must have for anyone who wishes to trim their home or do woodworking.

Want Stanley Bostitch SB-1850BN 18-Gauge Brad Nailer Discount?

I bought the Bostitch SB-1850BN 18-Gauge Brad Nailer to use with trim work. I am a home owner and love doing as much as I can myself. this tool makes life so much easier. I can use this tool to put together bird houses. I have found this tool to help in all of our craft projects. A good buy!

Save 33% Off

This nailer has everything I need to install moulding. It is lightweight, performs well, and is reasonably priced. The Senco may be a "better" gun, but it is 50% more in cost. I only use mine occasionally and the Bostitch satisfies my needs.

Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor

• Lightweight and portable--easy to carry from site to site as you work
• One horsepower peak ,1/2 horsepower runningand one-gallon capacity
• Ideal for a range of renovation and home improvement jobs, as well as for hobbies and crafts
• Delivers 20 to 44 drives per minute
• Backed by a one-year warranty

This is a great second compressor. I wouldn't buy this as a primary or first compressor but it works fine to support small nail guns. My other portable weighs 68 pounds and will keep up with 1 to 2 framing or roofing nailers. My shoulders ache from the number of times I have lugged it up 78 steps to a job site. This goes anywhere with a bunch of tools in the other hand.

Other than nail guns, NO it won't do much at 0.7 cu ft per min when paint spray guns need 10 times that, and a blow gun will empty the tank in 10 seconds or less. But seriously, this compressor gives me at least 10 shots from my 16 ga finish nailer before the motor kicks in; a couple more off of an 18 ga finish nailer, and as an acid test, I got 3 shots from a 3 1/4 inch framing nailer (not recommended but if all I need is 10 nails I'd rather carry this in especially considering that my ripe old age keeps me from doing much serious hammering!)

Last word, the first one I received had a leaky reed valve and it had to be replaced by Amazon I'm very happy with the replacement and have used it on several job sites.

Buy Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor Now

As a general contractor I have several compressors. At least 90% of the time I grab an Emglo because they do everything I need except texturing. But I've grown fond of this little Senco WHEN IT IS USED PROPERLY! That means if I have a small trim project or a VERY small framing project it does the job, and both takes up less room and is a lot easier to pack around. It'll drive 3" framing nails no problem...when the tank is topped off, but the last couple nails before the compressor cycles always need to be hammer finished. Same is true for 15 or 18 gauge finish nails. When the tank is just about to cycle the nails don't completely set. My workers love the Senco...much to my chagrin. For one, it's light, and second...it takes FOREVER to refill (relatively speaking) and my guys love to stand there with their thumbs you know where taking a break every 10 to 15 nails or so! So if used for small jobs...or trim where you nail one piece at a time while cutting, well then it's a champ. But if you tend to cut trim for an entire room, then want to shoot it on quick...this Senco will frustrate you no end. You end up hand nail setting too many nails, or else you have to stop frequently, unhook the air hose, drain a little air from the tank until it cycles, then wait for the darn thing to fill. If you use it right... 5 stars. If you use it as your go to compressor... 2.5 stars tops. I hope this helps!

Read Best Reviews of Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor Here

For my applications of easy carry in and out, it's been terrific for lightweight 18ga. finishing.

On a small renovation project yesterday, 4 doors jambs and trim were easy (1" to 2" 18/16ga brads) The very least of my problems was waiting for the little Senco to catch up. Been using it for about 5 months, shot about 10,000 brads. So far it's been flawless.

Very low noise as compressors go, and neat little rubber suction feet that keep it from skidding around and marring up a nice floor.

Want Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor Discount?

I purchased this model based on web search results showing it to be the quietest (69dB) small (1 CFM) air compressor on the market, and generally high satisfaction of other owners. It is indeed very quiet, well made, and lightweight.

I've mounted this compressor in an acoustic chamber that I designed to further reduce the noise, and it is now as quiet as the "super silent" compressors used for indoor craftwork (airbrushing) that cost $600 to $1000 (49dB). At this further muffled sound level, I can operate the unit all day long sitting next to me without discomfort.

I highly recommend this model for indoor craft work. I've used mine for 40 to 50 hours and had no troubles, but feel this unit will hold up for a long time. I will use this in my home for a few hours per day.

Save 17% Off

I purchased this compressor after actually using one on a jobsite. A fellow trim carpenter had recently purchased one and allowed me to try it out. WOW !

It is extremely quiet and an absolute pleaure to carry around !!! I normally run a Senco 15 gauge trim gun along with a Senco 18 Gauge nailer and a Grex micro pinner. Most of my work involves hanging and trimming doors/windows, crown mouldings and chair rail work.

The compressor will power all three guns one gun at a time. I read reviews on this site all the time where reviewers complain about a tools lack of power. IT IS A ONE GALLON COMPRESSOR !!! You can't run a framing nailer with it and even with the 15 Gauge nailer you have to take your time and allow the compressor to refill after 5 or 6 shots!

The trade off is that it is LIGHT and QUIET ! If you have to go one hundred miles an hour, you're probably not doing a quality job in the first place.

This unit shipped from Amazon by FedEx and arrived in a double carton without any damage plus FREE SHIPPING !

If you need a small jobsite compressor for trim work or punch-list items look no further. It is a pleaure to use. Just remember it's not designed for speed !