Pentagon Tools 3/8 300PSI Heavy Duty Retractable 100 Foot Air Hose & Reel Professional Grade

• All steel construction with brass fittings
• Fully Automatic Hose Rewind
• Rated at 300 PSI
• Adjustable hose stop provides the right amount of hose forthe job every time
• Heavy duty base and reel mounts to any wall, ceiling, or work bench and holds 50' of 3/8" rubber hose

I installed this wall mount in my garage. The unit is very sturdy and the hose is an excellent rubber quality. The only thing I do not like is the spring tension doesn't seem tight enough and you need to slowly work the hose back and forth to get it latch were you want. I am concerned that the spring may not make it for the long haul. Excellent product except for the spring tension. I'll update if it eventually fails.

Buy Pentagon Tools 3/8 300PSI Heavy Duty Retractable 100 Foot Air Hose & Reel Professional Grade Now

like others have stated, the yellow color from the hose does come off and stain your hands but it didn't concern me as most of the time i have gloves on when working in the garage. The item was cheap, hose did not leak. Packaging could have been better. Think cheap thin cardboard boxes thrown around by fedex guys when the product weighs over 50 lbs. item came on time due to amazons efficient shipping policy. would def recommend to others.

Read Best Reviews of Pentagon Tools 3/8 300PSI Heavy Duty Retractable 100 Foot Air Hose & Reel Professional Grade Here

Thanks to Amazon, I received this reel very quickly.I used it once and thought it was great. The next day I went to use it again and there was no tension in the reel. It would not rewind automatically anymore. In the process of packing it up and returning it.

Want Pentagon Tools 3/8 300PSI Heavy Duty Retractable 100 Foot Air Hose & Reel Professional Grade Discount?

This product was packaged well, looked good out of the box. It has no handles so it's awkward to carry and move around. Strong tension to begin with, definitely needs to be anchored or else you're not reeling it out w/out it falling; however, I only reeled it out all the way twice before it lost all tension, as if the spring was never there. I returned it for a refund, gonna try a legacy levelwind this time.

Save 54% Off

Good Quality. Very heavy so have a couple people to mount this thing. The sides of the reel and mounting pad should be a bit thicker.

Stanley Bostitch 438S2R-1 16 Gauge 3/4-Inch to 1-1/4-Inch Wide Crown Roofing Stapler

• 3/4- to 1-1/4-Inch 16-gauge nailer for composite shingle roofing, sheathing, and house wrap/vapor barrier
• Patented jam-free magazine; power control valve adjusts power by 30 percent
• Lightweight, durable aluminum frame; molded rubber comfort grip lasts life of tool
• Magazine capacity 160 staples
• 7-year warranty

Exactly what I needed. Sure speed up roofing projects. Lighter weight than I thought. Super easy to change stables. Love it!

Buy Stanley Bostitch 438S2R-1 16 Gauge 3/4-Inch to 1-1/4-Inch Wide Crown Roofing Stapler Now

Heavy duty stapler. Doesn't missfire. A box of 16,000 staples will run about $80-$100 as of 2012, but you can find them cheaper if you look for sales. Basically stapling will save time an money. Because you can use 3-4inch to 1-1/4inch crowns it gives you a wide variety of staples you can use. A box store will almost certainly carry a type the gun can use.

If you are in an area with high winds, local building code may require special engineering. But with tar paper or housewrap... why bother with expensive caps and nails? The gun is also very light with a low clearance to get under overhangs.

Not sure if I would use staples for sheathing, but it would certainly be safer for any people that may be standing behind the sheathing as you fire. Nail guns are the leading cause of death on construction sites for that reason.

Hope that helps.

Read Best Reviews of Stanley Bostitch 438S2R-1 16 Gauge 3/4-Inch to 1-1/4-Inch Wide Crown Roofing Stapler Here

Great product, would suggest checking local building codes before using for roofing, however, I love this stapler!! couldnt ask for a better gun!

Stanley Bostitch N89C-1 Coil Framing Nailer

• Pneumatic coil framing nailer with an adjustable exhaust
• Patented push-button adjustable depth guide sets nails to desired depths quickly and easily
• Lightweight magnesium design; aggressive wear guards to protect the tool from damage on abrasive surfaces
• Magazine holds up to 300 nails
• 12-1/4 inches long, 14 inches high; weighs 8.1 pounds; 7-year limited warranty

I purchased this gun as a quick replacement for my Max CN890II which Ive had for about 8 years. At almost half the cost of the Max I'm very glad I switched. No case, but I'd rather have a nice quality gun than a case. I overnighted the gun so I could get back to finishing my barn the next day after my Max died.. Oiled it up and ran about 9 rolls of various nails through it that afternoon and it fired on queue every time.. Very strong quick and predictable. Highly recommend this one!

Buy Stanley Bostitch N89C-1 Coil Framing Nailer Now

Just bought this gun after my old bostitch stick nailer died. I must say this thing is amazing.

As a contractor, I love the features it has. It feels well balanced and is easier to fit in smaller spaces than the traditional stick nailer. I like how I can set it down on its face when im working, I just grab it and go. no laying down and picking up.

A bonus feature that I did not expect nor does the write up tell you about is that It comes with a factory rafter hook that is well placed.

The only thing I can say bad is that it didnt come with a case, not really a big deal but here on the coast rust is a problem so I like to keep tools in their cases.

Cant go wrong with this gun.

Read Best Reviews of Stanley Bostitch N89C-1 Coil Framing Nailer Here

Excellent Nailgun. At first I had misfires or jams and couldn't shoot 10 nails in a row. I changed the couplings on my hose (the mild hiss was a give away) to better couplings. I reconnected the gun and had no hiss from the coupling to the gun or the coupling to the compressor. I went through 2,000 nails without a jam or misfire! Especially helpful was the extra trigger to convert the gun from a sequential to a single fire gun.

Want Stanley Bostitch N89C-1 Coil Framing Nailer Discount?

This framing gun is everything I expected it to be. I like the coil nailers better than the stick nailers because they are much easier to work with in tight areas. Not to mentioned the N89C-1 is capable of driving 16d nails which was the advantage of the stick nailers before. Amazon's great price and fast shipping just makes everything that much better.

Note: The framing gun comes with two triggers "Smart" (Black Trigger) and "Sequential" (Gray trigger). I left the "Smart" trigger on as that is what I have always used. Some people like to change out the triggers because of the possibility of a double fire if the gun hits the surface twice. If you can control the gun and not let it bounce back after the recoil you shouldn't have any problems with double firing.

Save 16% Off

I bought this nailer after working with a stick nailer for far too long. This Bostich is far more compact and versatile than a stick nailer. A friend had his for 18 years and didn't do any maintenance on it, so I figure with maintenance this may be the only framing nailer I'll ever buy.

WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer

• 18-gauge brad nailer fires brads 3/4 to 2 inches in length
• Operates at 60-100 psi with a 1/4-inch NPT air inlet fitting
• Rubber-wrapped handle; quick-release for jam-clearing; aluminum body
• Magazine holds 100 brads; includes oil, wrenches, and custom case
• Tool weighs 5.4 pounds

I had read the reviews so i went ahead and purchased this for about 35.00 shipped. I got it in the mail and opened it up.The case seemed very cheap. Now i pull out the nailer, It seems like WEN didnt pay much attention to the details. Some of the paint looked touched up, the trigger was just a piece of metal and some of the other pieces of the gun looked of questionable quality.This doesnt look even close to the beautiful, yellow, quality DeWalt that my buddy loans me.So nervously i hook it up and put in a stack of 1 3/4" nails, they loaded nicely. I test the gun on a 2x4.I tap a couple in and the nails go so deep i thought it misfired. So i turn the little depth wheel under the tip,(which feels kind of cheap but actually works better than the dewalt) and tap a couple more till perfect. I start laying some base board and the gun has a very smooth and solid yet lighweight feel to it. Not one misfire. Also the gun doesnt jump around. and the tip looks like it would destroy the board but actually did very well. I finished the kitchen and hallway and am very impressed with the gun. I have used a DeWalt to baseboard and trim two entire houses, and comparing the two I actually think the WEN performs better. I have only shot a couple of hundred nails out of the WEN so I will have to see how it holds up. but for 35.00 I could buy a few of these at the cost of the others. It's even starting to look prettier than the DeWalt.

Buy WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Now

This nail gun is a good value, and seems well made. It works well when you use the right kind of nails, which, as the descriptions says, is 18 gauge, from 3/4 to 2 inches.

Unfortunately, the standards for nails are such that not all 2 inch nails will work with this gun, because believe it or not, 2 inch nails come in two different lengths. I have never found actual 2 inch nails: they are either a bit longer (51mm), like Porter Cable and many other brands, or a bit shorter (50mm), such as Bostich. Only the 50 mm nailes (such as Bostich) fit; 51 mm (like Porter Cable) does not; I have tried both brands.

This is unfortunate, because the 51mm type is more readily available, for example at Home Depot. I had to do a lot of looking around to find 2 inch nails that would work with this gun, but I did eventually find a store (a lumber yard) that carried the Bostich brand. It is obvious when the nail won't work: you simply cannot load it.

I bought this gun to be able to shoot 2 inch nails. It would have been a very simple engineering change to support both 50 and 51 mm nails. Therefore I am taking a star off for not supporting the commonly available 51mm size. I wish also that it would accept 5/8" nails. It actually might, but I'm not going to buy a package to find out that they don't work, or worse, that they jam the machine.

If you are considering this gun and want to use 2 inch nails, be sure a local store carries them before you buy it.

Read Best Reviews of WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Here

This is a Pneumatic tool meaning you need at least a very tiny air compressor to run this. The tiniest 120 volt portable air compressors will run these, most of the very cheap small air compressors are less than $100. If you don't own an air compressor, I will tell you it's a safe investment. They last for 20 years or more, I bought one 14 years ago, and have never changed the oil or done anything. If you want it to last forever, get an "oil" air compressor not an "oil free." They cost about more, but they last forever. As for the size, just go with the largest one you can afford, and make sure it's portable, and something that you can haul in your vehicle if you need to take it somewhere for a project.

About the 18 gauge brad nailers:

I purchased a Harbor Freight 18 gauge brad nailer. I was very happy with the performance, but I noticed that the rear latch was made of soft plastic. If you dropped it once it would shatter the rear latching mechanism into bits. I returned it and got my $32 back (after tax). I went to all the major websites, Home Depot, Sears, Lowes, but Amazon had lower prices on all the different models of air nailers. I have been a mechanic and carpenter for 16 years. I built my own air compressor when I was a kid, so I have a very good understanding of air tools, and tools in general. I have not tried the WEN yet, as I just ordered it. But here are some selling points.

1.) The Dewalt has a lot of bad reviews about it jamming

2.) The Harbor Freight nailer spits a lot of oil out and can be messy, and had no power adjustment. It is also made of soft cheap plastic.

3.) The NuMax looks good, and will work fine, although it has no power adjustment, and no quick release to take the front apart to clear out jams. If you get a jam, it will take 5 minutes to fix it, instead of 1 minute.

4.) The Hitachi looks poorly made, the rear latch mechanism doesn't look like it's made out of metal, and the tool is ugly! But this is just my opinion, more research is needed to see if the rear latch is made of soft plastic.

5.) The other brands, Porter Cable, Campbell Hausfield, etc, are too expensive.

6.) The WEN has

A.) Depth adjustment. This is important because a normal brad nailer set at full power at 120 psi will blast a nail so far into the wood that you won't ever see it again. You need either to regulate the pressure down to 70 psi or maybe even lower for some very soft woods, or some type of power adjustment on the tool. The Wen has this adjustment capability so you can use it without turning your pressure way down at the air compressor. Most air compressors come with a factory air regulator, so it's not the end of the world if your air tool has no adjustments. It will still work fine without them. But I wanted the convenience of not adjusting the air pressure all the time.

B.) The WEN has a quick release to remove the front piece to clear out jammed nails.

C.) The WEN has a METAL latch on the back, and it's on the side of the tool, not sticking straight out the back like some. This means you would have to try really hard to damage the rear latch mechanism, and it looks about 10 times stronger than the Harbor Freight tool I returned which was only $13 less.

D.) Good reviews, no jams.

Now if you purchase the Wen and want to use 2" brads, use Bostich brand only, as they are the correct length.

I will post more after I've received and used the tool for a few months.

March 24, 2013

I've now owned the tool for 1 year. I have built many things with it, I have never had a single jam. My original review still stands. I have used the longest nails you can possibly use in this tool, the 2 inch nails, and it drives them in with power to spare and leaves a tiny pin head print, without damaging the surrounding wood, unlike the cheap staple/brad nail combo guns which leave the very large chunk out of the wood from the staple driver head, this WEN only leaves a tiny, tiny dent in the wood, which is not really noticeable, so it is good for finish work, and the adjustment for depth does work perfect, so you can protect "over driving" the head into the work piece for fine finish work, but it will take a couple test shots to see how much depth you want.

I noticed when driving the 2" nails, it has more than enough power, and doesn't jam, although using such a long nail is much stronger, it is difficult to drive them straight because any angle at all will be amplified when attaching two thin 1/2" pieces of plywood together using an excessively long brad nail (2 inches), which doesn't leave much room for error. I still enjoy using the 2" brad nails that I bought from Harbor Freight which work perfect in this gun, because they are stronger than the shorter ones, although I don't feel that it's necessary.

Notes:

1.) Oil can shoot out of this gun from the top vent onto your work piece. That's the only disadvantage I've seen so far. However, you can turn the vent to the side and it will blow away from your work piece, rather than on top of it, so that's something that is up to the user to control. Also you could very easily put a small rag on top of this WEN brad nailer to cover the exhaust port when doing ultra fine finish work to protect 100% from oil. However, I built several boxes with fine oak veneer plywood and during that time with 60 brad nails I only had oil fall on the wood 1 time (and it easily sanded off) because I wasn't paying attention to the direction of the vent on top.

2.) I love love this brad nailer. The handle is super comfortable. I've never owned a nailer, although I've owned over 30 air tools, this one has a quality feel to it, it's not very heavy, but not plastic and cheap either.

3.) Pressure does need to be reduced below 120-90 psi for ideal results, because you don't need full pressure, even with 2" inch brad nails this gun has more than adequate power to get the job done, so either use the limiter on the tool for depth, or reduce the pressure. I found that reducing the pressure down to about 60 psi was all that I needed to do to get perfect depth control without changing any settings on the tool. Your results will vary. Most air compressors have a small black control knob near the tank, with an output pressure gauge, this is so you can reduce the pressure for nail guns, and paint gun.

The case is not very well made, but the tool its self is very high quality. Overall, after 1 year I'm extremely happy and would never trade this tool for anything. Well worth the investment.

Want WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Discount?

This brad nailer works very well. The tip can mark your surface, so be careful. No problems with jamming. Feels and performs like an expensive nailer. Would recommend to anyone who needs a brad nailer.

I've never used a brad nailer before. However, I wanted a way to quickly/easily re-attach all of the baseboard throughout my house (I removed it to install tile floors) and this brad nailer worked great! I paid around $35 shipped and a comparable 18 gauge 2" brad nailer at the big box warehouses sells for $70 and up!