DEWALT D55167 1.6 HP 200 PSI Oil Free High Pressure Low Noise Horizontal Portable Compressor

• 200 PSI max pressure allows for longer air tool run time
• 4.8 SCFM at 90 PSI allows for quick compressor recovery time
• 78 dBA (tested per ISO3744) operational noise level for a quieter work environment
• EHP efficient high-pressure technology delivers exceptional air-tool runtimes
• Oil-free, maintenance-free pump for convenient use

This compressor is a real knock out.

It goes up to 200 psi, That means more tool time before recharge compared to other copressors with same tank size.

Robust, Tank just feels thick, nice handles, guage protection.

I have used this with an air hammer for destroying concrete, automotive work etc.

It is a nice tire fill compressor because you can pump it up to 200 and wheel it around your cars and fill up without running the compressor.

It is loud, it is a compressor.

When draging it over objects be sure not to band the drain valve protruding from the bottom.

It's beutiful too.

Buy DEWALT D55167 1.6 HP 200 PSI Oil Free High Pressure Low Noise Horizontal Portable Compressor Now

I needed a horizontal compressor to fit under a countertop. And I wanted something that wouldn't make me deaf. I looked at all the normal major brands and wasn't impressed with their reviews and performance. This one Didn't have the quantity of reviews I would have liked to see, but the ones I did read were just about like I'm writing now.

It's compact, but it holds more PSI, so it keeps up with the work. It's relatively quiet also. I don't use it daily though, and I've only had a it a couple months. But so far I'm happy with it.

Read Best Reviews of DEWALT D55167 1.6 HP 200 PSI Oil Free High Pressure Low Noise Horizontal Portable Compressor Here

THE DEWALT D55167 IS SUPER! VERY QUIET. I USE IT ALL AROUND THE HOUSE, SHOP, CARS AND YARDS. THE 200# COMPRESSOR IS SO MUCH BETTER THAN MY OLD 120# COMPRESSOR. THIS IS MY THIRD COMPRESSOR AND THE BEST. THE INPUT AIR FILTER IS A GREAT IDEA. CONTROLS ARE VERY SIMPLE AND EASY TO USE........

Want DEWALT D55167 1.6 HP 200 PSI Oil Free High Pressure Low Noise Horizontal Portable Compressor Discount?

I bought this to replace my little 2 gallon compressor that I bought from Lowes. I was doing some wall texturing with the old one and it was painfully slow and loud (120psi, 0.3cfpm) and had difficulty keeping the pressure at even 40psi. The work looked too heavy (attempting orange peel). With the Dewalt, I can make it through a complete load of the hopper without the compressor turning on at a steady 60psi. The texture comes out even and just right. Even when the compressor does come on (at about 160psi), it fills quickly and much quieter than my old compressor. It's still louder than a belt compressor would have been but it cost half as much. Overall I'm very pleased with this unit. I'm not a professional, just a DIYer. This compressor definitely fits the bill.

Save 47% Off

Great product. Compressor is whisper quiet. Bought this for my garage at home. I had a oil free 5 year old compressor that this one replaced. The 200 psi is great for blowing off the dust from my 5th scale rc truck. Highly recommended.

New 1/4" ASME Safety relief Valve 140 PSI American made

• 1/4" Safety Valve 129 SCFM - 140 PSI
• Free Shipping
• 51 mm Tall x 17.5 hex
• ASME Certified & stamped w/ UV & UB stamps

Wire ring to release air pressure prior to draining air tank so flimsy it was worthless. I had to substitute my own ring in order to release air pressure.

Buy New 1/4" ASME Safety relief Valve 140 PSI American made Now

I now have this installed on my compressor. It works great and it is good to know I won't blow up my garage now!

Read Best Reviews of New 1/4" ASME Safety relief Valve 140 PSI American made Here

Fits my Air compressor and does not go off too soon! Had a thread locking compound already on threads, but I put teflon tape on them as well

Buffalo Tools AR38 Air Control Unit

• For home workshops and DIY
• Eliminates dust, water and impurities from air line
• Extends equipment life and increase efficiency
• 144 PSI / 3/8-Inch NPT air inlet
• Max working temp 140 Degree F

Just what I needed to lubricate my tools and filter the air. The price was right and they shipped promptly.

Buy Buffalo Tools AR38 Air Control Unit Now

Installed this in my airline and it has worked great. For the money you can't beat it. I would recommend it to a friend.

Read Best Reviews of Buffalo Tools AR38 Air Control Unit Here

I'm only giving this thing 3 stars because it does work but it's not the best! I paid $30 for it when I bought it and now it's $20. I'd give it more stars if I would have paid the current price. I needed an oiler for my post driver and this did the job. One of the o-rings leaked to begin with when I turned one of the adjustment screws out the wrong way but I was able to get it to stop leaking. Overall, it worked nice because it has a regulator on it too which you can adjust your air pressure here rather than doing it at your tank if you wanted to.

You'll also need a good coupler to go on the outlet end that makes a good seal so you are not losing oil there. The first coupler didn't seal well with the hose plugged in so once I changed that out, it stopped leaking.

Overall, I would definitely buy this again!

Want Buffalo Tools AR38 Air Control Unit Discount?

fell apart broke first day i received it and i have no patients nor the time to return it i just bit the bullet

Save 17% Off

where do i get replacement o rings for the oiler?It blew out when i turned adjustment screw the wrong way.

Pentagon Tools 3/8 300PSI Heavy Duty Retractable 100 Foot Air Hose & Reel Professional Grade

• All steel construction with brass fittings
• Fully Automatic Hose Rewind
• Rated at 300 PSI
• Adjustable hose stop provides the right amount of hose forthe job every time
• Heavy duty base and reel mounts to any wall, ceiling, or work bench and holds 50' of 3/8" rubber hose

I installed this wall mount in my garage. The unit is very sturdy and the hose is an excellent rubber quality. The only thing I do not like is the spring tension doesn't seem tight enough and you need to slowly work the hose back and forth to get it latch were you want. I am concerned that the spring may not make it for the long haul. Excellent product except for the spring tension. I'll update if it eventually fails.

Buy Pentagon Tools 3/8 300PSI Heavy Duty Retractable 100 Foot Air Hose & Reel Professional Grade Now

like others have stated, the yellow color from the hose does come off and stain your hands but it didn't concern me as most of the time i have gloves on when working in the garage. The item was cheap, hose did not leak. Packaging could have been better. Think cheap thin cardboard boxes thrown around by fedex guys when the product weighs over 50 lbs. item came on time due to amazons efficient shipping policy. would def recommend to others.

Read Best Reviews of Pentagon Tools 3/8 300PSI Heavy Duty Retractable 100 Foot Air Hose & Reel Professional Grade Here

Thanks to Amazon, I received this reel very quickly.I used it once and thought it was great. The next day I went to use it again and there was no tension in the reel. It would not rewind automatically anymore. In the process of packing it up and returning it.

Want Pentagon Tools 3/8 300PSI Heavy Duty Retractable 100 Foot Air Hose & Reel Professional Grade Discount?

This product was packaged well, looked good out of the box. It has no handles so it's awkward to carry and move around. Strong tension to begin with, definitely needs to be anchored or else you're not reeling it out w/out it falling; however, I only reeled it out all the way twice before it lost all tension, as if the spring was never there. I returned it for a refund, gonna try a legacy levelwind this time.

Save 54% Off

Good Quality. Very heavy so have a couple people to mount this thing. The sides of the reel and mounting pad should be a bit thicker.

AO Smith CP1152L Air Compressor Motor 1-1/2 HP

perfect fit. powerfull and easy to install. very good quality . will always use this manufacture.. deliverd on time and had very good instructions with it...it is much quiter than the one tha was installed..

Stanley Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer

• 5/8- to 1-5/8 18-gauge brad nailer and 1/2- to 1-1/2-inch 18 crown staple combo tool
• Adjustable depth dial; tool-free directional exhaust; 135-inch-pounds driving power
• Nail lock-out feature eliminates dry firing; magazine holds 100 nails
• Includes 1/4-inch air fitting, 1,000 1 5/8-inch nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil
• Measures 9-1/4-inches (length); weighs just 2.6-pounds; 7-year warranty

I bought the Stanley SB2IN1 in early January because it could shoot both brads down to 5/8" and staple, giving me more versatility in my shop. Hindsight being 20/20, I wish I would have spent the extra money up front for a good stapler and a good brad nailer. The cylinder wouldn't seal when you hooked it up to an air hose, and I would have to continually hook it up/disconnect it until it would finally seal. The other problem, and it might be related, is that even when I put the compressor at the max pressure (100psi) it wouldn't countersink staples even in 1/2" plywood. The last problem is that if you could get it to countersink a brad, the footprint is the size of a staple. Leaving an ugly mark on your project. I returned the tool and am ordering a separate stapler and brad nailer.

Buy Stanley Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Now

I strongly agree with reviewer,Jonathan Ness about this product. I purchased the Stanley SB2IN1 because it could shoot both brads and staples, giving me the versatility and saving me the cost of two tools. When I put the compressor at max pressure (100PSI) it wouldn't countersink nails or staples even in pine. If you could get it to countersink a brad, the footprint is the size of a staple. Leaving an ugly mark on your project that require additional finishing. I contacted Stanley Bostitch and they told me that they knew of this problem and to get it to countresink, increase the pressure to 120 PSI (however I think the seals will wear out much faster).This is fine for staples but still leaves the ugly mark when using brads.They also told me that this is the problem with a combination tool. If I could return this tool I would...I will use this tool for stapling only and purchase a Porter Cable Brad Nailer, also the brads are much easier to find for the Porter Cable than the Stanley Bostitch....

Read Best Reviews of Stanley Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Here

I bought this 2-in-1 for convenience (it's a 2-in1!) and because of a very good past history with other Stanley-Bostitch tools. I was sorely disappointed. I tried to use this to staple 1/4" underlayment, but encountered numerous jams, misfeeds and situations where one of the two legs of the stapler would not sink. All-in-all, of the 200 staples I tried to sink, I had 30+ 'mis-fires'; or ~16%. I tried varrying the pressure between 80-110 psig (even though the tool is clearly marked do not exceed 100 psig) but the problem never got better. Every 5th or 6th staple would be a problem. Clearly, this is not good. I was left with no other option but to return it (and used my neighbor's Porter Cable to finish the job). I've never had a problem with my brad-only tool Bostitch, so either I got a bad one or this is a bad design. I can't recommend this item.

Want Stanley Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Discount?

I have had the Bostitch 2 in 1 nailer for about three weeks. It seems to be holding up well like most Bostitch tools. The only thing that I would like to change with the nailer is to have the trigger be a contact trigger instead of the sequence trigger. It is a good nailer for the money it costsI would highly recommend this nailer.

Save 48% Off

This is a lightweight nailer/stapler that can handle narrow staples and light gauge brads of up to 2 inches.

I have not used this tool much but about a third of my time so far has been spent fixing jams and the loading assembly. The loading magazine spring popped out, the magazine does not secure positively and it jams from time to time.

This is the worst Stanley branded tool I own. Looking for a replacement.

Ingersoll Rand F35341-400-VS 1/2-Inch Air Line Filter, Black

• Designed to remove airborne solid and liquid contaminants
• NPT of 1/2 inches, 197 CFM
• Element is a standard 5 microns
• Reliable manual drain
• Polycarbonate 1.9-ounce bowl with guard

The plastic bowl is sturdy and locks positively. Removes moisture enough for the tools i use (no paint or sandblast.) Without the auto drain its rather annoying to drain the bowl. When the system is pressurized it takes a lot of force to push in that drain. Without any pressure the collected liquid comes out rather slowly. I just end up taking out the bowl and dumping it out.

Buy Ingersoll Rand F35341-400-VS 1/2-Inch Air Line Filter, Black Now

I bought a series of these regulators and moisture traps, in less than a year, two of the inline filters bleeder valves went bad and one regulator came apart inside the housing and could not be fixed. these where not mistreated items they where kept out of the sun under cover, placed a long distance off the compressor to keep them cool, and the lines where bled at the end of every day. I paid extra for these items wich should have been a premium grade setup and have been very disappointed in there life span. When I contacted Ingersoll Rand they refused any replacement or reimbursement for every item that went bad and would not honor the warranty that came with the regulator or moisture traps.

Read Best Reviews of Ingersoll Rand F35341-400-VS 1/2-Inch Air Line Filter, Black Here

This is a very well made product that functions exactly as it should. It's used daily and protects my downstream air tools from any ick that may move through the airlines.

Want Ingersoll Rand F35341-400-VS 1/2-Inch Air Line Filter, Black Discount?

The lock/release button makes this unit MUCH easier to open than other types. Very easy to operate. Make sure you order the model with the correct inlet/outlet thread size for your application. Would be nice if it had a mounting bracket, but since I mounted next to the pressure regulator, it wasn't necessary. Also, this unit will not trap ALL moisture if mounted close to the compressor -as the air temperature drops downstream more moisture will condense out and you may still need another trap at the air tool.

It may earn 5 stars after I have had it awhile, but this review is based on just having recieved and installed it today.

Seems well-made and solid. Bowl appears to be a better design than the Miltons water separators I have been using.

Porter-Cable PCC583B 18-Volt Inflator (Tool Only, No Battery)

• Runs off an 18V Porter-Cable NiCad or Lithium-Ion Battery or your vehicle's 12V power adapter
• High pressure inflation for vehicle tires, bike tires, footballs or basketballs
• High volume inflation for recreational equipemnt like air matresses, rafts and pool toys
• Can be used for deflation using the high volume deflation connection making storing items away easier and quicker
• Automatic shut of feature shuts inflator off when required pressure is reached (needs to be set)

This is a great compressor. I need something I can use to air up my tires after airing down to go off-roading. It only took 5minutes to fill up my 31"x10.5" BFGoodrich all terrain tires from 22PSI to 37PSI. 5 minutes for 15 PSI means it will only take me 20 minutes to fill up all 4 tires after a day of off-roading. Since you can set the pump to shut off when the tire reaches a designated PSI you don't have to sit or squat by the compressor to keep an eye on the PSI, you can just set it and let it work until the jobs is done. When filling up the gauge will jump up and down by .5PSI, don't worry that's normal, it just means that the PSI is below X0.0 and above .5. The compressor is also quiet, it does not vibrate allot, and everything you need for it is on the unit itself.

Buy Porter-Cable PCC583B 18-Volt Inflator (Tool Only, No Battery) Now

This inflater is fast to air the tire. I previously have some 20 some bulks 12v inflaters, and they all took too much time to air the tire around 35 psi. This one is much quicker, and I think that it is almost as fast as the one in gas station.

The build quality is also better than other inflaters I used. The valve part is all mental, and this is the part that cheaper inflaters use plastic.

It is coming with needle to air sport balls.

It is also coming with accessories to air the air mattress or something alike.

I have porter cable 18v tools already, so the battery opreation brings lots of convinience. If you do not have porter cable batteries. Do not buy charger and battery alone, buy some porter cable tool set instead. You will find some tool sets are cheaper than you buy charger and battery indivdually. Research and caculating, and you will undertand what I mean.

Read Best Reviews of Porter-Cable PCC583B 18-Volt Inflator (Tool Only, No Battery) Here

Bought this item to inflate tires, water toys, boat fenders and in inflatable boat. Has done what I asked of it quite well. Good features include the easy conversion from high pressure to high flow because there are two separate hoses included and the ability to preset a desired pressure where the unit quits. I do wish it had a 110 volt option. I did not buy the battery pack or charger, but I do plan to decide if I need this portability later. The $40 purchase price is very reasonable, but the battery and charger add at least another $100 dollars unless you already have another PC tool with an 18 volt battery pack!

Want Porter-Cable PCC583B 18-Volt Inflator (Tool Only, No Battery) Discount?

I really like the feature that lets you set the pump for the pressure you want then just turn it on and it stops automatically when it reaches the desired setting. This makes it very convenient for keeping the tires on my suv at the right pressure for optimum performance.

Keep in mind the the battery and charger are sold separately. In my case this isn't an issue because a few years ago I decided to standardize on the 18 volt Porter Cable tools so I already have three chargers and half a dozen batteries that came with other tools.

Save 43% Off

This is an impressive little unit. I bought it mainly for my Bicycle shop and it works GREAT for inflating hi pressure road bike tires in a flash. I also tried it on my Nissan Titan and with an 18V NiCad battery for operation I was able to inflate from 30psi to 40psi in about 1.5 2 min.not too shabby. The digital pressure gauge is pretty acurate as well, but keep in ming if you use the auto off feature, then the tire will likely be about 2psi short after inflation is completed. You can attempt to compensate by setting the cutoff limit a bit higher or you can inflate manually ofter th e cutoff, whichn is what I do.

am very happy with this and allmy Porter Cable 18V purchases. For a homeowner/hobbyist, you cant go wrong. If I were using my tools 8-12 hrs/day like many contractors, I may have looked for something a bit smaller, but I do know contractors who use PC tools day in and day out. They are really nice for the price.

Stanley Bostitch SB-1664FN 16 Gauge Straight Finish Nailer

• 16-gauge straight finish nailer ideal for Interior/exterior finish and trim; furniture; cabinet work; and staircases
• Adjustable depth guide sets nails to desired depths quickly; quick-release nose door for fast jam clearing
• Features ergonomic comfort grip
• Kit includes finish nailer; 2-inch finish nails (1,000-pack); oil; convenient carrying case
• Weighs just 4-pounds; 7-year warranty

I already owned a Porter-Cable 16 GA. finish nailer, and we were starting a job to hang about 1500 square feet of boxcar siding in a rustic cabin. All I really wanted was another finish nailer that would shoot the same nails as my Porter-Cable. We use the Bostitch more than the original gun nowadays. It seems to drive the nails just a little deeper.

Buy Stanley Bostitch SB-1664FN 16 Gauge Straight Finish Nailer Now

I had given good results to this gun in an earlier review. It does fire very well when it works.

Mine stopped firing over the winter. Yesterday I called Bostitch to order an o-ring kit. It is not available. You must purchase o-rings individually. There are over a dozen o-rings in this gun.

I then decided to disassemble the gun and troubleshoot the problem. Everything looked good until I took the trigger switch apart. An internal ring had lots of slp in it and did not appear to seal as it should. I was able to buy an o-ring from my lumer yard for $.20 and it fixed the problem.

The gun fires as it did when I first purchased it.

Beware.......it will cost a minimum of... for a repair center to check this tool and then they will also have to order individual o-rings for it. Maybe Bostitch can fix this soon.

Read Best Reviews of Stanley Bostitch SB-1664FN 16 Gauge Straight Finish Nailer Here

Back in October 2002, I wrote a review concerning the incident I had with the part #06 blowing out on the nail gun. This is the main Butt cap on the end of the nailer. As I stated in my review, I was not sure if it was a manufacturing error or just a fluke. After extensive research and contacting many people using the nail gun, I had reached the conclusion that it was indeed a fluke. Today, March 23rd, A design engineer from Bostitch contacted me. It seems that they have been trying to reach me for several months and finally caught me at home. They had been informed of my problem with this nail gun and were extremely concerned. As per our telephone conversation, they have sold hundreds of thousands of these units and this was the first time they had heard of this incident concerning the end cap exploding from the back of the gun. As I told him, I had come to the conclusion that this was a fluke and I did not feel that it was a design flaw. I also apologized to him for not posting a follow up concerning my conclusion that it was a fluke. This I am doing now. IT WAS A FLUKE FOLKS. I have the big brother to this gun and have used it extremely hard and it is working fine with NO problems what-so-ever. I only wish I had kept the exploded gun so I could send it back to them for analysis. By the way, they are sending me a replacement nail gun free of charge. This I am happy about because I really liked that little gun. Handy, Light weight, easy to operate and I could see my nail supply in the slide loader. Most other guns don't have a view window. Anyway, Kudo's to Bostitch. Thanks for the followup. Much appreciated...

Want Stanley Bostitch SB-1664FN 16 Gauge Straight Finish Nailer Discount?

This is an excellent nailer, maybe the best on the market. Little or no recoil, no jams and the performance is excellent. Loading is a breeze and the lightweight housing is nothing less than a dream when working in tight places. Cannot imagine a better nailer and the people at Amazon were right on with their delivery times. Thanx Amazon and Bostich!

(using wife's profile)

Pro finish carpenter, used this gun hard for 5+ years. Shot thousands upon thousands of nails through it. Had to disassemble once because I dropped it and it started leaking air out nose, just had to re-seat some bushing/bumper and hasn't leaked for the 4 years since. A piece on the nail advancing spring wore out after 4 years and bostitch sent me one no charge next day air. Broke the piece that holds magazine (dropped again) and again bostitch got me the part right away no charge. I own two of these and really like them, I do own other brands as well (hitachi, porter cable, cadex, etc.)so I'm not just a bostitch nut. I have also used other brands of finish guns. Worked with a guy who used to buy the $300+ hitachi and senco and paslode guns and now buys the bostitch. You must (with any gun) tweak the driver blade before use: The blade itself is a hair too long and needs to be ground down about 1/16-3/32" and the shoulders need to be tapered furthur up or otherwise the driver blade will make a rectangular hole with wings instead of just a small rectangular hole. once you do that the driver blade makes a perfect impression exactly the size and shape of the head of the nail.

All Power America APG3301C 1,200 Watt 4-Stroke Gas Powered Portable Generator (CARB Compliant)

This generator is a great value for the price. I had a little difficulty getting it started when it first arrived, but as soon as I noticed the rubber fuel line was crimped, and trimmed the line a little, it started right up. I use this generator regularly to power a pitching machine, shop vac, etc. It is reliable and has a very good run time before needing refuel. Other generators might be a little lighter and maybe quieter, but this is an outstanding value.

I've only used it once so far, but it ran like a champ, and it's not too noisy. And, it's CARB compliant, which I had to have living in California. That tends to run up the price of a generator.

I had a little trouble getting it to run steadily until I figured out the choke. It is a heavy little monster55 lbs in a very small packagenot heavy enough to require wheels, so you have to lift it by the handle.

I was worried about using it to power my electronics (DSL modem, router, computer), but I emailed the company for advice and received a response in about 24 hours. Good support. They recommended using a line conditioner for sensitive electronics. As it turns out, the voltage coming out of mine is a bit high. If you want to power electronics, be sure to buy a line conditioner or voltage stabilizer along with it. I got a voltage stabilizer here on Amazon for $24.

Do be aware of the fact that 1200 watts is not a lot of power. You won't run a hot plate or a hair dryer with this generator. But computers, TVs, and low wattage fluorescent lights are no problem. I can power everything that is important to me in my study for about 350 watts. But check your wattage requirements before you buy.

Buy All Power America APG3301C 1,200 Watt 4-Stroke Gas Powered Portable Generator (CARB Compliant) Now

I bought this with great expectations and was very disappointed. The package showed up at my door dented and then when I opened up the package there were pieces of plastic all over and bits and pieces were broken. It started up easily the first time after some tinkering and then it just turned over the next few times I tried starting, without ever getting going again.

Read Best Reviews of All Power America APG3301C 1,200 Watt 4-Stroke Gas Powered Portable Generator (CARB Compliant) Here

Got it all sett up. Put oil in it. Poured in the gasoline. Pulled the starter cord and after about the second pull it fired right up. i was excited. I then moved it to the other side of my car and it died. So I tried to fire it back up again, playing with the choke a little, but it still would not go. Then I noticed the carberator was just pouring gas out. I dont know why but as long as the gas was in the on position gas was constantly dripping out of the carb. its now sitting in my garage as a heavy paper weight. Maybe I'll try to fiddle with it....

Want All Power America APG3301C 1,200 Watt 4-Stroke Gas Powered Portable Generator (CARB Compliant) Discount?

Please note that this generator has a fuel capacity of 1.19 Gallons, not 0.5 Gallons as stated above. Eight hours of run time for 0.5 gallons is way too efficient to be believed.All Power America APG3301C 1,200 Watt 4-Stroke Gas Powered Portable Generator (CARB Compliant)

Campbell Hausfeld PA116800AV 3/8-Inch Connect Kit, 5-Piece

• Outfit your compressor with 3/8-Inch adapters
• Includes couplers, plugs and adapters
• Durable quality is built to last
• 5 pieces included

I had previously Purchased Connectors from another supplier, but the fittings were not complatible with the connectors I already had on hand. Therefore, it was a pleasing "note" to obtain the proper fittings which I needed. Thank you. James L. Powell