- 5.0 SCFM at 90 PSI allows for quick compressor recovery times
- 200 PSI max tank storage pressure allows for longer air tool run times
- 78 dBA (tested per ISO3744) operational noise level for a quieter work environment
- Ehp Efficient high pressure technology delivers exceptional air-tool runtimes
- Oil free, maintenance free pump for convenient use;Efficient high pressure motor allows the compressor to be run with an extension cord (12 Ga. or heavier, 50 ft. or less) due to consistent amp draw requirements of the compressor
This is an excellent small shop / home air compressor. However, with that said, it's important to understand that it does have some limitations and is not designed to replace larger air compressors. With this review, I will try to give a thorough rundown and address both the pros and cons.
I grew up using your typical Craftsman 5HP 30 gallon air compressor. My dad bought it for the garage and I made use of it all through my teenage years of working on cars and fabricating. It required oil and was pretty loud. So, when I bought my own house, one of the first things on the list for the garage was my own air compressor. I almost bought a Craftsman unit from Sears, but after reading the terrible reviews about the model(s) I was considering, I decided to keep shopping. Based on the reviews here on amazon, it seems the quality of the recent Craftsman air compressors isn't what it used to be.
After deciding not to purchase a craftsman unit, I checked into several other brands. One of the units which always caught my eye was the 200 PSI Dewalt unit. For one, it was an upright unit, so it didn't take up nearly as much space as the sideways type. Also, it was higher pressure and smaller than many of the other brands. Overall, however, it seemed very well made.
One concern I had was the fact that it didn't use or require any oil. In fact, this worried me so much that I actually called Dewalt and spoke with their technical support department about how that works. I was told that coating technology had come a long way and this allowed them to produce a piston that didn't require any oil. I also asked them about how much use the unit could stand and they assured me it would stand up to most any home use. The person I spoke with explained that this unit was designed to be used at a job site and that it was intended for heavy use 5 or more days per week, even though it didn't require all that much maintenance. The impression I got was that it was designed to basically roll out of the box and be ready for use at a construction site even when put into heavy use.
One thing the Dewalt representative did say was that it was very important to properly break the unit it. This consists of running the unit for 15 minutes with no load (and the drain valve open on the bottom) when you initially fire it up. I followed the directions in the manual to the letter and have since had zero problems. Let me tell you, running your air compressor for 15 minutes seems like a very long time! :-) However, from what I understand, this break-in process is very important to ensuring that the unit operates properly over its life.
As mentioned, one of the nice things about this unit is that it's relatively small. It doesn't take up much in the way of space. The construction is very nice and the unit is clearly heavy duty. I believe one of the other reviews mentioned something about the drain valve on the bottom touching the ground because the wheels aren't high enough. This is indeed the case, but it doesn't really matter, since you generally have no need to open the valve on the bottom all the way. In fact, when bleeding the tank, you usually only open the valve about 1/2 or 1/4 of the way, since this allows the unit to decompress slowly and helps to avoid the outlet from icing over due to air exiting too quickly. As such, the fact that the tip of the lever touches the ground is really a non-issue.
In any event, one of the great things about this air compressor besides its high quality design and construction is that it's incredibly quiet. I would say it produces about half the noise (if not less) than a similar Craftsman unit. It's difficult to explain exactly. Obviously, the unit makes noise. However, it's noticeably quieter than other models. Let me put it this way: when running the unit in my garage (with the garage door open), it can barely be heard from a distance of about 150 feet. With the garage door down, I can actually run it at night and it's difficult to hear from a distance of even 50 feet away from the house. As such, I'm able to work into the evening without the fear of the neighbors hearing the compressor. Again, the unit does make noise, but for an air compressor, it comes in at a much lower sound level than most.
The fact that this unit requires no oil is a joy. The previous compressor I used always required oil, which is a hassle. The Dewalt unit does not. In fact, aside from draining the tank (i.e. letting the air out) at night, there really isn't anything you have to do.
The Dewalt D55168 compressor is rated at 200 PSI however, that's tank pressure, not hose pressure. In other words, you can't dial the regulator up to where you are supplying a full 200 PSI to your tools (nor would you want to). So the tank does charge up to 200 PSI, but the pressure available via the hose is more like 125 or 130 PSI (as I recall it might go as high as 150 PSI). This isn't any problem, however, since most air tools only call for between 50 and 80 PSI. Even when blowing out parts, 100 to 120 PSI is plenty. Basically, the pressure available at the hose is the same as most other compressors.
This air compressor is outstanding for several functions. For filling up tires, it's great. For blowing out parts, it's wonderful. It's also perfect for running air ratchets and impact tools (such as impact wrenches). The recharge is pretty fast and when using something such as an impact wrench, it works quite a while before the tank kicks back in.
So, if you are looking to have compressed air for blowing out parts, filling up tires or running an impact wrench, then this compressor is outstanding and fits the bill perfectly. However, if you are looking to run your die grinder, air sander or rotary grinder, you are going to be a bit disappointed. Tools that suck a lot of air in and spit a lot of air out (which includes most continually spinning tools, such as grinders and sanders) pull too much air for this smaller size compressor. If you attach a die grinder for example and start cutting away at some mild steel, you'll quickly find that the compressor is running nearly non-stop to attempt to keep up. On the other hand, if you are using an air nailer, you should be fine.
So the bottom line is this: if you are looking to blow off parts, fill up tires and run a few ratchets and/or impact wrenches, then this compressor is fantastic. It requires pretty much zero maintenance and is very quiet. On the other hand, if you are looking to use air tools to sand or grind down welds or you are thinking you can run your air powered die grinder all day, then you are most likely going to be sorely disappointed and should probably look for a higher HP and larger tank compressor.
Myself, I love this compressor and simply have switched to electric powered grinders for jobs such as cutting and grinding (since they generally do a better job anyway). The dewalt provides compressed air for jobs that really require it and it does so with no hassles or complaints. As long as you aren't looking to power a shop full of grinders and sanders, then the Dewalt D55168 is hard to beat when it comes to a small/quiet air compressor for the home, garage or small job site.
Buy DEWALT D55168 200 PSI 15 Gallon 120-Volt Electric Wheeled Portable Workshop Compressor Now
We've had our DeWalt D55168 for about three weeks now and love it. It dose everything well and it may be the perfect home or small business work shop compressor. It is easy to move around and you can use a 12 gage extension cord if needed to power it. However there are a couple of things to know before you buy one. One is the drain valve is to close to the floor to work properly. So we built a ramp about one inch tall for the D55168 to set on and that solved that little annoyance. Seems that DeWalt would just put about one inch taller wheels on this compressor and that would fix this little problem too? The next thing is there is a fifteen minute break-in with the drain valve open. We would not have known this if we wouldn't have read the instruction manual first. The third thing is, 'quite' it is 'Not' it may be about 25% less than our old Porter Cable 4 gallon air compressor? There is plenty of sound left in this motor to have no chance of hearing your fm radio when it's running. But having said all that this is a fine compressor and wouldn't trade it for any other 15 gallon compressor out there right now. The only other thing that since the other two reviewers have talked about the price. We paid $319.95 from a local Home Depot store. In this case it may be better to look for this compressor from a local store rather than Amazon.com. They are asking $359.99 + $99.00 shipping and 'No' return! We don't understand this one? So we had to pass buying form Amazon this time. But most of the time we have been very happy with Amazon's prices and service.
Read Best Reviews of DEWALT D55168 200 PSI 15 Gallon 120-Volt Electric Wheeled Portable Workshop Compressor Here
Use caution. I just sent the second one back to Amazon. Both units were obviously damaged prior to shipment, as you could see where some other party received the same non-functional unit prior to me, and returned it in the re-taped box 3 or 4 times. I used the identical compressor of a friend, and knew this is just what I needed. Unfortunate for me that Amazon is dealing with a supplier such as this one that I had to go through. Definitely buy a Dewalt compressor, but think about an alternate source. Amazon was willing to take both units back, but having the frustration and downtime to return both units make this transaction undesirable.
Want DEWALT D55168 200 PSI 15 Gallon 120-Volt Electric Wheeled Portable Workshop Compressor Discount?
I just picked mine up at Rockler Woodworing for $249 and they threw in a $50 gift certificate. The item was in excellent shape. The reason I'm giving it a four star rating is that it is not as quiet as I though it was going to be; however, it is much quieter than the old Sears model it replaced. The second reason is the drain valve on the bottom can not be opened completely unless you prop up the front feet two inches, which is a little dangerous since it throws the unit slightly off balance poorly engineered!. They should have made the wheels a little bigger or placed the tank slightly higher. Aside from these two small problems, this is a beautiful piece of equipment and the perfect size for my shop. Follow up-after three weeks of use. I don't have any regrets purchasing this compressor. I like it more every day I use it. It holds an icredible amount of air and never seems to run out of breath.
Save 47% Off
I have had this unit for about 2 years and used it only on a DIY basis with a total of maybe 30 to 40 hours. Last week started it for some air for a blowing job and at about 120psi motor statrted to cut in and out, run slowly and make a very bad noise, so shut it down. Opened the cover and there were no visable falts other than brush sparking.
From the noise, sparking and reduced speed, I'm sure the motor is bad. Tried to buy a new motor and much to the surprise of the DeWalt service Center teck, there is no motor avalable. I consider not having complete parts avalability a totally unacceptable business practice on DeWalt's part. Is this an other case of the bean counters killing a product and in the end a company?
