Milton Snubber Air Hose - 30in.L., 3/8in. I.D. x 1/4in. NPT Swivel, Model# S-680-2

• Sold Individually

First, what's pictured is the 1/4" version. The 3/8" version I received is of course thicker, but uses a black hose instead of red. Hose is marked Made in USA. While the flex/swivel doesn't move as far as some cheaper snubber hoses, the orifice inside the flex joint is much larger. This should result in less restriction of airflow. I got it because the manufacturer of my air couplings recommends a snubber hose like this between the coupling and any impact tool. A side benefit is the added flexibility.

Save 26% Off

WL015303SJ Campbell Hausfeld Kit With Fan and Valve

• Campbell Hausfeld Kit with Fan and Valve
• Fits Campbell Hausfeld, Husky, Sears plus others

The Campbell Hausfeld WL015303SJ Belt Replacement Kit worked perfectly. It contained all of the necessarry parts needed to get my air compressor back to excellent running condition. The service time and price was very good. It turned a very unpleasant experience into a tolerable necessity. I highly recommend Amazon for replacement parts needs.

Sincerely,

Jeffer P

Virginia

Buy WL015303SJ Campbell Hausfeld Kit With Fan and Valve Now

This kit has everything you need to repair the associated Campbell Hausfeld compressor, including some handy instructions; however, I found the repair (belt replacement) impossible to accomplish.

The bolt that holds the pulley in place (which must be removed to replace the belt) was impossible to remove. I used the correct size torx bit and a lot of gentle persuasion (including a blowtorch to heat the bolt), but the head stripped out. If you're getting this for a belt replacement, I highly recommend that you try to remove the pulley bolt first. If you're able to do it, then order the kit. In my case, I wasted my money and will have to buy a new compressor because the bolt is either way overtightened by the factory or seized/rusted in place. Drilling it out won't work because the threaded end will still be stuck inside. It is NOT coming off. Be sure to find out if yours will before you order.

I deducted one star because the instructions could be clearer, but they are adequate and a nice inclusion.

Ingersoll Rand W040-BOOT Tool Boot for W040 1/4-Inch Impactool

• Vibration-damping impact drive boot for the W040 impact tool
• Provides added ergonomic comfort by absorbing vibrations
• Protects the tool from dirt, grim, wear and tear, and accidental external damage
• Easy-to-see color
• 1-year limited manufacturer's warranty

Fit perfect!***** This is a must for the protection of your tool. If you are like me when I do the dredad work the tool and I are all over the ground or floor.

Buy Ingersoll Rand W040-BOOT Tool Boot for W040 1/4-Inch Impactool Now

If you have the tool you realy shoukld spend the extra couple of dollars and look after it.

I just wish all tool makers would do similar extra's.