Rockford CAT944 1 Gallon Air Compressor

• User friendly design
• Easy to read pressure gauges
• Portable design makes this air compressor easy to carry, store, and use
• 100 max PSI
• 1 Gallon tank provides greater stored air power and eliminates the pulsations caused by piston action

This little guy is kind of loud, but it has reason to call attention to itself. It's a great little compressor. It took it about four minutes to build up 80 psi in the reservoir from dead empty, allowing use pretty quickly. It kept up with the demand of tire filling and a pneumatic stapler with no problems. This is all I've used it for so far, but I have no reason to think it won't perform equally well with other tools. The regulator seemed like overkill for me and my uses, but it's a good thing to have if you're going to use it with a low pressure paint sprayer. The twin gauges show the tank and hose pressure, a handy reference. It also has an over-pressure release valve, a good safety feature. It's light and easy to carry around the house or job site. For the price, it's a much better deal that the 12 volt compressors as similar prices and claiming higher psi --but can't provide it. This is a solid little performer and I'm glad I chose it.

Update: 10/2012

I have to say I'm a little disappointed. While I don't use the compressor a lot I have noticed that it steadily lost its ability to generate the pressure I did when new. As it sits now, I can't inflate my mobility scooter tires to the 30 psi they require, the compressor barely getting up to 20 psi. It will still operate my pneumatic tack driver, but won't operate any of the other tools and I wouldn't try to paint with it. I gave this five stars initially, but I have to knock it all the way down to a single star. Truthfully, I would recommend against anyone buying this compressor after seeing how such low and gentle use wore it out in no time at all. I got a message from Amazon saying that someone found my earlier comments useful, and I would hate to think anybody got taken because of my earlier review.

Buy Rockford CAT944 1 Gallon Air Compressor Now

No more air cans, does what I want very well, clean computer parts, is fairly quiet, cuts of automatically, adjustable out valve and very well built. Love it!

Epilog :The first compressor I received was DOA, so I returned it and Amazon had a replacement on the way the same day

I filled the RMA and it arrive in two days. I worked great for three months and then one day started to use it would not compress more than 5 lbs. I checked every thing and had followed all the instructions. Right before it failed it started

restarting, restarting, like it was loosing compression. Any way it is dead. It is not worth repairing. I will use what parts

are of use and rest goes to junk.

Read Best Reviews of Rockford CAT944 1 Gallon Air Compressor Here

I just received my Rockford 1 Gallon Air Compressor and absolutely love it! The set-up was very easy (even for me being a female), and since this item includes all inflation accessories, it is ready to use right out of the box! Not to mention, it even has a storage compartment to keep all accessories in place and accounted for. I quickly put this product to action by topping off my vehicle's tires (I try to do this often to enhance gas mileage) and inflating all the toys and sports balls for my grandchildren. I was able to complete these tasks with no problem at all. With all the grandchildren I have, this will save me a tremendous amount of time! In addition, it will help maintain my vehicle's tire pressure as I need to save all the money I can in this economy! I will also use this product to complete some airbrushing (I make cakes in my free time), and may even tackle some projects requiring a pneumatic nailer in the future. This is an inexpensive/quality product that is sure to save you money and time! I highly recommend this product to anyone! With Christmas right around the corner, this would be an excellent gift!!!

Want Rockford CAT944 1 Gallon Air Compressor Discount?

I had difficulty getting all of the unions tight enough to prevent leaks. The compressor is not very powerful and takes a long time to come up to full pressure. Even then, the pressure doesn't stay up when using even a pin nailer! Totally unable to use as blower to clean out crevices, etc.

I ordered this shipped to my son-in-law ain another state. Shipping was precise

and rappid.The product was excellent. All that was advertised. He is extremely pleased and I also.

Mi T M Corp 2Hp 110V Compressor Ac1-He02-05M1 Air Tools Rental Items

This compressor is everthing I thought it was going to be. It works great, not too loud not too heavy. I bought a Mi T M gas powered wheelbarrow type compressor 8 years ago don't use it everyday but use it a lot. Have only had to replace the regulator, not even a belt. This company makes very good products and is made in USA. It cost a little more but is built ten times better than that junk from China. Even the EMGLO'S are made in China. SUPPORT AMERICA BUY AMERICAN !

Fantastic output and low noise level (compared to some other compressors) paired with the portability of a 50 pound compressor makes this a great product. Was a little apprehensive not having heard of the company before, but this thing is built rock-solid -not like the cheap stuff at the local megalow mart.

Buy Mi T M Corp 2Hp 110V Compressor Ac1-He02-05M1 Air Tools Rental Items Now

I bought this compressor new from Amazon this past summer.

Small Complaint: There is a 4" diameter blotch of rust on the tank that has caused the paint to bubble up. It's right on top where it's quite visible. I ordered the compressor for work and couldn't take the time to send it back. I had to use it immediately. Now I live with a tank that wasn't properly corrosion treated, and which is rusty as new from the factory (yes it came that way).

Bigger Complaint: The oil viscosity of the pump causes the motor to overload in cold weather. I am looking for a fix for this now. I just had the compressor in the repair shop (under warranty) for two weeks. They called yesterday and said it was just a thermal overload button that had to be reset.

The thermal fuse kicked in because the oil gets hard in cold weather.

The thermal fuse reset button is located inside the compressor. Disassembly is required to simply press this reset button.

I am a little bit disappointed that this is not the world's greatest portable compressor, which is what I was led to believe when I purchased it. I now have one more project on my hands: to see if changing to a lighter oil will void the warranty, and if it will shorten the lifetime of the compressor.

Read Best Reviews of Mi T M Corp 2Hp 110V Compressor Ac1-He02-05M1 Air Tools Rental Items Here

Manchester Tank Vertical Air Receiver 60 Gallon 200 PSI w/ Base Ring & Top Plate

• 60 Gallon Capacity
• Includes Base Ring & Top Plate
• ASME Rated Tank
• Please call 800-658-3579 for higher PSI or Tank over 240 Gallons
• MAWP:200PSI

I pulled one star only due to the premium price of the unit and the shipping costs that were more than I really wanted to spend. I have a now two year old Emax 7.5 HP 80 Gallon 1PH Horizontal 2 Stage Stationary Air Compressor in a large garage behind my home, but I had been previously using a nice small portable unit I had purchased many years back from Grainger Inc. This old portable was going to be incorporated into the garage on my home due to the small footprint and excellent running characteristics after some remodeling.

As I was remodeling the garage at my home, I installed a 240 volt outlet for the 20 gallon compressor and plugged it in. It began running as nicely as ever, but something was wrong. I noticed a few drops of moisture had leaked onto the floor from the bottom of the tank and found air was leaking from a pinhole in the bottom of the horizontal tank. This unit was old, but it still looked nice new even. Lol, I remembered that the tank was not ASME rated, and was only good for a maximum of 150 PSI. I recalled being disappointed long ago when I noticed that tank wasn't one of the better ASME ones, but thought keeping it well drained and maintained would keep it going just fine evidently good care wasn't enough for the thinner metal of this OEM Speedair tank. Some years back the original single stage compressor had blown, and I had replaced it with a newer (and much better) three cylinder 2-stage model with correct dual A-belt pulleys. I never used it much after replacing the compressor, so it sat idle a lot and hadn't been used at all since I purchased the new Emax. Unknowingly and silently, the tank of the old Grainger model was rusting away from inside.

I had set the controls with the installation of the 2-stage compressor to cycle at 110/130 PSI on/off. Old enough to know what can happen trying to use a weakened pressure tank, I knew better than to attempt a repair. That bad tank was a real let down as I was ready to put that unit back in service and had already serviced it with fresh synthetic compressor oil, new air filters, new Goodyear hose and fittings, and had even polished it all up. Add that to my remembering having paid Grainger over $600 for the original portable compressor, $300 for the 2-stage replacement parts, and I figured I had well over $900 sunk from sight. Knowing what new two stage compressor units cost, and knowing the rest of my components were still in perfect shape, I started looking for a tank.

I thought I would find something around $200-$300. Uh yeah, I found those prices if I didn't mind dealing with someone operating a website from a house, or working a vacant warehouse street corner. It took a while, and more studying, but I finally decided to cough up the cash for this Manchester 60 gallon 200 PSI tank. I certainly didn't want anything that could be a problem of any kind.

This 60 gallon Manchester model (302412) has a 30-inch by 13 1/2 compressor top mounting plate which is more than the 24-inch by 10-inch top plate I needed for mounting my compressor, and the electric motor a nice thick one too. This size can also easily support larger compressors in the 5-7 horsepower range. I didn't want to weld the old top plate on after having to cut it off the old tank, although I could have bought a lower priced Manchester model without the top plate. I wanted this new tank to look as good as my old compressor and its electric motor with the controls and I wasn't about to "rig" up something that didn't look factory. The increased size will also produce more air flow for intermittent use than the old 20 gallon tank ever could also keeping heat down with less frequent motor starts. The overall improved cooling should also cut down cut down on moisture in the air lines with the compressed air supply staying cooler. Overall height is 52 1/16-inches, and my compressor setup will add another 13-inches. So, my assembled unit works out at only just over 5-feet.

It's not portable by any means, with a tank weight of 192 pounds, but this Manchester has sturdy legs and a bottom fitting that will accept an electronic purge valve to keep the water drained out without me physically doing it. Periodic motor, belt, and compressor service will be easier with the vertical tank height. Even the floor footprint is small at only 20-inches which is less than the old portable. It also has nice inspection ports and a good number of fittings in all the right places. But what sold me was the weight and the gauge of the tank. The rating is also 200 PSI @ 650 degrees Fahrenheit, where most other ASME tanks are rated at only 400 degrees Fahrenheit. Quality always comes with a price, but it offers a much longer service life and greater safety. I figure this tank will far outlast me, considering the old OEM unrated Speedair tank lasted well over some 30 years. That works for me! I just hope some family member appreciates it after I've shuffled on.

... In the meantime, the old internally rusted 20-gallon tank won't go to waste. I plan to make it into a nice barbecue grill/smoker. That should help settle my stomach after watching my cash taking a hike because of it. I'm already salivating.

I'll be adding more here later, as I am currently waiting for delivery from Amazon retailer PneumaticPlus. I just thought I would share some of the specs, my knowledge, and my story, for the interim.

Update 8/23/2012:

Wow, I really have to hand it to Amazon order processing and shipping from PneumaticPro with Roadway. I ordered on the 18th and I picked up my tank today (the 23rd) only five days later by truck freight, and 425 miles away from the Bedford, Indiana facility. Amazon had predicted delivery from the 27th to the 30th. Yes, home delivery is included in the shipping, but I would have had to wait until the following day and it was more convenient for me to just pick it up earlier at the terminal. The order processing went very quickly.

The tank arrived with metal band straps holding it securely to a very strong pallet. Everything was in excellent condition at my inspection. The inside of the tank was sealed with plastic caps at all openings, and the tank was spotless inside so I could easily apply an interior coating if wanted. With some very light sanding and some touching up of the gray exterior primer coat, I'll be able to quickly apply a perfect topcoat of my choosing to have a great looking tank under my compressor setup. The very sturdy top plate even has multiple long slots in it to accomodate most any electric motor combination and larger horsepower frames. All that there is left to do is drill the plate mount for the compressor. Actual assembly of the entire unit will be very quick and easy due to the well thought out placement of ports, port sizes, and the factory installed top plate. The only downside is the tank comes without any of the fittings meaning you will have to provide your own fittings with ratings of 200 PSI and greater. This ran me about an additional $100 to purchase those fittings new, as those I had from the smaller tank being replaced weren't large enough.

Fitting ports on the tank:

(1) 1/2" NPT bottom (tank drain)

(3) 3/4" NPT both sides and top

(1) 1/4" NPT front top (where I used the 2-1/2" Oil Filled Pressure Gauge SS/Br, 1/4" Center Back, 0-200psi)

(2) 2" NPT front and side inspection ports (I used this fitting Anvil Malleable Iron Pipe Fitting, Class 150, Square Head Plug, NPT Male, Galvanized Finish)

Note: The threads come lightly coated with a pipe joint compound. You should clean this off and use thread tape. Using thread tape will facilitate easier removal of a fitting if needed in the future. Using high pressure rated brass and schedule 80 brass for nipples will also help where their use is possible.

WL015303SJ Campbell Hausfeld Kit With Fan and Valve

• Campbell Hausfeld Kit with Fan and Valve
• Fits Campbell Hausfeld, Husky, Sears plus others

The Campbell Hausfeld WL015303SJ Belt Replacement Kit worked perfectly. It contained all of the necessarry parts needed to get my air compressor back to excellent running condition. The service time and price was very good. It turned a very unpleasant experience into a tolerable necessity. I highly recommend Amazon for replacement parts needs.

Sincerely,

Jeffer P

Virginia

Buy WL015303SJ Campbell Hausfeld Kit With Fan and Valve Now

This kit has everything you need to repair the associated Campbell Hausfeld compressor, including some handy instructions; however, I found the repair (belt replacement) impossible to accomplish.

The bolt that holds the pulley in place (which must be removed to replace the belt) was impossible to remove. I used the correct size torx bit and a lot of gentle persuasion (including a blowtorch to heat the bolt), but the head stripped out. If you're getting this for a belt replacement, I highly recommend that you try to remove the pulley bolt first. If you're able to do it, then order the kit. In my case, I wasted my money and will have to buy a new compressor because the bolt is either way overtightened by the factory or seized/rusted in place. Drilling it out won't work because the threaded end will still be stuck inside. It is NOT coming off. Be sure to find out if yours will before you order.

I deducted one star because the instructions could be clearer, but they are adequate and a nice inclusion.

Performance Tool W10058 3 Pc Air Tank Accessory Kit

I found the gauge size was the only fault.the 1/8 inch .on my air tank i have 1 / 4 inch port size instead of the 1/8 i prefer the 1/4 gauge size porting.i think the port size and gauge size should be listed on the discription of the unit

Stanley Bostitch PN50 Mini Impact Nailer

• Rubber grip designed to insulate and reduce vibration
• Weighs only 1 lb.
• 360° swivel air fitting for maximum accessibility
• Front exhaust directs air away from users palm
• Drives most common bulk finish, framing & timber nails

I giggled the first time I used this, it drives nails with such ease as if the wood was butter.

It's great for metal fasteners and tight spaces, it gets into all the small corners where neither a full size nail gun nor a hammer would fit.

The small size is a perfect fit for my (large) hand, and squeezes into smaller places than the larger model palm nailer.

The magnet holds the nails well so you can drive them with one hand, just press and the nail is quickly hammered (vibrated?) into place.

You can stop early and leave the nail head up if you're just tacking things, or come back later and finish the nail flush.

Buy Stanley Bostitch PN50 Mini Impact Nailer Now

This is another product that I give 5 stars, not because it is the best on the market (not industrial quality) but is a good deal for the low price. I had a project where I needed to drive 240 nails in tight, overhead areas could have done it with a hammer but my wrist and shoulder hurt just thinking about the prospect.

Had this puppy in a couple days with Amazon Prime, quickly reviewed the instructions and 45 minutes later had the job done didn't even break a sweat.

Will probably submit a video of this in action because you have to see it to believe how easy it makes a job like this.

One word of caution, read the instructions about how to insert the nails. It's pretty easy to accidentally "fire" this thing if you are not focused every time you load a nail and I imagine even a preacher would have some choice words if it fired with his/her finger over the nail point.

Read Best Reviews of Stanley Bostitch PN50 Mini Impact Nailer Here

I was very impressed with both the size and the power. Was able to sink a 3.5" spiral shanked nail with ease. The only disappointment is that the nail opening is rather narrow. The majority of common framing nails will fit, but if you try something with a bit larger head, it won't. Forget Roofing nails! This is the only palm nailer I've used, so I don't know how the opening compares to other brands/models. The speed of this nailer does not come close to a good nail gun, and the fatigue factor will be a lot higher. So it's great tool for tight places, and small to moderate volumes of nails, but if you are doing a large project, you might want to consider a stick nailer (preferable in addition to this nailer).

Want Stanley Bostitch PN50 Mini Impact Nailer Discount?

This thing is too fine! When a hammer or nail gun won't get to the nail, this will. I just used it to install an electric box in an 8" stud space in a corner with a wall that prevented any kind of hammer or even a screwdriver from working. It's simply amazing. All of this comes from a guy who has been doing this kind of work for 40 years and who owns a gas powered nail gun, air powered nail guns and all kinds of hammers.

You may not use this baby every day but when you do have a need, nothing else will get the job done.

Did I mention that it's very ergonomic in its shape?

Buy one and don't look back!

Save 15% Off

This is a perfect little nailer that does the job with any size nail. I've shot joist hanger nails up to 16d common any they go in very fast.I am extremely pleased with this nailer.