Ingersoll-Rand 231-TK2 Tune-Up Kit

• 1/2" Impact Wrench Tune-Up kit for use with Ingersoll Rand 231C, 231HA and 231HA-2 Impact Wrenches.

If you look at the picture you are lead to believe it comes with the bearings.IT DOES NOT ! other than that it is complete enough to rebuild the product just dont expect the bearings.

Buy Ingersoll-Rand 231-TK2 Tune-Up Kit Now

My gun was always the strongest in the shop for about 25 years and then it started to die slowly. I rebuilt it with this kit and now for the last three years it has once again risen to being the top performer in the shop used daily.

Read Best Reviews of Ingersoll-Rand 231-TK2 Tune-Up Kit Here

It worked but it is not like the picture. You do not get all the pieces shown in the add. So make sure that this is what you what you want.

Want Ingersoll-Rand 231-TK2 Tune-Up Kit Discount?

have an old ir that was very week that i got on trade and rebuilt it but still not that powerful. it got better but still not that powerful. so in the end i bought a new one as im an auto mechanic and love the brand. but at a certain point just get a new one. there very good when new. my old one was just too worn out.

Hardcore Tools® Dual HARDWOOD FLOORING AIR Flooring Cleat Nailer / Stapler Gun Kit

• 2 in 1 Flooring Cleat Nailer / Stapler gun at fraction of the cost of a Bostitch Stapler! Light weight die-cast aluminum body. Hardened Driver Blade.
• Long reach handle for increased comfort and added control. Operates with any standard compressor using pressure of 60 to 100 psi. High-capacity magazine reduces reload time. Colors may vary!
• Non-marring adjustable base plates allows for 1/2 to 3/4 inch hardwood floor installation. Precisely drives staples at proper angle and depth
• We currently ONLY ship these TOOLS inside USA via fedex ground. QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!!
• Returns for UNUSED PRODUCT in ORIGINAL PACKAGING. MUST be within 7 DAYS from the date of PURCHASE.

Haven't had it long but works really good. No Jams or problems.

Installed Red Oak hardwood and it's looking great.

Buy Hardcore Tools® Dual HARDWOOD FLOORING AIR Flooring Cleat Nailer / Stapler Gun Kit Now

I rented a Bostitch MIIIFS for the weekend to install hardwood floors and realized that it was going to take me a bit more time to complete the job.

After shopping around I found the Hardcore Tools HARDWOOD FLOORING AIR NAILER STAPLER. At a third of the price to buy the Bostitch and less than the cost to continue renting, I made the purchase.

The Hardcore stapler has a lower profile rear and forward allowing you to use it on the second row to and from the wall instead of the third row with the Bostitch, with our 3 ¼" boards. The Hardcore stapler is also lighter, reducing fatigue for this part-time-do-it-yourselfer. Quality is also good, and has held up well under my amateurish handling. This unit came with a great storage case, oil, spare base plate, and goggles making for a nice bundle.

The only minus to this tool is that it is less forgiving than the Bostitch in placement on the board, so I found myself having to adjust its position to avoid misstapling.

Overall, I am pleased with my purchase and would recommend this stapler for the casual home remodeler.

New Classical Style V Belt A90 A-90 4L920 1/2" x 92

• Brand New Classical Style V Belt A90 4L920 (1/2" x 92")
• FREE SHIPPING
• These are Classical Style V Belts... Not FHP. Classical Style are better quality
• 90In inside diameter. 92in outside diameter

Go to youtube and copy and paste in

Hill climb and snow bank jumps

Look for the video made by redneckcomputergeak

It easily handles my off rooding needs and does not heat up at 20 mph. Has great grip and well enforced Kevlar backing

Save 28% Off

Ingersoll Rand W040-BOOT Tool Boot for W040 1/4-Inch Impactool

• Vibration-damping impact drive boot for the W040 impact tool
• Provides added ergonomic comfort by absorbing vibrations
• Protects the tool from dirt, grim, wear and tear, and accidental external damage
• Easy-to-see color
• 1-year limited manufacturer's warranty

Fit perfect!***** This is a must for the protection of your tool. If you are like me when I do the dredad work the tool and I are all over the ground or floor.

Buy Ingersoll Rand W040-BOOT Tool Boot for W040 1/4-Inch Impactool Now

If you have the tool you realy shoukld spend the extra couple of dollars and look after it.

I just wish all tool makers would do similar extra's.

Grex G-MAC.P G-MAC MAC Valve with Quick Connect Coupler and Plug, for Paasche Airbrush and Hose

• Gives you the freedom to put airflow control on any of your airbrushes, instead of being restricted to a specific airbrush
• Comes as a quick connect air coupler allowing you to easily switch between airbrushes to give every airbrush the ability to control airflow
• Attaches to the air inlet of your airbrush. Provides better balance compared to having the airflow control below the head of the airbrush
• Designed with a large dial to allow easy air pressure adjustments. This is helpful when spraying and adjusting air pressures simultaneously
• Capable of achieving fine adjustments to give precise air flow control. Three full dial rotations to change from zero air flow to full air flow

I bought the GREX because the generic product had a bunch of reviews stating that "It was bent" on delivery. Works just as advertised, nicely made product.

Buy Grex G-MAC.P G-MAC MAC Valve with Quick Connect Coupler and Plug, for Paasche Airbrush and Hose Now

must have for anyone who is using an airbrush, if you have never used a quick disconnect you will immediately see the benefits of this type of system

The Souce OA-BRACKET10 Vehicle Bracket for The Source High Performance Air System

• Holds 10 # Tanks
• Mounts Easily to Vehicle Floors
• Aluminum Alloy Construction
• Hammer Coated Finish
• Can be used in conjunction with Roll Bar Mounting Clamps

This tank bracket will hold your tank securely, but it is poorly designed with little thought on how it will be used in many different vehicles and applications.

1st. The bracket securing strap uses a lever/fulcrum method to make sure the strap holds the tank very very tightly. And it does work, you can off road with this bracket and be certain your tank will not move. However, the strap itself needs a ton of room to work properly therefore limiting your mounting options to very large areas only. Basically you need the width of the bracket times 2 to mount and be able to use it. you can mount it horizontally, but the strap must be able to open upwards.. so you have only one option to mount it.. bracket lever upwards. If you are trying to mount in a tight spot pick another bracket.

2nd. NO THEFT PREVENTION FOR YOUR EXPENSIVE TANK.... The co2 tanks cost anywhere from 200.00-500.00 bucks. And the bracket itself is 45 bucks. Are you telling me that they never thought about theft prevention? They need to add a small hoop for a padlock or something so someone doesn't just walk up to your truck or jeep and walk away with your tank in 5 seconds flat. The bracket bolts into your truck so it it safe... but the tank is free for anyone to steal.

This bracket is solid as heck, and if you can find a place to mount it and pay a welder 40 bucks to add a bracket then you will like it. otherwise keep on looking.

Buy The Souce OA-BRACKET10 Vehicle Bracket for The Source High Performance Air System Now

The first reviewer was pretty accurate with his review, but there are updates I would add.

1) I was frustrated with the lever strap for about 15 minutes, because I don't have room to fully open the lever. This seemed like an impossible hurdle. However, I realized that the strap did not need to open to remove the tank. You simply release the lever, which loosens the strap, then pull the tank up and out. This method is easier than fully opening the strap each time, then having to fully close it each time. There is little need to remove the tank for my purpose, except to have it refilled. I use it to air up my tires after running in the soft sand. The hose is long enough to reach all four tires. Even still, I can easily remove the tank if needed.

2) The locking problem is an issue. There is a very small hole that could take a pull pin to keep the strap from opening, but not big enough to accept a padlock. It looks like there is a way to lock it down with something but I haven't really tried yet. I plan to run a 20mm cable lock through the carry handle and around my chase rack tubing. Padlock's are as safe as zip ties when it comes to anyone really wanting your stuff. It would take someone 6 seconds to cut the lock and take the tank.

The Power Tank mount looks much better built, but then you get what you pay for... Get a Power Tank if you want a Power Tank mount. It also comes with a loop for a padlock. It only costs about $200 more!