Air Compressor Fittings 25.7mm Male Thread Plastic Oil Level Sight Glass

• Product Name : Oil Level Sight Glass;Fit for : Air Compressor
• Material : Plastic;Color : Silver Tone
• Thread Diameter : 25.7mm/1'';Total Size : 37.7 x 22.3mm/1.48'' x 0.91'' (Max. D * H)
• Weight : 6g
• Package Content : 1 x Oil Level Sight Glass

product received as described, but did not seal properly; believe to be a defect in the sealing surface on the compressor or o-ring as the original leaked also. Finally epoxied the outer edge to seal.

Ampro A1441 PTFE Seal Tape 1/2-Inch X 260-Inch

• Adds extra seal at threaded joints

Purchased this product and used it to install a shower head. It has been in my shower for more than a month now without any leaks or problems: I also recommend this product.

Buy Ampro A1441 PTFE Seal Tape 1/2-Inch X 260-Inch Now

I used this tape to install a shutoff valve. The tape does the job. Not really much else to say.

Read Best Reviews of Ampro A1441 PTFE Seal Tape 1/2-Inch X 260-Inch Here

This seal tape was perfect for sealing faucet and shower head threads.It comes with a little protective case (white shown in picture), and the tape works totally as advertised. I had no problems with it at all.

Want Ampro A1441 PTFE Seal Tape 1/2-Inch X 260-Inch Discount?

Just what I ordered....What more to say about plumbers tape?, works just as advertised....Works just fine....Works just fine....I would use this seller again...

This product worked and I will most certainly buy this again. I recommend this product to anyone. I use it to make Tiki torches out of empty wine bottles. Ampro Seal Tape, does exactly what it needs to!

Milton Snubber Air Hose - 30in.L., 3/8in. I.D. x 1/4in. NPT Swivel, Model# S-680-2

• Sold Individually

First, what's pictured is the 1/4" version. The 3/8" version I received is of course thicker, but uses a black hose instead of red. Hose is marked Made in USA. While the flex/swivel doesn't move as far as some cheaper snubber hoses, the orifice inside the flex joint is much larger. This should result in less restriction of airflow. I got it because the manufacturer of my air couplings recommends a snubber hose like this between the coupling and any impact tool. A side benefit is the added flexibility.

Save 26% Off

Leviton N1302-DS 30 Amp, 600 Volt, Toggle In Type 1 Enclosure Double-Pole AC Motor Starter, Suitable

• Thick Walled PBT Housing and Interlocking Face Encapsulates and Protects Internal Mechanism in Extreme and Harsh Industrial Environments
• Insulating Barriers Provide Terminal Isolation Between Phases
• Impact-Resistant PBT Face and Base
• Large Toggle is Easy to Turn ON/OFF with Gloved Hand
• 10 Year Limited Warranty

This is a no frills very well made switch suitable for motor control when you don't need an internal fuse to protect the motor from overload, or when there is overload protection on the motor itself. I used it on a 2 hp motor on my 8" jointer. Probably not as safe if there are inquisitive children around as the push button contactor with lockout type switches that ship with new jointers. The toggle and contacts are large and robust, so it should hold up well.

Save 19% Off

Maxus EX8008 15/7.5 Amp 2 Horsepower 26 Gallon Oiled Vertical Compressor with Dual Voltage 120/240-V

• Provides up to 5000 hours of pump life
• Vertical tank significantly reduces the floor space required for storage
• Provides greater air storage

I received my compressor damaged.The fan belt cover was broken from shipping.Amazon refunded me enough to purchase the broken shroud.The compressor works great.It is quiet and runs all my air tools.I would recommend this compressor to anyone to use in his or her garage

Buy Maxus EX8008 15/7.5 Amp 2 Horsepower 26 Gallon Oiled Vertical Compressor with Dual Voltage 120/240-V Now

I recieved a completely broken item, and recieved no customer service, until finally they told me I couldn't get a refund. Please stay away from this store, and tell anyone you know to stay away as well.

Campbell Hausfeld HL5402 4-Gallon Oil-Lubricated Air Compressor

• Oil lubricated CAST IRON cylinder compressor pump for long lasting and reliable performance
• The 1-1/3 running HP motor combined with the Campbell Hausfeld pump stands for high quality performance and starting capabilities
• 4-Gallon twin stack tank for efficient air storage

Great for home use, small projects, airbrush painting, and HPLV gun use. Bought two "oilless" compressors in two years, sent one back for repair under warrantee, waited a month for return. They leak air, they are noisy, air needs lots of water and contaminant filtering, and can't keep up with the job/use. This compressor uses an "old fashioned" piston air pump, and works right. Add an auxiliary air tank to keep up with nail and staple guns, and presto, you have a dependable workhorse. Can't compare with the 60 gallon, double piston at work, but this one is fine for small projects. Absolutely worth money/use.

Buy Campbell Hausfeld HL5402 4-Gallon Oil-Lubricated Air Compressor Now

I've not heard any complaints so it must be working I have one similar one and it has worked great for years.

Read Best Reviews of Campbell Hausfeld HL5402 4-Gallon Oil-Lubricated Air Compressor Here

Does exactly what is asked of it. used for operating pneumatic nailers

only runs for 10-15 seconds to refill tank when switch cuts on pump

only "would like a bit better" is the rubber feet contstruction a bit light.

somewhat bent from shipping abuse. Note that air intake is plastic and

will not survive any abuse. only thing i added is quick disconnect for air

hose. always found CH stuff well made have been using the brand for

air handlers and compressors for decads

Want Campbell Hausfeld HL5402 4-Gallon Oil-Lubricated Air Compressor Discount?

I've had this compressor for 4-5 years and works like a champ. We use it all summer long shingling houses. This thing will keep up all day with two coil nail guns. Had to replace the plastic air cleaner with a metal one. But that is just because this thing gets used pretty hard and we broke the plastic one when it was in the truck going to a job site. other then that would buy another one when this one goes bad

Air Engine Cleaning Blow Gun 24" Wand

• Excellent for cleaning and drying in hard-to-reach areas
• 1/4"npt female fitting
• Rubber tip protects from scratching or sparking
• Tip won't mar delicate molds or fresh paint
• Soft vinyl trigger shield

Very cheap. the threads at the bottom strip easily, and like the other reviewer said, the rubber tip flew off and was immediately lost. The thumb trigger itself is flimsy and I have to bend it back all the time. The handle is sized for a child's hand. The long wand itself is extremely cheap aluminum, it feels like an old TV antenna. This is threaded and screws into the handle, but the metal is extremely soft and the threads were easily destroyed. Not something I want 120 PSI bottled up in. The button under the trigger has to be lubricated for easy use. This thing is hissing all over the place, I'm trying to find a replacement now. It would be great IF the quality was a little better. But it's not. The whole assembly is a few months old, and is now totally encased in duct tape.

Buy Air Engine Cleaning Blow Gun 24" Wand Now

Low quality, rubber tip blew off the first time I used it and got lost.

Read Best Reviews of Air Engine Cleaning Blow Gun 24" Wand Here

Received as specified, as expected, quicker than expected, and priced right. Item was unavailable locally including an automotive store, Walmart, a hardware store and others. Worth the online purchase.

Want Air Engine Cleaning Blow Gun 24" Wand Discount?

Bought this wand for my detailing business, it has helped me get in tight spaces that a regular tool couldn't...very very helpful

Item is exactly what I wanted even though cheaply made. If I could have purchased the wand alone, I would have attached it to my own blow gun. The reason for 3 stars is the finagling in shipping and being charged prior to actually being shipped. I sent an e-mail inquiring as much but never received a return e-mail. Doing a USPS inquiry the day after my e-mail I was able to confirm that the item was received that day. I think AMAZON should check on these sellers to ensure that items have indeed been shipped prior to AMAZON making payment with your funds.