IIT 10410 Hose Ends 3/8 Inch - 2 Piece

• Repairs damaged or bulk hoses
• Corrosion resistant brass
• 1/4" NPT end connects to tools, fittings, couplers or plugs

I thought I was going to have to buy a new air hose. These work great. I didn't want to be bitten by a hose clamp when I use my air hose, so I didn't install one like they recommend. I shoved the fitting in the hose. It was a very tight fit, and with the barbs on it, it's not coming off. Great price, great fit, fast shipping. I highly recommend these.

Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor

• High efficiency 1.6-to-2-horsepower induction motor provides long life
• The High output, no-maintenance oil-free pump delivers 3.4CFM @40psi and 2.7cfm @ 90psi--the large 6-gallon tank reduces run time
• Lightweight compact pancake design for easy portability
• Includes quick coupler
• Weighs 52-pounds and includes a 1-year warranty

I bought it in November of 2002 I didn't use it till about 4 months later. Than I found the regulator wasn't working so I called Stanley and they said to send it to one of their repair shops in my state. It sat there for 1 month waiting for the part to come in. they fixed it (no charge) I have it back now and it's working fine. It came with a 2 1/2 inch nail gun. that works great also. I also use a 3-½ inch porter cable framing nailer with it and i've had no problem driving those nails in. the tank fills up very quick and last a long time between refills.

Buy Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor Now

I would recommend this compressor to any one.It does not pull very many amps so it can be used on a low amp breaker and a long extension card .I am a serviceman and have been using a craftsman dual tank compressor for many years. The bostitch compares to the craftsman.Have read reviews that people has said the bostitch is loud.All compressors that put out any volume of air will make noise and each compressor has there on tone of noise.I can not hear that this compressor is any louder than others. It just has its on tone.You can not go wrong with this compressor for medium use.

Read Best Reviews of Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor Here

I recently purchased 3 compressors form amazon the first was a Hitachi double hotdog which came broken and after parts (free from Hitachi) and my time still is leaking (disappointing) Second was this bostitch which I got as a package with the 3 guns and to be honest I only wanted the guns so this compressor was to be sold. Well because the Hitachi was down I used this and it does everything I wanted, quick, lite and not to loud. I'm not in a rush to fix the Hitachi now. By the way the third compressor is the little Senco. I will give a review on that after I use it this week.

Want Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor Discount?

Purchased this compressor w/Brad Nailer as a gift for my son. He used it once, then moved to an apartment, storing the unit with me. I went to used it and it would not bring up any pressure. Afraid I broke it so looked up a factory repair center. I brought it in and they told me "they did not want to mess with it". I said what? and the explained that this was so bad he had ten that customers have just told him to keep it. Also the factory rep came by and he could not even fix it. He went on to say he replaces the valves in them for $47 in parts +$40 in labor , the customers leave and return them next week broken with the same problem. Bottom line the nailer is great, but buy a Craftsman compressor and save yourself the headaches.

Save 42% Off

I have worked with this compressor for about a week and before that I was using a 30 gallon 220Volt rig that I have had for years.So,it is light and compact,irratingly noisy when filling but very portable.I like the convenience and the oil-less feature because I do a lot of trim work,like after new homes are sheetrocked,I will hang cabinets,interior doors as well as stairskirts,base,door casing and misc other trim details to complete the home.

New Air Pneumatic ANGLE DIE GRINDER - Air Tool Tools

• Air Die Grinder
• angle grinder

Now this is why I don't look too deep into the reviews. The only other review for this item and seller is negative and only 1 star.. What gives? I'd have to say for the price I paid for this it's none other than a steal. The item arrived at my local post office about the same time I would have assumed it would be and my first experience with it was very acceptable. I figured it would be slow and weak but it is the exact opposite. All my coworkers fail to believe that I indeed only paid less than twenty dollars for it. So 4 outta 5 stars for you sir.

Buy New Air Pneumatic ANGLE DIE GRINDER - Air Tool Tools Now

I bought this tool knowing it would be cheap and hoping it would last for a month or so to finish a project I'm working on polishing small bronze statues. What I received was a non-functional tool in a package that had already been broken open. The rivit holding the handle of the tool on had been drilled at an angle making it not hit the trigger. What kind of seller puts a useless tool in a broken package into a box and ships it to a customer?

Read Best Reviews of New Air Pneumatic ANGLE DIE GRINDER - Air Tool Tools Here

The first time I tried to use this product I plugged it up to the air and it immediately started rotating, it started rotating so fast it slung the blade off, something with the trigger mechanism is messed up and it is brand new. I do not advise for anyone to buy this product.

Neiko Heavy Duty 1.3 mm HVLP Air Spray Gun with Gauge

• Pro-grade air spray gun with color-coded 1.3mm nozzle
• Comes with a heavy duty durable 600 cc aluminum paint canister
• Built-in easy-read pressure gauge with regulator
• Operating pressure at 40 PSI, working pressure at 10 PSI
• 1.3 mm nozzle, aimed for urethane and color, hi-viscosity

I was in the market for a new spray gun with a 1.3 mm tip. I had a gift card for Amazon and was searching their site for paint guns. I stumbled across this one, took a chance, and I'm glad I did. I had never heard of Neiko Tools before, but this gun looked nice in the picture, so I ordered it. I was looking for a gun for under $100. The problem with most budget guns is that they all seem to be made by the same cheap Chinese factory. This one is different. The construction seems top notch, the feel is nice, and it really lays down the paint nice. I bought this strictly for clear coat. I've only used it a few times but I'm very pleased. It is also more efficient with the paint than my other hvlp guns. I put the amount that I normally would have used in my old gun into this one. When my project was done I had quite a bit left. The only gripe that I have, and it's small, is the weight. It's a little heavier than all my other guns. I could see where someones arm might get tired if they were painting something big. All in all, for the price, It's a great paint gun.

Buy Neiko Heavy Duty 1.3 mm HVLP Air Spray Gun with Gauge Now

I basically bought this for spraying primer coats, but it shoots a well patterned spray that I'm sure would work for the finest of base/clear coats. Actually going to order another for backup!

Read Best Reviews of Neiko Heavy Duty 1.3 mm HVLP Air Spray Gun with Gauge Here

It does not say who made it but the material is all sub-quality MIM or pot metal. Looks nice & breaks easily. Get a different one if you can.

Want Neiko Heavy Duty 1.3 mm HVLP Air Spray Gun with Gauge Discount?

I bought this based on the reviews here. First off, this gun is NOT hvlp. It took many more pounds PSI to spray than what what is stated, both in the description and in the instructions. For that amount of pressure, you are much better off with a traditional siphon sprayer. The tip is too small to spray primer, and would not spray a three part acrylic enamel, without major orange peel. A major disappointment. I returned mine.

Save 63% Off

I purchased the Neiko 1.3 mm HVLP as a stand in while I replace parts on my regular gun. The gun was not a disappointment. It performed better than I expected, I used it for both base and clear coat applications and it laid down both very well. My only complaints would be the low quality (cheap) gauge and plastic top.

LG Electronics LP1311BXR 13,000 BTU Portable Air Conditioner with Remote Control - Black/Metallic Si

This unit is much more quiet than a Whytner I had that leaked all over. It is also cools much better and does not leak. I would give this product a 5 star rating but for the window vent kit. First, it will extend to about 49 inches but there are 4 sections that you must use. This makes the panel very flimsy. Three sections are more than adequate. That was the only good part about the Whytner in comparison. Second, either the vent tube should have been made with a diameter 1/2 inch less or the vent kit panel should have been made 1/2 inch wider. When you attach the hose to the panel you have to move the panel away from the inside of the window for it to fit because the tube does not clear the inside of the window frame. Use a lot of duct tape. I hope this made sense.

Used less than one year and it worked great last summer,then carefully rolled into a spare bedroom for winter storage. BUT just like other reviewer, set it up for this summer and no cool air at all! Called LG and a week later repairman came out to tell me it has internal leak and not repairable! Lucky for me, my warantee had two more weeks. LG service contacted me within a day and will give refund after I return unit to them. They do not have one in stock to send replacement. Service good but product is junk.

Buy LG Electronics LP1311BXR 13,000 BTU Portable Air Conditioner with Remote Control - Black/Metallic Si Now

do not buy this. i had mine for less then a year. i used it for 1 summer and it worked great and next summer the compressor is shot.it dont blow cold air and makes so much noise that you would think there is a truck running in the room. and as for the lg repair service that is junk too. the repair man said it was fine meanwhile it was blowing warm air and leaking all over the floor and sounds like a truck. now the warranty is out and out on the curb it is going

Read Best Reviews of LG Electronics LP1311BXR 13,000 BTU Portable Air Conditioner with Remote Control - Black/Metallic Si Here

LG may may decent products, but heaven forbid you should need to get service. I have a relatively new (still under warranty) room A/C which has stopped cooling. After almost an hour on the phone with a tech who could barely speak English, he referred me to the (only) service center in the area, which is closed for the next 10 days (6/28 to 7/8). So beware that the service network for LG is paper thin compared to most established appliance man'f in the US, and should you need service be prepared to be without your product for weeks. Really great if you need an A/C fixed in the summer.

Want LG Electronics LP1311BXR 13,000 BTU Portable Air Conditioner with Remote Control - Black/Metallic Si Discount?

I received this last year (2011), purchased from Home Depot and used it for a full month and half until a part broke down and the unit stopped blowing cool air. LG honored the warranty as the replacement part was backordered and they sent me a new unit. Since the process took so long, I received the new unit in the winter, hence no real use.

Summer of 2012, begin using the new replacement unit. Works great for one month. Then the same issue...cooling part breaks and is on back order. LG granted me a warranty extension, but now the replacement part is still on back order after 1.5 months and LG wants me to wait for the part or have the third-party company verify they contacted LG for the part. LG will not do this themselves (they are the ones that recommended the third-party company to fix unit) and I'm playing phone tag. Third-party company servicing the unit says they received the incorrect part and needs to wait another 3-4 weeks. LG says to find out with the third-party company the order number and let them know the details and they will determine what to do from there. An here, it looks like I won't have it back for use again until this fall.

This is NOT reliable. Both the original unit and replacement unit had the same main cooling component fail after 1-2 months of use. Now i'm without a room AC unit and out $500.

DO NOT BUY.

UPDATE: I'd like to give this ZERO stars, but it's not avail. I tried posting this same review on the LG website and it got rejected. Surprise surprise. No wonder the reviews on the LG website have this product rated at 4/5 stars when here on Amazon it's 1-2 stars.

- Quincy Compressor Reciprocating Air Compressor - 5 HP, 230 Volt Single Phase, 80-Gallon Vertical T

• Industrial-duty US-made Baldor motor
• Capacitor start motor with built-in thermal overload
• Less than 5 PPM oil carry-over (blow-by) rating
• 145-175 working PSI
• Pump RPM: 942

From the time the compressor cycles on until the 80 gallon tank is once again fully charged, about one minute passes; at this rate it is going to take quite some time before replacing the break-in oil at the 100 hour mark. The compressor runs at a fairly low RPM and is thus moderately quiet and does not have that annoying sound most cheap compressors produce; in fact, it's kind of a nice rumble. Vibration is minimal, really minimal. Compressors of this type are not rated for a 100% duty cycle i.e. they are not designed to run continuously with no cycling on & off; however, we used it stripping paint at 150 psi for the better part of a day with a large external fan aiding the cooling and only tripped the motor reset once but it did have a few times to catch up while we moved ladders. This is a workhorse of a compressor. Because it is very heavy I mounted it on an industrial equipment dolly which allows for somewhat mobile use around the shop; as mobile as 700 pounds can be. The scfm rating is very high for a 5hp compressor; I don't think there are too many 5hp compressors that can match or exceed it. Champion compressors are another quality American line but I prefer the heavy build quality of the Quincy line of compressors. BTW, Quincy builds another 5hp compressor that is rated at 200psi continuous duty and 500psi intermittent duty but it is very costly and grossly overkill for most commercial/light industrial applications. Mine came with a single belt although the pulleys have another v-groove for twin belt drive from the HD Baldor motor. The compressor was manufactured in Quincy Illinois and has a 50,000 hour service life according to the manual. I installed resettable and non-resettable hour meters to insure maintenance intervals are met but at 58 years of age I'll probably never see the day it finally wears out. I purchased this product before I began buying tools and equipment through Amazon and had to pay an additional amount to have it moved from the store to my shop; therefore, I wouldn't hesitate to order it online and have motor freight deliver it. No set up is required other than hooking up the power cord; it even comes with break-in oil. Remember, buy quality and cry once; you'll get over the price soon enough and be better off for it.

1/4" Pneumatic Air Angle Die Grinder Right Angle Air Grinding Cut Off Wheel Tool

• 1/4" Pneumatic Air Angle Die Grinder- Cut Off Wheel Tool
• Air pressure: 90 psi Side to center (M/M): 34
• Free speed; 20,000 rpm
• Air inlet size: Standard 1/4" NPT
• Capacity 1/4"

I use hand tools like this grinder at work everyday so I really put them through alot of use so far this grinder has not let me down.I am so glad Amazon had these.and at a GREAT PRICE.I am so grateful for Amazon and there products I am a returning customer.THEY REALLY SHOULD BE A SECRET.

Buy 1/4" Pneumatic Air Angle Die Grinder Right Angle Air Grinding Cut Off Wheel Tool Now

At first look it looks cheap but it works really great I am using it to grind my truck to fix some dents and it is working great. I definitely recommend to anyone who is learning and needs low priced tools.

4-Rolls Teflon Tape Thread & Fitting Sealant 1/2" x 520" Roll

• The professional choice for fool-proof thread seals on water pipe, air hose and plumbing fixtures
• More effective, easier/faster/cleaner to apply than thread sealant or glue
• Simply wrap threads and apply fittings - no waiting for drying or curing
• Four rolls of easy-to-work-with 1/2" tape x 520 inches on each roll - over 170 feet of tape total
• This tape is so indispensable (plus it tends to 'disappear') we recommend ordering several sets

I got fed up with buying 100" or 260" rolls of teflon tape from the local suppliers at inflated prices.

I have a large piece of property with a lot of irrigation and use a lot of this tape, so a 100" roll of tape is a joke, and more of an irritation than anything else.

This is good tape, the roll will last a while, and the price is the best I have found.

Buy 4-Rolls Teflon Tape Thread & Fitting Sealant 1/2" x 520" Roll Now

What can I say? It's teflon tape and it works. It's kind of hard to screw up teflon tape though. Great price, so five stars.

Read Best Reviews of 4-Rolls Teflon Tape Thread & Fitting Sealant 1/2" x 520" Roll Here

I purchased this to use while installing a new showerhead and for bicycle maintenance purposes. The product is a great deal for the length of tape you get and it works flawlessly. Will buy again!

Want 4-Rolls Teflon Tape Thread & Fitting Sealant 1/2" x 520" Roll Discount?

What household doesn't need a bit of this stuff from time to time. At the price, I went ahead and bought the four pack, probably as much as I'll ever need the rest of my life.

I needed this to do some finishing touches on garden hose connections around the house. Not much to say here about teflon tape itself, as it is what it is. I chose this based on reviews on the amount and price via Amazon. The product came on time in its original thin cardboard box (a little beat from travel/shipment but survived) with no faulty craftmanship/poor quality noted and the tape appears as advertised in the photos. For the price and amount you get it is a great deal. Would highly recommend.

Mini 250 psi Air Compressor

• Essential safety and maintenance tool; improve gas mileage & extend tire life with proper pressurec
• Also inflates sports equipment, bike tires, water toys & rafts; adapter-tips included
• Compact, lightweight but effective--produces 250 pounds-per-square-inch air pressure
• Built-in easy-to-read pressure gauge; 3' rubber hose with valve-stem coupler
• Super-easy to use - just plug into car lighter outlet with extra-long 9' power cord

If all you want is a compressor to top off your car tires or to fill balls such as; vollyballs, basketballs etc., then it's okay. Any projects requiring lengthy run times will leave you disappointed.

Buy Mini 250 psi Air Compressor Now

This thing doesn't works for car tires. It won't go over 30 psi. When it reaches 30 psi it stops and burns with smoke. Don't buy it for car tires!

Read Best Reviews of Mini 250 psi Air Compressor Here

Product is fine if you want to use as tire pump for a couple of bikes. However, it does not seem to be able to do much more than that. The pump runs very hot after only 10 minutes

Want Mini 250 psi Air Compressor Discount?

It is small so easy to store in trunk. Gets very hot in about 5-6 minutes. When it reaches 30 psi it stops and burns with smoke. Get it @ Harbor Frieght for about $7. In a pinch it is fail-OK. Just ordered 2 from Amazon, 1st one lasted about a year.

Save 50% Off

WHAT A POS! Came with a broken/inoperable pressure gauge. AND HAS NO ON/OFF SWITCH! A REAL POS! Only rated a 1 since there is no option for ZERO!