M-D Building Products 8308 Air Conditioner Side Panel Kit, Gray

• All season protection against drafts, moisture, dust and insects
• Self adhesive installation strips included
• Open cell polyurethane foam
• Fasteners included
• 9 inches by 18 inches by 7/8-inch thick

When the accordian side panels to my five year old window unit finally bit the dust...I figured it was time to replace them with something besides a bunch of old towels and some cardboard.

These window panels are easy to trim...and will fit in the existing extenders if your air conditioner has them. If you don't...you can use the supplied sticky channel. My husband and I had them installed in 15 minutes...and noticed quite a difference in the coolness of the room....and they're a lot better looking than towels and cardboard.

Since they're foam...and compress...if your window is as uneven as mine is...it actually works better than the original plastic side panels. If you think industrial grey is ugly...you can cut some paper or cardboard to fit in front of the foam in the channel.

I recommend locking your window sash when using these...both to avoid having your air conditioner fall out your window...and discourage someone from using your air conditioner unit as a handy way to get in your house. (They don't screw in like the accordian panels do.) You can buy a simple "L" bracket at the hardware store to secure the sash.

Buy M-D Building Products 8308 Air Conditioner Side Panel Kit, Gray Now

These side panels are pretty self-explanatory. Two pieces of dense grey foam. Cut them to size, and voila! No more losing that precious cool air to the evil outdoors.

Read Best Reviews of M-D Building Products 8308 Air Conditioner Side Panel Kit, Gray Here

I use this panels over my existing panels, which came with the AC, for extra insulation.

The panels are easy to trim/cut and easy to put in place. I didn't even use the self adhesive installation strips, I just squeezed it between window frame and AC and it holds perfectly (goes back to its former shape after you squeezed it).

Does the job: Keeps HEAT out and COOL AIR in.

Want M-D Building Products 8308 Air Conditioner Side Panel Kit, Gray Discount?

I don't understand how these are supposed to replace existing plastic accordian side panels. The foam has no protective covering. Won't the elements (particularly rain and snow) ruin them? I didn't want to risk it. I used these to cover the existing panels, securing them on all sides with duct tape (otherwise, the air still leaks around). Not the prettiest solution but it works. I immediately noticed a big difference from the added insulation.

Save 11% Off

Very easy to cut and fit into window. Previous types required exact measurements before they could be sent to you and then you had to hope you measured right. Not so with these. Work really well at sealing the opening.

Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black

• 1/2-Inch NPT
• 0-140 PSI Pressure Range; Relieving with gauge
• Manual drain and 1.9-Ounce polycarbonate bowl
• Relieving
• 172 CFM

A decent reg for the money but the input/output block is machined aluminium or similar soft metal and easily stripped out. I would buy a more heavy duty reg if i had it do do over again. Also the packaging is a joke! Very "made in china" feeling for a US branded company like IR

Buy Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black Now

Having gone throught many different brands over the years (from cheap to ultra expensive) I decided to buy ingersoll Rand due to the great luck I have had with their air tools and compressors. This is the one to buy.

Read Best Reviews of Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black Here

the only reason I give 4 stars is I feel the AL is a little soft when threading steel pipe into it I was a little scared, but it survived and has lasted a year in my NOT HEATED OR COOLED shop in IA, and regulated the air almost perfectly, I have a second gauge so I can check to makes sure this is working right.

Want Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black Discount?

A high quality line regulator with integral 5 micron (replaceable/cleanable) filter element and water (condensate) collecting bowl. Typical IR/ARO industrial quality with a manual condensate drain. The unit came with no instructions but none are needed anyway. I only give it 4 stars because the shipping time was horrible. The Unit is 5 stars....It took 11 days from the time I ordered it to arrive from Lexington, Kentucky, about 300 miles. I could have walked there and back in less time. I'm using this in front of an IR refrigerated air dryer to supply my CNC plasma table.

Recommended. Super Saver Shipping isn't......

Save 18% Off

I bought a series of these regulators and moisture traps, in less than a year, two of the inline filters bleeder valves went bad and one regulator came apart inside the housing and could not be fixed. these where not mistreated items they where kept out of the sun under cover, placed a long distance off the compressor to keep them cool, and the lines where bled at the end of every day. I paid extra for these items wich should have been a premium grade setup and have been very disappointed in there life span. When I contacted Ingersoll Rand they refused any replacement or reimbursement for every item that went bad and would not honor the warranty that came with the regulator or moisture traps.

- Ingersoll Rand Air Compressor Start-Up Kit - Model# 97338099

Kit was recomended for my model.Got this kit and the air filters werent for my model.Also I found the oil locally for $6.00 a Quart.You do the math.

The added warranty extension is worth the money....that's what you're mostly paying for, and you've got extra oil and filters to boot.

Buy - Ingersoll Rand Air Compressor Start-Up Kit - Model# 97338099 Now

Not what I expected. Start up kit I recieved was for a different model compressor. This was not useful tom. I returned it.

Read Best Reviews of - Ingersoll Rand Air Compressor Start-Up Kit - Model# 97338099 Here

This start up kit was supposed to be for the compressor I bought at the same time(SS5), but it is for another Model. At the time, Northern Tool was the seller. Currently, Amazon is the seller but, the products are still shown mismatched. Just double check that you get the right kit for your model of compressor.

For 2 quarts of oil and 2 filters this is way over priced, however, you would only buy this kit with a new compressor, and that adds 2years to the warranty. So you are really buying oil, filters, and an extended warranty for this price.

If you just need oil and filters, don't buy this kit.

Want - Ingersoll Rand Air Compressor Start-Up Kit - Model# 97338099 Discount?

This start-up kit was supposedly shipped with the compressor ordered at the same time. The start-up kit was never received. I used the Amazon site "Contact Seller" messaging 5 times over a two week period trying to get someone at Northern Tool to simply acknowledge my problem, but to no avail! Amazon wouldn't help with the problem until the delivery window quoted by Northern Tool had passed (although it was clear the item had been lost, as all records showed it to have been shipped concurrent with the compressor).

Finally, a month after delivery of the compressor (sans start-up kit) my claim with Amazon resulted in a credit for the kit. Not my typical experience with Amazon or their sellers. So if Northern Tool is fulfilling your order, I hope it goes smoothly. If it doesn't you're likely hanging out to dry for a month until Amazon steps in.

Save 37% Off

Performance Tool W10058 3 Pc Air Tank Accessory Kit

I found the gauge size was the only fault.the 1/8 inch .on my air tank i have 1 / 4 inch port size instead of the 1/8 i prefer the 1/4 gauge size porting.i think the port size and gauge size should be listed on the discription of the unit