BADBOY Blasters BB200D (125 LBS MEDIA CAPACITY) TORNADO SERIES SODA/ABRASIVE PRESSURE POT BLASTER

• DEAD MAN GUN FOR SAFE OPERATION W/4 NOZZLES
• BLASTING HOOD
• SOLID RUBBER WHEELS
• BUILT IN WATER TRAP
• 16 FT BLASTING HOSE

The blaster works great. A few practices that need to be followed with any blaster are clean dry media and dry air. The water trap included seems to work fine. A strainer or screen to make sure all the media is able to pass through the nozzle. I like the top that allows easy filling.

Cons: Only real complaints are the hard to understand assembly instructions, the hood which tends to fog up easily and the required O-ring in the nozzle which can be lost or misplaced when clearing a clog from the nozzle.

Midwest Can (MWC2300) 2 Gallon Auto Shutoff Gasoline Can

• 2 Gallon 6 OZ
• Red, Plastic Gas Can
• Extra Capacity For Mixing Oil
• Spill Proof Spout Automatically Shuts Off When Tank Is Full
• Bottom Hand Hold For Easier Pouring
• Meets CARB & EPA Requirements

This spout is awful, I used it exactly twice before it broke apart trying to get it unstuck from my Subaru. I was lucky the tank wasn't full otherwise I wouldn't have been able to stop the flow of gas.

Buy Midwest Can (MWC2300) 2 Gallon Auto Shutoff Gasoline Can Now

The spout construction is terrible. It is impossible to pour without spilling. The mechanism is clunky, and the o-ring at the spout does not seal well. The hard plastic spout makes transportation and storage hard, and I am ever afraid of braking it. The cap is also useless. It is made of hard plastic with no seal. Its hook connects to the spout at location which obstructs the pouring. I tried to find the can with the flexible tube that slides inside it and is pulled out when pouring, but nobody sells those locally. I could only find this terrible type. This piece of crap is hard to use and outright dangerous. Good intention implemented in a very wrong way. I am sure it was created in order to satisfy some legislation, and I am writing this review in hope that the design gets reviewed and a replacement is implemented.

Read Best Reviews of Midwest Can (MWC2300) 2 Gallon Auto Shutoff Gasoline Can Here

This little container is just the perfect size for carrying and pouring petrol for the generator for our Travel Trailer. I don't know why others say it leaks, maybe I accidently did something right and lucked out for a change. Haven't the foggest what that might be though, all I did was follow the directions. Anyway, it's light, fits in strange storage places is easy to pour and handle.

1 gal is too small, 4 & 5 gals is too heavy for me. This one would be Goldilocks dream petrol container.

Want Midwest Can (MWC2300) 2 Gallon Auto Shutoff Gasoline Can Discount?

The only reason I am not giving one star is that I assume some machinery will push the spring loaded spout back correctly. However, when putting in my generator, it does not. I am left trying to pour and also pull back on the spout. I am trying to keep it in the mouth while pulling back -unless you have amazing skill you are going to spill -fire hazard. AVOID unless you are sure the usage you have will automatically push it back.

Save 64% Off

This gas can is good for the price but I don't care for the spout. I changed it to my old flexible spout that fits this can. It's much easier to use. I guess the way the spout works is alright but I prefer the much simpler flexible spout. Had to cut an air vent which I plug with a rubber stopper.

Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black

• 1/2-Inch NPT
• 0-140 PSI Pressure Range; Relieving with gauge
• Manual drain and 1.9-Ounce polycarbonate bowl
• Relieving
• 172 CFM

A decent reg for the money but the input/output block is machined aluminium or similar soft metal and easily stripped out. I would buy a more heavy duty reg if i had it do do over again. Also the packaging is a joke! Very "made in china" feeling for a US branded company like IR

Buy Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black Now

Having gone throught many different brands over the years (from cheap to ultra expensive) I decided to buy ingersoll Rand due to the great luck I have had with their air tools and compressors. This is the one to buy.

Read Best Reviews of Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black Here

the only reason I give 4 stars is I feel the AL is a little soft when threading steel pipe into it I was a little scared, but it survived and has lasted a year in my NOT HEATED OR COOLED shop in IA, and regulated the air almost perfectly, I have a second gauge so I can check to makes sure this is working right.

Want Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black Discount?

A high quality line regulator with integral 5 micron (replaceable/cleanable) filter element and water (condensate) collecting bowl. Typical IR/ARO industrial quality with a manual condensate drain. The unit came with no instructions but none are needed anyway. I only give it 4 stars because the shipping time was horrible. The Unit is 5 stars....It took 11 days from the time I ordered it to arrive from Lexington, Kentucky, about 300 miles. I could have walked there and back in less time. I'm using this in front of an IR refrigerated air dryer to supply my CNC plasma table.

Recommended. Super Saver Shipping isn't......

Save 18% Off

I bought a series of these regulators and moisture traps, in less than a year, two of the inline filters bleeder valves went bad and one regulator came apart inside the housing and could not be fixed. these where not mistreated items they where kept out of the sun under cover, placed a long distance off the compressor to keep them cool, and the lines where bled at the end of every day. I paid extra for these items wich should have been a premium grade setup and have been very disappointed in there life span. When I contacted Ingersoll Rand they refused any replacement or reimbursement for every item that went bad and would not honor the warranty that came with the regulator or moisture traps.

Stanley Bostitch CAP1516 Trim Air 8 Amp 1-1/2-Horsepower 1.6-Gallon Oil-Free CAmper-Shaped Compresso

• Highly efficient, ultra-quiet 1.5 HP compressor runs on only 8 amps
• Compact, lightweight design for tight work spaces and easy storage
• Oil-free pump requires no maintenance; includes internal 1.6-gallon reserve air tank
• Requires 2.7 cfm at 40 psi and 1.8 cfm at 90 psi
• 1-year warranty; weighs 19.5 pounds

I purchased this compressor because a small, light-weight unit appealed to me. Rather than lugging around my 50lb Emglo for smaller jobs, the thought of having a small unit made sense to me. The unit arrived intact and I immediately put it to use on a small 300 sq ft flooring job. It ran my BOSTITCH Flooring Cleat nailer at 80 psi with no problems. It is suprisingly quiet, light and easy to carry. Needless to say it worked fine with my finish nailer as well. While it will not replace my primary compressor, it's going to be nice on those jobs where high volume psi is not required. Out of curiosity, I'll probably try it out on my framing gun to see how it performs.

Buy Stanley Bostitch CAP1516 Trim Air 8 Amp 1-1/2-Horsepower 1.6-Gallon Oil-Free CAmper-Shaped Compresso Now

I recently received my Bostitch Trim Air compressor. Deerso was the Amazon vendor. UPS delivered it in just 3 days. There was no damage to either the factory packaging, nor the compressor.

I'm a self employed remodel carpenter. I needed to replace my recently deceased, 8 year old Porter Cable 4 gallon pancake compressor. My new compressor would have to meet 4 criteria:

* Light weight. I already own a 65 pound, cast iron, oil cooled behemoth. Though it's great for spraying drywall texture and production wall framing, I'm getting too old to lug it around when I only need to nail up some kitchen cabinet crown moldings.

* Powerful enough to also run my framing nailer. Most featherweight compressors are only designed to be used with brad nailers.

* Reliable. A poorly made tool that breaks when you need it is useless, no matter how little it costs. This is going be my every day compressor.

* Noise level. This is more of a factor for my clients than me, since I wear hearing protection almost constantly while on the job. At 75 db, the Bostitch was one of the quietest in its class.

After researching all of the lightweight models available, the Bostitch Trim Air proved to have the highest CFM @ 90 psi in the 20-30 pound weight class. I've owned and used several Stanley/Bostitch pneumatic tools before, and never had a problem with any of them.

Upon removing it from its packaging, I'll admit, I was a bit disappointed. Although the photos of it looked rather cool; unlike any compressor I'd ever seen before (kinda like a cartop carrier, racing bicycle helmet, or maybe an 'AlienWare' computer?), the fit and finish seemed rather cheap, almost toy-like. From top to bottom, this thing looks fragile. The weak, spring loaded ON/OFF push button, the wiggly regulator/pressure gauge/hose fitting assembly, the flimsy powercord wrap tabs, all look vulnerable. And the first time I drained the moisture from the tank, the petcock fitting refused to close completely, until I was forced to over-tighten it with a pair of pliers.

However, the CAP1516 does perform as advertised. At just under 20 lbs. , hauling it in and out of the truck is a pleasure. It is surprisingly quiet, compared to any other compressor I've owned; about as loud as a quiet home vacuum cleaner. It rapidly fills its 1.6 gallon tank with 125 psi, though there is no gauge to indicate anything other than outflow (regulator adjusted) air pressure. And I am able to sink five 3" framing nails into old doug fir framing lumber with it, before it needs to refill the tank. You won't be able to nail off a subfloor like a machine gun, or frame a house with it, but it will capably handle a roomful of baseboard, or slam in a few wall studs.

All in all, the Bostitch Trim Air compressor did meet most of my requirements. I'd have to say the "contractor" label Stanley has given it might be a bit of a stretch. This unit seems more likely to excel as a homeowner compressor. If you're not too hard on your tools, it will probably prove durable enough.

At around $150, IT IS WHAT IT IS...

UPDATE 1/22/13: It's still alive and kicking after four years of fairly steady professional carpentry duty. The cord wrap tabs broke within six months, the tank drain still needs to be opened and shut with pliers, the regulator assembly has rattled itself crooked and lost a tiny screw that attached the gauge dial face, which has shifted about 1/4 turn from where it used to be, rendering it uselss. So now I just hope it's still providing the same 100 psi.

The unit has payed for itself many times over during the past four years, not only because it keeps on quietly pumpin', but because my back has received a bit less strain due to its low weight.

It remains a solid three star product, although I might look to HarborFreight for my next lightweight compressor when this one eventually croaks.

Read Best Reviews of Stanley Bostitch CAP1516 Trim Air 8 Amp 1-1/2-Horsepower 1.6-Gallon Oil-Free CAmper-Shaped Compresso Here

This unit is extremely quiet. Runs a trim nailer with NO PROBLEM. I have a Husky, Porter Cable that I use in my business until now. They will be in the employee vans and this one in MY van. (Get the picture)

Want Stanley Bostitch CAP1516 Trim Air 8 Amp 1-1/2-Horsepower 1.6-Gallon Oil-Free CAmper-Shaped Compresso Discount?

This is a great compressor, it has pently of power to drive brads and finish nails.

This is a great compresser for nail guns, you can take it any where and it quiet!!! Wish I had it years ago!!!

Porter-Cable CMB15 150 PSI 1.5 Gallon Oil-Free Fully Shrouded Compressor

• 2.0 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
• 1.5 gal tank in shroud is easy to carry, includes water drain valve and rubber feet
• 150 psi max tank pressure stores more air in the tank for longer tool runtimes
• Durable oil-free pump for long life and no maintenance
• Low Amp 120V motor starts easily in cold weather or with extension cord

a plumber for 35 years i am always looking for the perfect tool to replace what used to be the perfect tool in my truck. this thing is beyond fabulous. lightweight and well balanced when you grab and go it is also well protected by its case. it is as light and compact as all the truck compressors i've used but didn't have the tank to build up pressure for the air gun for blowing out lines. adjustable pressure delivery dial and a cord wrap that actually works. rubber feet let it stay put while in use instead of "walking around."

Buy Porter-Cable CMB15 150 PSI 1.5 Gallon Oil-Free Fully Shrouded Compressor Now

Good value for the price. The air hose is chintzy, but easily replaced, when necessary, with standard 1/4" NPT hose from any major hardware store. The air flow rate is far greater than tankless air compressors, so this is a much better choice for automotive, truck, bus or RV tires. It would be over-kill for smaller tires. I didn't think it was too noisy, unless you have it very close to your ears when operating. There is an easy cure: get more hose. I don't think pulling on the ring of the relief valve to bleed off tank pressure is a good idea. It is noisy and will wear out the valve prematurely. It is also hard on your finger. Install a trigger-operated inflator instead and bleed off at the hose end instead of at the relief valve. I have only used it a few times, but am very pleased with performance so far. Durability remains to be seen. Bear in mind that the manufacturer recommends tank replacement in 10 years, regardless of how often it has been used during that time. It should last much longer if used infrequently and if the tank is ALWAYS drained after each use.

Read Best Reviews of Porter-Cable CMB15 150 PSI 1.5 Gallon Oil-Free Fully Shrouded Compressor Here

I ordered this product for my husband. He is absolutely pleased with its performance and portability. Would recommend getting this brand if you are thinking of purchasing. As far as we are concerned,it is a great buy, made very sturdy, and by far better than other brands that we have looked at or purchased in the past.

Want Porter-Cable CMB15 150 PSI 1.5 Gallon Oil-Free Fully Shrouded Compressor Discount?

I received the compressor as an early X-Mas gift less than a month ago. My expectation was that the compressor would serve me well as a portable unit ideal for occasional home-use, primarily for adding air to car and bike tires, and pumping up basketballs, soccer balls, etc. While the hose and accessories included with the unit seemed very cheap, I was hoping the compressor itself was not cheaply constructed. However, on the 4th time using the compressor (to add air to a car tire), the unit failed. In particular, there's a massive internal air leak (inside the case) that renders the unit unusable. The compressor runs and the tank builds pressure to 150psi, but when the regulator dial is turned clockwise to provide working pressure, there's a massive leak inside the case and pressure is immediately lost, most likely behind either the regulator itself or perhaps at the connection to the pressure gauge. In any case, I've repeatedly checked the safety valve on the side and relief valve on the bottom, which are both fine. And the leak is not coming from the hose or the hose connection, but is definitely inside the case. I'm very disappointed with the poor quality control that let this defective unit reach the customer. It may be simply be a loose internal connection, o-ring, etc., but I'm left with nothing more than an industrial paper weight in my garage, which I'll not likely return since it was bought as a gift (off Amazon.com), and because I tossed out the original box the week after I received it, making it a hassle to ship back.

Save 48% Off

For the uses I bought it for this is a great little unit. I will use it to inflate bike tires, trailer tires, car tires, winterize my travel trailer and clean bike parts with a pistol gun. It is compact and light enough to take along on a road trip. The coiled hose has had some complaints but for my purposes it is fine. I do not intend to run any tools with it, but it probably would handle a small job. I looked at several other compressors and even brought one home that I was not happy with. After a lot of research this one is perfect and fairly priced. I did buy a few quick connect fittings that make changing from one use to another much faster.

Maxus EX8403 21 Amp 5 HP 80-Gallon Cast Iron Oiled Two-Stage Vertical Compressor

• 21 Amp 5 HP 80-gallon cast iron oiled 2-stage vertical compressor provides up to 10,000 hours of pump life
• Ideal for automotive and job site tasks
• 2-stage 2-cylinder, and oil-lubricated cast iron pump for long life and durability
• Offers oil sight gauge, high airflow, and 175 maximum PSI
• 5-year limited manufacturer's warranty

I have owned this compressor for about two weeks so far so I can only comment on setup and limited use, as well as voltage requirements that prospective owners should know about before purchasing any air compressor.

I installed it at my place of business and quickly realized that the motor is wired for 230 volts, but my service supplies 208 volts. I emailed Campbell Hausfeld and they replied within a week,telling me that the motor requires a minimum of 215 volts to operate. I then called Emerson where the compressor motor is made and they told me that they do not recommend running the motor on 208 volts, and that the motor is not capable of being rewired for 230 volts.

Further research led me to hire a electrician to install a "buck and boost transformer" to raise my voltage from 208 volts to 230 volts. This was the solution I chose, rather than return the compressor and buy one that ran at 208 volts, because my research showed that the compressor would run more efficiently at 230 volts than at 208 volts. After all, if I couldn't achieve the maximum cfm that the compressor is capable of then why bother with a 2 stage compressor in the first place? The transformer cost $ 138.00 and the electrician another $ 180.00 for his expertise.

When the installation was complete we threw the switch and the compressor ran perfectly with a moderate amount of noise and hardly any vibration (I bolted it to the concrete floor with neoprene pads under the feet). So far I have only used it for about two hours on one project, but from what I can see it works perfectly. It builds pressure up to 175 psi as listed, then sits idle until the pressure drops down to 125 psi. I have another project coming up within the next two months and will follow up this review at that time.

UPDATE: I have now owned this compressor for about 18 months and I am happy to report that it has worked perfectly. The only con that I can see is that there is a very slight dripping of compressor oil that seems to be coming from the drain plug and dripping down the side of the air tank over time. I see this as an extremely minor issue because the level of compressor oil is still where I started when looking at the glass "bubble" on the side of the unit. I have not had to add any compressor oil to the unit. In hindsight, I should have removed the oil drain plug and wrapped it in teflon tape before filling the unit with compressor oil. I would definitely recommend this compressor.

Buy Maxus EX8403 21 Amp 5 HP 80-Gallon Cast Iron Oiled Two-Stage Vertical Compressor Now

I should say that the unit did have a bad pressure switch on arrival but CH got that rectified quickly. Since, the initial problem there haven't been any and it has worked as expected. I have it in my hobby shop and it easily keeps with anything and everything I do. I have heavy air consumption tools and it has no problem keeping up, it could handle 2-3 times what I do and still keep up LOL.

This unit makes single stage, 60 gallon compressors sold at the BORG look and perform like toys. ;-)

Read Best Reviews of Maxus EX8403 21 Amp 5 HP 80-Gallon Cast Iron Oiled Two-Stage Vertical Compressor Here

Love the Compressors section advertisements.

First this compressor is manufactured in Singapore. Should you need parts or anything else for the compressor head in the future this may be a concern.

Advertised as a seven and a half, 7.5, Horsepower compressor. I was planning on replacing my 5HP compressor until I found the amp rating on the motor was the same as my 5HP compressor. Physics says you can't get more power from the unit than you take from the wall. This is a 5HP motor. I don't care what the placard says. Amazing this type of advertisement is even allowed. Poor consumer that doesn't know a thing about electricity. He is at the marketers mercy.