Porter-Cable C2025 150 PSI 2.5 Gal Oil-Free Hotdog Compressor

• Durable oil-free pump for long life and no maintenance
• Low Amp 120-volt motor starts easily in cold weather or with extension cord
• 2.5 gal Hotdog style tank is easy to carry, includes water drain valve and rubber feet
• 150 psi max tank pressure stores more air in the tank for longer tool runtimes
• 2.6 SCFM at90 psi allows for quick compressor recovery time, per ISO1217 Only 24 lbs for easy portability

I love this little hot dog!!! its the perfect size to be able to fit on the shelf in my van and not take up valuable space on the floor like my twin tank did. Its 150 psi!!! this thing is perfect for all finish guns but has enough guts for a framing nailer or fence/siding nailer as well. Now, I wouldn't use this all day framing a house but for the smaller jobs where you want to break out the big gun for a bit, its perfect. One of the biggest pluses is that because its a 150 psi, the cut in switch kicks the motor back on when the tank gets down to about 110 psi or so. So when you're using a framing gun or siding nailer, you won't get that last couple of weak shots before it kicks back on again. It fills up nice and quick too. I like this one much better than the pancakes. The last small "finish compressor" I had was this wierd little bostich one and it was cool because it was really light and really quiet but it would get down to about 70-80psi before it kicked on again and that sucked when using my siding gun... and forget about using a framing gun with that.

I plan on rigging up some straps to this so I can carry it on my shoulder like a tool bag.

cheers

Buy Porter-Cable C2025 150 PSI 2.5 Gal Oil-Free Hotdog Compressor Now

This compressor has lots of capacity, but still small enough to carry easily. Good quality & good price.

Read Best Reviews of Porter-Cable C2025 150 PSI 2.5 Gal Oil-Free Hotdog Compressor Here

This product is great. Its leaking out where it hooks into the tank but i think i can take it apart and fix it.Im still giving it 5 stars.

Want Porter-Cable C2025 150 PSI 2.5 Gal Oil-Free Hotdog Compressor Discount?

Selected this compressor because wt. & shape made it the lightest by over 25% of others in same capacity range. (24 lbs., the most I wanted to hump up and down stairs.) Product reviews were generally good, although there were a fair amount of lemons being sold or an equal amount of incompetent users. It also maintains a higher psi than others in the range, giving me greater flexibility with my Hitachi nailer. Not terribly noisome, as I understand the flat tank models are. And Rockwell Porter Cable have done well for me over many years.

Save 44% Off

Small and lightweight, but up to 135psi. I like the hotdog style better than pancake because it takes up less space on the workbench.

Campbell Hausfeld 2 gallon air compressor kit

• 2-Gallon Inflation and Fastening Air Compressor with Nailer and Accessory Kit
• Includes bonus 2-in-1 Nailer/Stapler Kit
• Easy-to-carry, user friendly twinstack tank design
• One year limited warranty - From Manufacturer

This is a nice little set with nice features and it's sharp looking. However, this little guy has terrible tank refill (recovery) time. I was so shocked at how slow it is that after several re-fills, I decided to use a stopwatch on it. After evacuating all air from the tank, I turned on the compressor and started my stopwatch. It took exactly 4 mins and 15 secs to fill the tank to 110 psi. That's ridiculous in my opinion! I will be calling Campbell Hausfeld to verify if this is normal. Other than that, the kit is a nice one to have around the house.

Automatic Inline Air Tool Oiler - Extend Tool Life

• Improve performance & extend life of expensive air tools by keeping properly lubricated
• Automatically feeds small quantity of oil directly into air line, lubricates tool as you use it
• Galvanized steel with tough one-piece polycarbonate reservoir; see-thru so you know when to refill
• Installation takes just seconds, 1/4" NPT-threaded male & female input/output
• Easy-fill hole with brass screw, rubber gasket; capacity 1.5 fl oz

Blew out the o rings under pressure. Don't buy not worth even trying to set it back. You get what you pay for on this product

Buy Automatic Inline Air Tool Oiler - Extend Tool Life Now

Unlike another reviewer, I had no problems with air leaks. It handles 100 psi with no leaks. It may handle more, but I did not feel the need to test it at higher pressures then I normally use with my nailers. For nailers that normally do not get used in tight spaces, you can attach it pertinently. For my brad and finishing nailer, as well as my staplers, I put air fittings on one, and put it between the air line and the tool. That way, I can easily remove it if it is in the way. This also lets you use the same oiler on more then one tool.

About the only thing I would like to see is a psi rating on the oiler itself, or at least on the packaging.

Read Best Reviews of Automatic Inline Air Tool Oiler - Extend Tool Life Here

Not sure what the pressure rating is on this thing, but it leaks terribly at 90 psi. The acrylic / brass combination just doesn't hold. I tried to tighten up the acrylic part, but the threads slip and it just keeps turning. I'm going for an all-metal inline oiler now. Valley brand 1/4" Airline Oiler. Item No: AIROIL-001.

M-D Building Products 8308 Air Conditioner Side Panel Kit, Gray

• All season protection against drafts, moisture, dust and insects
• Self adhesive installation strips included
• Open cell polyurethane foam
• Fasteners included
• 9 inches by 18 inches by 7/8-inch thick

When the accordian side panels to my five year old window unit finally bit the dust...I figured it was time to replace them with something besides a bunch of old towels and some cardboard.

These window panels are easy to trim...and will fit in the existing extenders if your air conditioner has them. If you don't...you can use the supplied sticky channel. My husband and I had them installed in 15 minutes...and noticed quite a difference in the coolness of the room....and they're a lot better looking than towels and cardboard.

Since they're foam...and compress...if your window is as uneven as mine is...it actually works better than the original plastic side panels. If you think industrial grey is ugly...you can cut some paper or cardboard to fit in front of the foam in the channel.

I recommend locking your window sash when using these...both to avoid having your air conditioner fall out your window...and discourage someone from using your air conditioner unit as a handy way to get in your house. (They don't screw in like the accordian panels do.) You can buy a simple "L" bracket at the hardware store to secure the sash.

Buy M-D Building Products 8308 Air Conditioner Side Panel Kit, Gray Now

These side panels are pretty self-explanatory. Two pieces of dense grey foam. Cut them to size, and voila! No more losing that precious cool air to the evil outdoors.

Read Best Reviews of M-D Building Products 8308 Air Conditioner Side Panel Kit, Gray Here

I use this panels over my existing panels, which came with the AC, for extra insulation.

The panels are easy to trim/cut and easy to put in place. I didn't even use the self adhesive installation strips, I just squeezed it between window frame and AC and it holds perfectly (goes back to its former shape after you squeezed it).

Does the job: Keeps HEAT out and COOL AIR in.

Want M-D Building Products 8308 Air Conditioner Side Panel Kit, Gray Discount?

I don't understand how these are supposed to replace existing plastic accordian side panels. The foam has no protective covering. Won't the elements (particularly rain and snow) ruin them? I didn't want to risk it. I used these to cover the existing panels, securing them on all sides with duct tape (otherwise, the air still leaks around). Not the prettiest solution but it works. I immediately noticed a big difference from the added insulation.

Save 11% Off

Very easy to cut and fit into window. Previous types required exact measurements before they could be sent to you and then you had to hope you measured right. Not so with these. Work really well at sealing the opening.

Factory-Reconditioned Stanley Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit

• CAP2000P-OF 2.0 HP (peak) oil-free compressor
• SB-1850BN 2-inch 18GA brad nailer
• 1/4-inch by 25-foot PVC air hose with fittings
• Brad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in length
• Compressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gauges

Unlike the other reviewers, the unit I received was clearly used (but, not abused). I have shopped for a compressor to use around the house on small projects, and especially for maintaining the air pressure on my car tires. So, when I saw this unit I knew the price was right, and took a chance on it being "Factory-Reconditioned." Glad I did. For the price, it is hard to beat this compressor. ** One caution, the picture of the unit gives one the impression that there is a black rubber 50 foot hose included. Mine arrived with a 25 foot coiled yellow PVC hose. So, just be aware, because you'll need to purchase a better hose if you want to use it for any robust work. ** Otherwise, I'm pleased with the purchase, and even recommended it to a friend.

Buy Factory-Reconditioned Stanley Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit Now

This is my first factory reconditioned power tool, but if what I've experienced so far is any indication, it will not be my last. First off the compressor and nailer arrived within the 5 days promised. I've seen some reviews of not being properly packed for shipment. While mine was not packed with bubble wrap or foam peanuts, the box was the proper size and shape to protect it during shipping. The compressor included hose, inflator, fittings, teflon tape and instructions. The nailer arrived in the plastic carry case with oil, box of brads and instruction manual. Basically everything you need to get started.

Appearance: The compressor was in great shape, it was obvious that it was not brand new with a few scratches on the tank paint and a few scuffs here and there. I'm sure the hose and accessories were brand new because they were still in factory wrapping. Some have said that their compressor included a good quality rubber hose, mine sadly did not. I got the 25' PVC hose as listed in the description. It is stiff, and does not coil really well, but will work for me until I need a new one. The nailer appeared to be brand new until I took a close look and spotted a few small scratches on the front.

Quick Test: I decided that I would turn it on and let it run with the tank drain valve open as a breaking in period for around 30 minutes while I assembled the air chuck, uncoiled the hose and installed the QD fittings. It was raining at the time so the compressor was in my garage with the door open. It is pretty loud as many have already stated, I would say it is about as loud as my circular saw, maybe just a little more. I was expecting it to be much louder from all the complaints, but it is as loud as you would expect a compressor of this size to be. If I had to work right next to it for any period I'd want to wear some ear protection. Once I closed the valve and adjusted the regulator to max, it ran for around 3 minutes then cut off. I didn't hear any leaks so I hooked up a blower nozzle I have and held the trigger wide open. After only 7 seconds the compressor kicked back on. I stopped blowing and let it build pressure. After 1 minute it cut off again. So far so good. Next I decided to top off all the car/truck tires. While adding 3-5 psi to each of 8 tires, the compressor had to run twice. I kept airing the tires while the compressor was running and it seemed to keep up. Next I tried out the nailer. I just wanted to make sure it worked so I shot around a dozen 2" brads into stacked pieces of MDF, then pine 2 by 4 and some plywood I had lying around. It drove and countersunk all the nails without any problems.

Projects and use: My first projects using the combo were out of 3/4 plywood. I think I shot around 30 2" brads and another 40 1.25" brads and never missed a beat. If I hold the nailer correctly, the brad is shot and countersunk well into the stock. I didn't need to mess with the depth set adjustment. I shot between 15 and 20 brads before the compressor had to build up pressure again. I've also used the compressor several times for blowing sawdust off power tools and general cleaning (moving dust).

Conclusion: So far I am satisfied with this combo, especially for the great price I got it for plus free shipping. I can't attest to how long it will last of course, but like I said so far so good. The condition of the tools upon arrival was excellent and they seem to be well-built sturdy tools, not cheap or lightweight at all. The original reason I wanted a compressor was just for blowing dust in the shop and airing up tires. The compressor has to run more often than I thought it would have for blowing dust, but if I lower the pressure I can find a happy medium. I guess that is a trade off for having a pancake compressor. I like that I can carry it where I need it and it takes up about the same space as a 5 gallon bucket. The nailer sure is a handy tool that I think I will use a lot if it lasts. I like the fact that the nailer will drive as small as 5/8" or large as 2" brad. Marked down for short power cord and questionable longevity.

Read Best Reviews of Factory-Reconditioned Stanley Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit Here

This is a very good value, mine arrived in great shape and looked new. However, the release valve does seem to be a weak point in the design as it is plastic and was broken upon arrival. A pair of vice grips solved the problem. Overall a great value. The compressor seems to be high quality and the gun as well. I used it for a small project and both the gun and compressor performed as expected. If it wasn't for the breaking of the release valve, this would have easily gotten 5 stars.

Want Factory-Reconditioned Stanley Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit Discount?

I wanted a light compressor for small jobs and bought this combination becaue of the exellent value. I didn't need the brad nailer but gave it a try. It is far better than my old Porter Cable so I now use the Bostich. The compressor works well but it is noisier than my much larger compressor. I was using it indoors and had it sitting on a dropcloth on top of a carpet which should have muffled the sound a bit. Ear plugs are in order for even the most brief of use.

Save 51% Off

I was looking around at air compressors for a long time on Amazon. I came across this compressor after being dissappointed with how expensive the other new compressors were. I took a chance and ordered this one for nearly 50% off of a new one. I have been using this product for over 2 weeks fairly heavly.

I was extremely happy with my purchase. The product came and looked brand new. No scratches, dents or anything to lead me to believe it was pre-owned.

Pros:

Great value for price

Easy to operate

came with thread tape and 25ft heavy duty hose

brad nailer works awesome and includes brads

Fairly quiet compared to other air compressors.

No oil to mess with, just plug in and your good to go

Handle makes for easy carrying

Builds pressure quickly

Cons:

it looks like some others got a 50ft hose

-Power button is made of cheap plastic, I can see this breaking when pulling the knob to turn off.

You won't do better for the price! Such a deal and works awesome.

Porter-Cable C1010 Heavy-Duty 1-Gallon 135 PSI Max Quiet Trim Compressor

• 0.75 SCFM delivered at 90 PSI; one-gallon tank and 135 PSI max enable surge performance with quick recovery
• Durable, maintenance-free pump ensures ease of use and long product life
• Low 71 dBA for quiet operation; 2.6-amp draw for easy start up and reduced breaker tripping
• High-flow regulator provides maximum performance
• Light weight (23 pounds) and compact design (9 inches tall) for convenient storage and transport

I bought one of these to replace a Campbell-Hausfield compressor I've used for home projects over the past 20 years. My C-H was still viable, barely, but lacked some pretty basic elements that have made using it increasingly questionable (no pressure gauge, a crude output pressure regular which doubles as the tank drain, no automatic cut in/cut out). With another project coming up, I decided it was probably past time for a change and so began looking. I was very tempted by the very favorable reviews for the big brother of this one, the Porter-Cable C2002-WK, a pancake compressor that was just a bit too big for my needs, not to mention 10 pounds heavier and $60 more. The fact that Amazon had this one priced for $80 on Cyber Monday sealed the deal. It is very easy to use, although as many have noted, make sure you perform the 15 minute break-in by running it with the tank drain open before you pressure it up for the first time. The drain is a levered ball valve on the underside of the tank that is positioned so that when you lift the front of the unit to reach it, the valve opening will be on the tank's lowest point. The factory settings have the pump cut in when pressure is less than 120 psi and cut out when it reaches 135, which has worked flawlessly on my unit (there is a spring-loaded emergency pressure relief valve should the cut out fail for some reason). A knob allows you to set the output pressure level to match the pressure need of your device, although with a 1 gallon tank it can't be anything that requires a lot of air flow other than in bursts. A quick connect is pre-installed for common 1/4" NPT coupler plugs. For me the big attraction was the low profile for the 18" shelf in my garage and the low volume level (it's still a bit noisy, but well below ear plug levels; i.e., you can work along side it). I've set it up with a 30' air hose and tire inflator to have it always ready for that particular need. Otherwise, the compact form factor is well-suited for hauling it to where it's needed, and it is more than potent enough for my brad and staple guns, although a professional might prefer a unit with a bigger tank so as to drive more nails per minute.

Buy Porter-Cable C1010 Heavy-Duty 1-Gallon 135 PSI Max Quiet Trim Compressor Now

I just bought this compressor and sold my 6 gallon compressor. This unit is fairly quiet (acceptable), I have owned small compressors for 3 years now and mainly do trim work, and drywall texturing with these units. I bought this unit for installing a hard wood floor using a Bostitch pnuematic floor stapler and corner round around base. This worked great, it recharged up fairly quick and feels like it is built to last. I know how well Porter Cable tools and compressors hold up and think this is going to be a keeper. Smaller compressors do work a little harder because of the size of the tank, but they haven't let me down yet and I am impressed by how much better they get each year.

Read Best Reviews of Porter-Cable C1010 Heavy-Duty 1-Gallon 135 PSI Max Quiet Trim Compressor Here

I ordered one because I am tired of lugging my twin tank Porter Cable around when I want to do small jobs around the house. My twin tank weighs at least 60-70 pounds so it stays in the garage most of the time and I loathe moving it around. I'll normally roll a hose through the house to the job which is a big pain. Great compressor that I have owned for almost 10 years but it is just too big to move around and setup. Also too noisy for indoor use. Also cannot use any old extension cord with it which limits its flexibility.

So, hopefully this one will work for those small jobs. I considered those CO2 tanks with the regulator but that seemed a pain with the bottles and the cost was about the same as this little compressor.

Only question I have is who makes the darn thing? DeWalt's version looks identical but painted yellow. Same or similar specs. DeWalt's has EMGLO printed boldly on the front. Emglo is owned by Stanley Black & Decker.

EDIT: 2/4/2012

Well, I've used it and I like it. Very portable and easily runs trim guns. It does run a bit more when you are driving longer and bigger nails but still handled everything I have thrown at it. It is quiet but in a confined space, you still might want to wear some ear plugs. Only gripes I have are the power cord is too short (just like my twin tank Porter Cable) and the little power cord keeper wraparounds get it the way and snag the air hose.

EDIT: 2/19/2012

OK have used this extensively in my kitchen for some cabinet and trim work. Works fine except that darn hose regulator leaks just like several others have reported. Even when it doesn't leak, it is hard to dial the right pressure. It seems you have to fiddle with it to get it where you want it, then of course, you don't know if it will stay on that pressure. My twin tank Porter Cable regulator works flawlessly and has for almost 10 years now. I guess you get what you pay for but now I am considering returning this to Amazon for another one or maybe going with the Senco. I like everything about this PC unit, but can't live with a balky hose regulator. Knocked off 3 stars.

EDIT: 3/17/2103

I used this a lot last year with a room expansion. Fought the regulator constantly. Don't use it now going to take it and see if they can replace the regulator under warranty. If anyone knows an inexpensive fix, please post as a COMMENT. I like the size and weight the regulator is a POS and ruins the compressor.

Want Porter-Cable C1010 Heavy-Duty 1-Gallon 135 PSI Max Quiet Trim Compressor Discount?

I bought this compressor to keep in my 5th wheel to blow out the water lines. I was a bit nervous about buying such a small compressor, but I have tons of respect for Porter-Cable as I own many of their power tools. The size of the compressor is perfect! It easily fits in any of the lower compartments. Its light weight and its quiet too! I own a full size compressor that I use at home, but my concern was when we go camping in colder weather and I might have to drive home with water still in some of the lines before I get a chance to blow the water out at home. Now all I have to do is run a extension cord from the trailer to the compressor, while its still in the storage compartment, and run a air line from the compressor to the city water fitting. With the compressor in the storage compartment running, you can barely hear it! I set the line pressure to 25-30 psi and start opening up the faucets. With it only being a 1 gallon compressor, it takes a little time, but I can blow out all my lines in about 20 minutes. Its a perfect compressor for what I need it to do!

Save 56% Off

I'm always leary of claims like "quiet" when it comes to a compressor. This time, however, the claim was pretty accurate. Although not "whisper-quiet" it certainly is much quieter than any small compressor I've ever owned. I'm pleased with the overall performance and certainly a wonderful price as well.

Air Sand Blaster Gun

• Air inlet: 1/4inch, Cup capacity, 1.0L
• Working pressure max, 8BAR
• Nozzle: 6.5MM
• Air consumption at 100% int. 5.7CFM
• Air consumption at 20% int. 1.1CFM

KEY THINGS TO KNOW details below

Amount of pressure needed or size of compressor

Regular flow of sand

Angle you are pointing the gun

grade of sand

I never sandblasted before. I had a project that I thought was small and the reviews looked good on this gun, so I got it. I have given it 5 stars because it did what it said. I've written this review to help other novices as they consider getting a gun.

CONTEXT

First, to help you understand my review, I'll give you the context. I wanted to sandblast my rusty, old boat trailer. I figured it was a small job since it is not something body mechanics are interested in doing. However, I learned that it was not a small job. It took me hours to do and hundreds of pounds of sand. I'm glad I did it. I now can do other projects and know what I'm getting into.

THE FLOW

It took me sometime to get the flow of sand to the point that it took the rust and paint off at a reasonable speed. (To me a reasonable speed is about 1 square inch per 5 seconds. Not like at an auto shop, but good enough for my project.) My compressor is able to do 135 psi, but not continuously. I found at 120 psi I was able to get good results. However, because I was doing a trailer which required me to have the gun at different angles, the canister did not work well. I kept losing contact with the sand. I got a 2' hose (I think 3' would work too) and attached it to the end of the gun. I put the other end of the hose in a bucket of sand and was able to move the gun around to get the angles I needed and also have a nice flow of sand.

SAND RECYCLE

Someone said 5 pounds of sand goes a long way. I guess that is true on a small project, but not for a trailer. First I got fine sand, but that didn't work well. I picked up medium grade and that was much better. If I could have gotten even coarser I would have. The gun doesn't have a problem moving dry sand. After 70 pounds and only getting 1/8 the way done, I decided I would recycle the sand. I put a tarp down to catch the sand. I used an old window screen to clean it. It worked great and I didn't have to drive 50 miles to get more sand. I recycled it many times and it was still so clean I kept it for another job. I put it in a plastic bag in hopes to keep moisture out.

HOOD

I'm back on Amazon to get a sandblaster hood. I should have spent the $20 for the first project like someone suggested. I had tight goggles, a mask quality mask for breathing and ear plugs and still the sand got everywhere.

Well, I hope that helps. Enjoy yourself, it is a blast :-)

Buy Air Sand Blaster Gun Now

This sandblaster does exactly what I wanted it to do, I first bought one about 20 years ago from SnapOn for about $90, I thought it was sooo worth it after finding so many reasons to use it, and it couldn't have been easier to use either. so when I went looking to replace it a few weeks ago came across this one online and snatched it up for a fraction of the cost and it works about as good as the SnapOn one, can't get much easier than pour sand in canister and pull trigger.

Read Best Reviews of Air Sand Blaster Gun Here

Arrived nicely packed in a box however the factory package had been opened and taped up. Was it a return? who knows. There were no obvious signs of use.

Initially it didn't work and after a while I discovered some masking type tape stuck inside the sand pick up. Could of come from the bag of sand,who knows.

With that figured out it now works great, you will need a pretty good size compressor to use it.

Want Air Sand Blaster Gun Discount?

I was skeptical that I was going to get a working product for the price. I used aluminum oxide for my cutting medium & a 200 psi compressor to do my blasting. I had a small project, so the compressor, though small did put out enough pressure to operate this gun. I had to wait on the compressor several times. A bigger compressor other than the 8 gallon 200 psi would be highly recomended, espescially if you have a large project. Something more like a shop type continuous pressure compressor. The gun worked fine, now I must work on the compressor.

Unfortunately I tried this out after the return date. This never worked at all, would not pick up any blasting media, very little suction on the siphon tube. Also it leaked air from around the fitting at the grip. My quick connect fitting was not the issue, it leaked from around the grip itself. My air compressor is way more than sufficient to power this gun and I have an air dryer so the air supply is not the issue. Total waste of money.

Ingersoll-Rand IRT285B-6 Heavy Duty 1-Inch Pneumatic Impact Wrench with 6-Inch Extended Anvil

• Exceptional power, durability, and operator convenience
• 1,450 foot-pounds of maximum torque
• Speed: 5,000 rpm
• Inlet to prevent hose kicks
• Six-inch extended anvil

I have not used it yet. Well he hasn't. But it came in 2 days it was packaged great. It looks great. He has wanted one for 10 years, so is a very happy guy.

Buy Ingersoll-Rand IRT285B-6 Heavy Duty 1-Inch Pneumatic Impact Wrench with 6-Inch Extended Anvil Now

I purchased this for a fleet maintenance shop with a couple pf hundred units. It is one of the better if not the best impact I have usd in over 20 years in the business, and at a much better price than I found on some lesser impacts.Great and fast customer service.

Read Best Reviews of Ingersoll-Rand IRT285B-6 Heavy Duty 1-Inch Pneumatic Impact Wrench with 6-Inch Extended Anvil Here

The ship time was way shorter than stated. This is an awesome tool. Pricing was fabulous. Best deal I found after 2 days of call around and Web searching.

Want Ingersoll-Rand IRT285B-6 Heavy Duty 1-Inch Pneumatic Impact Wrench with 6-Inch Extended Anvil Discount?

the IR285A-6 was a good tool, the IR285B-6 is now made in China and the durability is poor.

Save 47% Off

Product exactly as my customer wanted, price was the lowest on the Net and shipment was prompt.

New Filter Silencer housing enclosure 1/2" w/ Replacement Paper element for air compressor

• New Filter Silencer w/ paper element included 1/2"
• 1/2" Connection 20 scfm flowrate
• FREE SHIPPING TO LOWER 48 STATES
• #14 element included
• plastic lid allows for less noise and rattling than metal lid units

I am new to compressors. I have a 12 gallon craftsman air compressor that we picked up at a garage sale. The previous muffler/air filter fit in the palm of your hand and allowed a lot of noise to escape out of the pump. This unit is much larger than the stock unit and removed a lot of the unwanted noise. The noise now has more bass rather than the previous extremely loud tinny noise.

The underside of the unit has 3 holes were the air enters, the holes have pipes that enter the inside of the unit. To lower the noise further, sound dampening material could be added inside the unit and plastic tubes could be extended on the outside of the unit as are seen on other smaller mufflers. The diameter of the included filter element is about half the outside diameter, this allows for space for the inside 3 air pipes.

I was concerned about the cover being plastic, but it turned out to not be an issue and I prefer it to the over priced metal ones I saw at the hardware store. The base and the screw in pipe are both metal.

Additionally, it's bigger than you think, with a size of about a saucer, so you need to think about the space available on your unit. Also, make sure you get the correct pipe screw-in size, there are a few web pages that helped me order the correct size/thread type. If you mess the this up, take the original and this unit to your hardware store, they should be able to help you with a conversion piece.

I highly recommend this unit if you want to cut down on unwanted noise.

Buy New Filter Silencer housing enclosure 1/2" w/ Replacement Paper element for air compressor Now

Quieted up my frankensteined compressor setup (various hand-me-downs, not pretty, but highly functional) a decent bit. Pretty large, so some black 1/2" pipe and some fittings were needed to move it a bit. May move a bit further away to quiet the entire machine down when it is permanently installed in my workshop.

Read Best Reviews of New Filter Silencer housing enclosure 1/2" w/ Replacement Paper element for air compressor Here

I did not no what to expect with this product , but was pleasantly surprised to find it's design and manufacture are well made.

Febreze AFFB1625 High Allergen Microparticle and Odor Reduction Air Furnace Filter, 4 Pack, 16-Inch

• Electrostatic, high allergen microparticle reduction with febreze fresh fragrance control
• Reduces odors and freshens the air with febreze fresh scent option
• 3 stage odor reduction technology
• Captures pollen pet dander dust mites dust lint mold spores microscopic allergens odors smoke smog and volatile organic compounds
• Provides a hint of freshness throughout your entire home

I have pretty bad allergies and these filters help with that problem. Also, it's hard to let your door's open to let the air circulate to help the musty smell so the 'Fabreze' helps with that problem.

Save 7% Off

Ingersoll-Rand 1200-TK1 Air Ratchet Motor Tune-Up Kit

• Air Ratchet Motor Tune-up Kit for use with 1200 and 1210

Amazon advertises the 1200-TK1 but twice they shipped me the 1200-TRK1 which is a ratchet head rebuild kit. I returned the first one and explained why I was returning it, and Amazon promptly sent me another wrong kit. I would expect they would check the part number the second time around. In the end, I returned the second kit and gave up. I will try and obtain the correct kit from someone else.

ATD Tools 9895 Air Tank - 5 Gallon

• An excellent reserve air source for cleaning and inflating
• 4 feet air hose with air chuck included
• Easy to read pressure gauge
• Heavy gauge steel construction with rust free baked finish
• Dimensions: 17.9 inches x 11.4 inches x 15.3 inches

purchased air tank because of the rhino brand name. When I got the item home the initial inspection revealed that it was cheaply made. The first time I used the tank after filling, I couldn't get any air to transfer from the tank to the vehicle tires I was trying to adjust. I then tried to determine why and discovered that the filler hose would not depress the valves on any of the tires. I ended up replacing the filler hose with the one from the air tank I was replacing; now it works fine. I would reccomend you buy a different tank.

Save 20% Off

Frigidaire FAC126P1A Compact II 12,000-BTU Room Air Conditioner with Electronic Controls

This air conditioner I purchased new for around $269.00. Its small width, (hence the name Compact II) fits in the small width double hung window that I needed it for (I believe my window is 24" width). Most standard sized window units will not. This is one of the reasons for buying it, along with its low price. This unit blows extremely cold and cools my living room and kitchen with ease even on the most brutal summer days in New York. I have no complaints about the ability of this unit to cool whatsoever. My only complaint is it is extremely noisy it sounds like a factory. It is even very noisy at its lowest fan setting. The manual says to lower the fan if it is too noisy, but that is an exercise in futility. So if you're gonna have to hear it, might as well leave it at maximum. I like the variable fan speed feature. So one would be hard pressed to find a 12,000 BTU for the price of this Frigidaire unit, but you WILL be stuck with the noise. Frigidaire should reverse engineer a Panasonic air conditioner if they want to be serious about competing in this market.

I gave it a generous three stars because of its impractical noise levels.

Scratch the first review. I spoke, or typed too soon. Do not buy this air conditioner. After returning the first one because it was damaged before shipping, the second one has broken as well. Used it for about 6 days in total. The compressor has stopped working completely, just makes a buzzing sound and emits a burning odor. I've had it for about 50 days in total so the return policy is useless. I'm extremely dissapointed with purchase and feel like I have wasted $300+. Tried contacting frigidaire but no luck so far. Unfortunately I can't edit the original rating. I'll update this review with specifics on how Amazon deals with the situation. Again, be extremely careful if you are considering purchasing this air conditioner.

05/22/08 Just want to update this review in terms of how Amazon handled the situation. After calling and Emailing customer service I received an Email from Amazon stating that "As it seems that the problem with this item is more widespread than we originally thought, we are not able to send another replacement. We will gladly refund you in full for the return of this item." It took a few Emails but Amazon refunded me in full for the air conditioner and shipping. I was impressed with how they quickly apologized and offered a full refund; very good customer service. The air conditioner gets 1 star, but Amazon gets 5. I have since purchased an LG 8000 BTU air conditioner. The fan isn't quite as strong, but it's much quieter and the air gets just as cool as the frigidaire. I've used it for about 15 days and the compressor is still working.

Buy Frigidaire FAC126P1A Compact II 12,000-BTU Room Air Conditioner with Electronic Controls Now

Easy as pie to install, works exactly as expected. Keeps a huge room nice and cool. Was delivered in 2 days, love Amazon Prime.

Read Best Reviews of Frigidaire FAC126P1A Compact II 12,000-BTU Room Air Conditioner with Electronic Controls Here

I bought three of these for my office. 2 years later, all of the compressors have stopped working. Even when they were working, the three units were loud and they did not cool very effectively. Based on my experience with these air conditioners, I will never buy Frigidaire again and I would recommend you avoid them.

Want Frigidaire FAC126P1A Compact II 12,000-BTU Room Air Conditioner with Electronic Controls Discount?

I spent 3 hours reading specs and reviews on window units. This had the highest energy rating (10) when I bought it 4 summers ago. It cool 540 sq ft. I live on the second floor and the central air couldn't maintain in the dead of summer. This unit saved my summers. A big plus is when fall is cooling down and spring is heating up, there are many weeks you can use this unit (with a fan blowing into your main living area) by itself and save on central cooling. I keep it in the master bedroom so I can turn off the central air at bedtime and sleep in a comfortable room. Its has been the most money save purchase I've made in years. Very important! It' footprint allows installation into a small window. Don't forget to measure.