Danby Premiere DPAC11010 Portable Air Conditioner

We bought this 11,000 BTU Danby August 2010 when our downstairs central a/c unit failed. We intended to use it as a temporary solution for a few days until our central air unit could be replaced, but we were astounded at how well it cooled so decided to hold off on spending the $4000-$7000 replacement cost.

While I'm writing this, it's 101 degrees outside in San Antonio TX, but inside our 648 sq ft open living room/kitchen area it's only 79! Current air temp being output by the Danby is 57 degrees. Last August we had temps of 105 and higher, and this unit was able to keep us cool downstairs, although the compressor was running almost continuously to keep up. And when the compressor does shut off, the fan continues to run and circulate the air there is no "auto fan" setting, so it doesn't shut off or turn on when the compressor does. Apparently this is common among many portable a/c units from what I've read.

One thing I've noticed on the temperature settings if we set the inside temp to be 78, the compressor will continue running for a long time even after the room temp cools to 76, perhaps stopping when the temp drops to 75. Likewise, the compressor will remain stopped even when room temp rises to 80, perhaps kicking back on when temp reaches 81. So there's a spread of at least 4 and perhaps 6 degrees between what you set the room temp ie. your actual room temp will vary from 2-3 degrees cooler to 2-3 degrees warmer than what you set.

This is a dual-hose ventilation system (some portable air conditionesr are one hose), and it was very easy to set up the included window kit only took about 30 minutes to get the unit unpacked and running. The window kit works with windows which open up and down, and with those which slide sideways.

It's a self-evaporating unit, so that most condensate from the cooling process evaporates instead of collecting in a reservoir and this appears to work as designed we've opened the bottom drain plug occasionally to check and never had any water drain out.

Comes with a 24 month warranty, but if you register it online and complete a short survey, you'll receive an additional two months!

Overall, we've been extremely pleased with the Danby, and it saved us from making a huge and immediate unplanned expenditure for A/C repairs. We're now able to take our time, shop for the best deal, and replace our central a/c unit at our convenience.

We used this all summer long in our large master bedroom. When we first got it I thought it would take a very long time to cool but it surprised me when we felt a noticeable change in temperature in under 20 minutes. An hour later the room was at the temperature we wanted and we were loving this unit. Then we realized that my husband installed it incorrectly and there was a small gap that was still letting in the hot heat from outside. When we filled the gap it got even cooler faster. Over time we had it nicely setup where we just switched it on and got the room cooled down fast. Does the job, we were happy all summer long...

Buy Danby Premiere DPAC11010 Portable Air Conditioner Now

EASY TO MOVE ABOUT THE HOUSE WITH THE CASTERS. ONLY TAKES MINUTES TO HOOK UP TO A DIFFERENT LOCATION. PUTS OUT PLENTY OF COLD AIR TO COOL A ROOM. I HAVE FOUND IT VERY DEPENDABLE WITH NO LEAKAGE. A MUST HAVE, IN THIS HEAT, IF YOUR CENTRAL UNIT GOES OUT. IF YOU WANT A PORTABLE AC WITH VERSATILITY AND DEPENDABILITY THEN THIS IS THE ONE I WOULD ADVISE IN PURCHASING.

Read Best Reviews of Danby Premiere DPAC11010 Portable Air Conditioner Here

The folks at Danby apparently never heard of Steve Jobs.

The user interface and usability is horrible and the

manual is even worse. Descriptions of many features are

missing from the manual.

I purchased this air conditioner to cool a small server

room at my school.

This air conditioner never turns off. When the room temperature

goes below the thermostat setting, the compressor turns off

but the fan keeps running. Depending on the fan speed you select,

this will consume 50, 60, or 90 watts all the time.

The next ridiculous feature is the Auto-timer. I expected this

to be a time of day timer but instead it is a on or off duration

timer. Default setting on power-up is 8 hours for on and for off.

This means that when the air conditioner turns on, it will stay

on for 8 hours regardless of how cold the room is. My server room

got down to 60 degrees due to this feature. The manual does not

say how to turn this off but tech support told me I could set the

timer to be 0 hours and then the autotimer mode would be unset.

If I lose power, I'm back to the ridiculous mode of 8 hours of

continuous on -no non-volatile memory in this device. Finally,

there is no way to review your settings. If I'm in timer mode, and

switch to another mode, my timer setting of zero automatically

gets reset to 8 hours. This means that I can't put this air

conditioner on an external programmable timer because, power

cycling will reset the auto-timer. And, of course, the temperature

setting would be reset.

The manual says nothing about how to connect up the intake air and

how it is split. Turns out that the intake air gets split to the

cool conditioned air and the hot exhaust port. This means that if

the exhaust goes outside the room but the intake remains inside the

room, the room will get depressurized. If the intake and exhaust

are connected to the outside, then the room will become pressurized.

This pressurization/depressurization could be a potential health

hazard if there is a combustion source in the room. This isn't really

a big deal but it should be discussed in the manual. I currently have

it connected with intake coming from the room and exhaust (hot air)

going out.

I'm not using the window kit but the intake and exhaust hose dimensions

are incompatible with any standard duct-work. It is very close to 5"

duct but is not quite compatible with anything I can get at my local

hardware store.

There is no way to program the range of temperatures (the hysteresis)

of the thermostat.

The manual refers to a standby mode but there is no light to indicate

that the unit is in standby. I just thought it was off until I called

customer support. This is important because that is how I program the

auto-off setting of the stupid auto-timer.

The air conditioner seems to work fine when in cooling mode. I've

had it for only 3 weeks so I can't say anything about the reliability

of the device.

Because of the usability and lack of non-volatile memory, I definitely

would not purchase this device again.

Want Danby Premiere DPAC11010 Portable Air Conditioner Discount?

Air Pressure Switch For Single-Stage and Dual-Stage Air Compressor - 1/4in. Male Fitting

I own and operate a body shop in this area, and recently my pressure switch failed on my main compressor. I found this switch and installed it and now my compressor is fine again!

This compressor regulator works perfect. It also has a head pressure release that functions perfect. It replaced my old regulator and now my compressor works like it should.

Buy Air Pressure Switch For Single-Stage and Dual-Stage Air Compressor - 1/4in. Male Fitting Now

Wagner Spray Tech 520000 Power Tex Texture Sprayer

• Power texture sprayer for walls and ceilings
• Applies popcorn, orange peel, and knockdown textures on walls and ceilings
• Powerful air turbine and 1-gallon adjustable hopper for fast coverage of large surfaces
• Includes 3 spray nozzles, 1-gallon adjustable hopper
• Weighs less than 5.7 pounds

It should be noted that I consider myself handy and have done several home projects and have had good results without knowing what I was doing and that I am normally physically capable.

After reading the previous reviews I was encouraged to purchase the sprayer. I played with the mixture's consistency and practiced spraying most of the morning and then tackled a small closet that included the ceiling.

It was messier than I expected with not just pieces hitting the floor but gobs oozing out of the nozzle and onto the trigger. (The instructions mention that some water may leak out of this area.) If you are an Amazon lady or trained with the military and are used to holding an AK-47 or lift weights on a daily basis you should be fine pulling and holding the trigger and holding up the sprayer to get the coverage you want. (I had to use two hands at times to keep the trigger fully pulled.) I only finished because it became personal after the first hour. I was trying to get the pattern that would match my existing texture so maybe I was expecting a little too much. (Professional texture man is scheduled to arrive in a few days.) I will still use the machine to texture the walls in the garage but I was not able to get the design I wanted for the house. I am good about reading and following directions so I do not think I could improve upon the performance except with maybe more target practice. I did find that clean-up was not bad at all.

NOTE-----Updating you on my 2 star review. The professional painter/texture man showed up and guess what he was using? Yep, the same Wagner machine! He has had it a long time and swears by it. He complimented me on my closet and said that he had to go through the same trial and error but the main tip he gave was very thin mud. I watched and it was very runny. The instructions state "like pancake batter" but his was VERY THIN. Can't stress that enough. Still was messy on application but not like when I used it and it will not work you as hard since you will not have the mixture so thick. So, based on everything he said and the fact that he no longer uses the bigger machines and his Wagner had tape all over it from obvious hard use, I am upgrading it to 4 stars and withholding the one star for when I attempt the garage. Hope this helps!

Buy Wagner Spray Tech 520000 Power Tex Texture Sprayer Now

My wife and I just purchased our first home and she really dislikes popcorn ceilings. So she insisted that we have it removed and put up a knockdown texture in it's place. Then after a few estimates, the cheapest we could get it done to our whole house was for a little under $3000 which was more that what we were willing to spend with all the other things that we needed to have done to the house. So I priced out all the materials needed and my estimate came in at about $900. Keep in mind that this price is also including the cost of the tools needed (ex. 1/2" drill, trowel, paint primer, sprayer, ect.) which I didn't own.

Anyway, after going to my local Home Depot, they wanted about $60 a day to rent a sprayer and since I wanted to take my time, this really wasn't an option. I know that Wagner states that this sprayer is really for touch up jobs and not exactly for doing a whole house but let me tell you, I did my whole house and it worked great. After practicing a bit in the rooms first, my results were identical to a professional job at 1/3 the price. I will tell you this, it is a lot of work and the hardest thing about it is removing the popcorn and preping the room. I know some people say to use a garden sprayer and then they sell this neat little scraper at Home Depot that you can attach a bag to so you don't make a mess but that scrapper is junk. If you want to move fast, tape up the walls and floor using plastic sheeting and use a garden hose with a 10 or 12 inch taping knife to remove the popcorn. You'll barely scratch the sheet rock underneath and you'll remove the popcorn in under 30 minutes per room. The whole process is truly a huge mess but the end result is a very nice looking textured wall. I decided to go with the medium nozzle (yellow) and I ended up with a very nice looking texture that isn't as bold and some of the houses I've seen.

So if you're in the same situation my wife and me were in and you're fairly competent with tools, you'll be able to do the same thing because I'm a complete novice when it comes to drywall textures and I ended up with a great looking house. I'll also be honest and tell you that the first room I did, didn't come out as nice as the last but not because I applied the texture incorrectly but because I knocked some of it down too soon. Make sure you wait at least 20 minutes before knocking it down and after you spray a wall, take a step back and if you see any bare placed, just go over it with a quick trigger pull and you'll be amazed at what you're left with.

Read Best Reviews of Wagner Spray Tech 520000 Power Tex Texture Sprayer Here

I am rehabing a home in Tampa, florida, and tried with mixed results to use the spray texture cans from Home Depot . six cans with six different poor results. I purchased this sprayer, shot an entire bathroom with AWSOME results. I LOVE IT. Buy one

Want Wagner Spray Tech 520000 Power Tex Texture Sprayer Discount?

I was a little sceptical about this product doing as it says, but after finishing my living room all doubts where erased. Now wait, it does have a learning curve, don't think taking it out of the box and start spraying away will yield great results. Not likely. If you pratice like others have said that helps greatly. I think the hardest part was getting the drywall mud to the right consistinsy. I did orange peel, believe when I say if you think it has enough water in it add a little more. When I took the mixing paddle out, the mud came right off, did not stick, runny, soupy like, allot thinner than pancake batter. Do a pratice spray on cardboard and check your results. Do a back and forth motion about 2 to three feet away and do not stay in one place to long. Go over again for heavier texture. Not too much on first passes though or it will not look too good. Let it dry then go over it again. Few other things is I did a large room 15 by 20 by 16 ft high. It makes it harder,but not impossible. If you do a large area everytime you refill take off the nozzle clean it and the opening on the gun. If not it will clog up and flow will stop or the mud in the hopper will bubble and blow up out of the hopper, not that dramatic but you will hear it bubbling and rumbling you will know, then you have to clean it. Only takes min or two. Cover your mixed mud while spraying or it will harden. Also I noticed it did firm up a bit in the bucket even though it was covered, so adding a little water would not hurt each time. Just depends on your mud. IT IS ALSO VERY VERY MESSY....Cover EVERYTHING, windows, floors, vents, dogs, cats...Really you will regret it if you don't. It not for pin point accuracy, comes out fowards but in a wide arc, shallow arc, whatever it feels like. You do have some control, dont get me wrong, but there is some leakage, and if you dont cover the floors they will be textured as well. Its fun, also the unit loaded with mud is heavy, and large projects can get tiring. Oh also I placed it on the ground to load it, hopper in the position to do walls, easy. Also something to keep in mind, I primed my walls and ceiling it made it difficult to see results and where I sprayed, I had to bring in utility lights, still was hard, I suggest using a tinted primer close to what you will eventualy paint the walls, if white oh well, but I know if you can, it will be easier to see what you doing and get faster results, thats the only headache I had white mud white walls blends in...ahhh.. Not Wagners fault though. I highly recommend it, just be prepared and be patient and I believe you will have fun too and yield great results...Everything is easy to clean too..Have Fun..

Save 7% Off

Im a professional drywall finisher of over 10 years, and think this thing is great. No more hauling in a heavy texture rig and dirty hose for patch jobs. For the do-it-yourselfer $100 it isn't much more than a regular hopper and gun that requires a compressor. Great price for a sweet sprayer.

Astro Pneumatic 2630 Universal Quick Coupler with Safety Lock and Air Regulation

• Designed to facilitate efficient safety locking, air flow regulation and pressure release
• Constructed from durable material
• Offers long lasting durability

This thing makes connecting and disconnecting air tools a breeze! I replaced a cheap connector that is typically found in those kits which had become very difficult to use when the line was pressurized. Connecting and disconnecting on the old connector required quite a bit of force, and popping the release to remove a tool resulted in a large burst of air which was not only rather loud, but pushed the tool or hose out with enough force that it could result in injury if you weren't careful.

This Astro coupler is a vast improvement. I installed it within about 60 seconds using a little thread tape. The blue adjustment ring is locked when there isn't a male coupler inserted, so it acts like an extra air lock. Then you push the tool in to the coupler and it allows the ring to be twisted allowing air to flow to the tool. The tools click into the coupler with very, very little force.

I'm not sure how useful the air adjustment (regulator) aspect will be, as I tend to control my air on the compressor thus in my case the adjustment is either on or off, but for some uses it might be helpful to have the adjustment right there at the tool. When you are done with the tool and you want to remove it, you simply rotate the adjustment ring to the locked position and it releases the air between the coupler and the tool. The amount of air released is minimal and it is very quiet. It isn't like a traditional coupler that releases a powerful blast of air. Then you simply pull the sleeve (the black part of the coupler) and the tool disconnects with minimal effort.

One nice feature is if you happen to like to leave something like a blow gun attached and if that tool happens to leak air a bit, you can simply rotate the collar to lock the airflow and it should prevent air leakage when you aren't using the tool. In my case my blow gun tends to bleed a bit of air, so in the past I always had to disconnect it. With this coupler I can just leave it installed and rotate the collar to shut off the airflow when I'm done for the day.

According to the instructions the couple accepts M style, ARO style, Hi Flow style, and T style connectors so it is essentially universal. I believe everything I have is M style (which seems to be the most common but don't quote me on that). I honestly have no negatives to report here because the coupler just works... and it is far superior to the regular couplers that have no pressure release option.

In short tools go in easy, tools release easy, it gives an additional layer of safety, and makes the entire process much easier. I suppose at almost $20 it is a little steep and it is true you could purchase several of the cheaper couplers for the same money, but I honestly feel this is a worthwhile upgrade.

Save 43% Off

New Heavy Duty Pressure Switch for Air Compressor 25 amp 95-125 Four Port Connection w/ unloader & o

• Brand New 25 Amp Heavy Duty pressure switch 95-125 - 4 port - unloader & on/off lever
• FREE SHIPPING
• 25 Amps at 110, 230 or 460 volt - single or three phase
• UL Approved
• Can be used with 1 - 25 amp motors without a magnetic starter

As I live in a rural area bugs got in the OEM Switch and locked it on. As such my compressor was running an awfully long time. I manually shut it off before any damage was done.

This pressure switch appears to be pretty well sealed so hopefully it wont get buggy and crap out.

Switch itself works fine. No complaints.

Buy New Heavy Duty Pressure Switch for Air Compressor 25 amp 95-125 Four Port Connection w/ unloader & o Now

Well bulit switch. The only complaint I have is the cover could have been a little larger to accomidate the wires.