Showing posts with label portable air compressor parts. Show all posts
Showing posts with label portable air compressor parts. Show all posts

Friday, July 11, 2014

SPT WA-1230E 12,000-BTU Portable Air Conditioner with Remote Control

SPT WA-1230E 12,000-BTU Portable Air Conditioner with Remote ControlI bought this AC unit during the excess heat wave this summer. The unit, (once properly vented) works really well for cooling my bed room but it shuts off when the water needs drained. Durning these hot temperatures this is after only 2-2.5 hrs. Draining the water is not an easy task because the drain is only 1 inch from the floor so you can only use a really really shallow dish. It does come with a hose to connect to a drain for continous drainage but the drain must be below or at the same level as the AC unit.

This drainage problem makes the unit NOT useful for long term cooling (you can't run it all night or use it to cool while at work)

As a long term solution I am working on buidling a stand to set the unit on for continous drainage into a bucket but it is heavey and vibration makes noise a problem. Other portable AC unit have a collecting bottle which is easy to revome for drainage.

I bought my Sunpentown in May of 2005. When it arrived the LED display was broken and the 12,000 BTU air conditioner was not capable of cooling my 150 square foot room. I called Sunpentown and explained the situation. They said that as long as the output temperature was 20% cooler than the input temperature the unit was considered to be functioning properly.

Do the math. If your room is 95 degrees, a 20% reduction means that the air coming out of the AC is still a sweltering 78 degrees! A 12,000 BTU air conditioner should turn my tiny room into a meat locker, even on the hottest days. The Sunpentown struggled to make the room comfortable anytime the temperature exceeded 80 degrees. Since the LCD was broken I decided to have them replace my unit hoping that I might get a better one. The second unit worked as poorly as the first, but at least the LCD was visible.

As others have noted, drainage is a constant issue with these units. Mine would only run for 3-4 hours before drainage was required so I wound up putting it on a stand and running a hose from the discharge area to a 5 gallon bucket. There is simply too much water produced for it to successfully blow out the exhaust hose. It should be noted that my unit only had 1.5 feet of exhaust hose with no bends so it was an ideal installation. If you have any bends in the hose it will only make matters worse.

In August 2006 the unit quit cooling the air. The compressor would kick on, but no cooling occurred. I called Sunpentown but since my unit was 3 months over the 1 year warranty they wouldn't do anything. My only option was to ship the unit to their facility at my cost, have them diagnose and repair the unit at "flat rate" (but they wouldn't discuss specific prices) and ship it back to me at my expense.

Not wanting to incur $175 in shipping charges PLUS the unspecified repair fees just to return my Sunpentown Portable Air Conditioner to its unacceptably poor level of functionality I sent my unit to a place it truly belongs THE LANDFILL.

If a normal window unit won't work for you, save yourself a lot of money/time/aggravation and buy a giant industrial size fan. Sunpentown builds lousy products and provides lousy service when those products fail.

Buy SPT WA-1230E 12,000-BTU Portable Air Conditioner with Remote Control Now

My experience with a Supentown Portable AC Unit is very similar to what 'Thorion (Rome, NY)' reported. I purchased a WA-1200E in June 2006 and it died last week (end of June 2007). This unit was lightly used (less than 10 hours per week during warm months only) . I contacted their support staff and, although they were prompt to reply, they indicated that the unit was out of warranty and that nothing was covered. They gave me the option of shipping the unit (85 lbs) at my own expense back to their warehouse in CA. They would then determine what part(s) failed and charge me for the replacement parts, labor and return shipping. Their other suggestion / advice was to take it to a local repair shop of my choice and have them find out the problem...then order the replacement parts from them. Either way....TERRIBLE! For a costly unit like this it should last way longer than 12 1/2 months. DO NOT BUY!!!

Read Best Reviews of SPT WA-1230E 12,000-BTU Portable Air Conditioner with Remote Control Here

I was shocked at how useless this thing was. I would turn this unit on immediately when I come home from work. The initial reading on the unit would say something like 95% (house was all closed up). The unit could not even drop the room temperature below 90%. After about 1hr the exhaust hose would radiate so much heat into the room that the unit made a better heater than air conditioner. The vents blow upwards as if to cool the ceiling. You cannot adjust them vertically. The unit is also very loud.

I returned the unit after giving it a try for about 3 weeks. The other pain is returning this. You have to put it back in the box it came in with all the paper work and then carry this 85 pound box to a fedex place to have it shipped back to the manufacturer. You have to pay shipping to send it back and you are not refunded that amount. Plus there is a 6% restocking fee.

Good riddance.

Want SPT WA-1230E 12,000-BTU Portable Air Conditioner with Remote Control Discount?

I bought this product in the summer of 07. I live in a room over the garage that gets the brunt of the sun and therefor reaches 78-80 degrees even with the AC on. At first the unit after running for a couple hours would drop the temp to 72 on a summer day but no lower. The first spring/summer I did not have to change the water at all. The next spring/summer it could only drop the temp down to 73-74 and I had to change the water 5-6 times. Now only less than 3 years later we are in the midst of our first 80 degree week. The unit is only dropping the temp to 75 and I've had to change the water twice in two days.

Please read everyone's review about how hard it is to change the water. I can confirm every complaint.

If I had to do it over I would have gone another route towards cooling my room.

Save 39% Off

Sunday, June 29, 2014

Viair 45040 450C Air Compressor Kit

Viair 45040 450C Air Compressor Kit
  • VIAIR 450C model air compressor with maximum working pressure rated at 150 PSI and 20 Amp draw
  • Oil-less design, with a gearless direct drive permanent magnetic motor, heavy duty PTFE piston ring and precision durable bearings for increased piston and motor life
  • CFM @ 0 PSI - 1.66 / CFM @ 100 PSI - 0.94
  • 100 percent duty cycle
  • Kit includes 450C compressor, mounting hardware with vibration isolators, freeze-resistant wiring, remote mount air filter assembly, air line for remote mounting air filter, heavy duty terminals and more

compact, very strong magnets in motor, can be felt outside case with steel bar, compressor seems like it is well made, even being an offshore import. i've had these two pumps in service for a month and they sound good and pumps well, will update in another 6 months if still no problem.

looks like this compressor could be mounted out in the elements as long as the intake port was piped to a clean location, i typically pipe these to the truck cab so it takes in cleaner and already partially dehumidized ( air conditioned) air.

Buy Viair 45040 450C Air Compressor Kit Now

Great if you need Air get this. I use this in my jeep for my locker, air tools and to reair tires. i also the the Viair 2.5 gallon tank. The combination of the Compressor and the tank is great. Is the way to go. I would recommend anyone to get both.

Read Best Reviews of Viair 45040 450C Air Compressor Kit Here

The compressor I had Prior to this was a piece of junk, but the Viar 450C is simply amazing. It airs in a quarter of the time as my previous compressor. HIGHLY recommend this product.

Want Viair 45040 450C Air Compressor Kit Discount?

I have used this compressor without trouble and it exceeds the requirements I needed for driving a pressure driven centrifuge for turning waste oil into diesel fuel.

Save 23% Off

I'm very pleased with the unit's performance and the fact it is rebuildable, though in my usage I don't forsee that need. I wish I could have had a faster shipping option because this was used on a Handi-cap van.

Sunday, April 13, 2014

Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer

Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer
  • 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty
  • Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
  • Durable yet lightweight magnesium housing and carbide tips for long life
  • 10.6 inches by 10.5 inches by 4.6 inches; weights 4.8 pounds
  • Backed by seven-year limited warranty

Just finished laying 42 sq with this gun, and I have nothing but praise. Well balanced and one of the lightest guns I have ever used. In 42 sq, one jam and about dozen nails left proud. Standard home store nails work very well in this gun and are easy and cheap to find. The tool-less depth of drive works just fine and the side-loading feature is great, very fast and easy. When it is out of nails, you know it, it will stop firing.

Yes, this is a contact "bump" nailer, and if you are getting double and triple misfires, you are using this gun WRONG. If you are laying shingles all day long and you have to pull the trigger on every nail, your finger will fall off. Put your shingle down, pull the trigger, and shoot four nails, next. That is the beauty of a contact nailer. On that note, BE CAREFULL, after a long run out, your finger has a tendency to stay on the trigger, if you were to then bump any part of your body at this point, you too will get nailed.

The Cons: Superficial really, come on Bostitch (and other mfg's), Give us a cheap plastic molded case for our expensive tools and would it have been so hard to have installed an air nipple at the factory, save me a trip to the hardware store.

Buy Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Now

I purchased the nail gun about three weeks ago. I am a foreman on a flat roofing crew who shingles on the weekends and on a few jobs that shingles are required. Last weekend I used the gun to shingle a 18sq ranch and was very enthused about how the gun ran. The gun never skipped, misfired, or jammed. I then took it to work to finish a shingle job on a 62sq roof. I dont like to use my own personal equipment on company time, but the way that the gun performed I knew that it would make the job that much easier. The light weight of the gun made the accuracy phenomenal and effortlessly quick. I had one jam while doing the ridge vent, which was easily fixed in 5 sec. The gun never had any other problem. This gun made shingling a joy.

Read Best Reviews of Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Here

My boss has 5-6 Hitachi roofing guns and I always thought they worked fine; didn't have to pound down hardly any nails. Then for a side job, part of my compensation was a new roofing nailer. In asking around everyone said to either go with Hitachi or Bostitch. Having already been using the Hitachi's I decided to try the Bostitch. What an awesome roofing nailer!! Blows the Hitachi's away. The single door side load canister is far easier and faster to load than the Hitachi's 2-door canister (side load for the nail feed, bottom load for the coil). Also I work in Minnesota and when the temp dropped to single digits every one of the Hitachi's started dry firing constantly and I ended up going and grabbing the Bostitch, which hasn't dry fired once (I would rather not have to use my own tools on my employers jobs, but the Hitachi's are junk in cold weatherthey work fine when the weather is warmer)

Want Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Discount?

I looked at this gun based on the journal of light constuction reviews I read july 06 issue. They liked the last nail capture feature and I must admit that this was my only complaint with my porter cable gun. So I bought one localy (same price as amazon with a case so it made up for the tax) and have done 3 roofs of about 20 squares each and really like it. I have seen lots of fusing on here about this and that but I muat say that if a tool was giving me this much fuse I would bring it in and see what the repair shop says. When I have had problems in the past our local reapir shop was able to get us a new gun, drill, or exstend our warranty with factory approval. I guess the second question is how much do you beat on your tools?...I tether not only my ladders and my self but my espensive tools too....nothing screws with a gun more than a three story drop. Well enough rambling...for the money an excellent gun...I still use my porter cable for a spare gun when we have an extra guy on the roof so I can't really bad mouth them...but if your banging out 5 or 6 squares a day by yourself 30 plus coils with our 12 pitch roof you appreciate the nail capture, easy load, and weight of this gun.

update: after a year this gun needed a rebuild because the nailes stopped advancing...and we bought the new portable cable while waiting for it to came back from the shop...we still prefer the Bos for its features but I will say the porter cables are more durable ....

Save 65% Off

I rented this gun prior to buying to make sure I wanted it. The rental unit worked great. Sure I had to set one or two nails manually and had at least one jam in every coil ... but isn't that the norm? So I purchased this gun from a local hardware store. What a mistake! The Bostich I bought (RN46-1) jammed every 10th nail and I had to set one too many manually. It took a 20 hour job and turned it into a 40 hour job. Needless to say when I returned the gun the first comment I got was, "Well you need to use Bostich nails." What? Are you kidding me? So I took my refund money, came here to Amazon and got the Hitachi NV45AB2, used the same box of coil nails and went to town on a roofing job. 20 coils later and I have yet to jam or manually set any of the nails. Do yourself a favor, stay away from the Bostich.

Friday, November 22, 2013

Senco A209909 18-Gauge-by-1-2-Inch Electro Galvanized Variety Pack Brads

Senco A209909 18-Gauge-by-1-2-Inch Electro Galvanized Variety Pack Brads
  • 1,200 brads per pack
  • Use for ouldings, picture-frame assembly, trim, and cabinetry building
  • Fewer tool jams than competitors
  • Highest withdrawal values for fasteners
  • Engineered to fit competitors' tools

Yes I did. Throughout hundreds of firings so far, these nails never caused a jam. Definitely a recommended product.

Buy Senco A209909 18-Gauge-by-1-2-Inch Electro Galvanized Variety Pack Brads Now

Product is great. Reasonable price. Works well in Firestorm Cordless Nail Gun. Good to have assorted sizes on hand.

Read Best Reviews of Senco A209909 18-Gauge-by-1-2-Inch Electro Galvanized Variety Pack Brads Here

I have a Dewalt cordless 18-guage nailer that I use for quick handyman projects. I keep this assortment kit inside the tool's case. It is small, clear and has everything from small to large for every need. I refill it from one-size packs of 1000+ nails that I can't fit in the tool's case.

Want Senco A209909 18-Gauge-by-1-2-Inch Electro Galvanized Variety Pack Brads Discount?

exellent value great assortment if your like me and just have the odd jobs to do

Save $0.04 Off

I bought these nails for use with the Hitachi brad nailer I bought on Amazon at the same time. The nails came in a variety of sizes and functioned flawlessly. I did not experience any miss fires or loading problems. I don't know how much credit goes to these nails or or the great Hitachi brad nailer, but both work great together. If you need just one size, I would only order the single size pack, however this variety pack was great for my needs and included plenty of nails in each size.