Showing posts with label rol air compressor reviews. Show all posts
Showing posts with label rol air compressor reviews. Show all posts

Tuesday, July 15, 2014

Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor

Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor
  • High efficiency 1.6-to-2-horsepower induction motor provides long life
  • The High output, no-maintenance oil-free pump delivers 3.4CFM @40psi and 2.7cfm @ 90psi--the large 6-gallon tank reduces run time
  • Lightweight compact pancake design for easy portability
  • Includes quick coupler
  • Weighs 52-pounds and includes a 1-year warranty

I bought it in November of 2002 I didn't use it till about 4 months later. Than I found the regulator wasn't working so I called Stanley and they said to send it to one of their repair shops in my state. It sat there for 1 month waiting for the part to come in. they fixed it (no charge) I have it back now and it's working fine. It came with a 2 1/2 inch nail gun. that works great also. I also use a 3-½ inch porter cable framing nailer with it and i've had no problem driving those nails in. the tank fills up very quick and last a long time between refills.

Buy Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor Now

I would recommend this compressor to any one.It does not pull very many amps so it can be used on a low amp breaker and a long extension card .I am a serviceman and have been using a craftsman dual tank compressor for many years. The bostitch compares to the craftsman.Have read reviews that people has said the bostitch is loud.All compressors that put out any volume of air will make noise and each compressor has there on tone of noise.I can not hear that this compressor is any louder than others. It just has its on tone.You can not go wrong with this compressor for medium use.

Read Best Reviews of Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor Here

I recently purchased 3 compressors form amazon the first was a Hitachi double hotdog which came broken and after parts (free from Hitachi) and my time still is leaking (disappointing) Second was this bostitch which I got as a package with the 3 guns and to be honest I only wanted the guns so this compressor was to be sold. Well because the Hitachi was down I used this and it does everything I wanted, quick, lite and not to loud. I'm not in a rush to fix the Hitachi now. By the way the third compressor is the little Senco. I will give a review on that after I use it this week.

Want Stanley Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor Discount?

Purchased this compressor w/Brad Nailer as a gift for my son. He used it once, then moved to an apartment, storing the unit with me. I went to used it and it would not bring up any pressure. Afraid I broke it so looked up a factory repair center. I brought it in and they told me "they did not want to mess with it". I said what? and the explained that this was so bad he had ten that customers have just told him to keep it. Also the factory rep came by and he could not even fix it. He went on to say he replaces the valves in them for $47 in parts +$40 in labor , the customers leave and return them next week broken with the same problem. Bottom line the nailer is great, but buy a Craftsman compressor and save yourself the headaches.

Save 42% Off

I have worked with this compressor for about a week and before that I was using a 30 gallon 220Volt rig that I have had for years.So,it is light and compact,irratingly noisy when filling but very portable.I like the convenience and the oil-less feature because I do a lot of trim work,like after new homes are sheetrocked,I will hang cabinets,interior doors as well as stairskirts,base,door casing and misc other trim details to complete the home.

Saturday, June 28, 2014

Air Compressor Pump 18.6 Cfm Displacement

Air Compressor Pump 18.6 Cfm Displacement
  • Triple Head Design
  • All Cast Iron rugged design
  • Flywheel and filters included
  • Oil lubricated
  • Large 18.6 CFM Displacement

Bought this for my father. Was not what he had expected. The return was easy. Getting a hold of someone was a little tricky but once you did they were very helpful and understanding.

Sunday, May 11, 2014

Legacy A73457D Color Connex Type D 7 Piece 1/4 in. Red Coupler and Plug Kit

Legacy A73457D Color Connex Type D 7 Piece 1/4 in. Red Coupler and Plug Kit
  • Industrial type D connectors in all red colors
  • Allows matching of couplers for dedicated hose applications.
  • Push connect easy connect system
  • Female and Male couplers are the same color

Solid brass is the only way to go for high use, but these are nice for air tools that aren't used too often. It is really nice that they are anodized aluminum in different colors. This set does not leak at all so far and I am happy with my purchase.

Buy Legacy A73457D Color Connex Type D 7 Piece 1/4 in. Red Coupler and Plug Kit Now

Excellent color coded connectors for use with a new Makita MAC700 big bore air compressor. A few things to know however:

1. You must also buy pipe tape (a.k.a. teflon tape, blue or yellow kind doesn't matter) 1/2" x 260" Teflon Pipe Thread Seal Tape or pipe dope to apply to the threads before sealing this to the rubber hose you're using. Otherwise you will bleed air. This is for ALL connectors not just Legacy Connex. Funny how few connector reviews mention this.

2. The Legacy Connex couplers use a much larger wrench size than the plugs. I actually didn't have a big enough wrench to use on the couplers so I ended up having to use a vise grip with terry cloth towels to minimize scuffing of the metal. Not a deal breaker just didn't have it in my standard metric wrench set.

Convenience of the quick connects make this a must have for swapping out air tools quickly. the red paint is so pretty that you'll end up being super gentle with the hose to minimize scratches (i.e. no careless dropping of an unattached hose on the garage floor with these on).

Would definitely buy these again.

Read Best Reviews of Legacy A73457D Color Connex Type D 7 Piece 1/4 in. Red Coupler and Plug Kit Here

Having just bought an air compressor (Makita MAC2400 Big Bore 2.5 HP Air Compressor), and some air tools, I needed some fittings.

This worked in hooking up my tubing to the compressor, and setting up a few air tools as well.

I don't need to separate air lines yet, but this seems like a good way to make it easier.

A bit more expensive than standard kits, but seems worth it.

Want Legacy A73457D Color Connex Type D 7 Piece 1/4 in. Red Coupler and Plug Kit Discount?

Nice be able to pick color for seperate tools. Helps save time to work faster. I have several sets, and they are holding well in home use.

Save 10% Off

Arrived as promised. Good packaging, no damages.Perfect fit on my hose and attachments, no leaks. Will buy again if I need more!

Sunday, April 13, 2014

Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer

Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer
  • 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty
  • Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
  • Durable yet lightweight magnesium housing and carbide tips for long life
  • 10.6 inches by 10.5 inches by 4.6 inches; weights 4.8 pounds
  • Backed by seven-year limited warranty

Just finished laying 42 sq with this gun, and I have nothing but praise. Well balanced and one of the lightest guns I have ever used. In 42 sq, one jam and about dozen nails left proud. Standard home store nails work very well in this gun and are easy and cheap to find. The tool-less depth of drive works just fine and the side-loading feature is great, very fast and easy. When it is out of nails, you know it, it will stop firing.

Yes, this is a contact "bump" nailer, and if you are getting double and triple misfires, you are using this gun WRONG. If you are laying shingles all day long and you have to pull the trigger on every nail, your finger will fall off. Put your shingle down, pull the trigger, and shoot four nails, next. That is the beauty of a contact nailer. On that note, BE CAREFULL, after a long run out, your finger has a tendency to stay on the trigger, if you were to then bump any part of your body at this point, you too will get nailed.

The Cons: Superficial really, come on Bostitch (and other mfg's), Give us a cheap plastic molded case for our expensive tools and would it have been so hard to have installed an air nipple at the factory, save me a trip to the hardware store.

Buy Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Now

I purchased the nail gun about three weeks ago. I am a foreman on a flat roofing crew who shingles on the weekends and on a few jobs that shingles are required. Last weekend I used the gun to shingle a 18sq ranch and was very enthused about how the gun ran. The gun never skipped, misfired, or jammed. I then took it to work to finish a shingle job on a 62sq roof. I dont like to use my own personal equipment on company time, but the way that the gun performed I knew that it would make the job that much easier. The light weight of the gun made the accuracy phenomenal and effortlessly quick. I had one jam while doing the ridge vent, which was easily fixed in 5 sec. The gun never had any other problem. This gun made shingling a joy.

Read Best Reviews of Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Here

My boss has 5-6 Hitachi roofing guns and I always thought they worked fine; didn't have to pound down hardly any nails. Then for a side job, part of my compensation was a new roofing nailer. In asking around everyone said to either go with Hitachi or Bostitch. Having already been using the Hitachi's I decided to try the Bostitch. What an awesome roofing nailer!! Blows the Hitachi's away. The single door side load canister is far easier and faster to load than the Hitachi's 2-door canister (side load for the nail feed, bottom load for the coil). Also I work in Minnesota and when the temp dropped to single digits every one of the Hitachi's started dry firing constantly and I ended up going and grabbing the Bostitch, which hasn't dry fired once (I would rather not have to use my own tools on my employers jobs, but the Hitachi's are junk in cold weatherthey work fine when the weather is warmer)

Want Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Discount?

I looked at this gun based on the journal of light constuction reviews I read july 06 issue. They liked the last nail capture feature and I must admit that this was my only complaint with my porter cable gun. So I bought one localy (same price as amazon with a case so it made up for the tax) and have done 3 roofs of about 20 squares each and really like it. I have seen lots of fusing on here about this and that but I muat say that if a tool was giving me this much fuse I would bring it in and see what the repair shop says. When I have had problems in the past our local reapir shop was able to get us a new gun, drill, or exstend our warranty with factory approval. I guess the second question is how much do you beat on your tools?...I tether not only my ladders and my self but my espensive tools too....nothing screws with a gun more than a three story drop. Well enough rambling...for the money an excellent gun...I still use my porter cable for a spare gun when we have an extra guy on the roof so I can't really bad mouth them...but if your banging out 5 or 6 squares a day by yourself 30 plus coils with our 12 pitch roof you appreciate the nail capture, easy load, and weight of this gun.

update: after a year this gun needed a rebuild because the nailes stopped advancing...and we bought the new portable cable while waiting for it to came back from the shop...we still prefer the Bos for its features but I will say the porter cables are more durable ....

Save 65% Off

I rented this gun prior to buying to make sure I wanted it. The rental unit worked great. Sure I had to set one or two nails manually and had at least one jam in every coil ... but isn't that the norm? So I purchased this gun from a local hardware store. What a mistake! The Bostich I bought (RN46-1) jammed every 10th nail and I had to set one too many manually. It took a 20 hour job and turned it into a 40 hour job. Needless to say when I returned the gun the first comment I got was, "Well you need to use Bostich nails." What? Are you kidding me? So I took my refund money, came here to Amazon and got the Hitachi NV45AB2, used the same box of coil nails and went to town on a roofing job. 20 coils later and I have yet to jam or manually set any of the nails. Do yourself a favor, stay away from the Bostich.

Thursday, April 3, 2014

NewAir AC10000E 10,000 BTU Portable Air Conditioner With AutoEvaporative Technology

NewAir AC10000E 10,000 BTU Portable Air Conditioner With AutoEvaporative TechnologyI rated this 3 stars which Amazon defines as "It's OK" which is how I feel about it :)

* Size/Weight/Move-ability 10/10 -I think the size and weight are fine, the unit is heavy (~50lbs) but not so heavy that you can't lift it from the box, it does have handles on the side to grab, and rolls in any direction on casters. It's not very large, about the size of a modern dehumidifier or mini-fridge

* Front Panel/Controls 5/10 -The controls are straight forward and easy to use, the exception being that when you're in the "AUTO" mode you can not adjust the fan speed, it's a little odd. The big problem, and why I rate it 5/10 is that there are six SUPER BRIGHT LEDs on the front of the unit, as far as I can tell they serve no purpose whatsoever, they are simply there and they are on whenever the unit is on. When it's bright in the room it's not a big deal, but at night when you're trying to sleep this is a big issue, I'm probably going to have to cut out little wedges of electrical tape or something to stick over them. It comes with an IR remote that lets you control it as well. The display on the front will show the room temperature normally and when you are adjusting the temperature controls up and down it will change to show the desired temp for a few seconds. One note here is that the unit seems to stop cooling even when you're a good 5*F or so away from the desired temp--Example, it was 78* in my room last night and I set the unit for 73* it was running for a while but when the temp hit 77* the compressor shut off for a very long time and the room started to feel hot, temp went back up to 78* and it clicked back on... this may just be a quirk with my unit or something, but my window-mounted a/c will keep running until their ambient temp sensors equal the desired temp setting.

* Window Adapter/Hose 8/10 -This is a single hose model, that means that it sucks air from the room to blow over the condenser (hot part) and then that air is blown outside; something to keep in mind is that you are sucking air from the room which means you are blowing your "conditioned" air outside as part of the normal process, as a result this unit will not cool a room as efficiently as a dual-hose model or a window/wall unit which both use outside air to cool the condenser--so this 10kBTU model will not cool a room as well as a 10kBTU window unit (it might be more comparable to a 7-8kBTU?). The window/hose adapters are decent quality, the only complaint I have is that I wish the adapter were "taller", my window sill is about 1" high, as a result the hose hits the sill before it the adapter hits the base, this isn't a big deal, but just wanted to note it. Another thing to note, some people complain about the window adapters not sealing very well--this one seems to do an OK job, the window just closes on the flat top of the adapter as a seal. The thing to keep in mind w/ these portable a/c's is that having a fantastic seal is not really expected or needed for the unit to operate, you get just as much air leakage around window mounted a/c's. The window adapter, hose adapter and hose are all well constructed and made of good materials--one tip: first screw the hose onto the unit, then screw the wide-mouth adapter thing onto the hose, THEN put the wide-mouth adapter into the window adapter, if you buy this you'll see what I mean :)

* Cooling/Air Output 10/10 -Works great! Very cold air, and it blows the air fast out of the vent, much better then my window mounted units which feel like they just dribble out air sometimes

* Noise 7/10 -First: It makes noise, all air conditioners do, if you need silence to sleep then you need another solution other then window/portable a/c's, I can sleep with the "white noise" of a fan/motor running. The unit is no louder then my 8kBTU window-mount unit when operating with and without it's compressor running; however, the reason I give it a 7/10 is that the unit tends to make more noise when the compressor turns on and off then my window unit does, in addition the compressor cycles on/off very often and for short periods, which exacerbates the issue. So far it has been waking me up, and that's not good, it remains to be seen if I can used to the noise, or this will become an awake-only unit.

* Draining 5/10 -With low room humidity this unit should be able to exhaust most of the water out with the waste air, which means no draining... but with high humidity you need to drain the unit, this an issue on this unit because unlike other units it does not drain into a bucket which can be removed and dumped out. With this unit you need to put a "shallow pan", as the instructions say, under the drain cock and open it... well this pan needs to be really shallow (see my user submitted image) because the drain cock is only about 1-2" off the floor! I can envision this being a real nightmare to empty and I'm not looking forward to really humid days

Overall I think this is a decent portable a/c, and I'm hopeful that it will work out.

Summarized my main concerns are:

1) Does not have a bucket to empty, if it needs draining that will be very difficult w/o a bucket

2) Front Panel LEDs are super bright and always on, makes it difficult to sleep

3) Compressor makes more noise then expected when starting/stopping, this wakes me up at night

Summarized the pro's are:

1) Very good air output--lots of volume and pressure

2) Cold output! Great for spot cooling, move the unit near you and you'll freeze your butt off even if the rest of the room is warmer then you might like

3) Easy to move around on the casters

4) Reasonable price

I bought this for my elderly mother because she has electronic gear set up in her bedroom and being on the 2nd floor it would get too hot in there for her safety in my opinion.

First of all, it is easy to install. I was worried about the exhaust hose through the window because that seemed complicated and way above my head. I had my brother come over and install it even though he assured me even I could do it :P It took him 20 minutes total. And MOST of that time was setting up the basics like where she wanted it and the direction it faced etc. The exhaust hose was trivial and it fit in her window just fine even though she has a sliding window left to right not up and down. It takes up a small space in the window and from the outside I didn't even see it.

It was heavy for me, but probably fine for most people.

It has a thermometer on the front so it tells you what temperature it is at when you start it and continues to update you as it goes down. It was 95 when she turned it on and within an hour it was down to 83. So basically it cooled her room by 12 degrees. That may seem small but also keep in mind it is constantly blowing cold air so she could point it at herself and it was instant relief the entire time. It has a remote too so she could adjust it from her bed.

I can't remember the wattage of it so check that. It is something like 1200 watts? Our only problem was that most fuses can only handle a total of 2000 watts.(I am typing this from what I was told so forgive me if my numbers are not 100% accurate) It was on the same circuit breaker as my bathroom and my hair dryer is 1200 watts so when I used it it blew a fuse. No big deal once I moved my hair dryer to another outlet.

IMO 12 degrees is worth it, especially since you might even get better results of you don't have all of the electronics she has.

This was also a great price compared to the other models I looked at which got bad reviews.

Buy NewAir AC10000E 10,000 BTU Portable Air Conditioner With AutoEvaporative Technology Now

Product was ok, but never went lower then 75. I guess when it's in the 90s 75 is cool enough.

Read Best Reviews of NewAir AC10000E 10,000 BTU Portable Air Conditioner With AutoEvaporative Technology Here

I recently purchased this item when we got hit with a "heat wave". Homes up here are rarely built w/ air conditioners so there weren't any fans or a/c units to be found in the Pacific Northwest. I purchased this unit to stay cool for a couple of days and it did the job. It was pretty much ready to go once I took it out of the box. I just had to put in the filter (which is plastic so it can be rinsed, dried and reused) and attach the tubing to my window. Very easy to use. I like that you can control it with a remote or with the buttons on the front. I had read that some other units only come with a remote, so if you loose it, you're stuck w/ whatever setting it was last on until you get a replacement remote. This unit has caster wheels and is easy to push around to where I need it. The noise level was quieter than a box fan. Overall, I am very pleased with the A/C unit and I think it served it's purpose very well.

Want NewAir AC10000E 10,000 BTU Portable Air Conditioner With AutoEvaporative Technology Discount?

I received this unit and it appeared to be of good quality. The set up was simple and I quickly was able to start it up. Initially it seemed to be working fine albeit with a fair amount of noise (which I expected). Unfortunately, I quickly noticed the compressor was cutting out and the unit stopped cooling. That night it was cooler outside than in my relatively small bedroom. I returned the unit the next morning.

Save 30% Off

Sunday, February 9, 2014

Portable Air Compressor Cordless

Portable Air Compressor Cordless
  • 18 Volt Battery operated [Works with ANY Ryobi ONE+ Battery, not-included]
  • 0-150 PSI with a Fully Charged Battery in place
  • Easy to use controls allow automatic shut-off at any pressure
  • Digital read-out for accurate inflation pressure
  • Storage compartment for the accessories

I love most Ryboi stuff but this compressor cannot give an accurate reading on the digital read-out that's within 20% accurate. What is inflated is the price on Amazon of $90 when Home Depot has it for $40.

Buy Portable Air Compressor Cordless Now

Is a great tool, for inflating bike and car tires. Also for inflating floats for the pool. The coupling on the hose no longer holds on a valve stem, so after several years of service, I will buy another one; at Home Depot for about $50 LESS.

Read Best Reviews of Portable Air Compressor Cordless Here

First off, I have used close to a dozen Ryobi One tools over the years and have been pleased with most of them. Not this time.

I connected the high pressure valve to a water expansion tank and used the thumb lock to secure it. Air started leaking out of the valve even though it was shut. After removing the valve I noticed that the stem inside that pushes down when the thumb lock is engaged was not centered.

I then took the thumb lock apart and found that the plastic piece had cracked and created a hole next to the stem.

I returned it to Home Depot and got another one. I had the same issue with the second one. Note that I have used the valve from my bike foot pump on this same tank and it had no problem sealing and nothing cracked.

It seems to me Ryobi is using cheap materials in one of the locations where the largest amount of stress will occur. Bad design and material choice.

Friday, August 16, 2013

Meriam M600KT Combo Pneumatic Calibration Pump Kit

Meriam M600KT Combo Pneumatic Calibration Pump Kit
  • Pneumatic pump kit
  • Vacuum 28'' Hg to pressure 600psi (combination pump)
  • Compatible with all gauges and calibrators
  • Connections (2 ports) 1/4" and 1/8" NPT/BSP

Realmente es muy buena , la uso para trabajos de campo, calibración de manómetros y transmisores de presión , se puede pasar de vacío a presión positiva, sólo pulsando el pasador, excelente capacidad de bombeo por cada accionamiento. Yo pude calibrar 8 vacuometro en tiempo récord . Su mayor fortaleza es que puedes pasar de presiones negativas a presiones positivas , tan solo moviendo el pasado, sin la necesidad de hacer ningún cambios de conexión .esto ahorra un tiempo considerable a la hora de calibrar instrumentos de presión absolutas . El vacío máximo que e logrado alcanzar es 26,5 inHg.

Debo agregar un segundo comentario : la bomba funciona muy bien desde -26 inHg hasta los 100 psi, para más de 100 psi es extremadamente dura para accionar la con una sola mano. Sólo llegue 290 psi haciendo un gran esfuerzo con las 2 manos . Conclusión no la recomiendo para presiones mayores de 100 psi . Aunque las especificaciones técnicas dice hasta 600 psi , realmente no es así.

It really is very good, for field use, calibration of pressure gauges and pressure transmitters, you can go from vacuum to positive pressure, just by pressing the pin, excellent pumping capacity per drive. I could calibrate eight vacuum gauge in record time. Its greatest strength is that you can go from negative to positive pressures pressures, just moving the past, without the need to make any connection changes. This saves considerable time when absolute pressure gauge instruments. The maximum vacuum is achieved and 26.5 inHg.

I must add a second point: the pump works great from -26 inHg to 100 psi, for more than 100 psi is extremely hard to trigger with one hand. Only reaches 290 psi working hard with 2 hands. Conclusion not recommend for pressures greater than 100 psi. Although specs say up to 600 psi, it really is not

Save 9% Off