GOODYEAR 46562 1/2-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/2-Inch MNPT Ends

• Solid brass end fittings: 1/2-Inch MNPT
• Spiral synthetic yarn reinforcement
• Abrasion-resistant rubber outer jacket
• 100-percent made and assembled in the USA

I had purchased a new Chicago Pneumatic 3/4" impact and needed better CFM air flow than is provided by the 1/4" NPT 3/8" hoses that are most common. My only 1/2" air hose was 25' Goodyear "Red" hose and connected a small sandblaster, so I needed a second one for proper performance from my new 3/4" impact tool and longer for my large home garage use. Of course, I also purchased new couplers and fittings to keep that flow high on my new 1/2" air hose. I found the 3/8" x 1/2" NPT Dixon Air Chief Industrial I needed were in stock at Amazon, and purchased all of them I needed directly from Amazon to complement the new 1/2" air hose (the 1/2" hose purchased through Amazon from Buzzard Gulch Inc). I also purchased a new 50' 3/8" x 1/4" NPT air hose direct from Amazon at a great low price too low to pass by. Both hoses arrived on the same day and in very quick order using standard shipping.

The lower prices here kind of made it a one stop shopping adventure at Amazon one that saved me some cash! As for the 1/2" GoodYear air hose, it is Goodyear's yellow premium hose, and you can expect it to outlive the GoodYear red hoses and all of those by cheaper manufacturers. Okay, it also offered me exactly what I needed in my garage at a lower price than my now 10 year old Red GoodYear hoses and the hose also came with quality brass 1/2" male hose ends that were well protected and undamaged. There's only one thing that bothers me, the hose looks so good I just have to wipe it clean to keep it from showing dirt, even though it is oil resistant and I then roll it back up every time I use it. It has me hooked on that pretty yellow color. This is the 1/2" Yellow higher quality 300 PSI certified working pressure hose you would expect from GoodYear. The Yellow just shows dirt the good, but lower quality, Red GoodYear hoses (rated 250 PSI working pressure) don't show as well.

Update 10/29/11:

The Goodyear 300 PSi hoses I purchased last year from Buzzard Gulch through Amazon have solid brass fittings, as were described at the time. I would have no use for a factory installed two-piece swivel fitting at the ends of my air lines considering I use industrial type quick connects. The solid one-piece OEM pipe thread fittings on my hoses are secured to the hoses with a thick high quality brass crimp connector. After a year of use on concrete, with a full-time 175 PSI heavy duty 7 1/2 HP Eaton air compressor, none of my hoses or hose fittings leak not even the Dixon Air Chief industrial quick connect fittings I also use with them. If there is anything annoying I can't stand, it's leaking air fittings. To date, I still have no leaks anywhere.

Here's some tips:

Use a swivel fitting snubber hose between your large air hoses and all tools, and don't overtighten fittings or twist the factory fittings inside the hose during installation (rotate the hose with the fitting) your large air hoses will last longer that way, and the swivel fitting snubber hoses often make tool use much easier. I found and purchased the 1/2" x 8' Legacy ZillaWhip here at Amazon to complement my 3/4 impact, and to make this new heavy Goodyear hose easy to work with. Using industrial type couplers will also provide better sealing at quick coupler fittings and allow for easier hose storage. Also, use soapy water to check all hoses and fittings as you install them. For much greater hose life, remove air pressure from any hose not in use. Most better compressors have an air valve installed specifically for this purpose. Most important protect your rubber hoses and tools from oil and particle contamination by using a coalescing filter. This will help insure longer life hose and tool life. Enjoy the best, and ignore the rest.

Buy GOODYEAR 46562 1/2-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/2-Inch MNPT Ends Now

I bought two of these hoses when I switched my shop over to 1/2 inch ID air lines to run my sand blast cabinet. One was a 50 footer to use with air tools and the other was a 25 footer to use with the sandblast cabinet. My shop is 50x35 and I figured I could combine both hoses for a combined length of 75 feet if that became necessary.

Then I decided to run a outside air line at each end of my shop so I could run my 3/4 inch impact or my pressure pot for my sandblaster to blast items too large for the cabinet,so I bought another 50 footer so I could bring the impact or the pressure pot close to the work.

These hoses are all very high quality items I would recommend to anyone. The only reservation is that because of their outside diameter and 300 psi pressure rating they are very thick and stiff. This is really good if you have had trouble with kinked 3/8th hardware store hoses cutting off your air because that problem doesn't exist with these hoses. This is not so good if you want to coil it tighthy on a smaller diameter hose reel. If a hose reel is important to your operation,you are going to have to buy one made for half inch ID air hoses. I have seen these reels with the hoses mounted as part of a package deal on Amazon,so if you need a reel, look for the combo purchase and save a few dollars. I just coil mine over a garden hose holder I screwed to the wall.

These are very good hoses that make me wish I had not wasted my money by ever buying any of the off-brand hardware/Chinese Tool Outlet hoses to start with. If your compressor pumps out enough CFM of air to use these hoses,don't waste your time or money buying anything else.

Read Best Reviews of GOODYEAR 46562 1/2-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/2-Inch MNPT Ends Here

I purchased four of these hoses and have used three of them thus far. The hose is excellent quality but the threaded couplers at the ends are two-piece brass and they all leak between the two brass parts. The product description says the ends are "solid brass" but in fact these couplers are two pieces that evidently weren't crimped together tightly enough during manufacture.

I would estimate close to a CFM average leakage per hose so unless you have a large air tank your compressor will be cycling frequently. I will be replacing my hose ends with the Senco style push on ends, which in my experience have never leaked.

Want GOODYEAR 46562 1/2-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/2-Inch MNPT Ends Discount?

This hose has already seen a lot of use down-hole for well digging, and it's held up very well. The fittings are tight and the hose itself is very strong. The one I purchased has 1/2" fittings, which ensures plentiful air supply to the well drill.

Hitachi EC119SA 15 amp 2.5-Horsepower 4-Gallon Twin-Stack Air Compressor

• Quiet operation and extended life
• Powerful 15 amp-induction motor
• Protective roll cage design protects the pump and motor from damage
• Includes 2-inchdustrial couplers, oil dipstick, and 8-ounce synthetic oil
• 1-year limited warranty
• (2) factory installed couplers
• Cast iron, oil lubricated pump with oversized bearings for quiet, dependable service
• Comes with a 1-year limited warranty
• Contractor preferred 4-gallon twin stack tank
• Powerful induction motor

I purchased one of these units and was very pleased for about 3 months. The unit ran great and was very quiet for a compressor due to the induction motor. Running it indoors you can actually talk over top when its running and hear the other person. At 3 months the unit stopped working and would only hum without kicking on. After replacing with a new unit I was ok for about 3 weeks and the same problem happened. The issue is the oil level. Hitachi supplies a small bottle of 5w-50 oil and the instructions are to fill on a level surface to a point between the notch on the dip stick. The first time I over filled slightly using about 4/5 of the oil supplied. on the second unit I filled to the required level or about 2/3 of the oil supplied. Both units eventually seized. After speaking with a customer service I found out the supplied oil is premeasured and ALL THE OIL SHOULD BE ADDED. I found Hitachi to have very good customer service, the first unit was replaced and the second serviced at no cost. My opinion is this is a very good unit with a small design flaw on the oil pickup system and instructions which should tell you to add all the oil. Also note, when they say don't operate at more than 10 degrees angle, they mean it. The oil will not get to the crank and the unit will seize. This unit is very small, very portable, extremely quiet unit and supplies 4.cfm @ 90psi all of which is a great combination. I would have given 5 stars except for the lost time and effort of not properly addressing the oil issue for this unit. At the end of the day I purchased a dewalt D55146 oil free unit for a backup as jobsite reliability is key for me. I hope the Dewalt performs better over the long run.

Buy Hitachi EC119SA 15 amp 2.5-Horsepower 4-Gallon Twin-Stack Air Compressor Now

I ordered this compressor and was excited to recieve it. UPS does it again. The release valve was snapped off. I will give a full review when I talk to Hitachi and get a new one.

Update: Had to pay a machinest to tap out the broken value. Hitachi customer service was awesome and sent me the replacement parts for free but now the compressor is leaking at the plastic hose that uses a preasure fitting to hold it in. I buy a lot of tools and never have had an issue. I would not take my experience as a negetive. Hitachi is great I just got a lemon.

Read Best Reviews of Hitachi EC119SA 15 amp 2.5-Horsepower 4-Gallon Twin-Stack Air Compressor Here

This is the first air compressor that I've purchased, although I've used them on-and-off for years. After a lot of research, I concluded that the quality level of unit that I wanted, I could not afford. There is a significant jump in build/design quality when you go from the $125/$300 range to the $300/$500 range. I need one only for home remodeling/garage use, but I didn't want to buy junk. When I found this unit factory reconditioned, I bought one immediately. After 1 week of use, I am very happy with my decision. It is well made, easy to use, fairly quiet, has a very low tank fill time and recovery time, and is a notch above homeowner-grade tools. The unit isn't light, about 65 lbs, but that's due to the liberal use of metals instead of plastics. It arrived in almost like-new condition. It looks as though is was only used once or twice, then returned. You can download the manuals that originally came with it from Hitachi's website. Highly recommended.

Want Hitachi EC119SA 15 amp 2.5-Horsepower 4-Gallon Twin-Stack Air Compressor Discount?

Owned this air compressor for 1 year. Used it to frame and sheath a house, sheath and shingle three roofs and trimming out two complete interiors.

My experience is as follows;

Framing

Compressor kept up with two Hitachi NR90AE framing nailers providing the nailers were not used in "bump" mode for several consecutive shots.

Barely able to keep up with one Hitachi NR90AE framing nailer in "bump" mode firing several consecutive shots.

Completely unable to keep up running two Hitachi NR90AE framing nailers in "bump" mode firing several consecutive shots.

Sheathing

Compressor kept up with two Hitachi NV83A3 coil nailers providing the nailers were not used in "bump" mode for several consecutive shots.

Barely able to keep up with one Hitachi NV83A3 coil nailer in "bump" mode firing several consecutive shots.

Completely unable to keep up running two Hitachi NV83A3 coil nailers in "bump" mode firing several consecutive shots.

Roofing (Shingles)

Compressor kept up running one Hitachi NV45AB roofing nailer applying five nails per shingle.

At times would not keep running two Hitachi NV45AB nailers applying five nails per single without waiting approx 45 seconds to fully recharge.

Trimming

Compressor kept up running two MT65A4 finish nailers or two NT50AE2 finish nailers.

I recently purchased a second Hitachi EC119SA for back-up and will run two compressors when "bump" nailing the large framing and coil nailers.

The compressor must operate on a dedicated 15 amp circuit or 20 amp circuit. Due to the oil lubricated pump the compressor can not operate on more then a 10 degree angle.

I have not used the compressor in temperatures below 48 degrees so I can not comment on the reported poor cold starts. I do know other name brand oil lubricated compressors also experience poor cold starts.

So far for the money I had good luck running these compressors!

Save 60% Off

I have had this unit for a couple years, with only occasional use filling tires, blowing sawdust out of chainsaws, etc. MAYBE 10 or 12 hours of total continuous run time. Recently the pressure reducer/regulator control failed I have rarely made changes to the delivered pressure, so I think the part was just defective from the beginning. As others have noted, in cold weather the unit does not start up easilyeither trips it's internal breaker or the house breaker. It can take some time playing with it to get it going. In warmer temps this is not a problem.

(Over a year later...) I have run the compressor a lot since I changed out the reducer/regulator, and it has been a good performer since then.

Legacy L8306 3/8-Inch x 75 Retractable Air Hose Reel

• Levelwind layering mechanism ensures the hose retracts evenly and easily
• 3/4-inch ID swivel reduces flow restrictions and improves performance
• User can select "Free Run" for fast rewind or "Latching" to latch the hose
• Mounting bracket allows the user to secure the reel in 1 of 7 positions
• Includes hose

This Legacy L8306 3/8" x 75' Retractable Air Hose Reel is very nice, I am just a guy who likes neet work areas such as my garage and basement, I have a 50' retractable air hose reel from another manufacturer and it is not nearly as nice, I really like the way it retracts the line and reels the hose back and forth so it doesn't get tangled internally, in my garage I had my old unit hard plummed but had to add another piece of galvanized pipe to make up for the short 3' lead, if you can swing it opt for the 75 ft. and not the 50 ft. the extra 25 ft. makes a difference I no longer have to run a second line

Buy Legacy L8306 3/8-Inch x 75 Retractable Air Hose Reel Now

This review was precipitated not so much by the quality of the L8306 Legacy air hose reel, as it was by the Legacy's customer service actions. Upon opening my new Legacy L8306 reel, it quickly became apparent that the 3' lead-in hose was woefully short. While I can envision some utilizing a 3' lead-in hose, it would likely only be those with vertical air compressors mounting their Legacy reel in VERY CLOSE proximity to the compressor...and in direct line so as not to have any acute hose bends. The vast majority of reel users either would have to have hard-wired air systems, or simply use a 25' or 50' air hose to bridge the lineal space gap between compressor and reel mounting position. I fell into the latter category.

I had many 50' reels of air hose lying around, and could have used one of these hoses to bridge the compressor / reel gap...but the more I got to thinking about it, the more irritated I became. After all, this hose reel is not cheap in price...adding an extra 7' of air hose would surely add very little real cost to Legacy. After years of running a large manufacturing firm, I logically assumed some CFO or other financial wizard concluded that reducing the lead-in hose from 10' to 3' would add 0.0000001% to Legacy's bottom line. No doubt that financial gain was real...but at what intangible cost to Legacy as a company? Remaining PO'd, I stopped my installation and found Legacy on line, and dropped them an email stating that a company's financial gain can be dramatically offset via longer term customer dissatisfaction. To my pleasant surprise, I quickly received a polite email response from Legacy, stating "We take a lot of pride in our products and always aim to please. The length that we provide is based on what is most often recommend by our distributors and customers. Many people place their reels very near to the source and therefore only need a few feet of hose for their lead in. We also are aware that there can be a need for longer lead-in hoses depending on the layout of the shop. Because we recognize that there is still a demand for this, we do offer various sizes of lead-in hoses. I am having a 10' lead in hose sent to the address that you provided below. I hope that you will continue to purchase Legacy products. Have a great weekend!" I received my free 10' lead-in hose in short order.

While I still do not agree with Legacy's customer rep statement that "The length that we provide is based on what is most often recommend by our distributors and customers..." reflects most users' needs, I remain duly impressed with Legacy's customer service business acumen. I also add that NO WHERE on line could I find longer Legacy (or other manufacturer's brands)lead-in hoses, as Legacy lead-in hoses require a male end fitting for their specific units. If I could have found a longer lead-in hose, I would have simply purchased it...I would still be burned up...but would not have been irate enough to contact Legacy.

But enough ranting...my heart soars to find an industry that is attentive to customers. Yes, the reel seems OK...lots of plastic, but functionally all there. And yes, I'm confident that some Legacy bean counter still sticks to his/her guns about "desirable" lead-in hose lengths. Perhaps if enough customers voiced their opinions, the noted Legacy bean counter would be chastised as those involved in actual Legacy operations and sales applauded.

Read Best Reviews of Legacy L8306 3/8-Inch x 75 Retractable Air Hose Reel Here

I've not used this much yet and this is the first retractable reel I have ever owned. It works pretty well except at times there is a certain point in the retracting process that it is slow in reeling the hose up. It just may need for the spring tension to be adjusted. I'll revisit this review after I do that.

I've used this now for 3+ months and I really like it. The only negative I've found is on cold days (Below 40) it is slow rolling the hose back in which I contribute to the hose being too stiff. A more supple hose would make this much better!

Want Legacy L8306 3/8-Inch x 75 Retractable Air Hose Reel Discount?

So Far this Retractable Air Hose Reel is much better than the old retractable hose reel I replaced. I particularly like the feature that the hose is evenly distributed around the drum as it retracts. I also like the way the hose reel catches when you are reeling it out to use. All you have to do is pull out how much hose you want and listen for it to click and then stop. You have the correct amount of hose to use. It is also a sturdy unit and I am very happy with it. The price from Amazon.com was less than any other marketer I could find. I highly recommend other people purchase this product.

DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer

• Sealed Lube Dual Tech: motor works as an oil free and oil lube unit.
• Tool-free features: adjustable belt hook, nail depth adjustment, jam clearing, 360 degree exhaust
• Uses 1-inch to 2-1/2-inch (25.4-milimeter-65-milimeter) 34 degreecollated nails, rear load;
• Includes carrying case, sample finish nails and safety glasses
• Low profile no-mar pad;Sequential action trigger installed

This is the one.

I had the oportunity to try several 15 guage nailers after deciding that my 16G Porter Cable could not do the job I wanted it.

Don't get me worng. My PC is the best 16G nailer in my arsenal but I needed something more.

I tried the Hitachi 15G, the Senco, and the Bostich.

I then tried the Dewalt and I was hooked. I was ready to buy the Hitachi, but the Dewalt went down to a 1" over the Hitachi 1 1/4" and the balance of the Dewalt just felt better in my hand. I also liked the feel of the trigger, plus the fact that I could access the depth adjustment more readily on the Dewalt over the Hitachi.

I have run about 16 hours of work with the tool so far and I am very happy with it. I run it with oil, since there is no better way to protect the seals and rings. I know that Dewalt advertises that you can run the tool without oil, but do not do it. You will just eat away at the life of the seals and piston rings.

No doubt a winner. Much improved over its previous D51275K.

Buy DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Now

I bought this nailer 4 months ago and went around and around trying to get nails that worked with it. The angle on Senco DA nails is slightly less than the nails that came with the nailer. I also tried a few after market nails--same deal. Finally I ordered Bostitch DA nails and they are exactly the same as the ones that came with it. Probably they are purchased by DeWalt for the kit. The Senco nails even say that they are for this gun on the package. They shoot 3 or 4 times and jam. Bostitch run great.

-Matt in Wisconsin

Read Best Reviews of DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Here

This gun is very smooth, it sets the nail just right.

I have used several differant guns professionally and this one is very desireable. If you want to save $20 and get junk that will jam at crunch time buy somthing else. If you want reliable smooth quality get this one....

Want DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Discount?

I bought this nailer used in mint condition on Amazon. Seems to work fine. I am using Porter and Cable 2 1/2" nails and it shoots them well if you don't slam the nail bolt forward. If I slam it the nails seems to wedge in the delivery ramp and don't feed. A minor thing but it took me a minute to figure out why it was only shooting one nail and then stopped. Since then I've used it with no issues.

Save 54% Off

Bought this to install new hardwood flooring in a rental condo we were renovating and couldn't be happier with my choice. It is easy to use, well-made and I'm certain will last for many, many years to come. I'd never installed hardwood flooring before and after a few test "shots" into some scrap plywood I was successful in laying 120 square feet of 3/4" Maple and 25 square feet of Brazilian Redwood with nary a glitch. Getting the correct angle on the "tongue" of hardwood flooring is really the only skill you need to learn and, once you've got that, it's a breeze and you'll be installing floors that look truly professional.

Grex GCK01 Combo Kit with Genesis.XT and AC1810-A Air Compressor Airbrush

• One of the most comprehensive and versatile airbrush combo kits on the market
• Includes popular and easy to use Genesis.XT double action pistol style airbrush, 1/8 HP on-demand compressor, G-MAC(TM) and many accessories
• User can setup complete airbrush system from the box and be ready to go
• Wide range of applications: fine arts, automotive, food, makeup, hobby, textiles and murals
• 6 Year Limited Warranty on Airbrush and 1 Year Limited Warranty on Air Compressor

My iwata studio series finally bit the dust.... had enough to try this out so I went for it! I'm a professional artist and have sworn by iwata for years... after just experimenting with the XT for a few minutes I was blown away by how comfortable the pistol grip and dead accurate double action. The grex compressor isn't silent but it's not ear piercing loud either... steady flow of air and very little vibration... the quick connection is great and I bought 2 adapters for my iwata brushes and fit perfect... I was impressed by the design fit and function of all the grex products I received... I highly recommend grex to artists of all skill levels.

Save 24% Off

Fenix Remote Switch (TK12, TA20, TA21)

Works great, switches on the pad are a little finicky, the regular switch is great. It's very nice to have 2 different on/off switches with the remote. I'll see if it holds up but it's good for now.

This does work on my TK21 even though it isn't listed as being compatible. It has to be screwed in very tight, but it does work

I haven't yet used this in a "need to use" application. I have only been fiddling around with it so far. The tape switch seems pretty solid. The light activates whenever the tape is depressed. The switch is made from silicon and when depressed, has a solid click to it no matter where it is depressed. The cap also has a mechanical switch that overrides the tape switch when it is activated. I thought the coil was going to be saggy, but it stays coiled and keeps the length of the cable at a minimum. For the price, purchasing it was a no brainer. Although this may see some weapon applications, I am looking to also use it for bike applications. I am thinking about mounting it on the grips in the area where my fingertips naturally lie.

Buy Fenix Remote Switch (TK12, TA20, TA21) Now

I originally bought this for use with a Fenix flashlight mounted on my shotgun with the 5598 NEBO PROTEC Universal Long Gun Light Mount, and it works well for that. However, I stopped using this remote switch for a couple of reasons:

1) It should have come with some way to mount it. I recommend using 3M's Command tape, which grips well and releases cleanly.

2) This remote switch takes a firm press to activate, and I find that distracting.

3) Fenix flashlights already have a momentary-on feature to their tailcap switches. By mounting my Fenix light slightly off center, I am able to touch my light's tailcap when my hand is on properly positioned on the forend. This gives me both momentary and full-on light without having to worry about the cord getting in the way or not having depressed the switch firmly enough.

If you need a remote switch for your Fenix light, this works exactly as advertised.

Read Best Reviews of Fenix Remote Switch (TK12, TA20, TA21) Here

The switch does everything it should. I have it paired with a tk15. BUT finding a mount is much more difficult than with other switches.

Want Fenix Remote Switch (TK12, TA20, TA21) Discount?

Got this to go with my Fenix TA21 Level 225 Lumen Tactical LED Flashlight.

I wasn't expecting there to be an on / off switch on the tail cap replacement as well as the momentary activation pad.

I'll add a few pics of the cord and light mounted on my M4 real fast for a visual aid.

5/5 Got what I ordered.

-Mike

Save 24% Off

The Source OA-TANKBT Protective Tank Boot for 10 lb. The Source High Performance Portable Air System

• Extra Protection
• Fits 10 lb. Cylinders
• Heavy Duty Resin
• Comes in Black
• Non Skid Bottom

I like the product it works good, but there is a couple of issues with the product, first it didn't fit the tank I purchased it for, as much as I tried I could not get the tank to fit in the boot, it was about a 1/4 of an inch too small,finally I took an industrial heat gun and heated up the 'boot' untill it got pliable then it would go over the tank, I doubt I will ever be able to get it off as I'm sure when it cooled down it contracted to it's normal size, but that's OK it's on there now so no need for it to come off. Second the points on the top keep the tank fitting flush against the holding bracket so I couldn't secure it with the locking handle, so I had to take a Dremmel to it and grind the points off so it would be a 'circle not a hexagon then it would fit flush up against the holding bracket so I could use the locking handle to keep the tank upright, all in all I'm satisfied with the product but these two issues were a challenge.

Makita AC310H 2.5HP High-Pressure Air Compressor

• Makita high pressure compressor technology delivers 400 PSI capacity for the next generation of high pressure nailers.
• Dual capacity: two universal couplers for conventional nailers (3.6 CFM at 90 PSI) and two couplers for high pressure nailers (2.7 CFM at 300 PSI).
• Low amp draw reduces incidences of tripped breakers and voltage drop during start-ups.
• Efficient dual-head (2 stage) pump provides faster recovery time and improved performance.
• 1,720 RPM enables greater displacement at lower RPM and lower noise.

First I want to say that Amazon was stellar to work with in every regard. The compressor arrived incredibly quickly, as promised, and customer support was very focused in their attention to customer satisfaction and follow through.

As to Makita, my first impression was the cheap and poor job in their packaging of this heavy and comparatively expensive item. I was surprised at their indifference and lack of care in protecting their product. It displayed a definite lack of pride.

I attempted extensive research before purchasing this compressor but Makita's poorly drafted owner's manual, available online information and Makita's technical support left a lot to be desired. This compressor was not available locally so it was also not possible to evaluate one firsthand.

The options for a 400 PSI high-pressure portable compressor are few, so I decided to go with the Makita AC310H, relying on the fact that Makita is a well established company with a past reputation for decent quality power tools.

Regarding the design of the compressor, it appears that those responsible for its conception seem to have actually cared about their work, unfortunately however, they obviously were not able to oversee the production, quality control and packaging of it.

The initial appearance was actually impressive, but on closer inspection the lack of care in assembly is evident, from oversized wrenches rounding the corners, to some low quality components incorporated, to the failure of properly assembling the high-pressure regulator, to the unexplainable gouging and scratching on the bottom of the air tank.

Upon switching the compressor on it immediately failed to build higher pressures because of the aforementioned regulator. It was impossible to get to the regulator without disassembly of components so further reviewing could not be concluded. It was expeditiously returned into the confines of it's cheap cardboard box and was summarily sent packing. Kind of a shame as it really wasn't its fault.

It seems to me that the bean counters took a good design and then farmed it out to the lowest common manufacturing denominators in China with the sole intent of maximizing corporate profits, hence increasing their bonuses at the expense of their customers.

The Makita name on something now leaves me with an one star impression, and this buyer will be bypassing it in future tool prospects.

Buy Makita AC310H 2.5HP High-Pressure Air Compressor Now

Cheap regulator for such an expensive compressor. The high pressure regulator failed during testing the compressor for the first time out of the box. I received a new regulator under warrantee. I disassembled the old regulator to find out what happened. The threaded shaft for adjusting the pressure is made of steel with very fine thread. The nut that it runs through is made of soft brass. The threads in the brass are striped clean through. Because of the inferior materials used I can foresee this happening again and again.

Read Best Reviews of Makita AC310H 2.5HP High-Pressure Air Compressor Here

I bought this air compressor hoping to replace a makita MAC2400 that I had. I did not have a specific use for the high pressure system, but I liked the idea of high pressure for the future. I dont believe this compressor makes air as fast as my old one. If they had two hot dog tanks on it, I think it would be and awesome machine. But it doesn't catch up on air vary fast. It does run quiet and doesn't draw a lot of power. I think I will go back to my old compressor for my next purchase.

Want Makita AC310H 2.5HP High-Pressure Air Compressor Discount?

Makita AC310H 2.5HP High-Pressure Air CompressorMakita AC310H 2.5HP High-Pressure Air CompressorThe Makita AC310H 2.5HP High-Pressure Air Compressor I bought it from Amazon.com, it failed right out of the box, just like the rest of the reviews said, it leaked everywhere, never built pressure to 400, ran constantly, only got to 300 psi, the HP guns shoot at 320. It leaked when running from the head area, but when off no leaks, it's a failure of design passed off to USA. The Max high pressure, the compressors work well, light too, when the $1,400.00 to 1,500.00 item quits you'll not find a repairman or customer service, around, My 2 came back after a year in parts in a box saying a new one was cheaper than fixing either of the two (2) so $1,500.00 throw away compressors, get used to it. I'll be selling all six guns, but with a conscience, should I cheat someone? Or should I take my pleasure out with a sledge hammer, or a hood ornament for an Eitsil (Fords failure)It was pretty cost effective when using the concrete nailer less than half the cost of the Hilti, ramset, but factoring in the throw away compressor cost, and time dealing with a non-repairable item, as the Makita too. Buyer Beware run, don't walk, away from these items, it's a puzzle designed to beat you. The Makita AC310H 2.5HP High-Pressure Air Compressor is a hood Ornament for a junker. Amazon should not push this item, it's disappointing at least.

Save 47% Off

I'm a GC, and I bought the makita HP compressor & framing nailer two years ago. At the time there were no reviews here, and only a brief write up on some tool review website. I bought it because Im a bit of a tool junkie, and getting a new toy makes framing walls seem like more fun. Anyway, I figured I'd throw in my brief thoughts after reading all the negative reviews.

Mine works great, I love how quiet it is, how quiet the gun is, and oddly enough I love the makita hose more than anything else.

The gun is crazy light. Use it for a week then pick up a regular coil framing gun full of 3" spikes. This could be an exaggeration but it feels 5lbs lighter.

The compressor however is NOT crazy light. It's all motor, which I suspect is made of some tungsten lead super alloy. I move it around at night or other lowlight conditions, so nobody sees me struggling to tote this small compressor.

Full disclosureI've probably used this thing a total of 80 hrs. It's too nice for my guys to mangle, so it's locked up in my private tool section where the gremlins can't get to it.

All in all, it's a novelty to me. It's cool, looks sweet and is fun to use. I've never used it for anything that a regular gun and compressor couldn't have done. If you've got money to "waste" maybe you'll like it too.

Interstate Pneumatics G2024-030V 2 -1/2 Inch 30 PSI - 1/4 Inch NPT HG Vacuum Pressure Gauge

• Dial Diameter: 2-1/2"
• Vaccum Inches Hg: 0-30
• Inlet Thread: 1/4" NPT

Very nice little meter. Worked fine when I built my vacuum chamber. shipping was fast. What else can I say when I got exactly what I expected?

Buy Interstate Pneumatics G2024-030V 2 -1/2 Inch 30 PSI - 1/4 Inch NPT HG Vacuum Pressure Gauge Now

Unable to locate a glycerin filled guage but this guage serves the purpose at an economical price.Easy to read dial.

PRO 1/2" AIR CONTROL UNIT REGULATOR LUBRICATOR FILTER

I purchased this unit to replace a Regulator that had no filter or lubricator. It works nicely and the filter dumps any moisture collected at shutoff. The reason I gave this unit 4 stars instead of 5 is the o-ring on the oiler cannister. It requires several attempts to seat it correctly, each time requiring purging of my small shop system and refilling with pressurized air to test for leaks. It seems that the o-ring is just the right size without stretching and tends to slip out of its groove in the cannister when installing even using a little oil as lube to slip it into place. The fourth time was the charm though, and it's been holding well since then..