Devilbiss Long Life Air Inlet Filter-Filter,5/Pack

very cheap and useful. I live in Mexico, and here price is 100 times compared to this. Thanks a lot

Devilbiss quality and reliability are well-known and appreciated in health care products field.

I would always pay to get the best in this area.

Buy Devilbiss Long Life Air Inlet Filter-Filter,5/Pack Now

Campbell Hausfeld Easy Spray Paint Sprayer #HV2002

• Paint sprayer creates decorative and fine finishes
• Covers 100 square feet with 1-quart metal canister
• Metal air flow adjustment changes pattern size from 1/4-to-6-inches
• Accessory kit includes cleaning brush, wrench, viscosity stick, 5 strainer cones, extra needle/nozzle for light materials
• 1-year limited warranty

I bought this sprayer 3 years and 1 month ago (with a 3 year warranty) and ironically enough it overheated on me and is now in the trash. I was meticulous about cleaning after use and routinely cleaned the filter. I am a woodworker/cabinet maker and used the sprayer about every 3-4 months (not very often in my book). After contacting Campbell Hausfeld, they said there was nothing that they could do for me since I was 1 month out of warranty. In fact, they wouldn't even pay for shipping to their nearest service center. As the coversation progressed, I was subsequently informed that one cannot even buy parts for the turbine (no wonder they wouldn't help me out with shipping). Overall, I struggled with this sprayer every time I used it and I've never experienced such poor customer service. What a waste of 200 plus dollars! I'll never buy another Campbell Hausfeld product.

Buy Campbell Hausfeld Easy Spray Paint Sprayer #HV2002 Now

I did a bit of research before buying this sprayer. I have used a high pressure system in the past and absolutely love this sprayer! It is easy to use and clean. I saved my customer over $300 in labor by using this product to spray water based polyurethane and paint on cabinet doors and closet doors! Should have bought one of these years ago!

Hitachi 23 NP35A Gauge Micro Pin Nailer

• Large fastener capacity for fewer reloads and less downtime
• Dual trigger for safe and accurate placement of fasteners
• Rear exhaust directs oil and debris away from the work surface
• Reload Indicator for easy visual recognition of low nail quantities to avoid dry firing
• Depth adjustment for flush drives into a variety of surfaces
• Comes with a 5-year limited warranty

I usually don't write reviews of a tool until I've used it quite a bit, but I'm going to make an exception in this case because there is only one other review. I would like to thank Jim, the first reviewer, as his comments inspired me to take the plunge and try this product.

This Hitachi NP35A is my first micro pinner, although I do own and use a few larger pneumatic tools (15 gauge nailer, 18 gauge nailer, 2 staplers). I typically prefer to use screws rather than nails, but there are occasions when the unique attributes of a power driver nail outweighs it's many disadvantages.

Here are my first impressions of the Hitachi NP35A 23 Gauge Nailer.

Pros:

o compact, lightweight, and comfortable to hold.

o high quality product, for example magazine slides in and out with smooth precision.

o trigger is comfortable, double trigger is relatively easy to get used to.

o the soft nose tip leaves no mark whatsoever on even soft woods.

o very quiet, pleasant to use (no hearing protection needed with this little guy).

o easy side loading of pins, and automatically adjusts to different pin sizes.

o using the soft tip, appropriate air pressure, and good technique, pins are driven to a perfect depth just below the surface (the depth is adjustable via the use of a hex wrench on the nose piece).

o surprising nice blow molded plastic case.

o an easy to see bright orange "low pin indicator" (of course, it doesn't work if one is not paying attention and doesn't look at it ... just one of my many faults I'm afraid....)

o although the minimum specified pin length is 5/8", I was able to use the 3/8" pins without a problem (this is quite a good thing, for my projects).

o made in Taiwan (often a significant step up in quality compared to China made goods).

Cons:

o the manual has a few typos (e.g. "all crews must be tightened..."), and it is bloated with the usual tedious and uninformative safety stuff (dictated by lawyers, presumably), but really, you can probably see that I'm nit-picking here.

Notes:

I have tested this product primarily with Western Fir (actually harder than many "hard woods"), and a sample piece of 100 year old clear white oak (recovered from a badly broken desk). As long as one presses the tip firmly to the wood all pins are driven flush, although one does have to crank up the air pressure a bit for longer pins and harder wood.

I used Grex 23 gauge pins (since they come in a convenient multi-size package, available here on amazon for about ten dollars).

The longest pin length I tried was 1". This gun is specified to be able to handle 1-3/8, and I do not doubt that it will, but for now I can't see myself needing or wanting to drive these incredibly tiny, thin little needles into anything that would require longer lengths. However I know that many people do use much longer pins. Perhaps as I become more comfortable and experienced with this tool I too will join the super-sized crowd.

As you probably know, these pins are much smaller than 18 gauge brads, and much less noticeable. However, they are not invisible, especially in lighter woods. Nonetheless, they are much less visually distracting than their 18 gauge cousins. Also, if you build small things (say drawer inserts using 3/16" thick dividers) an 18 gauge brad is simply too big it would split the wood whereas a 23 gauge pin works very nicely (along with a bit of glue).

Hope this information is helpful to you.

Buy Hitachi 23 NP35A Gauge Micro Pin Nailer Now

Had purchased a pin nailer from HF about 7 months ago and now finishing up a trim job on kitchen cabinets it decided to quit accepting 1 inch pin nails. Ran a search on Amazon and found this one. I have 2 other Hitachi nailers, so I ordered this for overnite delivery (Amazon Prime). Used it today and absolutely no problems. Its light, accurate and the nose pad protects the work piece. You do have to adjust the depth when using the nose pad. Adjustment is quick and easy. Hitachi makes some questionable quality items, but I have found their nail guns to be of a high caliber. If you need a high quality pin nailer, this is it.

11/4/2010

UPDATE:I guess I spoke too soon !! All of a sudden it started to jam. Tried various manufacturers pin nails and they all jam frequently. A real shame!! Gonna have to return it.

Read Best Reviews of Hitachi 23 NP35A Gauge Micro Pin Nailer Here

I bought this gun when my 5 year old Porter Cable gun gave up. What this gun does that the PC didn't is shoot 1 3/8" nails and set them below the surface in hardwoods. The PC was/is a good gun, but I feel this gun is better. It shoots bigger nails and costs less. As long as I get at the least the same amount of use from it as my PC, I'll be a happy woodworker.

Want Hitachi 23 NP35A Gauge Micro Pin Nailer Discount?

This little gun is awesome to use. It is well designed, fits in your hand well, is quiet and comes with tool oil, glasses, and 2 tips!! This gun is very easy to use. I have no complaints with it. I have other Hitachi tools and find their quality to be top notch. It is amazing that nails this skinny could be used without the nails bending, but it works without failure. The nails are so small that the holes are unnoticeable, and the 2 included tips are awesome. I can't imagine using a gun like this on your fine projects without using a tip. Others are more expensive, but this little wonder does the trick. Buy this gun, you will be very impressed and satisfied, like me.

Save 50% Off

I was so glad to get my micro pin nailer in the mail. It did let me down however. This nailer would consistently drive the nail too shallow despite trying to adjust the depth. I had to take off several moldings and trim pieces due to the remaining nails sticking out about 1/4 of an inch. I do not think this device was made to drive nails in that are greater than 1 inch despite what the manufacturers details may tell you. The product is made to drive fasteners up to 1 and 3/8" but in my experience this was not the case. I will return the product and save my money for the Grex micro pinner.

Hitachi 19412FA 1/4-Inch by 50-Feet Polyurethane Air Hose with Automotive Plug and Coupler

• Max 300 psi
• Oil & Abrasion Resistant
• Very Flexible in Extreme weather conditions
• Industrial Strength
• Professional grade white polyurethane air hose with 50-foot length and a 1/4-inch NPT thread
• Can be used with pressures at or below 300-PSI and it has a 3-to-1 burst ratio
• Comes with a 30-day limited warranty
• Designed with a crimped-on compression ring and screw-on quick connectors
• Highly kink resistant preventing project interruption

I have a small compressor, and a number of nail guns: framing, trim, brad, and stapler. I found that I wasn't using the air tools all that much because I didn't feel like fighting with the #$&#ing vinyl hose. By the time I had uncoiled it, fought with the tangles, the damage it did to anything in the work area, and then putting it away...if it was only a "few" nails, I just got out the hammer.

I tried a number of hose/reel combinations, but none of them lived up to expectations. Either the hose didn't quite fit in the reel, it leaked, or reeling the hose in was still a chore.

Finally I tried this hose. I had seen it at Lowe's for a while, but always assumed that it would either not deliver enough air, or leak after a week.

I was very pleasantly surprised. The hose delivers more than enough air, although I only use one tool at a time, and at "homeowner" rates of fire. I assume it would work fine in more strenuous use. As other reviewers have mentioned, it doesn't get caught or stick to corners like the vinyl. You can move the hose around with one hand, and it doesn't knock over anything that isn't bolted to the floor. No signs of leaks, cracks, etc. Even better, it can be coiled around the compressor, meaning it no longer takes a second trip to haul the hose, compressor and nailgun from the barn.

Not sure how it would hold up to professional, daily use, but for weekend warriors like me, it is a godsend. I find myself using my air tools a lot more since the hose now can be used and put away in seconds. Anyone want to buy 50' of barely used vinyl hose?

Buy Hitachi 19412FA 1/4-Inch by 50-Feet Polyurethane Air Hose with Automotive Plug and Coupler Now

This air hose is light-weight and easy to coil, with good quality NPT ends. However don't pay extra for this one with the male and female coupler attached. Reason they may not be the size that works with your compressor or tools. I removed them and replaced them with M style Milton set. The M style end would not seat in the female coupler. My advice just buy the hose.Hitachi 19412F 50-Foot-by-1/4-Inch Polyurethane Air Hose

Read Best Reviews of Hitachi 19412FA 1/4-Inch by 50-Feet Polyurethane Air Hose with Automotive Plug and Coupler Here

I wasn't sure if this 1/4 inch hose would work with a framing nailer. I bought it with a Hitachi NR90AE round head framing nailer and a Makita MAC 2400 2.5 hp, 4.2 gal compressor. I've only been using this setup for a month, but so far I'm very impressed. There is plenty of air flow for the nailer. The smooth finish tends to slide over boards and stuff without grabbing like some rubber hoses do. All in all, a great value.

Want Hitachi 19412FA 1/4-Inch by 50-Feet Polyurethane Air Hose with Automotive Plug and Coupler Discount?

I selected poly hose as opposed to vinyl because it does not keep trying to wind-up like vinyl does. I liked the "automotive" plug and coupler because different kind and types of couplers exist, and I wanted the hose to be compatible with my compressor and a stapler gun that I just purchased. Everything worked fine. I did not need to make an additional purchase.

The Hitachi air hoses are great simply put! As a cedar shingle siding contractor I use air hoses everyday at work at lengths between 50' and 150' feet and after years of using all kinds of air hoses, I'm happiest with these. I've used everything from the 1 year use disposable bright orange ones for $10 w/o fittings that are hard and rigid in mildly cold weather and impossible to coil and use smoothly, to expensive Goodyear rubber hoses. These are super-durable, come with fittings, always stay flexible in cold weather, coil up and unroll easily and another bonus if you're up on ladders and scaffolding all day using a nailer or stapler the light weight is a huge benefit. Heavy rubber hoses are something you notice after spending the day constantly hoisting you nail gun or stapler up. The only drawback at all is that the black rubber flex/kink protectors on either end aren't permanently attached to the ends of the hose and will slide off. Wrap a narrow piece or hockey or duct tape on them and they'll stay, but who cares? The hose are awesome, light, flexible and after a couple years, I have to have one fail.