BADBOY Blasters BB200D (125 LBS MEDIA CAPACITY) TORNADO SERIES SODA/ABRASIVE PRESSURE POT BLASTER

• DEAD MAN GUN FOR SAFE OPERATION W/4 NOZZLES
• BLASTING HOOD
• SOLID RUBBER WHEELS
• BUILT IN WATER TRAP
• 16 FT BLASTING HOSE

The blaster works great. A few practices that need to be followed with any blaster are clean dry media and dry air. The water trap included seems to work fine. A strainer or screen to make sure all the media is able to pass through the nozzle. I like the top that allows easy filling.

Cons: Only real complaints are the hard to understand assembly instructions, the hood which tends to fog up easily and the required O-ring in the nozzle which can be lost or misplaced when clearing a clog from the nozzle.

Air Blow Gun w/Safety Nozzle

I have installed two out of ten so far. They are definately cheaper than what I am used to, but that is what I paid for. When letting off of the triger, it takes a second for the air to stop. So far this is not a problem. So far it is worth the price I paid.

Wel-Bilt Air Needle Scaler - 5 CFM, 90 PSI

• Short barrel air hammer

The mere fact that this product exists is really the most helpful. I had to clean paint from old cast iron radiators. All the scroll work etc. took days and hours with our previous strategy of scrapers and dentil picks. This tool is great. However it starts to leak air after about 2 hours of continuous use and only works intermittently. That was kind of frustrating. I'd have gone with a better made scaler if I'd have known that. You have to give the tool a break for a couple of hours, then its back to normal operation. Really handy, Love the pistol grip for the job that I had. And even with the problems I had, it saved me days of work and did a very nice job.

Buy Wel-Bilt Air Needle Scaler - 5 CFM, 90 PSI Now

I was looking for a sandblaster when I read the reviews about this product. Like the previous reviewer, I had an old radiator to strip. I have stripped others with sandblasting, but had to build an enclosure to try and keep the surrounding area half way clean. Using the scaler, the job was faster and much cleaner. I was able to use a small Makita compressor, rather than a larger capacity unit. I did have to occassionally wait for the pressure to build, but this was a small price to pay for the convenience of using a more portable compressor. Unlike the previous reviewer, I had no trouble with the tool after hours of continuous use.

Read Best Reviews of Wel-Bilt Air Needle Scaler - 5 CFM, 90 PSI Here

I have tested this scaler but I have yet to put it to work on any large pieces. Looking forward to giving it it's first workout.

Manifold 3 Hose Air Brush Air Compressor Adaptor- Badger Airbrush

• Manifold with 3 hookups

I bought this manifold for my compressor. I could only run one airbrush off the compressor and I have like 5 or 6 of them. Okay, I only really use 2 but hey, I didn't want to be switching them out all the time. This little puppy is a tad expensive, but I'm loving it so far. The item was slightly different than the picture on-line with a straight connection into the old connection rather than the 90 degree bend shown. But this worked out well for me and made it easy to connect.

Now I've got two airbrushes hooked up and I can power them both. The valves make it easy to shut off unused ports or even unused brushes. I like having the ports all pointing in differing directions, it helps keep the airbrush hoses separated instead of tangled. I suppose you could stack these to add even more ports, but I'm happy with 3 for now.

I've got an Iwata and a Crescendo hooked up at the moment. Both connected just fine. If you don't need a gazillion ports, this is a pretty good connector.

ROLAIR 2 HP, 8.4 CFM@100 PS

Had very good luck with rolair before. Had a pancake that drowned, caught fire and still performed well for years. This has the power you are looking for and money well spent as I know this will probably out live me.

I have had many compressors and this is by far the best. Builds up fast and can run 4 framers at once or multple coil guns sheeting a floor or roof. only draw back is it is a 20 amp start so need to have a goood breaker.

Buy ROLAIR 2 HP, 8.4 CFM@100 PS Now