ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI

• Mounting bracket hole pattern: 4in. apart (width), 5in. apart (length)
• Heavy-duty rubber stop is adjustable for safe usage
• Four direction non-snag rollers reduce hose wear abrasion
• Mounts on wall, floor or ceiling
• Heavy-duty powder-coated steel constructed wheel

Northern Industrial Air Hose Reel With Hose 3/8in. x 50ft. Hose, Max. 250 PSI

I bought one of these hose reels because the price was so low. It was also to be used infrequently, making it harder to justify an expensive model. We have a Cox Reels auto-rewind air hose in our garage and a Reel Craft model in another location, but those professional-grade brands cost a whole lot more.

Pros:

The all-steel rewind mechanism works well and is sturdy. It's easy to find a lock point when unwinding the hose and just as easy to rewind all of the hose when you're done. There's plenty of room for 50' of 3/8" air hose.

The steel frame is strong. For example, the plate that attaches to the wall is nearly 1/4" thick.

The swivel mechanism where the air hose connects to the reel is brass.

Inexpensive.

Cons:

Throw a few coins into a large metal can and giggle it vigorously. That's the sound you'll hear from this reel when the hose unwinds or rewinds. (The noise comes from the rewind spring clanging on the inner and outer sheet metal spring-housing covers.) I put 1/8" thick stick-on foam on that cover, but the reel still sounds like it has loose parts.

After one year, the rubber hose broke apart, about 4" from the end. It didn't just leak, the end actually fell off. The ENTIRE hose had deep cracks over its entire length, so it was unrepairable. I replaced it with a genuine Good Year air hose. By contrast, the original air hose on our Cox Reel still looks fine after nearly 20 years.

Summary:

I should have bought a Cox Reel, Reel Craft, or other quality reel, rather than trying to save a few dollars with this brand.

Buy ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Now

I read the reviews before I bought mine. The 25 and 50 foot ones are the same just comes with different length hose (sorry to insult your intelligence). I use them on average 2-3 times a week, so not a whole lot of use and so far they are doing well. Can't complain. I just didn't have the $$ for a $300.00 one and I don't use it as often as a commercial shop. It arrived on time, no dents, missing parts, etc.

Read Best Reviews of ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Here

Worked Great for about 18 months ... until the hose gets hairline cracks in it and leaks (the entire length). Now I have to find a replacement hose, what a PITA.

Want ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Discount?

This reel works well and as it says it's supposed to. I use it lightly because it's just in my home garage. This reel is not heavy duty and you can tell it wouldn't last long in an industrial shop. For home use this is exactly what I was looking for. My dad has a much stronger commercial hose reel and the spring action is much stronger on his but for the price, this does the job well. Yes, the host on this seems cheap and I don't think it will last the life of the reel but.... it's not that expensive of a reel! You get what you pay for... if you want the best, this isn't it... if you want to get the job done and are not using it daily, this is a great choice!

Porter-Cable CFFN250N 16-Gauge Finish Nailer 18-Gauge Brad Nailer Compressor Combo Kit

This kit is my first exposure to air tools, so this review is aimed at fellow novices. Here's some information that's not included in the Amazon.com product description or the product manuals.

There's no manual for the combo kit. There is a manual for the air compressor and for each of the two included nailers. The serial number for the compressor is what you'll use when you register the kit, which you can do either by mail or at Porter-Cable's web site.

The air compressor has a standard 120V 3-prong grounded power cord. Many larger compressors use a non-standard 3-phase cord in either 120V or 240V. But you'll need a full 15A circuit, so find one that's got no other devices drawing current, or a lightly-loaded 20A circuit.

The compressor's drain valve isn't as depicted in the manual. The manual shows an extension "T" handle. The drain valve on my compressor is just a knurled brass barrel. Turn it counterclockwise by hand to open it.

Included with the compressor are a 25' hose, a male 1/4" quick connector end, a female (brass) quick connector end, and a spool of Teflon plumber's tape. There are no extra parts; you'll need all of these to get started. Wrap a couple of turns of Teflon tape around the threads and screw the female quick connector end on one extreme of the hose, and the male quick connector end at the other extreme. There's no instruction about how much pressure you need; I used a 6" crescent wrench on the connector and held the hose by hand. (That seemed to work fine, as I didn't damage anything or have any air leaks when I hooked it up.) Insert the male quick connector end of the assembled hose into the female quick connector on the air compressor. You'll need to pull back the barrel of the female quick connector to make the connection. Repeat on the other end, inserting the male quick connector end that's already attached on the nailer into the female quick connector end you attached to the hose.

Each of the two nailers includes a box of 1000 nails. These are of middling size (2") for the finish nailer and maximum size (1 1/4") for the brad nailer. Both nailers include 1/4" male quick connectors (attached) but their manuals mention that you'll get better performance with 3/8" connectors (not included). The connectors come with dust covers to keep them clean when not attached to your hose. The safety features work well, requiring you to depress the safety shoe against the nailing surface before the nailer will fire. The nailers also won't fire when there's inadequate air pressure; with the small compressor included you may need to wait a few seconds after firing a dozen nails in quick succession.

Each nailer comes with a "single sequential actuation" trigger; you can also get a "contact activation" trigger, at no additional charge, by calling Porter-Cable's toll-free (in the U.S. and Canada) phone number and reading the serial numbers off your nailers. Estimate 10 days for the alternate triggers to arrive.

The two nailers worked just fine for me right out of the box. The nails seated to just the right depth without any fiddling when the nailer was held perpendicular to the softwood I was working with. They're quieter than I was expecting, too -just a quick hiss when wearing good hearing protection.

I found the compressor to be shockingly loud compared to the deep rumblings of larger compressors. I went to the other end of the house to get away from the noise during the REQUIRED 15-minute compressor break-in cycle. Even wearing hearing protection when using the finish nailer (as instructed by the nailer manual; eye protection is a must, too) I was startled when the compressor started up. This is a SMALL compressor. It has a maximum 135 PSI pressure, which is enough for most any air tool. But the flow rate is below that required by many tools: only 2.6 CFM at 90 PSI. It's enough for the nailers but you'll need to upgrade if you want to expand your air tool collection beyond these nailers. On the plus side, there's no maintenance required other than to open the drain valve when you're done with the compressor.

Summary: Very good nailers, and an adequate compressor to run these nailers. A really good starter set if you want to spiff up the trim in your house. Just be mindful that the compressor is going to be the limiting factor if your air tool aspirations grow.

This combo nail gun/air compressor set is a great product combination and wonderful value. I really like it. Each nail gun comes complete with a sturdy plastic carry case, a supply of nails, and tool oil. Everything comes pretty much ready to use. Just break in the air compressor (which only takes 15 minutes) and you are ready to go. The air compressor moves around from vibration when it starts up I had to put it on a rubber mat to keep it from scooting along my basement floor. It probably wouldn't be a problem on a job site where the floor is not so smooth. The guns load easily. I used the finish nailer to build a display rack for my wife and had no mis-fires or jams using Porter-Cable nails. (I bought the B & C nails that Amazon advertised for these guns, but after later reading the negative reviews about them, I have been reluctant to use them don't waste your money on them like I did you can buy Porter-Cable nails at local big name home centers, which are not all that expensive).

This is a great value and well worth the money spent. However, UPS handling has gotten so bad with heavier items that you will be taking a chance by buying it online.

Buy Porter-Cable CFFN250N 16-Gauge Finish Nailer 18-Gauge Brad Nailer Compressor Combo Kit Now

Porter-Cable has put together the ultimate trim package. I bought the brad nailer/compressor combo about 2 years ago, then bought the FN250 about a year later. I just finished trimming out my new house, and everything worked flawlessly. This package would have saved me about $80.

The compressor can easily support 2 guns running simultaneously without cycling constantly. Both guns have depth-of-drive wheels which are simple and accurate. And the fastener range (5/8 to 1-1/4 inch for the BN125, 3/4 to 2-1/2 inches for the FN250) should handle almost any job you have. For this price, you can't pass this up.

Read Best Reviews of Porter-Cable CFFN250N 16-Gauge Finish Nailer 18-Gauge Brad Nailer Compressor Combo Kit Here

It's hard to imagine how you'd get a better deal on a quality compressor and nailers. I bought this combo to do the trim and finish work on a significant addition to our house. I've since added a crown stapler, so I've been working the compressor pretty hard.

The positives:

Both nailers are top quality tools. If you read the woodworking mags, both the brad and the finish nailer are rated in the top 3 in all of the 3 tests I've read.

They do everthing as advertised. I especially appreciate the ability to very precisely place brads due to the rearward design of the safety foot. I've never jammed either nailer.

The compressor works and it's nice to have a small compressor that develops 135 PSI. Read the fine print carefully on other compressors and you see that many smaller units only go to 90 or 100 PSI.

The compressor is surprisingly fast for a small portable unit. It goes from 0 to 135 in just a few minutes. I can drive crown staples into subflooring at 100 PSI as fast as I can pull the trigger and I still can't staple fast enough to make the compressor run constantly. It's faster than I am.

Now a few minor complaints. As previously mentioned, the drain valve is in an awkward location in the back of the unit. Basically, I have to turn the compressor on it's head every time to find the stupid valve. Why not put it in front?

The biggest issue by far is this: The unit is loud. In a new additon job site where the room is sheetrocked, but with no carpet or other stuff to deaden the sound, it's uncomfortably loud. Even in a large room, after a while it bothers me. I will add that this is a common issue with oil-free compressors, but it is a problem still.

Finally, the real proof for me is longevity.

Update Feb 2008: I've had this a couple of years now, and it's still going strong. I've driven tens of thousands of nails, staples, and roofing nails. The compressor has basically outlasted all my expectations, this is a solid unit and deserves praise.

I would consider myself in the heavy home user category. I'm not a pro, but I think I use things like this more than the average homeowner because I did all the trim, finish, and flooring work in a 6 room addition. I'd recommend this combo set to anyone because after 2 years, it's still delivering.

Want Porter-Cable CFFN250N 16-Gauge Finish Nailer 18-Gauge Brad Nailer Compressor Combo Kit Discount?

Two friends and I just finished building a 1350 square foot cabin in the mountains. We used ONLY this combo set plus a framing nailer that one of my buddies already owned. We put down over 9,000 linear feet of pine tongue and groove v-joint and all pine flooring, using the finish nailer that came with the set for 99% of the work. We used over 21,000 nails and neither the nailer nor the compressor ever hiccupped a single time.

HIGHLY recomend.

Manchester Tank Vertical Air Receiver 60 Gallon 200 PSI w/ Base Ring & Top Plate

• 60 Gallon Capacity
• Includes Base Ring & Top Plate
• ASME Rated Tank
• Please call 800-658-3579 for higher PSI or Tank over 240 Gallons
• MAWP:200PSI

I pulled one star only due to the premium price of the unit and the shipping costs that were more than I really wanted to spend. I have a now two year old Emax 7.5 HP 80 Gallon 1PH Horizontal 2 Stage Stationary Air Compressor in a large garage behind my home, but I had been previously using a nice small portable unit I had purchased many years back from Grainger Inc. This old portable was going to be incorporated into the garage on my home due to the small footprint and excellent running characteristics after some remodeling.

As I was remodeling the garage at my home, I installed a 240 volt outlet for the 20 gallon compressor and plugged it in. It began running as nicely as ever, but something was wrong. I noticed a few drops of moisture had leaked onto the floor from the bottom of the tank and found air was leaking from a pinhole in the bottom of the horizontal tank. This unit was old, but it still looked nice new even. Lol, I remembered that the tank was not ASME rated, and was only good for a maximum of 150 PSI. I recalled being disappointed long ago when I noticed that tank wasn't one of the better ASME ones, but thought keeping it well drained and maintained would keep it going just fine evidently good care wasn't enough for the thinner metal of this OEM Speedair tank. Some years back the original single stage compressor had blown, and I had replaced it with a newer (and much better) three cylinder 2-stage model with correct dual A-belt pulleys. I never used it much after replacing the compressor, so it sat idle a lot and hadn't been used at all since I purchased the new Emax. Unknowingly and silently, the tank of the old Grainger model was rusting away from inside.

I had set the controls with the installation of the 2-stage compressor to cycle at 110/130 PSI on/off. Old enough to know what can happen trying to use a weakened pressure tank, I knew better than to attempt a repair. That bad tank was a real let down as I was ready to put that unit back in service and had already serviced it with fresh synthetic compressor oil, new air filters, new Goodyear hose and fittings, and had even polished it all up. Add that to my remembering having paid Grainger over $600 for the original portable compressor, $300 for the 2-stage replacement parts, and I figured I had well over $900 sunk from sight. Knowing what new two stage compressor units cost, and knowing the rest of my components were still in perfect shape, I started looking for a tank.

I thought I would find something around $200-$300. Uh yeah, I found those prices if I didn't mind dealing with someone operating a website from a house, or working a vacant warehouse street corner. It took a while, and more studying, but I finally decided to cough up the cash for this Manchester 60 gallon 200 PSI tank. I certainly didn't want anything that could be a problem of any kind.

This 60 gallon Manchester model (302412) has a 30-inch by 13 1/2 compressor top mounting plate which is more than the 24-inch by 10-inch top plate I needed for mounting my compressor, and the electric motor a nice thick one too. This size can also easily support larger compressors in the 5-7 horsepower range. I didn't want to weld the old top plate on after having to cut it off the old tank, although I could have bought a lower priced Manchester model without the top plate. I wanted this new tank to look as good as my old compressor and its electric motor with the controls and I wasn't about to "rig" up something that didn't look factory. The increased size will also produce more air flow for intermittent use than the old 20 gallon tank ever could also keeping heat down with less frequent motor starts. The overall improved cooling should also cut down cut down on moisture in the air lines with the compressed air supply staying cooler. Overall height is 52 1/16-inches, and my compressor setup will add another 13-inches. So, my assembled unit works out at only just over 5-feet.

It's not portable by any means, with a tank weight of 192 pounds, but this Manchester has sturdy legs and a bottom fitting that will accept an electronic purge valve to keep the water drained out without me physically doing it. Periodic motor, belt, and compressor service will be easier with the vertical tank height. Even the floor footprint is small at only 20-inches which is less than the old portable. It also has nice inspection ports and a good number of fittings in all the right places. But what sold me was the weight and the gauge of the tank. The rating is also 200 PSI @ 650 degrees Fahrenheit, where most other ASME tanks are rated at only 400 degrees Fahrenheit. Quality always comes with a price, but it offers a much longer service life and greater safety. I figure this tank will far outlast me, considering the old OEM unrated Speedair tank lasted well over some 30 years. That works for me! I just hope some family member appreciates it after I've shuffled on.

... In the meantime, the old internally rusted 20-gallon tank won't go to waste. I plan to make it into a nice barbecue grill/smoker. That should help settle my stomach after watching my cash taking a hike because of it. I'm already salivating.

I'll be adding more here later, as I am currently waiting for delivery from Amazon retailer PneumaticPlus. I just thought I would share some of the specs, my knowledge, and my story, for the interim.

Update 8/23/2012:

Wow, I really have to hand it to Amazon order processing and shipping from PneumaticPro with Roadway. I ordered on the 18th and I picked up my tank today (the 23rd) only five days later by truck freight, and 425 miles away from the Bedford, Indiana facility. Amazon had predicted delivery from the 27th to the 30th. Yes, home delivery is included in the shipping, but I would have had to wait until the following day and it was more convenient for me to just pick it up earlier at the terminal. The order processing went very quickly.

The tank arrived with metal band straps holding it securely to a very strong pallet. Everything was in excellent condition at my inspection. The inside of the tank was sealed with plastic caps at all openings, and the tank was spotless inside so I could easily apply an interior coating if wanted. With some very light sanding and some touching up of the gray exterior primer coat, I'll be able to quickly apply a perfect topcoat of my choosing to have a great looking tank under my compressor setup. The very sturdy top plate even has multiple long slots in it to accomodate most any electric motor combination and larger horsepower frames. All that there is left to do is drill the plate mount for the compressor. Actual assembly of the entire unit will be very quick and easy due to the well thought out placement of ports, port sizes, and the factory installed top plate. The only downside is the tank comes without any of the fittings meaning you will have to provide your own fittings with ratings of 200 PSI and greater. This ran me about an additional $100 to purchase those fittings new, as those I had from the smaller tank being replaced weren't large enough.

Fitting ports on the tank:

(1) 1/2" NPT bottom (tank drain)

(3) 3/4" NPT both sides and top

(1) 1/4" NPT front top (where I used the 2-1/2" Oil Filled Pressure Gauge SS/Br, 1/4" Center Back, 0-200psi)

(2) 2" NPT front and side inspection ports (I used this fitting Anvil Malleable Iron Pipe Fitting, Class 150, Square Head Plug, NPT Male, Galvanized Finish)

Note: The threads come lightly coated with a pipe joint compound. You should clean this off and use thread tape. Using thread tape will facilitate easier removal of a fitting if needed in the future. Using high pressure rated brass and schedule 80 brass for nipples will also help where their use is possible.

Manifold 3 Hose Air Brush Air Compressor Adaptor- Badger Airbrush

• Manifold with 3 hookups

I bought this manifold for my compressor. I could only run one airbrush off the compressor and I have like 5 or 6 of them. Okay, I only really use 2 but hey, I didn't want to be switching them out all the time. This little puppy is a tad expensive, but I'm loving it so far. The item was slightly different than the picture on-line with a straight connection into the old connection rather than the 90 degree bend shown. But this worked out well for me and made it easy to connect.

Now I've got two airbrushes hooked up and I can power them both. The valves make it easy to shut off unused ports or even unused brushes. I like having the ports all pointing in differing directions, it helps keep the airbrush hoses separated instead of tangled. I suppose you could stack these to add even more ports, but I'm happy with 3 for now.

I've got an Iwata and a Crescendo hooked up at the moment. Both connected just fine. If you don't need a gazillion ports, this is a pretty good connector.

Craftsman 9-16391 Air Compressor Accessory Kit with Storage Pouch, 11-Piece

• Specially designed for use with all Craftsman and most other air compressors
• Reusable storage pouch blow gun safety nozzle extension tube rubber tip nozzle
• Quick connect coupler 2 quick connect studs
• Inflation needle tapered nozzle tire inflator
• Blow gun adapter

I use this air nozzle all the time for many applications. My favorite is to use it with my compressor to spray out computers and clean out the dust that always seems to gather inside the case. I hate those little expensive cans of air that they sell to blow out electronics. They are a waste of money and don't have enough air or pressure to get the job done. I use this tool and I make sure to hold the fan blades still so I don't over speed them and damage them. You can clean out a computer in under a minute.

I also use this to sweep the garage floor, dry off parts I have cleaned and just general purpose cleaning on many items in my garage. If you own a fairly good size compressor then you need one of these. They are very useful!

Buy Craftsman 9-16391 Air Compressor Accessory Kit with Storage Pouch, 11-Piece Now

Ok.., I should of looked more closely at the picture of the pieces, but the NUMBER 1 thing people are looking for in a Air compressor accessory kit is a TIRE CHUCK. The blow gun is nice and the needle useful for basketballs/footballs...but what these other things are for I havent a clue and 90% of people out there have no use for. I had to run to Menards to get a Tire chuck as soon as it arrived.......!

Read Best Reviews of Craftsman 9-16391 Air Compressor Accessory Kit with Storage Pouch, 11-Piece Here

I ordered one of these to use with my compressor. I only needed to use the air gun but figured that it was worth having the other accessories. Upon receiving the package I noticed that the quick coupler didn't work. I contacted Amazon for a replacement. When I received the replacement it also had the same problem as the first item. It seems that there is no quality control with regards to this particular item. I ended up going to my local home depot and purchasing the exact pieces that I needed.