Campbell Hausfeld RP071000AV 12-Volt Safety Inflator

• Compact design for storage in car
• Easily plugs into 12-Volt outlet
• Built-in flashlight for safety
• Keep your car tires inflate properly
• Includes accessories

I used this pump to fill my low SUV tire. I left it on for about ten minutes because it is slow and VERY noisy. It did the job but then my car wouldn't start. My battery was out for a while. The box that this product comes in is too snug so you can't store it properly and neatly. I guess for the price it's ok, just be careful not to let it run for too long. I learned the hard way. Also, the quality of the product isn't sturdy because half of plug tip just came apart after the third use.

Buy Campbell Hausfeld RP071000AV 12-Volt Safety Inflator Now

The reason I bought this is that I want to have an inflator on board for emergencies. The other day while on a trip I had to change a tire and put the donut on. The way this thing is mounted underneath my car does not allow to check/adjust the pressure w/o taking it down. As a consequence the pressure was way too low when I actually needed it. Luckily there was a gas station less than 2 miles away so I could bring up the pressure in the donut. Had it been a longer distance I might have needed a replacement for the donut in order to be able to get home. Anyway, now you know why I was looking for this device. I have no experience with any other inflator but this is what I think after having received it and used it once to adjust the pressure on both our cars. The light is not very bright and can only be used without the compressor running at the same time. This should be ok as you only need it to make the connection. It will not help you to read the pressure gauge in the dark anyway due to its position compared to the gauge. I was amazed how fast it brought up the pressure by 4psi on my Honda Pilot. The issue I have with this inflator is that the valve connector almost gets stuck to the valve stem and needs to be ripped off. I can imagine that this could create a problem in the long run to both your valve and the connector on the inflator. So, I will not use it on a regular basis but carry it with me in my car for an emergency which it appears to be perfect for especially when you consider the price.

In-Line Air Flow Regulator 1/4In F x 1/4 In M NPT w/ Gage

• 1/4fx1/4m inln regulator
• To regulate air pressure to air tools from full flow to complete shut-off
• Use as shut-off valve for air and noncorrosive liquids
• 1/4" Female NPT x 1/4" Male NPT.

This unit is well made and the pressure gage is pretty accurate. Using this with compressor to winterize Motor home plumbing; does this job well. Easily attached air hose fittings. Surface mail shipping, however, was very slow.

Save 8% Off

Ingersoll Rand R37231-600-VS 300 PSI MAX 3/8-Inch Regulator, Black

• 3/8-Inch NPT
• 0-140 PSI Pressure Range
• Flush-mount Gauge
• Relieving - standard knob control
• 113 CFM

Got this in and installed it but the first time I turned on my compressor it leaked like a sieve I tried everything but it leaked unless it was all the way up to full pressure. If I backed it off even a touch it started leaking. Was really surprised and disappointed as I've had good luck with other IR products in the past. Returned the regulator and got my money back.

Buy Ingersoll Rand R37231-600-VS 300 PSI MAX 3/8-Inch Regulator, Black Now

worked well, would order it again, very good price, fast shipping, easy to install and to set. Used for 2 weeks now and is working great.

Porter-Cable PCC583B 18-Volt Inflator (Tool Only, No Battery)

• Runs off an 18V Porter-Cable NiCad or Lithium-Ion Battery or your vehicle's 12V power adapter
• High pressure inflation for vehicle tires, bike tires, footballs or basketballs
• High volume inflation for recreational equipemnt like air matresses, rafts and pool toys
• Can be used for deflation using the high volume deflation connection making storing items away easier and quicker
• Automatic shut of feature shuts inflator off when required pressure is reached (needs to be set)

This is a great compressor. I need something I can use to air up my tires after airing down to go off-roading. It only took 5minutes to fill up my 31"x10.5" BFGoodrich all terrain tires from 22PSI to 37PSI. 5 minutes for 15 PSI means it will only take me 20 minutes to fill up all 4 tires after a day of off-roading. Since you can set the pump to shut off when the tire reaches a designated PSI you don't have to sit or squat by the compressor to keep an eye on the PSI, you can just set it and let it work until the jobs is done. When filling up the gauge will jump up and down by .5PSI, don't worry that's normal, it just means that the PSI is below X0.0 and above .5. The compressor is also quiet, it does not vibrate allot, and everything you need for it is on the unit itself.

Buy Porter-Cable PCC583B 18-Volt Inflator (Tool Only, No Battery) Now

This inflater is fast to air the tire. I previously have some 20 some bulks 12v inflaters, and they all took too much time to air the tire around 35 psi. This one is much quicker, and I think that it is almost as fast as the one in gas station.

The build quality is also better than other inflaters I used. The valve part is all mental, and this is the part that cheaper inflaters use plastic.

It is coming with needle to air sport balls.

It is also coming with accessories to air the air mattress or something alike.

I have porter cable 18v tools already, so the battery opreation brings lots of convinience. If you do not have porter cable batteries. Do not buy charger and battery alone, buy some porter cable tool set instead. You will find some tool sets are cheaper than you buy charger and battery indivdually. Research and caculating, and you will undertand what I mean.

Read Best Reviews of Porter-Cable PCC583B 18-Volt Inflator (Tool Only, No Battery) Here

Bought this item to inflate tires, water toys, boat fenders and in inflatable boat. Has done what I asked of it quite well. Good features include the easy conversion from high pressure to high flow because there are two separate hoses included and the ability to preset a desired pressure where the unit quits. I do wish it had a 110 volt option. I did not buy the battery pack or charger, but I do plan to decide if I need this portability later. The $40 purchase price is very reasonable, but the battery and charger add at least another $100 dollars unless you already have another PC tool with an 18 volt battery pack!

Want Porter-Cable PCC583B 18-Volt Inflator (Tool Only, No Battery) Discount?

I really like the feature that lets you set the pump for the pressure you want then just turn it on and it stops automatically when it reaches the desired setting. This makes it very convenient for keeping the tires on my suv at the right pressure for optimum performance.

Keep in mind the the battery and charger are sold separately. In my case this isn't an issue because a few years ago I decided to standardize on the 18 volt Porter Cable tools so I already have three chargers and half a dozen batteries that came with other tools.

Save 43% Off

This is an impressive little unit. I bought it mainly for my Bicycle shop and it works GREAT for inflating hi pressure road bike tires in a flash. I also tried it on my Nissan Titan and with an 18V NiCad battery for operation I was able to inflate from 30psi to 40psi in about 1.5 2 min.not too shabby. The digital pressure gauge is pretty acurate as well, but keep in ming if you use the auto off feature, then the tire will likely be about 2psi short after inflation is completed. You can attempt to compensate by setting the cutoff limit a bit higher or you can inflate manually ofter th e cutoff, whichn is what I do.

am very happy with this and allmy Porter Cable 18V purchases. For a homeowner/hobbyist, you cant go wrong. If I were using my tools 8-12 hrs/day like many contractors, I may have looked for something a bit smaller, but I do know contractors who use PC tools day in and day out. They are really nice for the price.

Klimaire 12,000 Btu 20 SEER, Energy Star, Ductless Mini Split Inverter Air Conditioner & Heat Pump,

We just had this unit installed last wednesday. Yesterday we noticed the unit was not heating. We called the installer and he determined that the condensor line was leaking and that we needed a new outdoor unit. We have to pay shipping on the unit for Heat and Cool on an item that is brand spanking new, plus will have to pay to have the new unit installed. This is so wrong. It is obvious that customer satisfaction is not a priority with this company. I would not recommend anyone buying any product from them if you can help it.

Update, Heat and cool paid for shipping both ways and 3 weeks ago replaced at no charge the controller board which was fried by lightning. Increasing rating to 4 stars.

We purchased five units some five years ago, in our new house. They were installed professionally. Saved a ton of money over conventional air conditioning. We love the concept, and at first the units all workd fine. Quiet, cool, etc. We also saved money by heatine or cooling only the rooms we use. (Why cool a spare bedroom 24/7?) Zone cooling at its easiest. Energy efficient.

But getting service has been a nightmare, and three of units today are not functional Warranty? Don't make me laugh. A new compressor will cost just about what a new unit will cost, and shipping by pallet is so expensive (that's the only way, they say) that it's cheaper to toss the entire unit and buy a new one.

We'll buy new ones, alright, but not from this company.

Buy Klimaire 12,000 Btu 20 SEER, Energy Star, Ductless Mini Split Inverter Air Conditioner & Heat Pump, Now

the install was pretty staight forward. It took me about 2 weeks of an hour here and there after work to get everything done. I LOVE the unit, it is quiet and cool. People always ask about it and its easy on the electricity bill. Dont make the mistake I made and move the condenser lines after the freon is in circulation. The nuts that hold the lines together can loosen, and the the freon will escape into the ether. Then, you will have to call your AC person to come take your money.

Read Best Reviews of Klimaire 12,000 Btu 20 SEER, Energy Star, Ductless Mini Split Inverter Air Conditioner & Heat Pump, Here

I have a 9k btu klimaire mini-split working fine. Two pieces of advice: When assembling use Nylog Blue assembly sealant at all metal to metal connections..works great. 2-If using cheap vacuum pump heat up the evaporator coils with a hair blow dryer;makes up for the poor pump capacity.

Want Klimaire 12,000 Btu 20 SEER, Energy Star, Ductless Mini Split Inverter Air Conditioner & Heat Pump, Discount?

While not the exact model listed above, I did purchase 3 separate units of various sizes. All have heat cooled as expected for over 2 years now. Be sure and don't lose the remote control...was fairly expensive to replace. I ended up just using 2 remotes to cover the 3 units. I did all the drilling & setup work and then had a retired HVAC person help me with the connections and vacuum. Otherwise, you should call a professional installer. I'm unsure about quality of support because I've never needed to contact anyone. However, these were so much cheaper than any other alternative at the time, I would come out ahead to just purchase a replacement unit versus going with some other brand that claims better warranty/support services.

Save 17% Off