New Square D Thermal Overload Heater Element Unit B40 or B-40

• Brand New Square D Thermal Overload Heater Element B-40 / B40
• FREE SHIPPING
• Amp Rating 21.8 - 24.2 AMPS

You get exactly what you want. A square D motor heater! Cheaper than local supply shops. I used in a NEMA 1 Manual starter for an air compressor on single phase electricity.

Save 55% Off

Compressor Copeland CRN5-0500-TFD-970 380/440, 460, 3, 50/60

Found the lowest price for this OEM direct replacement compressor on Amazon. This is 380/440/460 Volt at 50/60 Hz. I was shocked to see it in stock on Amazon!

New Paint Sprayer Paint Zoom PZ-001 Paint Sprayer with 3-Way Spray head

• Simple one-touch operation cuts your time and paint cost in half
• Advanced spray technology delivers superior, one-coat coverage
• Reach tight corners and angles with 3-way direct dial sprayhead.
• No Drip application for easy cleanup
• Eliminates the need for roolers, brushes and paint trays

You are drawn to Amazon reviews because you were googling about the product after you saw the TV infomercial on PaintZoom, right? If that's the case give yourself a pat on the back! You are doing great research and you may just have saved yourself $120 and other troubles of testing and returning PaintZoom.

However you find this review, let me just start by saying that if this were such a great product as shown on TV paint professionals would be using it on their jobs everywhere. The reason they are not is that PaintZoom, like many other cheap paint sprayers, is not an airless paint sprayer. In general, paint sprayers come in two kinds; one uses a liquid pump to force the paint onto the surface and the other uses air to push the paint out with an air jet. The expensive and professional kind is the airless one. So what are the big downsides with the HVLP (air) paint sprayer like PaintZoom? First of all, because the sprayer is basically just an airpump with a paint bottle attached to it, it requires that the paint must be thin enough to be lifted by air jet and sprayed out evenly. This is a big deal! The viscosity requirement makes it time consuming to dilute the paint with water and constantly checking its viscosity with supplied viscosity cup. Because if the paint is too thick it won't spray evenly if its too thin it will be runny and wavy under the air jet. I have to tell you that ALL paints and primers have to be diluted tremendously to meet the viscosity requirement. That means that you will have to spray twice or three times to get the same thinkness of coating you would normally do with undiluted paint. Other downsides of such air based paint sprayer include dusty surroundings especially for indoor projects and massy cleanups.

Anyway, you get the picture--its not an effortless, quick solution to your weekend paint project like the TV infomercial would lead you to believe. Paintsprayer for easier weekend projects is a great idea. But I would suggest spending extra $80 to get a $200 airless sprayer.

Buy New Paint Sprayer Paint Zoom PZ-001 Paint Sprayer with 3-Way Spray head Now

Had a small room to paint and was excited to use my new Paint Zoom. It was easy to assemble and started using it right away.

By using, I mean attempting to get the thing to work. It just spit the paint onto the wall. I tried adjusting the nozel and the distance to the wall. It would just not evenly cover any area. I may have covered a square foot in 30 minutes. The machine also got real hot resting on my hip.

It truly is a piece of garbage. I would not recommend even trying it.

Read Best Reviews of New Paint Sprayer Paint Zoom PZ-001 Paint Sprayer with 3-Way Spray head Here

Very diappointing gadget. Uneven coveridge on flat sufaces.Seal between hose and

paint container broke by first use. Very disappointed I gave this Item as Gift.

Also somewhat embarrassing. Dont, know what to do with it now.

Want New Paint Sprayer Paint Zoom PZ-001 Paint Sprayer with 3-Way Spray head Discount?

I contemplated purchasing the Paint Zoom for some time. I'm a brush and roller type of guy. I use a Craftsman Power Painter. I read numerous Paint Zoom reviews and decided to go ahead and try it. Let me tell you right off, don't waste your money or time. It doesn't work period. I believe the company writes most of the reviews. I opened up the package today 3/24/2012 and watched the DVD provided, read through the instructions all which was easy enough. I was painting a bedroom so I taped off the windows and all. That was a pain in itself but nonetheless I was wanting it to perform as advertised. I was using a good quality latex and the instructions said the viscosity should be such that the cup would empty in 50 secs. In 2 Quarts I had to use 4 1/2 viscosity cups of water to thin the paint to empty in 48.7 secs. I tried the Paint Zoom and it spattered, not even at all. I adjusted the flow needle in and out a little at a time. It still gave a really crappy finish. Either the one I have is defective which I strongly doubt or it flat doesn't work as the advertisement show. Plus it's pretty noisy. Made in China, it's really a piece of CRAP! I'm not wasting any more time. Brush and roller. Hell, the time I've wasted, I could have been done by now. I spent over an hour just getting the viscosity right.

I bought this New Paint Sprayer "Paint Z00m PZ-001". It works but it over heats after 10-15min.. All parts are made of plastic. I did less than half of my room with this sprayer... i gave up after 2 hours.. waiting for it cool down.. It would have take less time if I would have painted with a roller.

25lb Medium Black Beauty Blast Media for use in Sandblast Cabinet Durable Reuse

Media works great removing grime, dirt, and rust from metal parts. Media is reusable and flows nicely through the hose and nozzle.

It works very good on cleaning aluminum parts Ihavn't tried it on paint yet but sure it will do fine

Buy 25lb Medium Black Beauty Blast Media for use in Sandblast Cabinet Durable Reuse Now

Love this blasting media. We use it a lot in our shop in the blasting cabinet to remove rust and old paint on car parts. It last s a long time and doesn't get the cabinet too dusty, like with silica sand or first choice.

Read Best Reviews of 25lb Medium Black Beauty Blast Media for use in Sandblast Cabinet Durable Reuse Here

Works like magic on my historical vehicle. I feel safer about breathing the dust and health issues. My second batch.

Want 25lb Medium Black Beauty Blast Media for use in Sandblast Cabinet Durable Reuse Discount?

black beauty is awsome for sandblasting works the best. the one thing you want to do is get a water oil separator. without that it cn be a nightmare. works wonders for sandblasting .. and you can purchase them on this sight.

5 HP 3450rpm R56Y Frame 208-230 Volts Replacement Air Compressor Motor - AO Smith Electric Motor #B

• 208-230 volts 22.0 amps 60hz
• Open Drip Proof - Ball Bearings - Service Factor 1.15
• Non-Reversible - CCW Rotation facing the shaft
• Flat Rigid Base Mount - Manual Overload Protection
• Shaft: 7/8" diameter x 2 1/4"

My husband asked me to order this for him and it arrived faster then we could say "what"? Was purchased to replace something or another in his compressor , he replaced it with this, and he's happy again. PERFECT transaction!

Campbell Hausfeld RP3200 12-Volt Inflator and Worklight

• One 12-volt, 150 psi inflator with worklight that's ideal for roadside emergencies
• Provides fast, easy inflation of high-pressure items such as tires and sporting equipment
• Conveniently operates from your car's 12-volt outlet
• Includes 3 inflation nozzles, universal adapter, cigarette lighter plug, built-in pressure gauge, work light, and flashing hazard light
• Weighs 3.5 pounds; 1-year limited warranty

The RP3200 inflates the tire, the automatic feature operates as advertised and the device is easy to operate.

At the same time, these observations should be noted:

The vibration that occurs when it is operating is such that the device must be held down or it will jump around.

The inflation valve goes on easily, but some force is required to remove it. In the process, some air escapes from the tire.

The inflation hose and the power cable must be folded carefully in order to store them in the compartment provided on the back of the RP3200.

I would recommend this product.

Buy Campbell Hausfeld RP3200 12-Volt Inflator and Worklight Now

This unit is very compact, and is also very powerful for its size. The

electrical plug-in is plenty long, and the air hose is also sufficient.

I would recommend this unit to be carried in your vehicle, car or truck,

or be left in your garage or workshop for use. I'm glad I purchased

this unit

Read Best Reviews of Campbell Hausfeld RP3200 12-Volt Inflator and Worklight Here

I have owned this tool for almost a year now, and have used it regularly to maintain tires at proper pressure. Easy to use, reliable, light is useful when needed.

A tad noisy if I want to find a fault with it.

Want Campbell Hausfeld RP3200 12-Volt Inflator and Worklight Discount?

It is nearly impossible these days to find an air hose at a gas station. Especially a WORKING air hose! This cheap little gadget solves that problem. I've had it for a little over 2 years, and find it indispensable. It's super-simple to use, and I love how it shuts off when your desired air-pressure has been reached, so you don't have to disconnect the air hose, check pressure, reconnect the hose, and try again...and again.

As others have mentioned:

It is noisy [but have you ever heard a quiet air compressor??];

It jitters around a bit on the ground while it's working [but I don't see that as a problem -after all, it can only go so far while the air hose is attached to your tire's valve stem];

The coupling seal is so secure that it's impossible to remove it from the valve without losing a little bit of air (so, you simply adjust for that by putting in an extra 2-5 PSI to begin with); and

You can only plug it into your car's 12V power outlets -you can't plug it into an home AC outlet.

And yes, you do need a little bit of patience (about 60-90 seconds' worth) to coil the air hose and the power cord back into the little cubby area. Hint: Start with the air hose first, then coil the power cord, "nest-like," concentrically within the air hose coil.

It's not fancy, and it's clearly not built for heavy-duty, frequent use. But when you need it, it does the trick. Just last night, upon starting my car to drive home after a grueling work day, the warning came on the dash that 2 of my tires were low in pressure. It had started to snow, the wind was whipping, and it was bone-chillingly cold. The last thing I wanted to do was drive around in search of a working air hose. Thanks to this little gem, all I had to do was pull into the comfort of my own garage and hook it up (after letting my tires cool so the pressure readings would be accurate). Fifteen minutes later, all my tires were inflated to the correct pressure, and I was snug & warm inside my home.

This $26 gadget is a little life-saver (and sanity-saver); it's a gotta-have-it tool for your trunk or garage!

Save 31% Off

My car is parked at a location without AC power so I keep this small 12V pump in the trunk. It has a compartment that stores the power cord and air hose. The power cord is long enough to reach both tires on each side of the car. The pump is reasonably quick to inflate considering it is 12V. There is a built-in pressure gauge and flash light. I highly recommend it!

DIAL MFG INC #1195 1100CFM Concentric Pump

• DIAL MFG INC #1195 1100CFM Concentric Pump
• DIAL MFG INC
• 140 degree F. (60 degree C.) maximum operating temperature
• Meets ASTM D-2466
• Conforms to NSF Standard 61

The Pump is a great replacement to my original stock pump and seems to be doing a great job thus far. Now for the negative part, the part was delivered over a week past the expected arrival date(and yes I acounted for buiness days only). When I treid contacting the seller via phone I was put on hold never pick up after that. I then used the email, they had responded fairly quickly however only gave me a link to track my package. Bottomline great product poor service, if you have 3+ weeks to wait for the product it is worth the price.

Save 29% Off

Fuji 3004-XPC Q4 Gold HVLP Spray System

• Professional spray gun now features pattern control knob to adjust size of fan pattern from small to large
• spray gun has 100 percent stainless steel fluid components, ergonomic handle is insulated ? never gets hot.
• Non-bleed spray gun for less blowing around of shop dust
• High-efficiency air cap installed for reduced overspray
• 25ft hose includes air control valve to reduce overspray and bounce back

Simply put; this is a great product! I'd recommend it to anyone. I don't have a fancy set-up, I just spray outside on nice days. I've been using it for over a year on a variety of farm implements and tractors, and it always does an excellent job. Compared to the air-compressor type sprayer I use to have, this is far-and-away a better approach for painting anything. Why would you ever use an air-compressor after this? You won't regret this purchase.

Buy Fuji 3004-XPC Q4 Gold HVLP Spray System Now

I built a small desk for my son out of mahogany and I was trying to match up the quality of the wood with a nice finish. I tried brushing an oil-based stain, followed by multiple coats of lacquer, but I was never satisfied with how the finish looked or how uneven the brush marks were.

I read about using spray guns in various finishing books, but I was afraid of how much more involved spraying is compared to brushing. Living in California though has its advantages, one of them being that most of the time it's sunny outside. I realized I can build a setup a small cage outside, with a frame built from 2x4s and use plastic sheets as walls. With such a cage using a spray gun became something a lot easier to handle, since you don't have to worry about creating a mess around the spray area or having to install large fans to remove toxic and potentially combustible fumes.

Based on reviews at Amazon and on the web, I decided to go with the Fuji system, but instead of getting the system with the regular spray gun, I chose the gravity gun. Big mistake! Fuji's gravity gun, at least the one I got, could not get the top tight enough so the stain would not flow outside of the cup.

Customer service was top notch. I sent them an email and got a reply within the next day. They sent me a gun using a regular cup, like the one in this system. I was told that I'd also receive a tested gravity gun, but that never happened. The regular gun performed wonderfully, no overflows whatsoever. The lid closes extremely secure and it uses a gasket, as well as a diaphragm under pressure to keep the liquid in the cup from flowing on the outside.

Looking at the design of the gravity gun, it only has the gasket, with no diaphragm. You use your hand to tighten the lid, but that's not sufficient to secure it tight enough so that stain doesn't flow out under pressure. I'd say unless Fuji changes the design of the gravity cup, just stick with the regular gun found in this system. It's design is proven and just works.

The air compressor is relatively quiet. I haven't tried the non-Gold systems, so I don't know how noisy their turbine is. In practice, when I spray the turbine stays about 20ft from where I am, so noise is not that much of a problem. The turbine pushes hot air, so metal components on the turbine can be hot. I've had the turbine run on and off for more than an hour though, with no problems whatsoever. The air pressure and volume are constant, I didn't see any problems.

The spray gun is non-bleed: there is no air coming out of it when you don't spray. This is a very nice feature, since it allows you to concentrate on the actual spraying procedure rather than constantly hearing a high pitched noise very close to you.

I suggest getting the Fuji 2049F 6-Foot Hose, it's a lot lighter than the hose than comes with the system. It makes spraying large horizontal surfaces (like desks) a lot easier since you don't have to lift and hold the heavier hose for long periods of time.

Read Best Reviews of Fuji 3004-XPC Q4 Gold HVLP Spray System Here

Product is easy to handle, in hindsight, would have gotten the spray gun with the attachment on top but it is quiet with very little over spray so easy to use indoors. Would definitely purchase again and look forward to refinishing furniture.

Want Fuji 3004-XPC Q4 Gold HVLP Spray System Discount?

I used it to finish guitars with water based finish (I got the #3 needle).

Easy to use, easy to clean, and great results.

Noise, what noise?

Very happy with it.

Save 17% Off

Superior results with a broad range of settings on the gun. After using an airless, it's almost surprising how simple this system is to set up and get spraying!