4 Ton 13 Seer Goodman Air Conditioner R-22 - GSC130481

• Runs on R-22 refrigerant
• Comes charged with Nitrogen to hold pressure - refrigerant NOT included
• Outdoor unit only
• Replacement outdoor unit on older R22 systems

Had one of these installed today and so far it really cools well & is very quiet. Has 5 year warranty so no worries there. This replaced my 11 year old Yorx which had a fried compressor. Needs a competent installer to assure a full & correct install.

Save 29% Off

Campbell Hausfeld PA2121 Standard Air Filters

• Removes unwanted dirt particles and condensed water to extend tool life
• 5 micron element provides maximum filtration
• Metal bowl-guard protects against impacts
• Quick release bowl and quarter turn drain for easier use
• 57 SCFM flow capacity at 90 PSI

The filter that I received it not the same as the picture listed. Although they have the same part number! The one that I received has a large seal ring that must be screwed on to attach the bowl and it is extremal hard to seal!

Buy Campbell Hausfeld PA2121 Standard Air Filters Now

After reading the reviews, I had my doubts about this filter/separator, but went ahead and installed it inline on a bead blast cabinet, and it actually works quite well. After about 10 minutes of work with the bead blast cabinet, I noticed the reservoir was about half full of condensate. My bead blast cabinet is about 30 ft from the air compressor, this length is long enough to allow the water to fall out of suspension and be removed by the separator. I live in central Louisiana, where it's very humid. The filter/separator did its job by removing the condensate so the blast media wouldn't clump up.

Read Best Reviews of Campbell Hausfeld PA2121 Standard Air Filters Here

It works great if you can cool the air down. Does what it suppose to do only if installed far enough away from compressor to allow air to cool or installed after compressed air chiller.

Want Campbell Hausfeld PA2121 Standard Air Filters Discount?

I Purchased this filter/water seperater to rid my line of the condensate in my Air lines but it dose not work for that at all. after having in line for weeks now still water running out the hose and none comming out of the valve on the air filter (I live in Cold weather . . . water is eating up my tools if anyone knows of a good product plz let me know thanks)

Save 53% Off

I needed a filter and regulator combination. This over/under combination reducted space and does an excellent filtering process. I would definitely recommend for use as filter prior to spray painting with controlled psi.

Power Bright PW6000-12 Power Inverter 6000 Watt 12 Volt DC To 110 Volt AC

From Lowe's (same author) This inverter has so far (about three weeks of use) proven reliable and easy to use. The question is does the average person need a "6000" watt inverter. From what I've learned, it depends mainly on what your appliance starting loads require, not the operating load. If you're going to run a modern refrigerator or microwave oven I've found the 3000 watt starts and runs ok. But I wouldn't recommend it for the big microwave ovens--the 3000 watt unit just can't keep up with the demand. A small airconditioner that has a 1000 watt operating consumption may well require 4000-5000 watts over 5-10 seconds to start its compressor. The 3000 watt inverter has been known to kick off line after only a couple of seconds at 4500 watts and therefore won't start the airconditioner. This 6000 watt inverter does well here with plenty of operating juice to keep stuff running, but puts a real drain on the batteries.

Also worth noting is this 6000 watt inverter seems to maintain more voltage stability--I've run it at around 3000 watts and the its output voltage never dropped below 118 VAC and its frequency remained steady at 59-60 cycles per second.

Botom line is that to-date, I'm very satisfied with the 6000 watt inverter's performance and reliability

First I bought a small inverted thinking it will be enough to power up a big air condition and it failed. Then, I bought this humongous powerful inverter and at first it also failed. Their customer service is GREAT explain the problem. I was connecting the inverter with gauge 4 cables and it was powering up most stuff, but when it came to the 10,000 BTU air condition it failed. Then, they told me to change does weak gauge 4 cables and get gauge 0. After, that it was a beauty. This is hooked up with 2 106AH marine battery for now which I am going to put 10 in total. They are being charge by solar panels for now I only have 360 watts with gauge 4 wires, later I will put for 1000 watts of solar panels.

Quick update, the A/C actually sucks about 4,600 watts for a good 10 seconds before it drops down to regular watt at 890 watts. Sense this thing actually is 6,000 watts and 12,000 peak there is no problem. With does 2 106AH marine battery it last just over 1 hour at night and 1h20min at night.

Buy Power Bright PW6000-12 Power Inverter 6000 Watt 12 Volt DC To 110 Volt AC Now

I Have a mobile dog grooming business and i didn't wanna put a generator because of the noise,smoke,space etc. so i found out about the power inverter PW6000 and knowing that it will cost a lot will all that you need to buy in order to make it work properly + an electrician,mechanic,etc. i took the chance and so far so good,nice and quiet,clean...green :)

The customer service rocks!!!! always there for your questions and always always the perfect solution.

Read Best Reviews of Power Bright PW6000-12 Power Inverter 6000 Watt 12 Volt DC To 110 Volt AC Here

The inverter was exactly what I needed and it works very wells.. Has enough power to handle every thing we have plugged in to it, fridge, microwave, coffee pot and still has plenty of power, but is very heavy.. weighs 35 pounds..next time I will request different boxes for shipping.. The remote was damaged when the inverter moved around inside the box, smashed to into several pieces, but I called and it was taken care of immediately.. So I am a very happy customer.

Want Power Bright PW6000-12 Power Inverter 6000 Watt 12 Volt DC To 110 Volt AC Discount?

We installed this unit and it worked for about two weeks then stopped working. We turned on the lights one morning and smoke started to poor out of the back of this unit. We quickly shut off the lights and unplugged the unit from the batteries. We tried the unit again latter that day, same thing, smoke. I am currently looking for another option at this point. Amazon was good to accept this return. However, I was bummed to have to pay the $65.00 UPS shipping and insurance.

Save 21% Off

WL026100AV Campbell Hausfeld Air Compressor Air Filter

• Campbell Hausfeld Air Compressor Air Filter
• Fits Campbell Hausfeld, Husky, Sears plus others
• 1/2" Male Pipe Threads
• Height: 2-1/4"
• Diameter: 2-1/2"

worked like it was suppose to and fit my compressor perfectly. Although it is a little small for the compressor that I use it on it works great and seems to filter the air as it is suppose too.

Porter-Cable NS100B 1/2-Inch to 1-Inch 18-Gauge Crown Stapler

• Long life maintenance-free motor to keep from staining the work surface
• Internal piston catch for consistent max power on every shot
• Rear exhaust to keep contaminants away from work
• Drives 18 ga. staples with 1/4-inch crown from 1/2-inch to 1-inch length Tool-free depth-of-drive adjustment with detents for proper setting of staples
• Included with stapler: 1,000 18-guage 1-inch staples, 1/4-inch fitting, safety glasses, and carrying case

January 21, 2012.

If this Porter Cable staple gun works for a very long time without breaking down, I will be most satisfied. I am building a boat and have a way to go.

The gun is very lightweight and easy to handle. It loads easily. I am using 5/8" staples. Press the release, slide the slide open, and load staples. Close the slide and allow it to snap shut. In front of the trigger a wheel allows the operator to set the staple deeper or shallower into the material, depending on use.

I purchased poly line separately and hooked up to a tiny compressor. After shooting ten or so staples the compressor turns on but manages to always keep up.

AUGUST 30, 2012 UPDATE:

After firing 21,000 staples, the gun broke. But to be fair with Porter Cable, I must add that I work with epoxies and use the gun to staple down plywood that has been epoxied. Therefore epoxy gets on and in the firing point of the gun. When purchasing a new stapler, I reordered the same Porter Cable gun on August 28th, 2012. That speaks better for my overall satisfaction, than anything.

Buy Porter-Cable NS100B 1/2-Inch to 1-Inch 18-Gauge Crown Stapler Now

Works very well at the prescribed air pressure. It never misses a lick. I use this gun every day building cabinets, jewelry boxes and other things. I have the 18ga brad nailer as well. The perfect pair in my little shop.

Read Best Reviews of Porter-Cable NS100B 1/2-Inch to 1-Inch 18-Gauge Crown Stapler Here

As advertised, looks good, well made, light cannot wait to start using it matches the other Porter Cable Tools I have.

Want Porter-Cable NS100B 1/2-Inch to 1-Inch 18-Gauge Crown Stapler Discount?

Porter Cable Crown Stapler is a great tool. You need an air compressor to operate, but the staples are easy to load and the tool has a good grip and a solid trigger button. Well worth the price.

Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit

• 62-piece pneumatic tool kit ideal for do-it-yourself jobs
• Includes a 1/2-inch impact wrench with 250 foot-pounds of torque for quick removal of stubborn bolts and nuts
• Included 3/8-inch ratchet with 50 foot-pounds of torque removes and installs nuts, bolts, and sparkplugs quickly
• Kit also includes 1-5/8-inch air hammer; blowgun with 6 accessories; 10 impact sockets; and much more
• Includes a high-impact carry case

I found that the quality of the tools are very good for the price of the kit. The kit is also well made and holds the tools nicely. I did have to buy a bigger air compressor as my first compressor didn't push enough air to run the tools for continuous use..

Buy Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Now

The air tool kit look well, but you must know that you require a minimum 5 HP 13 Gal. or equivalent air compressor.

Read Best Reviews of Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Here

So i bought this kit based on the price and reviews, i'm a real DIY kinda guy, i was not disappointed with the quality and performance of the items. I was quite satisfied.

Want Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Discount?

This is a good way to get started with a new compressed air machine.

I got one for my workshop and this was available at a great price and I am familiar with the brand which is what I would call at least medium quality.

There is not much joy in it but you need an assortment of these and this is the best way to get it all in one package on the cheap.

Save 41% Off

I got these tools with my compressor. I have used the impact and ratchet and have NOT been impressed. I have not used the air hammer yet. I should point out that I have used a variety of air tools before, from many brands including snapon. This kit is a lot cheaper then high end tools and it shows.

Pros:

They work

Tools have not failed catastrophically

Cons:

Both are NOISY and use air like crazy

Impact was unable to remove the lugs on my truck. I tried different air pressures (my compressor goes to 200PSI) and my compressor has plenty of airflow (5.2 SCFM). I ended up having to break the lugs free by hand. After lugs where free, impact was able to remove them (albeit in a noisy fashion). Impact is able to tighten pretty well, but wear ear protection.

Ratchet works pretty well but is slow and lacking in power.

Overall, I have to give these tools a pass. They may work, but they are extremely noisy (even for air tools) and lacking in power. If you have a BIG compressor and need a couple of inexpensive air tools for cheap, this kit may be for you. Next time, I am going to buy fewer tools (I really only needed the impact) and spend more money on them.

Air Pro PUR-14X050 1/4-inch by 50 Polyurethane 250 PSI Air Hose

• 1/4-inch by 50-foot polyurethane 250 psi air hose
• Flexible to negative 40-degrees Fahrenheit; 2-1/2-inch bend radius; translucent to show contaminants-inch line
• Lightweight polyurethane
• Includes reusable hose ends and hose
• 1/4-inch by 50-foot; 3.69-pounds

This hose is extrememly lightweight and flexible. I finally bought one a few weeks ago thinking it would be nice to use when doing the trim work in the house. I have found that it is indescribeably better than the 3/8" rubber hose I had been using, and I really wish I had it at the beginning of the project. It does not kink as easily, is much more flexible, and thus much easier to drag along behind you without hanging up on things. When working in confined areas such as a closet or hallway, it is less likely to scuff the walls and damage freshly textured and painted sheetrock. It is very easy to coil up and put away when finished, as well. This hose is like having an extension cord attached to your air nailer, only I think it is even lighter weight than an extension cord. If you use air tools more than an hour in the next year, you will be happy you bought this hose.

Buy Air Pro PUR-14X050 1/4-inch by 50 Polyurethane 250 PSI Air Hose Now

I do lots of roofing and general framing. This hose is the best I ever had, especially in cold conditions.

Read Best Reviews of Air Pro PUR-14X050 1/4-inch by 50 Polyurethane 250 PSI Air Hose Here

Excellent hose, very light weight, and kink free. Also VERY durable, we ran this hose across razor-sharp wire mesh all weekend and not a single leak. Other than the price, the only complaint I have is the ease with which it tangles when coiling, but if you have a reel, this is the hose to get.

Want Air Pro PUR-14X050 1/4-inch by 50 Polyurethane 250 PSI Air Hose Discount?

I have used many different brands of air hose for my 20 years carpentry works. Conventional hoses are heavy and also not easy to roll after work. I bought it a year ago from Amazon. Since I have used it, I have never taken old hoses anymore. This is very durable, light and easy to handle with nail guns. Price is much higher than conventional hose, but it is worth. Excellent product!

Save 48% Off

I have the 1/4 & 3/8 versions of this hose. Both are bombproof and excellent. After 2 years neither has presented a single working problem. I prefer the 3/8 hose simply because it seems to store more easily and unwind without the granny knots.