ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI

• Mounting bracket hole pattern: 4in. apart (width), 5in. apart (length)
• Heavy-duty rubber stop is adjustable for safe usage
• Four direction non-snag rollers reduce hose wear abrasion
• Mounts on wall, floor or ceiling
• Heavy-duty powder-coated steel constructed wheel

Northern Industrial Air Hose Reel With Hose 3/8in. x 50ft. Hose, Max. 250 PSI

I bought one of these hose reels because the price was so low. It was also to be used infrequently, making it harder to justify an expensive model. We have a Cox Reels auto-rewind air hose in our garage and a Reel Craft model in another location, but those professional-grade brands cost a whole lot more.

Pros:

The all-steel rewind mechanism works well and is sturdy. It's easy to find a lock point when unwinding the hose and just as easy to rewind all of the hose when you're done. There's plenty of room for 50' of 3/8" air hose.

The steel frame is strong. For example, the plate that attaches to the wall is nearly 1/4" thick.

The swivel mechanism where the air hose connects to the reel is brass.

Inexpensive.

Cons:

Throw a few coins into a large metal can and giggle it vigorously. That's the sound you'll hear from this reel when the hose unwinds or rewinds. (The noise comes from the rewind spring clanging on the inner and outer sheet metal spring-housing covers.) I put 1/8" thick stick-on foam on that cover, but the reel still sounds like it has loose parts.

After one year, the rubber hose broke apart, about 4" from the end. It didn't just leak, the end actually fell off. The ENTIRE hose had deep cracks over its entire length, so it was unrepairable. I replaced it with a genuine Good Year air hose. By contrast, the original air hose on our Cox Reel still looks fine after nearly 20 years.

Summary:

I should have bought a Cox Reel, Reel Craft, or other quality reel, rather than trying to save a few dollars with this brand.

Buy ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Now

I read the reviews before I bought mine. The 25 and 50 foot ones are the same just comes with different length hose (sorry to insult your intelligence). I use them on average 2-3 times a week, so not a whole lot of use and so far they are doing well. Can't complain. I just didn't have the $$ for a $300.00 one and I don't use it as often as a commercial shop. It arrived on time, no dents, missing parts, etc.

Read Best Reviews of ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Here

Worked Great for about 18 months ... until the hose gets hairline cracks in it and leaks (the entire length). Now I have to find a replacement hose, what a PITA.

Want ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Discount?

This reel works well and as it says it's supposed to. I use it lightly because it's just in my home garage. This reel is not heavy duty and you can tell it wouldn't last long in an industrial shop. For home use this is exactly what I was looking for. My dad has a much stronger commercial hose reel and the spring action is much stronger on his but for the price, this does the job well. Yes, the host on this seems cheap and I don't think it will last the life of the reel but.... it's not that expensive of a reel! You get what you pay for... if you want the best, this isn't it... if you want to get the job done and are not using it daily, this is a great choice!

Campbell Hausfeld VT6358 30-Gallon Cast Iron Portable Vertical Compressor

• Powered by 2-HP motor
• Two-stage cast iron pump
• Vertical tank offers 30-Gallon capacity
• Semi-pneumatic wheels for moving
• 5,000 hours of pump life

I just bought the Husky Version from home depot. Model Vt6315. You will save over $100 plus get a 4 year warranty. Everything is the same, only difference is color. I have just started to use it and so far so good. I am doing some body work with a sander. Sander is an Air hog and this has no problem keeping up.

WARN 71801 PowerPlant Air Compressor and Winch

• A powerful air compressor combined with a high-duty winch lets tradesmen, farmers, and ranchers get more done in less time
• All-in-one unit is simple to install so you can spend more time working
• Accessories such as auxiliary air tanks and plumbing kit are available to store more air on your truck
• Designed for tradesmen, farmers and ranchers
• Comes complete with: nylon air hose, hand-held control with thermometric LED, quick connect couplers, tire gauge and dual air chuck

Delivering the winch -

A whopping 107lbs package but every ounce was worth it ! Love this unit

Installing the winch -

Installed it on a Rugged Ridge XHD front bumper with hoop. I purchased the Rugged Ridge brackets for the power plant and winch installation worked great.

I was a bit bummed however that the Rugged Ridge hoop no longer fit over the wince. Certainly not WARN's fault! Need to have a talk with Rugged Ridge!

Wiring up the winch -

I was a bit concerned the wires to the battery might be too short Nope Ran them up past air intake, along side of wrangler and they reached the battery poles just perfectly! Wiring took 10min

Preparing the winch -

Plugged in the remote only to find the remote was missing the Compressor on/off button! This particular version of remote was only equipped with a reel in/out switch. A small disappointment because the winch was new and box was never opened before, I'm guessing this packaging mishap happened at the plant. Bummer HOWEVER -

Called WARN customer service next day and was amazed After a few press 1 press 5 press 2 customer rep answered within seconds they then offered to send out the correct remote w/o any hassle, nor did they even asked me to return the incorrect remote ! Another +++

Testing the compressor and winch -

Winch reals in/out smoothly, like a swiss clock. Heading out 4 wheeling this weekend and hope to get stuck soon ! With a 12000 lbs winch you can't go wrong !

WARN rocks!

Buy WARN 71801 PowerPlant Air Compressor and Winch Now

highly recommend. i have owned this for about a month. have used it a few times. pulled a tree stump out with no sweat, after choping a few roots. large bush like i was just free spooling, when my quad was sliding all 4 tires when trying to winch with it. do not plan on getting truck stuck. but i have it. and now i have good on board air comp. my old air comp was .9 cfm. this one has 5 cfm. note the point in front of the nine. very nice air supply. if you have a large truck and you find yourself in any back country at all. you need to think about this. and if i still had an f150 i would own the powerplant hp 9,500. WARN 71801 PowerPlant Air Compressor and Winch

Read Best Reviews of WARN 71801 PowerPlant Air Compressor and Winch Here

This like all Warn products is the best quality. I added a Viair 2.5 gal tank to it and it will fill the tank in less than 60 seconds. You could never go wrong buying this winch.

Frigidaire FRA156MT1 15,100 BTU Window-Mounted Median Room Air Conditioner

• Window-mounted installation
• 15,100 BTU cooling capacity with 3 fan speeds
• Cools room sizes up to 900 sq. ft.
• 4-way air direction control
• Electronic controls with full function remote with thermostat

(*****Update 7/14/12: Wanted to update my review on this and other 15K BTU units. I've been running them for two seasons now in several of my family homes and rental units. They are holding up VERY well. On the Frigidaire they are proving to be quite reliable and hearty. Also to note, the build quality this year seems to have slightly improved over initial models with fewer incidences of rattle and other defects. Last, the price premium has fallen. I would now give the Frigidaire 15K units 4 stars and have even started using it as my workhorse in larger rentals. *****)

This is as big as you can go with 110 volt plug. It takes 12 AMP of power, so whatever circuit you plug it into will likely have little room for anything else (think entertainment center, microwave, etc.)

Beware of window height. Some window styles won't open high enough Check yours.

Pain to install. Takes me 2 people and 45 mins every time I do one of these big boys.

Cold? Oh yes. It's the full 15,000 BTU. A mighty blizzard compared even to the 12,000 units. It will cool whatever room you put it in and probably the adjoining ones too.

Loud? Compared to others on the market today yes. Compared to even 5 years ago? Not really.

If you've got the window to fit it in and the significant wad of extra cash to pay for the size premium, the only concern I would have is 1) noise and 2) shipping. (This unit's box is just too much for one poor delivery man whereas the smaller box for the 6/8/10/12K BTU units is manageable).

3 stars because I think it's overpriced and find Frigidaire of avg. quality.

Also to consider... here's the review I gave on another model that is relevant to this one:

------------------

Between family and rent houses I put all types and sizes to the test every year in the scorching Texas sun. Here's my experience:

If you want a solid window air conditioner, it really boils down to two choices: Frigidaire and LG. The current "sweet spot" on reliability/price/economy is the 10,000 BTU unit regardless of make/manufacturer.

Recently they've been making 12,000 & 15,000 BTU 110V (normal plug) units.

-The 12000 BTU truly is 20% stronger, but you pay 50% more here on Amazon.

-The 15000 BTU is a snowball tossing beast, but it's in a larger case that may not fit your window (height-wise) and doesn't have a long history on the market so we don't know how it will do long-term

LG Pros The 10,000 BTU LG is my "workhorse". Best value. Run them till they fail in 4 to 7 years, then swap `em out for another.

1) Better warranty (but really, who cares when it breaks because you're sitting there sweating)

2) Typically last an additional 2-3 years over other brands

3) An LG rarely just stops running it will degrade slowly over a season

4) They are more tolerant of neglect (e.g. dirty filters... can't rely on tenant to care for your stuff)

5) Better withstands being placed in harsher environments (direct sunlight, restricted airflow)

6) Lower "lemon" rate

Frigidaire Pros For family I prefer to run 12,000 & 15,000 BTU Frigidaires. They are a little nicer, and I consider it worth it even though they always break sooner. (Value and reliability aren't as important, but I do have to compensate by keeping a new boxed spare around because they always fail at the most inopportune moments. Most people can't do this.)

1) A little nicer looking

2) Better features

3) Quieter

4) Slightly easier installation

5) Circuit surge/drain on startup seems significantly less (think lights flickering when compressor comes on)

Other parting thoughts:

1) A thing to know about newer units: To obtain the higher EER (efficiency) ratings, they use finer design on heat exchanger fins. For the non-experts, this means smaller little spaces that get jammed up with dirt/mold/whatever resulting in a clogged/filthy/poorly operating unit much-much faster than your parents' old units. Appliance repair stores can service your window unit every year (clean it of filth) that will extend life by at least 2 years and sometimes much more. Of course this costs anywhere from $50 up, and the units are cheap, so it's your call whether to service or toss it.

2) The 10,000 BTU Frigidaire here on Amazon is a good buy w/Amazon Prime shipping. For other higher BTU models, as of this writing you'll be paying more but also know that right now with the national heatwave most box stores are sold out so you may not have a choice.

3) Something this heavy is a risky ship (versus store pickup). It might be shipped wrong-side-up, or dropped, or whatever. It's a risk you'll run so do so knowingly. (I seem to have pretty good luck w/Amazon shipped items.) The risk is offset, however, by advantages of buying from Amazon (store would take forever, you'd have to load it and bring it home, have to have a vehicle large enough to carry it, etc.)

4) Clean. Your. Filter. Every. Week. It will keep your little ice machine healthy.

5) Different stores have different models from the same maker. If they are made in the same year, it doesn't seem to make a difference.

6) Tempted to go cheap like a Haier? Don't.

7) Tempted to buy a 6,000 or 8,000 BTU model? Don't. Get the stronger unit. It will cool down the room faster. It will not need to work as hard as a weaker unit and last longer. It is built with some stronger/better key components.

Good luck and happy cooling.

Buy Frigidaire FRA156MT1 15,100 BTU Window-Mounted Median Room Air Conditioner Now

We have a 3 year old Frigidaire 22500 which is wonderful. It was an excellent inexpensive yet quality alternative to the Freidrich it replaced. When it was time to replace our bedroom a/c, I automatically drifted to the Frigidaire brand. Because it is powerful, the fan is quite loud on high; tolerable on low. It cools an attic bedroom which takes the sun all day because roof exposure is east-west. Use mostly at night. Cool-down from 90 degrees to 75 is about 10-15 minutes. Really! If during the day, the cool down is another five minutes. Great machine. Excellent price delivered.

Read Best Reviews of Frigidaire FRA156MT1 15,100 BTU Window-Mounted Median Room Air Conditioner Here

Warning: These are something of a pain to install. I got two of them, so on the plus side, I was an old pro for the second one. :) This is not one of those you can just drop into the window--you have to disconnect and remove the front, remove the outer shell, install the top bar, side runners (for the the expando deals to attach to), install the mounting brackets, install a spacer (if you have old wooden windows like me with storm windows), then install the unit into it and reconnect the front. Took me a few hours for each one, being careful.

On the plus side, they are powerful and do a great job cooling my 1600 sq ft first floor (with 10ft ceilings). Another plus is they run off 110 volt line, so you can plug them into regular outlets. On the other hand, they take 12 amps (rated, and I measured it). So you basically still need a dedicated 15amp circuit for these puppies.

Anyways, I also bought 3 of the smaller models--all have same operation, remotes. Very straightforward. I love the remote sensing feature--I can put the remote up higher and on the other side of the room and set the thermostat, and it is much more accurate that way (just buy some rechargeable AAA batteries to keep em going). I like the energy saver mode--these use that all the time, so it turns off once it reaches the desired temp and comes on as needed.

They are not quiet, but I doubt your bedroom is big enough such that you'd be sleeping with them; however, don't put them in the TV room--you'll have to turn it up loud. I planned on that and intentionally put them in the other rooms on the first floor--they keep the whole floor cool without being a bother that way. Actually, they may be just a tad too much for my needs, but not so much that it is a problem (e.g., no moisture issues).

The air filters are pretty standard; not hard to clean (like a dryer lint trap); it tells you based on a timer when to clean. Then you just clean and reset.

My only real criticism of these (and all like Frigidaire models) is that "eight way" vents are only so-so. I really want the cold air to blow up, but you can only get them at like a 20 degree angle upwards (if I had to estimate). Seems like most window AC units suffer from this issue, though. Not a major issue, but it could be better.

Anyways, they're energy star rated, but they're still going to cost you, especially in the hotter times, but hey, it is SO worth it! :)

Want Frigidaire FRA156MT1 15,100 BTU Window-Mounted Median Room Air Conditioner Discount?

we received this air conditioner really really fast and my husband had it in the window pretty quickly even though its weighs 112 lbs. we've only had it for one day but seems to work great and even tells you the room temp and you can set it to the room temp you want. we are very happy with this product so far.

Save 7% Off

It took two hours to install this unit by two muscular men. It is not as simple as other window AC units, which you just have to slide in the window and shut the door. And if you think I am an idiot, think again. I installed and assembled everything that is in my house, furniture from IKEA to my own desktop computer. You would actually have to tear the unit apart to install, which I believe it's much safer way to install. First step was to unscrew four screws after tearing up the front part of the AC unit, slide out the inside of the AC unit (core components), install the metal bar that goes on the top and side of the AC metal cage, and install the outside metal cage first and slide the core components inside in the cage. Sounds simple right? Absolutely not.

This is a good video (not Frigidaire video) that I found on YouTube, which might give you an idea what you have to do:

(copy and paste)

Things I want to point out to FRIGIDAIRE:

1) The manual is absolutely garbage. Must be thorough and have some zoomed in pictures for better idea.

2) Different screws were all in the same bag, and I really can't tell the difference between 5/16", 7/16" from all the other different screws in a tiny bag. This took me longest to figure out which screws go where. And I had ten screws left after installing the unit, since I used my own long screws to stabilize the unit. I was very puzzled during the process if I am doing thing right.

3) The supporter that was included is just pure garbage. It is just a triangle looking piece of metal that you need "perfect precise height" of the window and the window sill to be useful. Instead, I had to buy $40 supporter at Lowes, which also gave me a big problem. I bought the larger sized supporter at Lowes since it's the law for NYC to have bracket or support for window AC unit. After installing the bracket, we tried to put the metal cage on the window. The problem arose when the metal cage is not sitting on the bracket since the cage is entirely empty and bottom of the cage is completely open. So, we have to drill more holes to stabilize the cage before we slide in the core components. When we are sliding in the core component, more issue arose when the component is sitting on the bracket and the cage is held on only by the window and few screws. The inside of the unit is sitting on the bracket at near zero degree slope and the cage has a downward slope (its designed that way). Theoretically, the inside component should sit on the metal cage, but things didn't go perfect. Well, it fits, but slightly off the mark. (maybe like 5 degrees)

4) Installing the side wings for the unit is absolutely madness! Took me good 5 minutes to figure out which side is "right side" or "left side" from how you look at it.

However, it does well on one thing that matters the most. IT BLOWS REALLY COLD AIR! I was a little scared due to living in NYC apartment 7th floor, for not having enough amperage and using 100 year old window to hold 120lb air conditioner. However, it seems things are looking good for this summer!!

BE Pressure 5 Gal Portable Air Storage Tank 125psi NEW

Shipping was so fast it made my head spin; I had a tracking number 30 minutes after placing the order, and it arrived within 3 days. That was with regular shipping.

I looked at quite a few tanks in this size range. They were all pretty decent, but also pretty much identical. Most have a flat strap of steel for a handle and 2 feet at one end also formed from a strap of steel; functional enough, but pretty crude looking.

This tank seems to be much more solid and well constructed than any other I have seen in this size range. The handle is a definite improvement over most tanks I looked at; it was the only one I saw with a tubular steel handle with a rubber grip. It looks like a proper handle and not something that a guy at a welding shop knocked up as quickly as he could. This tank stands higher than most on four legs with four rubber feet which keep it from scratching up the floor of my truck. It does have a drain cock at the bottom which will allow you to vent moisture to prevent internal rusting, which I believe many tanks of this size lack. The paint seems to be pretty thick and smooth, and the welds are even, showing good quality control.

The gauge works well; it is constructed of plastic and operates smoothly with no sign of sticking. One note is that the gauge shows 145 psi well in the red, so for safety it's probably a good idea to consider it as a 125 psi tank, which is the same as every other air tank this size I have seen.

Overall, a very good value for a superior product; a product which is more refined than it's competitors.

I bought this air tank off Amazon. I had looked at several at Home Depot, Lowe's, etc. Wasn't impressed with any of them. Checked Amazon and found this one. It looked better made than most. Not true. It's just like all the others, cheap crap made in China. This one, unfortunately is no exception. No rubber handle grip on mine like the picture and description tout. Scuffed up and missing paint. The metal legs were welded onto the tank crooked. Therefore, it wobbles. Very poor quality engineering/craftsmanship. Very disappointed. Wish I could find one that is well made and not crap!

Buy BE Pressure 5 Gal Portable Air Storage Tank 125psi NEW Now

Accutire MS-4021B Digital Tire Gauge

• Heavy duty construction and rugged design for long lasting use
• Angled head and rubber coated handle for easy gripping
• Large, easy-to-read LCD display
• Equipped with an automatic shut off to prevent deflation
• Accurate to within 0.05 PSI, reading air pressure from 5-150 PSI in 0.5 pound increments

Please ignore the other two users that gave this gauge only one star because it only read 28.5 psi. I find it amusing, but sad, that they didn't realize that there was a protective sticker on the screen that read 28.5. If you peel off that protective sticker, then you get a nice, bright red backlit number displaying your true tire pressure. This gauge works great! The display is amazingly easy to read, and it is also simple to get a good reading.

Prior to owning this Accutire model, I had a 7 year old Accutire digital gauge that finally broke. WIth that old model, it was much harder to get a reading without air leaking out. With this new model, if you just push the gauge straight into the valve stem, you easily get a solid reading without leaking air. The old model's display wasn't backlit either, and I was truly impressed with the large, bright numbers on this new model. I'd highly recommend getting this gauge, as it has all the functionality you need, at a very reasonable price. I like having accuracy to 0.5 psi, and I never use non-digital gauges unless I have no other choice. I also tested this gauge with back-to-back measurements, and it was accurate every time. You won't regret this purchase...

Buy Accutire MS-4021B Digital Tire Gauge Now

This is by far the best tire gauge I've ever had. It lights brightly, easy to see even in sun and always visible at night. Accuracy is high, construction quality is excellent. Highly recommended!

Read Best Reviews of Accutire MS-4021B Digital Tire Gauge Here

While this product works fine, and is accurate, it uses (3) A76 watch batteries. That's a lot of batteries. and the batteries generally only last about 6 months. I have to pay $2 ea for the batteries. Total $6 each time. That's $12 a year. and the unit only cost $8.

Maybe a unit that uses lithium or other long-lasting batteries would be better.

Next time, i think i will try one of the better, more-expensive units.

Want Accutire MS-4021B Digital Tire Gauge Discount?

I found the tire gauge readings to be accurate, and initially this meter was easy to use and quick to take a measurement.

However, within 5 months, the plastic part of the gauge that you put onto your tire had deformed to the point that it would no longer take a reading from a tire. I do not work at a mechanical shop, and I have one car and I had taken a reading about once a week for 4-5 months.

I would not recommend this product.

Save 22% Off

I've owned two versions of this gauge: An LCD version that I bought 7 or 8 years ago, and the more recent LED type. Aside from the display technology, they looked identical.

They were both accurate and reliable, but they both also had very poor sealing against the tire valve. The rubber ring that seals against the valve is too hard and uneven. You have to line the gauge up very precisely, and press very hard to avoid a burst of air escaping from the tire. If you don't get a good seal, the reading can be off, and a couple of bursts of air is enough to drop a tire by 1 psi. Every time I checked my tires, this happened on at least one or two of them. It's bad enough that I got into the habit of overfilling the tires by a couple of psi so that when this happened I would not end up below the desired pressure.

I finally got tired of it and bought a $26.00 gauge at Sears that seems to be just as accurate and does not have this problem.

Emglo E810-4V 4-Gallon Heavy-Duty Oil-Lube Stacked Tank Air Compressor

• Oil lubricated pump with cast iron cylinders provides over 1500 running life hours
• 4.0 SCFM delivered at 90 PSI pump, 4.0-Gallon tank and 125 max PSI enables more nails to be fired and provides quicker recovery
• Dual soft start valves assist in cold weather start up
• Universal push-to-connect coupler for ease of operation
• Utilizes Emglo's 50 years of expertise in air compressors

I've been using this air compressor for about 3 weeks now for installing trim with 16 and 18ga. nail guns and it has been great. It goes from 0 to 125psi in 75sec. When it kicks on during use, it takes less than 15sec to refill. It is a little louder than I expected, but runs so briefly that it's hardly an issue. Also, it's fairly heavy so I set mine on a furniture dolly and just roll it around. So far, I'm very satisfied with my purchase and would recommend it to others.

Buy Emglo E810-4V 4-Gallon Heavy-Duty Oil-Lube Stacked Tank Air Compressor Now

This thing is great it's a little heavy but only cuz it's constructed well, the fill time is less than 1min

Read Best Reviews of Emglo E810-4V 4-Gallon Heavy-Duty Oil-Lube Stacked Tank Air Compressor Here

This compressor didn't work right out of the box. It won't build pressure over 20 lbs. Emglo's custumer service was terrible. I have a similar compressor that has preformed well for 20 years. The new cold start provision is what is causing problems. After repeated calls to emglo's customer service they are supposed to send me a part to fix this.

Want Emglo E810-4V 4-Gallon Heavy-Duty Oil-Lube Stacked Tank Air Compressor Discount?

The compressor works great. Seems to be very well made. The air release valves are much nicer and easier to operate than my older model. Refreshes quickly and holds its air with virtually no seepage.

Save 47% Off

I was hesitant to buy this portable compressor when reading the reviews regarding cold weather since my construction project was in the dead of winter. I had a similar experience.with not turning on, sluggish starting, etc.

HOWEVER, I noticed when I shortened the extension cord powering it and lengthened the air hose it solved the problem. The draw (amps) seemed to be the issue at least for me.

Black & Decker ASI500 12-Volt Cordless Air Station Inflator

• Cordless 12V battery fully charges in 4-5 hours
• Can inflate tires, rafts, mattresses, pool toys, athletic balls, etc
• Features digital gauge that measures pressure accuracy within +/- 1 PSI (pound per square inch)
• Quick connect hose with on-board accessory storage
• Can inflate 4 full sized car tires from being completely flat in 1 charge

This compressor/inflator is very attractive. It is also lightweight and all the accessories with the exception of the charger store right on the unit.

I have owned compressors and I have owned high volume inflators. However, I have not owned a unit that includes both functions, and none of my units have ever been cordless.

Mounted on the front of the unit are three connectors for inflatables and balls. The high volume hose has a large connector and there is also a high volume adapter for pushing in the internal flap of some inflatables. On the front is an LED light for working in the dark.

The digital dial is bright and easy to read both in daylight and at night, and it has a sleep mode to save battery life.

Right out of the box, I see nothing but perks.

THE OPERATION

Operating the pump was not intuitive. First, I hooked up the pump to the tire and pushed the power button. That is the logical thing to do, and all my previous compressors have worked that way. Nothing happened.

I read the manual and it said first, I need to press the button to choose the compressor function or high volume function. Then, I need to press the "+" or "-" button until the pressure reading flashed "0," and then press the "+" or "-" button until the pressure reading was what I want.

It was a task to have to keep pushing the "+" button down repeatedly, especially when I need to go from "0" to "80." There was no way to advance the reading by using continuous pressure. It was just push-push-push. Then and only then do I push the power button to start the inflation. Once the desired pressure is reached, the power turns off automatically.

The operation is not difficult once I learned the steps, but it is not intuitive. I recommend storing the manual and the compressor together for others to reference, just in case.

BATTERY LIFE AND CAR ADAPTER

For the first run, I charged the battery as instructed for five hours. With that charge, I was able to inflate 1 truck tire, 4 minivan tires, and 4 children's bike tires over the course of three days before the battery died. (Note that none of these were inflated from a fully deflated state.)

Afterwards, I tried using the car adapter. The cord is conveniently wrapped to the bottom of the unit. It was long enough to reach to the back tires of my minivan.

I tried running the unit of off the charger plugged into the outlet, but the unit would not run. If I am not near my car and the unit is out of batteries, I am out of luck.

HIGH PRESSURE

The manual states that for pressures above 100 PSI, the compressor must not be operated for longer than 10 minutes at a time and with 20 minute breaks between usage. I did not find the maximum capacity listed in the manual or on the box.

I did test the unit up to 84 PSI and it functions well. The only problem is it's difficult sometimes to unhook the nozzle from the valve, so I have air escaping. So much air escapes that when I inflate to 84 PSI, by the time the nozzle is unhooked, there is only about 78 PSI left in the tires. To get 36 PSI in my minivan tires, I need to inflate to 38 PSI. The workaround is to over inflate the tires.

The compressor can be used as a pressure gauge. Just hook up the nozzle and the pressure reads on the digital dial.

HIGH VOLUME

I inflated some of my children's inflatables and found high volume inflation to be quick. The inflator also will deflate the toys.

One thing to note is the auto-off feature will not work with the high volume inflation. There is no pressure gauge function when high volume inflation is selected.

LED LIGHT

This is a simple yet useful feature. It is bright enough to help when working in the dark. Its operation, like other functions of this compressor/inflator, is not intuitive. There is no on/off button. I must first select the compressor or high volume mode and then press the power button and then the "+" or "-" button twice.

PROS:

+ convenience of compressor and high volume inflator in one unit

+ cordless

+ has a car adapter with a long cord

+ auto shut-off compressor

+ 4 nozzle adapters included

+ will deflate inflatables

+ LED light

+ easy to read dial

+ unit has a sleep mode

+ can be used as a pressure gauge

CONS:

unintuitive operation

will not operate off of wall outlet

automatic shut-off does not function with high volume setting

short battery life

must overinflate due to loss of pressure when disconnecting nozzle from tire

SUMMARY

This is a great unit. It looks beautiful and performs well. I did not find it any louder than the other compressors I have owned. The only problem is the (lack of) ease of use. The elderly may be easily confused by it -or any young person without a manual for that matter. If you don't mind reading manuals, this unit is wonderful.

UPDATE: Due to a comment on my review, I went back to retry the air station pressure setting. I was incorrect in one of my initial observations. The pressure settings can indeed be set by pressing and holding the "+" or "-" buttons and I do not need to press-press-press my way up to 36 pounds.

Buy Black & Decker ASI500 12-Volt Cordless Air Station Inflator Now

UPDATE 3/23/11: Died. Simply won't work anymore. It's been charged, plugged in to the car accessory port, and the thing simply will not turn on. The digital readout just blinks. Very frustrating. So I guess the lesson here is: don't buy! Changed my 3-star review to 1-star to reflect the failure.

Original review 2/2010: For whatever reason, I have amassed several portable air pumps over the years, apparently attempting to get the "best" one. I've decided there simply isn't one. This one is close, but suffers the same problem my other battery-operated pump had: it HAS to be charged for it to work, and for it to be charged, it must be plugged into a wall socket for a number of hours. Adding to this is that the unit comes with a cigarette-adapter plug, which aids in powering the unit while running the unit (the other battery-operated unit need this too.) To fill all four car tires, it's pretty much a necessity to make use of the adapter.

Operation is confused a bit as one must first determine the end pressure, with the unit not connected to whatever you are filling. First you must flip the switch on the right portion of the "U" shape of the unit, push to the right for low pressure items like tires or to the left for high pressure items like soccer balls, etc. Middle is off. Under the digital display in the middle are three buttons, the center one to turn the compressor on, the right one to advance the pressure and the left one to decrease the pressure. I found that once the pressure had been started with either button, holding it down would allow for rapid advancement, making high numbers much faster and easier to reach than pressing the button many times. Once reached, simply let it set a moment, then attach the hose. Only *then* do you hit the power button and it will fill by itself. It seems complicated, but once you've done it a couple times, it's not so bad. (Pro-tip: in dark situations, press one of the pressure buttons and an LED at the front will light up the area a few feet in front of the unit. Handy!)

The unit's biggest downside has been disconnecting the nozzle from tires. I don't know if it's my tires in particular, but the nozzle holds onto the valve stems with a death-grip. It should be simple, just flip the lock up and pull back, but what really happens is you pull the lock up and psssssssshhhhh you've just lost 2-3 pounds of air while fighting with the nozzle. I physically have to brace myself, preparing to flip the lock and pull with all my might to get it off the stem as quickly as possible. Most of the time I find I have to refill my tires a couple of times before I get it off the stem properly. Frustrating, to the say the least.

The digital readout is excellent. The preset pressure is a great way to ensure you get exactly what you want in whatever you're filling. The battery issue is annoying, but livable many other units are just like this. The valve stem problem is just that, however, and it might be a deal breaker if I can't get it worked out. It's really too bad because I like the pump in general.

Read Best Reviews of Black & Decker ASI500 12-Volt Cordless Air Station Inflator Here

I have been using Black & Deckers ASI300 Air Station for over a year and can safely say that the ASI500 is a much better product. The one marked area of improvement is that the ASI500 is cordless. No more need to drag an extension cord around the car. After reading through the manual, and using the ASI500's digital pressure gage, I checked the tire pressure on one tire. After some trial and error, I was able to go through setting the recommended shut off pressure on the digital gage and inflated our van's tires. I was able to test the claim Black & Decker make about being able to fill four tires on one charge. Without charging, and using only the out of the box factory charge, this was accomplish leaving very little power to spare. I'm guessing that after a full charge the claim would be easily achieved. The ASI500 air station is very compact and easy to carry around. It has all the accessories for car, truck, bicycle, air mattress and all the sports balls. The unit comes with a charger as well as an attached 10 foot cord with 12 volt plug in adapter. All the accessories are nicely fitted on the unit for ease of use. One very nice feature is the small yet powerful light on the front of the unit that makes for easy night tire checking and inflating. This would make a great gift for anyone to add to the trunk of their car for road side emergencies. There are a few things to keep in mind with the ASI500. The first is that the air hose adapter is made of hard plastic and could break if forced. The second thing is the need to have a separate air pressure gage to check the tire pressure after inflating. I found that the AI500 was around 2 psi over the setting and I needed to release some of the air out of the tires. However these are quite minor issues. It took me around 15 to 20 minutes to fill all four tires to their proper psi. This was a bit faster than my old ASI300. With gas stations charging around a dollar for air, this is highly recommended for the home garage and those camping, biking, or vacation trips.

Want Black & Decker ASI500 12-Volt Cordless Air Station Inflator Discount?

Got my product today, read the instructions, charged it up, unplugged it, and turned it on. LCD displayed ERR. Went to B&D website for support, it told me that division was sold to Baccus Global.. went to their website, only units with jumper cables are listed.. not this unit or anything close to this unit.

So, I called Black and Decker. They first asked if I turned it on when it was plugged in. I don't think I did, but it would be a rather simple mistake. She acted like I might have killed with such a simple action. I said 'no'. She said that it can't be fixed and I had to take to the local authorized service center for a replacement. That service center was 25 miles out of my way. I called the service center, they told me they would replace my hours old product with a refurb.. and by they way, they don't stock them so it may take 4-8 weeks.

I fiddled with the compressor and re-read both the paper instructions and the instructions at blackanddecker.com. Note: they were different (whatever that means). The on-line version indicates you can inflate a tire without setting a max pressure whereas the printed manual didn't.

Regardless, I actually managed to get a non 'ERR' screen, and actually managed to get it in PSI instead of KpA. I inflated exactly one motorcycle tire, and it worked flawlessly. However, the battery, which did charge for 4-5 hours, was flashing that it was nearly dead after only one motorcycle tire.

I plugged it in (making sure the unit was turned off first so I didn't destroy it) and walked away. Unplugged it, turned it on to see how it was, etc. I got the infamous 'ERR' on the screen. I turned it off and on several times until finally I did not get the 'ERR' display. Cool... that's not that bad. A little inconvenient, but hey, I can turn it off an on 10 times. I hooked it up to a tire to get a reading and it read something like 700 KpA I Don't deal with metric KpA, so I tried to switch to PSI. No luck. I followed the instructions to the letter and hit the + and keys at the same time. I tried hitting them many times, holding them down for a while.... no luck. Seems stuck in KPA forever.

I disconnected from the tire. Turned the unit off, walked away for a while. Unit is charged up, not plugged in, and not connected to a tire at this point. Turn it back on, and it is taking a pressure reading of my garage of 770 KpA.

Bottom line: This unit seems flaky (at best), and I'm at my wits end. There is a 1 year warranty on the product from B&D, but I have decided to return the product and go with a simpler battery inflator with less bells and whistles. I'd hate to think that if I hit the off/on button (not the compressor run button) while plugged in that I might freak this unit out. I just get the feeling that if I got a new unit, and it worked perfectly, that it would flake out after 13 months.

Thanks to Amazon for treating customers better than the manufacturers do. I have purchased hundreds of items at Amazon, and I believe this is my first return. After dealing with B&D, I don't know if I'll ever buy a B&D product again.

One more thing: If the air hose was 6 inches longer (like my old inflator), it would be much more useable (if you get one that's not flaky). To get to a motorcycle tire over exhaust pipes, I had to hold the inflator in the air as the cord would not allow the unit to sit on the ground.

Sorry for such a long and 'sob story' review. This has got to be my longest review yet.

Save 57% Off

I really love this air inflator/high volume pump. It's cordless and very powerful.

It can be used to inflate pretty much anything including automobile tires, bike tires, beach balls, rafts and so much more. I own another air inflator that you have to plug into the cigarette adapter in your car and it's a pain and it doesn't have the power to inflate automobile tires unlike this air inflator. This air inflator has plenty of power. It quickly inflated my car tires to 35 PSI and the manual claims that it has the ability to inflate up to 100 PSI, which is much more pressure than I will ever need to utilize.

The air inflator will take about 4 hours to fully charge the first time but then it's so convenient to carry around and not worry about pesky wires. The power cord has a light on it that will be red while charging and will turn green once fully charged. It also has sleep mode that it will go into if it's not used within two minutes. This helps to preserve the life of the rechargeable battery. It also has a built-in 12-volt vehicle charging cord that plugs into the cigarette adapter in your automobile. This allows you to recharge the battery while on the road. There is a blue LCD panel on the top of the inflator. First you set the desired PSI and then begin inflating. It will monitor the PSI and automatically stop when you have reached the chosen level. You lose a small amount of pressure while removing the inflator hose so I normally inflate an extra 1 or 2 PSI due to that fact.

The air inflator also has a built-in LED flashlight that comes in handy when working outside in the dark or in a dark garage. It also has built-in nozzles and hoses that are used to inflate other things

I love this air inflator & I would recommend it to all.

Honeywell DP2030C5010 - Definite Purpose Contactor, 208/240 Vac 2 Pole

• Provides switching for starting of induction motors.
• Shrouded coils on 3 pole (25A to 60A) models protect the coil from harsh environment factors.
• Silver cadmium oxide contacts provide long life under demanding duty cycles.
• Low profile design allows for more wiring room.
• Multiple mounting holes and slots for convenient, interchangeable mounting with competitive devices

The product arrived promply, well packaged, and was received undamaged.

The product was as described.

The vendor, Plumbing Planet, is excellent!!!