C.R. LAURENCE SG70038 CRL Air Filter, Regulator, and Lubricator

• Operates from 0-160 PSI
• Includes Oiler
• 1/4" NPT Fittings

At 135lbs it does leak slightly from the plastic cap on top center between two polycarbonate bowls. I lose about 5lbs an hour. Set the line pressure but depending the pressure in compressor, the line pressure can vary and not stay stable. Better than some cheap ones i've had, if I wanted to spend $200 plus i'm sure I could find better.

Stanley Bostitch BT1855K 18-Gauge Brad Nailer

• Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
• Selectable trigger system: easy conversion between sequential or contact modes.Trigger lockout mode for use when working in occupied spaces
• Dial-A-Depth control: quickly and conveniently set fasteners to desired depths
• Swivel air fitting: increased maneuverability.Filtered air inlet for improved engine durability
• Reversible belt hook: with integrated pencil sharpener for ultimate convenience

This is a excellent brad nailer, enough people have said nice things about it, I'm really writing to make one warning:

I'm actually on my second unit, the first was destroyed by one of my guys who apparently didn't clear a jam properly. I've only ever had it jam one time in my own hand after maybe 6-7K shots, and it only jammed because of a screw behind the molding. But when this thing jams, wow is it a hell of a jam.

If the jam occurs with a brad partially through the nose and the hammer did not retract DO NOT pull the jammed brad out with a pair of pliers. Because the hammer itself is semi-exposed, yanking on the jammed screw will likely tweak it and it takes an EXTREME amount of force to pull it out (the one time it happened to me the nail was curled up inside and outside). This is what it looks like one of my guys did as evidenced by the gouging in the metal portion of the magazine, unfortunately whatever he did managed to destroy the internals of the driver portion as well.

Instead take the included hex key out of the included pencil sharpener/belt hook and disassemble the head. After I cleared the jam the hammer did not automatically retract like on other nailers I've used. Hesitantly I put everything back together, connected the hose and dry fired it and the hammer resumed normal operation (warning I do not know for sure if this is the "correct" way to return the hammer to it's normal operating position).

Seriously though this unit practically never jams, especially compared to some other brad nailers I've used, it's a great unit and I highly recommend it. On the odd chance it does jam, show it some love and don't just start yanking at it.

Buy Stanley Bostitch BT1855K 18-Gauge Brad Nailer Now

I ordered this product for a weekend home improvement exterior trim project and it was a great time saver. I got both this item and the 16 Ga nail gun at the same time. This one has the better design for loading the nails, although the other nail gun's nail size is better for sturdier exterior fastening. This 18 Ga gun is probably best for interior trim work. A window in the cassette to help see the size nails or when you are close to running out (prior to climbing to the top of a ladder...) would be a handy addition to this product. This nail gun is very lightweight, the belt clip is good, and it did not jamb once. Highly recommend this to anyone.

Read Best Reviews of Stanley Bostitch BT1855K 18-Gauge Brad Nailer Here

I have only owned Porter Cable nail guns in the past, but with all the features the next generation of nailers offers, I had to try the 1855K. Finally, a brad nailer that will shoot 2" nails! Very convenient, and nice to leave only a tiny hole on your finish carpentry work.

Other great features include rear muffled exhaust, oil free operation to prevent staining fine finish work, swivel air hose fitting, belt hook with pencil sharpener(sounds hoakey, but actually quite useful), light weight magnesium body, easy side-load nail clip, any dry-fire feature won't let you fire unless brads are in gun, low-nail indicater, opening in magazine to see length of fasteners being used. Great product that will not dissapoint.

Don't buy the air compressor kit with three guns they are not the same models. Guns appear much cheaper and magazine is not nearly as easy to open to load nails. The kit guns are cheap junk. The 1855k is a quaility tool. Price is great.

Want Stanley Bostitch BT1855K 18-Gauge Brad Nailer Discount?

I purchased this gun only because a partner purchased the wrong nails for my other Bostitch gun , so rather than throw out the nails you had a awesome deal on a gun. You have a new customer, Thank you for the price I paid awesome gun.

Save 11% Off

I puchased 2 of these guns, and 4 months later both started acting up. Will not fire at all, with no visible signs of O-ring wear, etc.. Now at 5 months later both guns are completely dead. I am returning these and will never be purchasing bostitch again. Their customer service offered to tear it apart to look at it, which leaves me down 2 brad nailers for over a week. NOT HAPPY, BUY AT YOUR OWN RISK!!!!

Hitachi EC89 4 Gallon Twin Stack Air Compressor

• 4 Gallon Twin Tank
• 13 Amp Direct Drive Induction Motor
• 3 CFM @ 90
• Only 57 pounds
• cast iron cylinder for extended life
• 13-Amp direct drive induction motor for efficient and reliable performance
• Cast iron, oil lubricated pump for cooler operation and greater longevity
• Comes with a 1-year limited warranty
• Lightweight for easy jobsite transport
• Manual reset thermal overload protection stops the motor in case of overheating

I have had this A/C for years and never a start issue, even at 30*F, but I use their spec.for oil, synthetic diesel type. NOT 30w. Rotella Shell 6T is the best. Use tha in all my A/C's. That is why the bad review . Also you need a 12ga or larger ext. cord if you are using one. 4 stars b/c the design could be better, no roll cage,gauge panel... hard to add filter and extra QD's without them sticking out and almost ensuring damage.

Buy Hitachi EC89 4 Gallon Twin Stack Air Compressor Now

I bought a Hitachi compressor to run a nail gun while replacing my garage roof. The salesman told me his personal experiences had been good with the same model. When running my unit seemed adequate for the job at hand. It was the running that was unreliable. The compressor was extremely sensitive to cool temps failing to start and tripping the thermal overload shutoff. If the unit was left in the garage overnight in mid 40 degree temperatures it would not start. The temperature was never even close to meeting the low temperature range advertised. The starting problem continued to get worse to the point it would rarely start even warm. Another problem developed where the unit would shut off well before reaching the upper pressure limit of 135 PSI. The performance was entirely unacceptable.The Hitachi authorized service center has had the unit for three months and has been unable to get parts for the repair. The first unit failed in a similar way and I got a like replacement within 30 days. The second unit started to fail the same way and I should have brought it back inside of 30 days.

Read Best Reviews of Hitachi EC89 4 Gallon Twin Stack Air Compressor Here

Purchased this exact model in 2002. I use this for cabinet and trim install. Works excellent with 15-18 ga nailers. Even use occasionally for my air drill when installing cabinets. Will turn on after each hole drilled but still maintains enough pressure for light use with this type of tool. This unit lasts. I have used it at least 1200 hours and my regulator went bad( from me banging it in to stuff) and its not worth $100 for the switch assembly( toolpartsdirect). I am only replacing because I get a new compressor for $195. Brand new for $95 more. () Anyway, this is a great buy, considering similar model are $250+ and the oiled cylinder will stay clean and maintain good compression as long as you change the oil once or twice a year depending on usage. Great for home enthusiast, good for commercial/construction.

Want Hitachi EC89 4 Gallon Twin Stack Air Compressor Discount?

i am a roofing contractor so i shoot millions (literally) of nails. don't know about the cold weather issues, can't say on that i am in SoCal but i can tell you that these little Hitachi electrics are the best out there. I've used Campbell Haus, Husky, Dewalt, Rigid, POrter Cable the list goes on. Right now i have around 12 compressors.

one of the best ones, for small electric units, are the Hitachi.

I have a pile next to our tool room of broken Campbells and others and for sure don't buy the Husky total garbage (I've got 3 of those in the pile, they cannot be fixed).

Campbell Haus used to be american made, in fact i have a 12 year old gas unit up until last year when it finally catostrophically failed. now of course they are not american made.

If you even take these other models to a compressor repair company they wno't fix them for you. The hitachi can be repaired and it's worth it, usually.

If you want your compressor/tools to last get a good in line filter and water remover (when air compresses, it gets very hot, condenses water vapor and you get water in the line, the tank, your tools, etc). A decent filter can run $50.

if there is a compressor out there "made to work in freezing temps" i've never seen it advertised and i suspect there isn't muich diff between them in that regard but can't say for sure. didn't realize it was a problem, i admit but saying these htiachis are junk, not so, i can assure you.

Save 57% Off

First off, this is a nicely made machine from all appearances and my out of the box feeling was total satisfaction. It worked well enough, about what you would expect, I was perfectly happy. I spent extra to get a nice tool that I could have for a long time. Unfortunately it will not run when its cold out side. It just trips the breaker, I can get it to run if keep resetting the breaker (like five or six times or more in a row, it take 15 minutes or so to get it running). When I called Hitachi at the supplied number a very easy to talk to man told me that none of the Hitachi air compressors will work in temperatures less then 40, its just the way they are designed! He suggested that I keep it inside and only take it into my shop when I want to use it! Its too bad that they apparently build things just good enough to work under ideal conditions. Do not buy this unless you live in the tropics. Hitachi has lost me as a customer forever! Total junk that cost me over $200. Never again.

Campbell Hausfeld HU502000AV 20-Gallon ASME Air Compressor

• 20-Gallon air tank
• 1.3 HP electric pump
• 150 max PSI
• Low-maintenance oil-free pump
• Easy to access gauges and knobs

When I received the compressor and opened the box, the compressor housing appeared to be cracked and broken in a couple places and the compressor/motor assembly was loose on the tank. After inspecting the item it looked like the black plastic housing was indeed damaged. I called the company and gave them information and they said they would send a new housing, which did arrive about 10 days later. When I went to replace the housing assembly which required removing the compressor/motor assembly from the tank, I discovered that the cast aluminum frame of the assembly was broken off at the corners. This unit was obviously dropped on its top either before it left the warehouse or in transit. I have since been in contact with Campbell Hausfeld customer service at least 3 times now by way of email or by phone call and to one person in particular. This is becoming a classic case of "I'll get back to you later today" and they have not except for the first response. The customer service representative has said she needs to "check with her boss" about this. I frankly don't see what the hold up is. I sent her pictures of the broken assembly, and have asked that they send me a new one, since it is a part that is clearly shown on their parts diagram of the compressor. Campbell Hausfeld needs to make this right. I have tried to be patient in waiting for their action, but its going on a week now since I made the call.

Buy Campbell Hausfeld HU502000AV 20-Gallon ASME Air Compressor Now

This is a simple review the unit was delivered with metal brackets broken off inside the plastic houseing called the local dealer and was told it was the shippers problem.to get the unit out had to cut the box off and was unabie to return.

Read Best Reviews of Campbell Hausfeld HU502000AV 20-Gallon ASME Air Compressor Here

Still working well so far. Keeps good pressure and doesn't lag too much even when using a large blowgun with it. Great for a homeowner's occasional use.

Want Campbell Hausfeld HU502000AV 20-Gallon ASME Air Compressor Discount?

Does exactly what I need it for, the occaisional ball or wheel fill and can handle any house or shop project requiring an air sprayer or nail gun. Uses less space due to the upright orientation, and I love the brass drain fitting that won't be caked with rust in a year or two. Oil-free for easy intermittant usage, about as quiet as an air compressor can be. I read a few reviews about shipping damage or arriving in poor shape, but I watched and noted everyting (I uploaded photos about the packaging). It arrived with some of the internal foam chewed up but after vacuuming up the krinkles in the box, I pulled it out, put in 4 screws for the handle, and attached the two wheels, fired it up and it ran to full pressure and cut off with no leakage or issues. Slick little unit with enough oomph for slightly larger jobs but small enough to tuck away in the garage. I also like the really big Rubber Bumpers on the rest to keep it from rattling or moving when running.

Bought this at Lowes floor person had no idea what he was talking about but bought it in spite of him. Easy set up f or 1 person works as promised. Don't miss instructions on break in. Takes a lot of power cant have lights on in garage or it doesn't run right. Overall I would recommend.

Tool Aid (TA 98500) In-Line Automatic 1/4" NPT Air Tool Oiler

• Sold Individually

I found the oiler well made and worked without any leaks. Following the instructions, filling it with a pointed oil bottle was easy. Unfortunatly I ordered this tool after completing my backyard project so the test consisted of shooting a few 3" nails @ 110 PSI and I had no issues. After the three round burst I noticed that the oil level changed a small amount indicating it was dispencing oil into my air tool. Not sure if contractors use these, but if so I can see having several filled and standing by for large jobs. I'm very satisfied with this purchase.

Buy Tool Aid (TA 98500) In-Line Automatic 1/4" NPT Air Tool Oiler Now

This item sounds good oil your air tool, instead of the alternative of using an airline oiler (where the whole line gets oiled before the tool). In practice this unit DOESN'T work properly. I installed the 2 oilers just as the directions described, but they both leaked like crazy. What a waste.

Ingersoll Rand 2130 Protective Tool Boot

• Keeps tools clean and protected
• Bright red color makes it easy to locate your tool in a busy shop

The boot I got is black, and not the red one in the picture. Amazon should update the picture. It seems to be quite durable so far, and is a tight fit. It took some stretching to get it on.

Buy Ingersoll Rand 2130 Protective Tool Boot Now

Ingersoll Rand 2130 Protective Tool Boot

Contacted Amazon to have the picture changed from the RED boot to the correct BLACK boot picture.

Very happy with this purchase and included some pictures of it installed for your reference.

A very tight fit indeed but would not want it any other way.

Buy this tool protector with confidence.

RagenRat :0)

Read Best Reviews of Ingersoll Rand 2130 Protective Tool Boot Here

Does what you expect, fits well and protects the tool. You don't even really know its there it fits so well, except around the reverse switch. Color on mine was black, read carefully when ordering as red is shown.

Want Ingersoll Rand 2130 Protective Tool Boot Discount?

Purchased this boot for my Ingersoll Rand 2130 impact wrench and it works great. Like the previous users mentioned the boot fits very snug. I heated up the boot with a 1500w hair dryer about 10 seconds to soften up the boot plastic a bit and it made it much easier to work it onto the impact gun. Once on it is indeed very snug and the protection it offers is worth the additional cost.

Bought this to fit over my 2130 ingersoll rand impact gun. Fit was great and protection will be great,too. Covers the gun great and yes the fit is tight,but needs to be other wise it will not protect like it should and with it fitting loose you will fighting it being in your way. Yes I would recommend this.

Emglo E810-4V 4-Gallon Heavy-Duty Oil-Lube Stacked Tank Air Compressor

• Oil lubricated pump with cast iron cylinders provides over 1500 running life hours
• 4.0 SCFM delivered at 90 PSI pump, 4.0-Gallon tank and 125 max PSI enables more nails to be fired and provides quicker recovery
• Dual soft start valves assist in cold weather start up
• Universal push-to-connect coupler for ease of operation
• Utilizes Emglo's 50 years of expertise in air compressors

I've been using this air compressor for about 3 weeks now for installing trim with 16 and 18ga. nail guns and it has been great. It goes from 0 to 125psi in 75sec. When it kicks on during use, it takes less than 15sec to refill. It is a little louder than I expected, but runs so briefly that it's hardly an issue. Also, it's fairly heavy so I set mine on a furniture dolly and just roll it around. So far, I'm very satisfied with my purchase and would recommend it to others.

Buy Emglo E810-4V 4-Gallon Heavy-Duty Oil-Lube Stacked Tank Air Compressor Now

This thing is great it's a little heavy but only cuz it's constructed well, the fill time is less than 1min

Read Best Reviews of Emglo E810-4V 4-Gallon Heavy-Duty Oil-Lube Stacked Tank Air Compressor Here

This compressor didn't work right out of the box. It won't build pressure over 20 lbs. Emglo's custumer service was terrible. I have a similar compressor that has preformed well for 20 years. The new cold start provision is what is causing problems. After repeated calls to emglo's customer service they are supposed to send me a part to fix this.

Want Emglo E810-4V 4-Gallon Heavy-Duty Oil-Lube Stacked Tank Air Compressor Discount?

The compressor works great. Seems to be very well made. The air release valves are much nicer and easier to operate than my older model. Refreshes quickly and holds its air with virtually no seepage.

Save 47% Off

I was hesitant to buy this portable compressor when reading the reviews regarding cold weather since my construction project was in the dead of winter. I had a similar experience.with not turning on, sluggish starting, etc.

HOWEVER, I noticed when I shortened the extension cord powering it and lengthened the air hose it solved the problem. The draw (amps) seemed to be the issue at least for me.

Vacula 20 Inch Bent Tip Outlet Tube VAC720201260

• 1 yr warranty on material and workmanship

This thing works fantastic, and continued to work fantastic, until I stepped on it and cracked the plastic. You really gotta have a good grasp before pulling the trigger or it'll jump out of your hand. Construction is better than the ones AP sells, which needs the trigger valve o-ring replaced from time to time but, comes in bright colors, which helps with stepped on and loss prevention.

Save 83% Off