LF10-4H

• 95-125 psi factory preset regulated, you can regulate as you need between 35-150 psi
• ¼" COMPRESSION UNLOADER VALVE
• ¼" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1/4" PORTS
• 20 AMPS
• Corrosion Resistant and Non Metallic Cover

The switch was everything it said it was in the ad . I installed it on a craftsman comp. it worked beautiful, I love it.I would definitely do bussiness with them again.

Buy LF10-4H Now

product is exactly as represented. not sure why i need more words but apparently more words are "required" for a rating?

Read Best Reviews of LF10-4H Here

They should ship this with adjustment instructions. There are two adjustment screws, one for the cut out and one for the differential. They are not marked and there is nothing to tell you which is which. Don't get me wrong, you will figure it out, but it would be nice to have an instruction sheet with it.

Want LF10-4H Discount?

The auto/off lever is a little short for how stiff it is, but other than that it works great! The only thing I would add is that it should have a diagram in it to tell what dirrection does what as far as the setting screws for high and low pressures. It was easy to figure out, but it would help.

This is just exactly what my husband was looking for. It fixed the problem and he is back up and going

Amflo 37L-72DB Red 300 PSI Rubber Lead-in Air Hose 3/8" x 72" With 1/4" MNPT x 1/4&#0

• Lead-In hose is essential to absorb the shock loads produced by air powered tools to the air hose coupler
• Shock loads transmitted directly to the coupler and plug damage the locking balls of the coupler leading to premature failure
• Maximum working pressure 300 PSI
• Display pack
• Absorbs the vibrations and pulsations from air compressors and air impact tools
• Providing longer life for the balance of the pneumatic system
• 300 PSI Red rubberlead-in air hose
• Hose diameter is 3/8 inch and hose length is 60 inch
• 1/4 inch MNPT x 1/4 inch FNPT fittingswith bend restrictors and ball swivel

This is a high quality air hose it's easy to work with and use. I'll buy more of this product thanks Amazon

Buy Amflo 37L-72DB Red 300 PSI Rubber Lead-in Air Hose 3/8" x 72" With 1/4" MNPT x 1/4� Now

Does what it is supposed to do. No leaks. No problems. Seems to be made of good quality materials.

Shop Fox D3281 Heavy Duty Blow Gun, 4-Inch Nozzle

• 4-Inch Nozzle
• 180 psi maximum pressure
• Solid die-cast construction

Bought 5 of these. Seem pretty good, however over-tightened one of them and base cracked. Confortable on the hand and easy to hang while not in use.

Buy Shop Fox D3281 Heavy Duty Blow Gun, 4-Inch Nozzle Now

No leaks, good quality, all metal body. I would buy again if needed. This was bought as a gift. word

Air Blow Gun Kit with 5 Interchangeable Nozzles

• The classic air blow gun - essential equipment for every professional and DIY workshop; 1/4" NPT
• Blow gun with over-sized thumb trigger, PVC-coated for comfort & firm grip; convenient hang-hook
• Includes 5 nozzles; soft rubber tip, metal tip, inflating needle, 3"-narrow & 4"-large tubes
• Interchangeable tips increase versatility from one gun; easy-to-handle for close-in or hard-to-reach
• Heavy-gauge steel construction for long service-life; chrome-plated for corrosion resistance

Got what the picture shows but the gun had NO threads to screw in the attachments...useless. No response from the company to my e-mail to fix the problem. Because it was such a cheap item to begin with I won't pursue the matter BUT I will remember the company and not purchase their products in the future.

Buy Air Blow Gun Kit with 5 Interchangeable Nozzles Now

Hi All.

This item is very poorly made. As soon as I took this air-gun out of the package, the trigger on it bent. I was able to straighten it back out, but I doubt very much this item will hold up for very long, or for very little use.

Read Best Reviews of Air Blow Gun Kit with 5 Interchangeable Nozzles Here

A Small usuage kit ideally used for small applications. Well made and should last user many years with proper care.

Want Air Blow Gun Kit with 5 Interchangeable Nozzles Discount?

The attachments on this blower are great. I like the long nozzle for cleaning out my Computers, the computers I work on and any of my old dusty electronics. I've had no issues with this item or it's durability, but I use it in a very light duty environment and not at some hard working construction site or machine shop.

I would buy this again and use it about once a week to fend off dust!

Save 39% Off

The only thing I was a little disappointed with is the smallest (thinnest) attachment is not a needle nose. But I looked at the description again and it doesn't say needle nose so I give it 5 stars. The attachments are very well made. The smallest attachment does fit (very tightly) into my soccer and basketball though. Good product.

Goodyear i3000 12-Volt Tire Inflator

• High pressure 12 Volt portable inflator
• Inflates 14 inch vehicle tire from 0-28lbs of pressure in under 7 minutes
• Designed to inflate vehicle, ATV, motorcycle and other tires
• Also inflates, soccer, basketball, football and other sports equipment
• Plugs into vehicle power outlet

This unit burned out very quickly. Not heavy duty enough for car tires. Might be okay for the occasional bicycle tire. I was very disappointed.

Buy Goodyear i3000 12-Volt Tire Inflator Now

We keep passing this from family member to family member. It's great to have on hand when you need it. Light weight. Works well. Glad to have it.

Grex AD12 Adapter, 1/8-Inch Male End to 1/4-Inch Female End

• Grex adaptor
• One end with 1/8 inches male threads
• Other end with 1/4 inches female threads
• Precision machined of metal for durability
• Electro-plated for a smooth easy to clean surface

I bought this thinking it was 1/4" NPT on the one end for using with a compressor, but its not. It's not pipe thread. Grex doesn't seem to make one. At least not 1/4" female. The description should be more specific. I gave it 2 stars because quality seems to be okay otherwise.

TEKTON 4570 Brass Air Regulator

• Controls Air Flow to Fine-Tune Performance of Sanders, Spray Guns and other Air Tools
• Easily Change Air Flow by Adjusting Thumbscrew Value Control
• Solid Brass Construction
• Specifications: 1/4-Inch NPT Inlet by 1/4-Inch NPT Outlet
• 90 Day Guarantee

This is a good add on to the air tool for slowing down a drill. Used it while drilling hard metal on vehicle frame .

Buy TEKTON 4570 Brass Air Regulator Now

I'm cheap. I have a cheap air drill that works great but does not have a variable trigger. As a result I keep burning up drill bits.

I'm also impatient so even if I did have a variable trigger I would constantly fight the urge to go at it full speed!

I purchased this along with a good set of bits so I can better control the speed of my drill. So far so good! I can turn the pressure down and just stay full on the trigger and not have to worry about burning up bits any more!

And the price is right too!

Read Best Reviews of TEKTON 4570 Brass Air Regulator Here

Does not shutoff air completely when fully closed. Compressor tank does not hold any air within a few minutes after it is shut off.

DeVILBISS AIR LINE FILTER/Water/Oil Trap w/50 Foot HOSE

• Devilbiss Finishline HAR-602 AIR LINE FILTER with REGULATED CONTROL UNIT
• Plus a 50 Foot 3/8" Goodyear Rubber Air Hose

Just as described. Had to buy a few fittings to mount. Would like to have had a fluid filled pressure gauge...that's easy enough to change out. That's personal preference. Item was purchased to remove water and regulate pressure for sandblasting and painting. Performs as expected.

Buy DeVILBISS AIR LINE FILTER/Water/Oil Trap w/50 Foot HOSE Now

I recently purchased a Ingersoll Rand air compressor 19CFM at 90PSI I needed a filter. I found this one it was the right price for my budget and so far has done every thing I have asked it to do, it removes the water for my sand blaster and it works as they advertized so far great product the only thing was had to get a cupping to adapt the hose no big deal, for the first time I got tired of sandblasting before I ran out of air and my nozzle never clogged due to moisture! The only thing I would do is purchase a spare \ replacement filter just to have.

Rol-Air 2 Horsepower 5.3 Gallon Bull Compressor FC2002HBP6

• Heavy-Duty cast-iron cylinder
• Splash lubrication to ensure longer pump life
• Overload protection with manual reset
• Mounted on dolly Cart With Wheels For Easy Maneuvering
• Factory tested safety relief valve

I bought the HBP6 to use for my home remodel nailers, including flooring, etc.

Day 2 the unit shut down and tripped the thermal breaker and would not run after resetting.

Phone support helped me diagnose the problem as a piece of assembly debris (small chunk of paint or glue) being stuck in the check valve seat so I was able to clear it myself.

Day 3 another problem, at the same location, the plastic overpressure line exploded from the fitting because it was installed without a metal insert inside the line (only had the ferrule). Phone support said they'd ship me the parts but they didn't ship them overnight, so I had to go rent another compressor for the weekend.

I hope that after this issue is resolved I'll get good service from this unit. But be forewarned.

I try to buy tools that last a long time that's why I didn't buy a compressor from the big box stores, but I'm not sure my strategy has paid off.

Buy Rol-Air 2 Horsepower 5.3 Gallon Bull Compressor FC2002HBP6 Now

I am 70 years old, and retired. All of my tools are for play, but I do like to buy the best!

I have a very large, and excellent, Quincy 2 stage upright stationary compressor, a very nice 5HP Quincy belt drive, slow speed, 20 gallon portable, an EC-12 Hitachi (getting quite heavy for me to lug around), and a very old Champion (wheelbarrow style).

This little Rol-Air is absolutely perfect for me.

I can lift it if I need to, but in most cases I can roll it instead.

Convenience is what this is all about, and in my opinion this little Rol-Air wins five stars for convenience.

Read Best Reviews of Rol-Air 2 Horsepower 5.3 Gallon Bull Compressor FC2002HBP6 Here

I haven't used it much but so far this seems like an excellent little compressor.

It arrived in a box that had been opened and once inside noticalby repacked. I don't think it was used, however, because the compressor itelf seemed fresh, without nicks or dings.

-It already had oil in it and ready to use.

-Shipping weight is 64 lbs, but it's not nearly that heavy. I weighed it at 55 lbs and it's a fairly easy lift.

-In reality it's not much bigger than the familiar PC pancake. The added size if any comes from the handle and wheels.

-It is very convenient to wheel around, no problem with stairs, etc.

-Build construction seems very solid and durable. It is rated CONTINUOUS DUTY: Good!

-It does NOT come with connectors or a hose. Oddly, the quick connect I installed on the air outlet touches the metal tube for the pump, making me suspect a rattle issue some day, but not so far.

-The On OFF switch is not convenient at all, but is very postive up and down.

-It's somewhat quieter than my prior PC pancake, but not much.

I think this is going to be a great addition to my tools, and a definite upgrade from the PC pancake which failed after using it three times.

Want Rol-Air 2 Horsepower 5.3 Gallon Bull Compressor FC2002HBP6 Discount?

No problems! the item shippped on time and is working well. From my experience I would definately recommend this company as one to deal with.

Ontario, Canada