Hitachi N3804AB3 1 1/2-Inch 18-Gauge Narrow Crown Finish Stapler

• 1/2- to 1-1/2-inch 18-gauge narrow crown stapler with factory installed air fitting for convenience
• Selective actuation switch to choose between bump fire or sequential fire modes; tool free depth adjustment
• Tool-less, easy to clear nose for quick staple extraction; magazine holds up to 130 staples for efficiency; no-mar tip; 360-adjustable exhaust
• Includes safety glasses, air fitting, hex bar wrenches, and case
• 10.3-by-2.3-by-9.2-inches; 2.3-pounds; 5-year warranty
• 360-degree adjustable exhaust
• Comes with a 5-year limited warranty
• Easy clear nose
• No-mar tip and fitting
• Tool-free depth adjustment

I've used many brands of nail guns with various prices and qualities. The Hitachi Narrow Crown Finish Stapler definitely one of the best considering the low price. Light, and easy to use, it also has a switch for single shot or bump action which is wonderful. Most homeowner will feel much comfortable with single shot and able to check how many staple left with exposed rail. With a short practice, most people can gain most of the control of this staple and use it with ease. It has no problem driving 1 1/2 into wood and I felt it doesn't use much of air pressure as my compressor stay quiet longer than some other nail guns with similar capability.

The only thing I don't like is the kit does not come with sample staples and lubricant. It is not that I don't have them at home but it means the case does not design with designated places for those. minus one star for that.

Buy Hitachi N3804AB3 1 1/2-Inch 18-Gauge Narrow Crown Finish Stapler Now

One thing I will add that the other reviewers did not mention is that this stapler packs a heck of a wallop. The power of this lightweight unit really amazed me.

The truth is, I did not know what to expect. I have never owned an air-powered stapler or nail gun. I planned to use this Hitachi stapler to put up kraft-faced insulation, and then later use it for trim work. Yeah, right. I loaded it with 0.50" staples. They went right through the paper tabs on the insulation and kept on going into the studs. I had to look hard to find them because they had been sunk so deeply.

I turned the air pressure down to 70 PSI, which is the minimum operating pressure and set the stapler's depth adjustment to minimum. No dice. Too powerful! I went back to using my Arrow T-50 Carpal Tunnel Syndrome Special.

I decided to get to know this little monster better. So I ran a test to see what it could do. I loaded it with 1.50" Senco staples and fastened a piece of 7/16" Oriented Strand Board (OSB) to some wall studs in about five seconds. Extremely impressive! I showed my science project to my wife.

She said, "Very nice. Now take it down. It looks terrible stuck up there."

I tried to pull the test piece off the wall with my bare hands, but it would not budge. Then I tried to pull it off with a 22 oz. framing hammer. That didn't work either. Finally, I had to use a 3-foot long pry bar. Geez, talk about embarrassing.

My last futile effort involved trying to recycle the test piece of OSB by attempting to extract the 1.5" staples I had shot into it. I won't tell you what happened except to say the OSB went into my woodstove, staples and all.

Here is a tip: Whatever you staple with this Hitachi stapler is forever.

UPDATE, October 2010: This stapler is still going strong. I have put up 1536 sq. ft. of 3/8" plywood using the stapler and have done various other jobs with it. I have run nearly 3000, 1 1/2" staples through the unit and have not experienced a single jam or other malfunction.

As for maintenance, all I have done is cleaned the unit with compressed air and sprayed some WD-40 on its moving parts. Of course, the stapler gets five to eight drops of air tool oil before each work cycle.

UPDATE August 19, 2012: Pushing 7500 staples and still going strong. One weird thing did happen about a month ago, however. I was happily driving staples into plywood when the sheet suddenly pulled away from the studs. At first I thought I was off the nailing line and just missed the studs, but then I got looking more closely at the staple holes and realized there were no staples in the holes! Yeah, I had run out of staples. I mistook the small indentions made by the stapler driving mechanism, about a sixteenth of an inch deep, for the staple heads.

Read Best Reviews of Hitachi N3804AB3 1 1/2-Inch 18-Gauge Narrow Crown Finish Stapler Here

The Hitach is a nice looking tool, light weight, and it is cool. When loading the bolt draws back and locks. Staples fit over the rail tightly, but slide smoothly, release button is easy to operate and positive (not sloppy).

The stapler needs at least fifty pounds of pressure, but will sink the 1.25 inch staples perfectly into pine at that setting. It uses little air, so the compressor isn't called on much.

In "automatic" bump mode this gun will shoot all day. I was stapling 3' lengths of chicken wire to a wooden frame. The gun has never jammed.

As much as I hate manual staplers, I love this tool!

It is a joy to use, and accurate. I highly recommend this tool.

Want Hitachi N3804AB3 1 1/2-Inch 18-Gauge Narrow Crown Finish Stapler Discount?

We needed to purchase another stapler for our custom cabinet shop. Wanted something durable, but light weight. We have had Hitachi brad guns for years and never had any issues, so for less then a C-note we got this unit.

Fits your hand well, easy to load and easy to use.

It has plenty of power pushing 1 1/4 staples into hardwood without any problems. It will be interesting to see how this unit holds up in the long run, all indications indicate no reason to be concerned.

Only negative that I have found is that you can't load two full clips of staples the magazine isn't long enough.

Save 54% Off

I bought this stapler reburbished. It came from Bigsky tools through Amazon. The stapler looked bran new, the storage case too. It works flawlessly. Very powerful. Best of all, no plastic parts on this baby. the magazine, holding the staples is all steel construction.

Dixon 11-009-081 Norgren Series Brass Water Pressure T Handle Regulator with Gauge, 27.5 GPM, 1&#034

• Water pressure regulator without gauge
• Non-relieving type
• T-handle adjustment
• 1" Port size
• Water service: 35 to 200 degree F; air service: -30 to 200 degree F

This regulator came within an acceptable amount of time. Since it was advertised as used, I was expecting to have to service/rebuild it before putting it into service. Much to my delight, it was in very new condition. I installed it the very day I received it. Great purchase and AWESOME price!

Save 34% Off

Makita T-00153 17-Piece Impact Driver Drill Accessory Set

• Compatible with UltraLok connector and standard drive drills
• Titanium coating reduces friction and increases drilling speeds in metal
• Split Point penetrates on contact preventing walking of the drill bit
• Features a pilot hole drill bit that quickly reverses into a driver bit by using the compact quad driver adaptor
• Accessories fit directley into an Impact Driver collet, Set comes in a folding carry case

This is an incredibly handy set that I am SO glad I purchased.

As I'm sure most people do, I think I have about 10 different accessory sets in my toolbox at this point and most of them are more of the same a bunch of #2 phillips bits, a bit holder and some assorted other driver bits. This kit has a few things that really make it stand out. #1, it includes 3 different socket sizes in it as well as an adaptor that allows you to attach any standard 1/4" drive socket to your driver. It also includes some very high quality drill bits in commonly used sizes, but the star of the show for me is the "flip bit." This is an incredibly cool little invention. On one end you have a #8 countersink bit and on the other you have a #2 phillips bit and with the included sleeve adaptor, you can switch between them within seconds which comes in EXTREMELY handy when doing finish carpentry.

I own a number of makita tools (including their outstanding LXT impact driver) and like all of those, this is top quality and I would recommend it to anyone who has an impact driver and needs a starter kit.

Buy Makita T-00153 17-Piece Impact Driver Drill Accessory Set Now

Shame on you Makita! The 1/8 drill bit broke on it's first use. The adapter that holds the drill bitphilips head wont lock down on the insert. I'm building a deck. I used the philips head and the deck screw broke the bit. Check your quality control...please! I love my 10.8 ion lithium impact and drill set. They're powerful...too powerful for your cheap bits. I waited too long to get a refund. Don't make the same mistake. Buy 'em, use 'em, break 'em (they self destruct) and send them back within 60 days. If enough of us to this maybe Makita will get the message and build powerful bits to match their machines.

Read Best Reviews of Makita T-00153 17-Piece Impact Driver Drill Accessory Set Here

my girlfriend got this set for me for christmas along with a drill and driver set. The first bit I used broke immediately. I was very dissapointed in the set. do not buy this product.

Want Makita T-00153 17-Piece Impact Driver Drill Accessory Set Discount?

I've been using the kit for a week for multiple jobs with a Makita Impact driver and a drill machine.

The drills are good, no wobbling.

The driver bits have worn out way too quickly for my liking. I think it's better to just get a set of low-medium quality driver bits with impact drivers.

My real gripe is the flip bit, the drill on it wobbles too much to make a quality drill. I could really see it being very useful, but because it failed so hard I had to use both a drill machine and my impact driver for my simple job.

Save 14% Off

I bought the Makita 3 piece drill set with lithium ion battery's which is a great drill set. So I figured the bit set would be great to. I used ONE bit for about 15 seconds on some cheap screws to hang some blinds and the bit was completely ruined. They obviously use the lowest quality soft metal to make these. I'm in construction and I have never seen a bit go to waste so fast. DON'T BUY. GET A DeWalt set instead.

LT5000D Lotos LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" clean Cut

• Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
• TOSHIBA Transistors (MOSFET)
• PAPST Advanced German Cooling System
• Max Severance Thickness: 3/4"
• Max Cut Thickness: 1/2"

I ordered this little gem after ordering another one from another company that turned out to be lemon, but not this one. This light weight cutter is only light to carry but cuts like a big unit. I watched a youtube video first before purchasing it. The vid shows a guy cutting 3/4 plate with it so I had to try it myself, guess what?!? Mine seemed to cut faster than the one in the vid. An easy to use, no fuss, clean cutting and huge bang for your buck tool. I suggest it to pros and bumblers too. Very nice to take to job site. As small as a shoe box on its side. I got it sent to me standard shipment and still it arrived two days from order date, TWO DAYS! So much better and cheaper than gas cutting. This is the one folks! I was also impressed that the company called me to make sure I was happy with it, outstanding! I will buy from these guys again. Kris

Buy LT5000D Lotos LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" clean Cut Now

Considering the average price of plasma cutters I took a leap of faith by purchasing one of the lower priced cutters. I was not disappointed. Ordered from the Lotus store front before it had any seller rating, and was pleasantly suprised at the prompt delivery.

Pro's: Great bang for the buck.

Pretty simple to operate==>watch online video.

Good cord lengths.

Just plain cool to operate.

Con's

As fore mentioned, the lack of plug should have been better noted.

The user manual is severly lacking as far as cutting and reccomended voltages.

The manual tells you on one page to touch metal with tip and then two pages later it says to maintian a 1mm distance?

Tip's

Cleaning your work is really important the + & must have good contact. The current spikes generated by the increased impedance of bad contacts is a good way blow 15amp power strips.

Start Thin and work your way up.

Wear The Right Clothing! molten metal spraying out at 66psi can cause early male splattered baldness.

It does say operators should be certified to operate the equipment, wonder if that means something.

Read Best Reviews of LT5000D Lotos LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" clean Cut Here

Ok, I bought this because I like to tinker and do a little hobby welding. It came fast as usual from Amazon, pretty easy to hook up, you will need to buy the plug for which ever you decide to run, I used 220volt. Made a few practice cuts and worked like a charm, cut right through 3/16" steel plate and made quick work of the 1/8" diamond plate I was testing it on. I didn't get back to it for a while and got started on a project, made a few cuts then it just quit working...not sure what happened but it happens, I checked online and found that I was past the return time for amazon, I sent some e-mails and was quickly contacted by Lotos. They sent a link to some videos and trouble shooting tips, unfortunately that didn't fix it. Lotos told me to send it back and they would replace it, in fact they had shipped it out to me as soon as I put it in the box, they didn't even wait for it to arrive at there facility, just sent the new one. For the price you can't beat it, and when the company backs there product like that what could you possibly have to lose?

Want LT5000D Lotos LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" clean Cut Discount?

I ordered this for my husband for his birthday. His intended purpose was to do automotive restoration projects as well as some art projects. We were a bit concerned with ordering because of the low price relative to similar looking machines from various other merchants. When the order arrived, we were pleasantly surprised. It was packaged well and the instructions were straightforward and clear. The visible aspects of the case and controls appear well made.

The machine comes without a plug and you can wire it for 110 or 220. His shop didn't have 220 wired so he put on a 110 plug. It worked quite well for light duty work on aluminum and sheet steel. When he moved on to some heavier gauge (3/16 and 1/4 inch mild steel) the shop 110 fuse would blow at the required power settings. He then wired the shop panel for a 220 outlet and put the appropriate plug on the cutter. It then worked perfectly for the heavy gauge projects. If you are intending to do light duty work, 110 is convenient... if you want to cut heavier material, go for 220.

I recommend this machine to anyone wishing to get started in plasma cutting. The duty cycle for cutting is certainly plenty for any projects we have in mind. His last project was to restore his late grandfathers large welding table that had been cut in half to make two smaller ones. We are quite happy with this purchase!

p.s. my husband helped with the details of this review :-)

Save 30% Off

What a GREAT machine. Since purchasing my Lotos LT5000D plasma cutter earlier this Spring, I have been using it extensively to cut the sheet steel for lawn art, cut the rebar for window well grates, and the demolition of various steel structures. It has worked flawlessly and with consistently good results. The unit is very easy to set up and operate. After connecting the air pressure regulator to the back of the unit and the power plug to the input wires the unit is ready to go. Simply supply compressed air at 70 psi (the unit requires about 3-4 cfm at 70 psi), the work grounding wire, and the plasma torch and you're ready to start cutting. The torch cable is about 10 feet long so there is no problem being able to move around the work area. I have found that the unit works much better on 220V but I have used it on a 30A 110v circuit with good results on 12 gauge steel. For anything thicker than that one should connect the cutter to a 220v circuit.

Cutting 12 gauge steel (about 0.1 inches thick) requires a torch current of 30 amps for which the unit has a 100% duty cycle so one can cut continuously. To cut 1/2 inch material requires 50 amps but the cut is still fairly clean. I have used the unit to cut 3/4 inch steel, but that is the upper limit of what this unit can do (Lotos states an upper limit of 1/2 inch so I was pushing the unit to do the 3/4 inch thick steel). I have used it to cut 1 inch rebar by doing a partial cut, rotating the rebar and continuing the cut.

Most of my work is with mild steel but I have used the plasma cutter to cut aluminum, stainless steel, and copper. The stainless steel cuts like mild steel (maybe even better due to its lower thermal conductivity) whereas the aluminum and copper are harder to cut. I have not experimented with various thicknesses of aluminum but I would guess the upper thickness limit is about 1/4 to 3/8 of an inch.

The unit is very portable and can be easily transported to other locations provided that an air supply is also available as well as a sufficient electrical service.

I have recommended this unit to other who have purchased it and are equally pleased with its performance.

A very nice plasma cutter.

Campbell Hausfeld CHN10299 5/8-Inch to 2-Inch 18 Gauge Brad Nailer

• Adjustable depth mechanism helps you control the depth of drive in various types of wood
• Quick clear nose provides easy access to jammed nails
• No-mar tip will not dent the wood surface
• Rubber comfort grip for easy handling
• 1.3 avg scfm @ 90 psi

Though this is the first air nailer I have owned, I have used a few in my life (also, I do have a 16 gauge Porter Cable "Bammer" finish nailer). After reading up on what features to look for in an air nailer, I chose this model.

It uses very little air, which is good because I only have a small compressor. It also has a directional exhaust to keep the air blasts out of your face and a padded tip to avoid marring the workpiece. The grips are very comfortable. I found that setting the nail depth was easy and accurate, as was loading the nails into the magazine. The heft and feel of this nailer is that of a good quality tool. Though I probably don't need to use 2" brads on most of my projects, it is good to have that option if and when I need it.

Basically, the only complaint I had was that the little bottle of oil that was included with this kit had a cracked cap, which allowed some oil to leak out in the case during shipment. Otherwise, this is a very solid brad nailer at a great price. I highly recommend it!

Buy Campbell Hausfeld CHN10299 5/8-Inch to 2-Inch 18 Gauge Brad Nailer Now

I needed a brad nailer for nailing some trim and toe kick in a kitchen. I wanted a Paslode for I have had previous experience with their products. Being a homeowner on a budget, I wanted a nailer for under $120. At the local hardware store, the salesman confirmed my thoughts about Paslode being an excellent choice. Paslodes cheapest brad nailer was over $150. Way too much money. I asked the friendly sales person what he would recomend. Supprisingly he recomended the Campbell Hausfeld 2" brad nailer. He stated they have sold tons of them, and they hardley ever come back. So I bought it. WOW. I was impressed, nice balance in hand, adjustable air port, depth control. The best feature is how little air it uses. My 4gal compressor hardly ran at all. It will drive 2" brads into oak with out a hitch. At $50 the only thing I can complain about is the tool oil it came with leaked in the case. So the nailer was coated in tool oil. Oh well. For home use I strongly recomend!!

Read Best Reviews of Campbell Hausfeld CHN10299 5/8-Inch to 2-Inch 18 Gauge Brad Nailer Here

I received this nailer as a gift, part of an air compressor combo pack ($79 Menards sale). I have previously used other, more expensive nailers and after 2 full days of heavy use, this nailer has impressed me. Although Campbell Hausfeld has been around for a very long time, I was afraid their quality has slipped as their products seem to be available at every discount and overstock retailer. To my surprise, this tool seems well made, and includes a nice set of features. I particularly like the ability to use 2-inch brads, a feature typically found only in nailers at twice the price. I may never need to buy a finish nailer. I also like the adjustable air port and contoured rubber grip. If you're looking for a decent brad nailer with enough money left over to buy the hoses and accessories you need (or another tool for that matter), give this a try.

Want Campbell Hausfeld CHN10299 5/8-Inch to 2-Inch 18 Gauge Brad Nailer Discount?

This has misfired or double fired a couple of times and other times works great. I am hesitant to use it where it would be very visible or where touchup would be difficult (like stained material).

Save 34% Off

I purchased this nailer for a specific small project. I choose this inexpensive unit thinking I'd seldom have a use for it. I've found it very handy to tack material in position before fastening with a framing nailer in two situations. It's very light and is easy to handle while holding a heavy piece of material with the other hand. Material doesn't move as the brad penetrates as often happens with framing nails following the grain or hitting a knot. Once tacked in position, the brads prevent the framing nails from moving the material. Every now and then I actually use it for it's intended purpose of fastening trim.

I'm very satisfied with the quality and performance of the tool. I've had one jam which was easily cleared with the quick release clamp (hit a knot I think). It's easy to adjust depth and quick and easy to add brads or change sizes.

A great tool!

Emglo Air Power AM782HC4V 1.1 HP Continuous 4 Gallon Electric Hand Carry Compressor

• 4.0 CFM delivered at 90 PSI pump provides rapid recovery
• Oil lubricated pump improves durability
• Cast iron cylinder enhances pump life
• High-flow regulator for increased performance
• 4 gallon twin stack tank design with proven acceptance in the market;Dual soft start valves assist in cold weather start up

I have had my Air-mate for almost 12 years. It was made by EMGLO and I have used it to finish out over 30 residential homes and eight commercial properties in the lower 48.

I looked at all kinds of compressors but I needed one that was portable, dependable, and could take the abuse of being moved around a job site and across country.

After due dilligence, I decided on this one.

I clean the air filter, check the oil now and again and it has never refused to preform.

It's a little hard to get started on really cold days, but aren't we all.

Truly, one of those tools that stand the test of time.

Buy Emglo Air Power AM782HC4V 1.1 HP Continuous 4 Gallon Electric Hand Carry Compressor Now

I bought a used rental unit from my job 4 1/2 years ago and it has been great. It will run an impact, die grinder, drill, cutoff tool and more. It does need time to recover so it will not efficiently run them continuous. It is great for inflating tires and other small jobs and is capable of other larger jobs. Overall the unit is over 11 years old and I have had to put a capacitor and power switch on it an no other problems. Good for the novice or the professional. Also is small enough to provide mobile air power which is a plus.

Read Best Reviews of Emglo Air Power AM782HC4V 1.1 HP Continuous 4 Gallon Electric Hand Carry Compressor Here

I just bought a used AirMate two tank 4gal for $75.00 (it is the 1.5 HP, not the 1.1) and feel redeemed after spending $125.00 (to much money) on a used Dewalt/Emglo One 4-1/2gal tank unit that blows a little oil.

In comparing the two to each other, I see no difference in motor or compressors and the only difference is in the one or two tank configuration and one compared to two line hook ups. As stated on some reviews of the one tank version, it has problems with pressure valve adjusting (sticking or not working) as does the old unit I bought.

All in all, if I was to have a choice between the one or two tank versions new, I would buy the

two tank version hands down. I don't know what went wrong with the one tank configuration, but it could be the extra money they had to spend on dual hook ups; I just don't know, but this is the configuration that is supposed to be the hot shot go to construction compressor. NOT

Also, the cheapest place I could find for the pump rebuild kit was Jacks Small Engines at about

2/3's what anyone else is asking, but found them after I had made the purchase; Figures!

Want Emglo Air Power AM782HC4V 1.1 HP Continuous 4 Gallon Electric Hand Carry Compressor Discount?

I bought a Emglo air mate the 1 1/2 h.p. at a garage sale and it has been great until I burnt up a starter capicator.Burnt right in the spot where the info about the capicator is. Could anyone help me with the info so I can buy one locally?

Save 35% Off

I've owned this model Air Compressor before. It is tops.

Not so sure about the service. For some reason two were shipped, of course I only needed one. But Amazon "sold" the sale to King Tool, so Amazon's famous return policy did not apply. After testy exchanges with Took King I ended up keeping both compressors and bartering one to a friend.

In the future, I'll buy larger ticket items where I can carry them out of the store