Hitachi EC89 4 Gallon Twin Stack Air Compressor

• 4 Gallon Twin Tank
• 13 Amp Direct Drive Induction Motor
• 3 CFM @ 90
• Only 57 pounds
• cast iron cylinder for extended life
• 13-Amp direct drive induction motor for efficient and reliable performance
• Cast iron, oil lubricated pump for cooler operation and greater longevity
• Comes with a 1-year limited warranty
• Lightweight for easy jobsite transport
• Manual reset thermal overload protection stops the motor in case of overheating

I have had this A/C for years and never a start issue, even at 30*F, but I use their spec.for oil, synthetic diesel type. NOT 30w. Rotella Shell 6T is the best. Use tha in all my A/C's. That is why the bad review . Also you need a 12ga or larger ext. cord if you are using one. 4 stars b/c the design could be better, no roll cage,gauge panel... hard to add filter and extra QD's without them sticking out and almost ensuring damage.

Buy Hitachi EC89 4 Gallon Twin Stack Air Compressor Now

I bought a Hitachi compressor to run a nail gun while replacing my garage roof. The salesman told me his personal experiences had been good with the same model. When running my unit seemed adequate for the job at hand. It was the running that was unreliable. The compressor was extremely sensitive to cool temps failing to start and tripping the thermal overload shutoff. If the unit was left in the garage overnight in mid 40 degree temperatures it would not start. The temperature was never even close to meeting the low temperature range advertised. The starting problem continued to get worse to the point it would rarely start even warm. Another problem developed where the unit would shut off well before reaching the upper pressure limit of 135 PSI. The performance was entirely unacceptable.The Hitachi authorized service center has had the unit for three months and has been unable to get parts for the repair. The first unit failed in a similar way and I got a like replacement within 30 days. The second unit started to fail the same way and I should have brought it back inside of 30 days.

Read Best Reviews of Hitachi EC89 4 Gallon Twin Stack Air Compressor Here

Purchased this exact model in 2002. I use this for cabinet and trim install. Works excellent with 15-18 ga nailers. Even use occasionally for my air drill when installing cabinets. Will turn on after each hole drilled but still maintains enough pressure for light use with this type of tool. This unit lasts. I have used it at least 1200 hours and my regulator went bad( from me banging it in to stuff) and its not worth $100 for the switch assembly( toolpartsdirect). I am only replacing because I get a new compressor for $195. Brand new for $95 more. () Anyway, this is a great buy, considering similar model are $250+ and the oiled cylinder will stay clean and maintain good compression as long as you change the oil once or twice a year depending on usage. Great for home enthusiast, good for commercial/construction.

Want Hitachi EC89 4 Gallon Twin Stack Air Compressor Discount?

i am a roofing contractor so i shoot millions (literally) of nails. don't know about the cold weather issues, can't say on that i am in SoCal but i can tell you that these little Hitachi electrics are the best out there. I've used Campbell Haus, Husky, Dewalt, Rigid, POrter Cable the list goes on. Right now i have around 12 compressors.

one of the best ones, for small electric units, are the Hitachi.

I have a pile next to our tool room of broken Campbells and others and for sure don't buy the Husky total garbage (I've got 3 of those in the pile, they cannot be fixed).

Campbell Haus used to be american made, in fact i have a 12 year old gas unit up until last year when it finally catostrophically failed. now of course they are not american made.

If you even take these other models to a compressor repair company they wno't fix them for you. The hitachi can be repaired and it's worth it, usually.

If you want your compressor/tools to last get a good in line filter and water remover (when air compresses, it gets very hot, condenses water vapor and you get water in the line, the tank, your tools, etc). A decent filter can run $50.

if there is a compressor out there "made to work in freezing temps" i've never seen it advertised and i suspect there isn't muich diff between them in that regard but can't say for sure. didn't realize it was a problem, i admit but saying these htiachis are junk, not so, i can assure you.

Save 57% Off

First off, this is a nicely made machine from all appearances and my out of the box feeling was total satisfaction. It worked well enough, about what you would expect, I was perfectly happy. I spent extra to get a nice tool that I could have for a long time. Unfortunately it will not run when its cold out side. It just trips the breaker, I can get it to run if keep resetting the breaker (like five or six times or more in a row, it take 15 minutes or so to get it running). When I called Hitachi at the supplied number a very easy to talk to man told me that none of the Hitachi air compressors will work in temperatures less then 40, its just the way they are designed! He suggested that I keep it inside and only take it into my shop when I want to use it! Its too bad that they apparently build things just good enough to work under ideal conditions. Do not buy this unless you live in the tropics. Hitachi has lost me as a customer forever! Total junk that cost me over $200. Never again.

Eastwood Air Compressor Water Moisture Separator Filter

The product arrived before expected. The unit is well made and works great to remove the moisture from my air compressor that I use for my material blasting cabinet. Without the separator I had problems with the blasting material clogging the nozzle. With the separator in line the nozzle remains clear and I can blast as long as I need without having to disassemble the nozzle to clean the debris. The filter material is easy to remove and clean and/or replace.

I recommend this product.

Industrial Air ILA4546065 60-Gallon Hi-Flo Single Stage Cast Iron Three Cylinder Air Compressor

• cast iron, three cyclinder, oil lubricated pump
• one-piece cast iron crankcase and 12 inch caast iron crankcase
• 240 volt heavy duty induction motor
• splash type lubrication
• equipped with pressure gauge and on/off switch

Bought this compressor and is the best output compressor Ipurchased bought , and very quiet running , comes with cord which is a big plus , very fast input ,

Save 11% Off

Campbell Hausfeld AT1251 30-Pound Capacity Sandblaster

• Portable, lightweight sandblaster ideal for home improvement projects
• Removes paint from furniture and concrete; eliminates rust from metal; etches glass and wood
• Requires 9.0 scfm at 90 psi; 125 psi maximum
• Includes ceramic nozzle and shoulder strap
• 1-year warranty; measures 16.80 x 5.30 x 14.30-inches (L x W x H); weighs 5.3-pounds

I bought this sandblaster for a few weekend projects. It is very easy to use, and works fantastic! I used it to sandblast engine cases on my 1960 Harley. I purchased a grit called "Starblast" on the recomendation of my local supplier. This stuff worked great in the Cambell Hausfeld, and gave me professional looking results.

Buy Campbell Hausfeld AT1251 30-Pound Capacity Sandblaster Now

Purchased this to help restore a fire hydrant, It worked well. I used reqular play sand which I screened to get small rocks out. The blaster worked well even with this and no special sand.

Read Best Reviews of Campbell Hausfeld AT1251 30-Pound Capacity Sandblaster Here

For under $50.00 I was very skeptical if this was going to work or not. It works DAMN well for the price. My only problems were with the sand. There were some larger pebbles that would jam up in the nozzle. A quick twist and they were gone but it was an inconvenience. I ended up sifting the sand with a screen and the reliability was perfect. I was using medium grit... I suspect that fine grit would have been less difficult to blast with. This sand blaster was used to clean the frame of my Jeep Wrangler. I just took a hammer to knock off the heavy stuff and cleaned it up with the blaster. GET GOGGLES... not glasses. I'm still plucking sand from my eyes.

Want Campbell Hausfeld AT1251 30-Pound Capacity Sandblaster Discount?

Works great small jobs, but I wouldn't try to do anything bigger than a few odds and ends. Very straight forward set up and assembly. I just poured in some play sand directly from the bag and it worked great with no clogs. Definitely need goggles and need to work in area that you don't mind looking like a beach when you're done.

Save 41% Off

I guess since I didn't pay much for it I shouldn't expect much. You have to hold the tip less than 2" from what you are working with. You need to shake canister often so material will come out after level is down to 1/4. I tried using sand but it didn't work and had to use black beauty for the job.